Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF Dujdsyxhq Uopfx Aahew - Type plate compressor, year of manufacture 2005 - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2016, functionality: fully functional, Timber sawing line with horizontal band saw and timber outfeed mechanisation, including control cabinets and hydraulic unit. The roller conveyors are each 11 metres long. The mobile band saw is set up stationary and axles, wheels, tow bar and mudguards are present. Comes with 12 associated saw blades. Available from mid-April/May Dedpfx Aeypat Ioahjuw Mobile saw Wimmer Zenz BN110, year of manufacture 2016, equipped as follows: Manufacturer: ZENZ Type: MOBILE SAW (MOBILSÄGE) Model: BN 110 Equipment: Clearance: 110 x 130 cm Cutting width: 95 cm Cast iron wheels, 850 mm diameter Band saw blade width: 100 mm Drive motor: 22 kW Length: 11 m with drawbar Width 2.55 m, height 2.70 m Weight: 3,500 kg Vertical support: 5.00 Log turner: 1.00 Level adjustment with claws: 4.00 Log roller: 2.00 Pre-cutter: 1.00 Official operational permit for overrun brake: 1.00 SPS control Band saw blade 6000x100x1.1 mm stellite Water cooling with 20 l barrel 20 l barrel and nozzle mounted on the blade guide Chain turner: 2.00 Extension 3 m without support beam Chip collection box

Condition: used, Year of construction: 1980, functionality: fully functional, 1 branded driven splitting wedge Arta/C, workshop overhauled Dujdpfx Ajqvz U Esahsw New bearings for pressure rollers and motor new tips opening width: 430 mm

Condition: new, functionality: fully functional, - New ball slewing ring - Outer diameter 1100 mm - Inner diameter 878 mm - Height 50 mm Dedpfxowt Ry Uo Aahouw - 8 x M16 mounting holes - Renowned German manufacturer - Suitable for VK 26 models - Available immediately

Condition: used, - used spiral roller conveyor - 2 pcs separating lamellas - 6,000 mm length Dedpfxow Ag Dzo Aahouw - 800 mm roller width - approx. 1,000 mm overall width - approx. 150 mm roller diameter - approx. 430 mm roller pitch - SEW feed gear motor

Condition: reconditioned (used), • 150 mm cutting height • 750 mm feed-through width • 350 mm wide slat bushing with used spacer rings and saw blades • Saw shaft fitted with new bearings • 55 kW saw motor Dsdpjw I Sg Dofx Aahouw • 1,170 mm working height • Infinitely adjustable feed • Roller lifting with hydraulic hand pump • Machine workshop-inspected • Machine newly painted

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing Dsdpfov Ny Nxox Aahsuw - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Logs Wagon - Trolley - BONGIOANNI Technical Details : Year - 1997 Wagon length - 7 m Number of staples - 4 Eqipment Consisits : 1- Wagon - trolley 2. El. Cabinet 3. Comand pult 4. Hydraulic drive Djdpfxerx Rq Es Aahouw

Condition: like new (used), Year of construction: 2021, operating hours: 370 h, functionality: fully functional, For sale is a complete sawmill line from Woodmizer, consisting of: LT70 Remote, EG800, 3-log deck, 6 cross-conveyors, log loading system, and more. The sawmill line is fully functional. The customer service has been recently updated. The line is still in operation and can be inspected at any time. The LT70 Remote is equipped with the largest hydraulic package and the SLP2 set for calculating cutting thickness. The price also includes approximately 100 saw blades (value approximately €3,000) for the LT70, 11 saw blades for the EG800 (value approximately €1,400), various spacer pieces for the EG800 (value approximately €1,300), and more. Duodpfxjzd Nqds Aahow If you have any questions, please do not hesitate to contact me.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Equipment: cabin, crane, For sale: Baljer&Zembrod timber handling trolley. Year of manufacture: 2000 Crane type: OBX II Duodexb A Evjpfx Aahew Maximum reach: 13.2 m Lifting capacity at maximum reach: 2,200 kg without grapple Air-conditioned operator cabin Power cable wound on reel Track length: approx. 80 m

Condition: used, Meassuring frame for logs and timber type Rema 9001 Maximum meassuring field 700 mm Duedezd Azvopfx Aahow

Condition: good (used), Year of construction: 1996, functionality: fully functional, Complete Kara Master sawmill Year of construction 1996 CE mark The sawing line consists of 2 Kara Master 08M sawing machines 1 Kara edger Technical data of the KARA MASTER machine Motor: 37kW / 1500 rpm Hydraulic unit: 5.5kW / 1500 rpm / 50 Hz Transfer table 9.5 m long, 0.7 m wide Weight, kg approx. 4900 kg Saw blade diameter 800-1200 mm (with undercarriage 800...1100 mm) Cutting height: 295...495 mm Recommended speed for the saw blade diameter 800mm 1300r/min 900mm 1170r/min 950mm 1100r/min 1000mm 1050 rpm 1100mm 960r/min 1200mm 880 rpm Diameter of the blade hole: 50 mm 015 mm, distance from blade hole 50 mm 9 m x 660 mm Additional equipment Pump: 34 l/min, 150 bar (blade shaft speed 1100 rpm) 180 bar from the tractor hydraulics (only in mobile) Stepless feed 0...130 m/min Kara Pro 200 control unit Programmable up to 120 sizes in steps of 0.1 mm. Programming addition during sawing, storage of the last dimension used. 9 Feed speed, m / min infinitely variable 0-130 m / min Duodpjum I S Eefx Aahsw Kara Edger Type 32-250 Year of construction 1996

Condition: ready for operation (used), belt conveyor for chips and wood waste and bark functional length approx. 3500mm width approx. 400mm BEVI motor 2,2 kW, 400 V Dodpfx Aajpkzwmshouw

Condition: good (used), functionality: fully functional, I am offering a panel saw with a conveyor belt for collecting cut-off pieces. It has been fully calibrated and offers a cutting accuracy of 1 mm. It is currently located in Chlumec nad Cidlinou. We can demonstrate its operation if you visit. A discount may be possible for a quick decision. Dodpfezdrnlox Aahsuw

Condition: refurbished (used), 1 set = 8 guides suitable for the ESTERER SS 56 or SS 71 gang saw, completely refurbished, i.e. all sliding surfaces re-milled to precise angles. 1 set of upper guide shoes, bore 110 mm Ø, height 250 mm Duodpfxjw Eu Ake Aahjw 1 set of lower guide shoes for bearing 6210 for SS 56

Condition: excellent (used), Hydraulic feed unit 2DA1F with 2.2 kW motor, 1430 rpm, with planetary reduction gearbox for speed reduction, electric adjustment via worm gear motor, Hydraulic feed unit 2D35ZK with 4 kW motor, with bevel gearbox, control lever with 2 sensors, e.g. for SCHULTE HB 12 band saw Dedpfx Aolxzhtoahsuw

Condition: used, cutting height (max.): 1,200 mm, cutting width (max.): 1,200 mm, cutting length (max.): 6,000 mm, spindle motor power: 5,000 W, fixed bench, pivoting head chain with diagonal vertical movement Duedpfeyzrcmsx Aahow automatic cutting waste collection mat

Condition: excellent (used), functionality: fully functional, Robust EWD reduction gearbox for gate drive. Dsdpfxezdiq Ss Aahouw Shaft 100 mm. Pulleys 900 x 280 and 560 x 450 mm. Pulleys attached to the shaft with tensioning elements. Used for 2 years. Suitable for all EWD / Esterer gates.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: 0162463201, For sale: ÜSTÜNKARLI UHYB-120 industrial horizontal band saw I am selling a robust ÜSTÜNKARLI UHYB-120 horizontal band saw designed for professional log sawing in sawmill and wood processing operations. This is a heavy-duty industrial machine with a solid steel construction, hydraulic log handling, and control from a central panel. Key specifications: Manufacturer: ÜSTÜNKARLI Model: UHYB-120 Year of manufacture: 2016 Duedjy A Dymspfx Aahsw Serial number: 0162463201 Weight: approx. 9,650 kg Dimensions: 12,350 × 4,500 × 4,060 mm Power supply: 3-phase, 380–400 V / 50 Hz Total power: 59.4 kW Saw carriage speed: 0–42 m/min The saw is equipped with hydraulic log rotation, hydraulic clamping hooks, support arms, powered rollers, and a saw head carriage that moves along rails. This makes it suitable for precise and efficient processing of logs into lumber, beams, planks, boards, or pallet material. The machine is suitable for sawmills, lumber manufacturers, and companies involved in wood processing. Technical documentation / operating manual including technical data, maintenance instructions, and a list of spare parts is available. Price negotiable. If you are seriously interested, I will provide more information, photographs, or the possibility to inspect the machine.

Condition: excellent (used), PRIMULTINI Band Saw Line SIC 1600 – CFE - IFB 1. PRIMULTINI Band Saw SIC 1600 -Roll diameter 1600 mm -Roll width 245 mm -Motor 75 kW 2. PRIMULTINI Band Saw Carriage Type CFE -3 Clamping Blocks -Max. Log Diameter 1000 mm 3. PRIMULTINI Operator's Cabin Complete with Control System 4. Complete Conveyor System -Cross Feed Conveyor, 4-strand, Length approx. 12 m -Hydraulic Log Feeder Duodpov R Edqjfx Aahsw -Movable Unloading Roller Conveyor with Pressure Rollers -Cross Reloading Conveyor -Conveyor Belt Under the Roller Conveyor for Slabs -Vibrating Table for Slabs -Roller Conveyor with Cross Unloading -Roller Conveyor with Cross Unloading The complete system was built in 1999

Condition: excellent (used), Catalogue No.: 7502 TECHNICAL DATA Feed Carriage DTBC-P — Wheelbase: 750 mm — Feedstock diameter: 100–800 mm — Total lateral travel: 160 mm — Log rotation (left/right): 360° — Travel speed (forward & reverse): stepless — Hydraulic pump motor power: 5.5 kW Auxiliary Carriage DTCB — Wheelbase: 750 mm — Lateral travel range: 160 mm — Log rotation (left/right): 360° — Lateral movement motor power: 1.1 kW — Feed carriage dimensions (L/W/H): 2850/1400/1500 mm — Auxiliary carriage dimensions (L/W/H): 950/650/750 mm — Total weight: 1450 kg ADVANTAGES – Manufactured in Poland – Robust construction – Includes hoses and chains – Used machine, in very good condition, fully refurbished (invoice available for inspection) PRODUCT FEATURES The auxiliary carriage is designed to support logs or cants on the infeed side of the sawmill within a diameter range of 100 mm to 750 mm. The feed carriage is intended for feeding logs and cants into the sawmill within a diameter range of 100 mm to 750 mm. The machine facilitates log handling, including clamping the log, lateral movement, and rotating, all powered by hydraulic drives. Net price: 59,900 PLN Net price: 14,260 EUR (based on 4.2 EUR/PLN exchange rate) (Prices may vary depending on currency fluctuations) Duodpfx Aaeza Eaushjw * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and brand names are used for informational purposes only, to enable identification of the goods. We only resell items that have already been placed on the market by the manufacturer. We have no business relationship with the manufacturer.

Condition: used, Horizontal Nienkemper BS0 band saw Dsdpfx Aeci Df Aoaheuw Roll diameter: 1100 mm with manual feed carriage

Condition: used, heavy-duty gate tension car, manufactured by Linck, type Va, with auxiliary car Vy. Dujdpfoc Ulvbjx Aahow

Condition: good (used), Primultini band saw Roller diameter: 1300 mm Roller width: 140 mm with Planomatic system Dsdpfx Aaod Sclhehouw

Year of construction: 1992, condition: used, Raimann B110S band saw Roll diameter 1100mm Dujdpfsb R Ty Asx Aahow Roll width 100mm Cutting width to the right and left of the saw blade 200mm Maximum cutting height 400mm