Condition: used, Year of construction: 1970, functionality: fully functional, Complete, fully operational sawmill line for sale due to restructuring. The entire system can also be purchased in individual components. Fpodsx E Sn Dspfx Akysn Price upon inspection.

Condition: good (used), Year of construction: 2002, functionality: fully functional, I sell a block machine for formatting scantlings into pallet blocks. Possible dimensions of blocks from 70 to 160. very good condition. Fedpfx Aksvbcl Hoyspn

Condition: used, Year of construction: 1986, functionality: fully functional, We offer this used Brenta vertical bandsaw with an automatic turning carriage. Year of manufacture: 1986 Vertical saw: Type: Tuonyelec Machine no.: 407482 S230 N8586 Wheels: 125 cm Saw carriage: Type: Progress 750 Machine no.: 409621 S268 N1143886 Maximum sawing length: 12 meters The various photos show: - overall view of the saw - saw machine plate - saw with dust extraction pit - automatic line behind the saw - pit under the lower wheel - feed line from the outside - feed line as seen from the inside - discharge line inside - additional lifting table for re-sawing pieces. This table can return the log to the carriage using a chain - collection bin behind the discharge line - collection bin as seen from the other side. With a red button that can be operated from here and in the machine room - discharge line in its entirety - machine plate for the saw carriage - saw carriage in the outside position, where the log can be placed - control room behind the saw - control room for electronic dimension setting and operation of all feed and discharge lines - electronics mounted on the wall opposite the saw. Control current with relays which can also be operated manually - Compressor: Atlas Copco GX 11 FF - Type plate compressor, year of manufacture 2005 Fsdpsyxhq Ujfx Akyjpn - Air dryer: Grass Air type DW 31 - Stellitem adjustment blocks for the guides through which the saw blades pass Technical information: - the machine must be operated with air, hydraulics, and electricity (and control current) - the wheels (upper and lower) were ground approximately three years ago and can last for many more years - control cabinet for the feed line was renewed in 2025 - at the end of the feed line is a crosscut saw that can cut boards, planks, or beams. This can be adjusted with electronic thickness adjustment. This Brenta vertical bandsaw with an automatic turning carriage is an excellent combination. The stated price is based on the Incoterm EXW, including disassembly by the buyer. If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors Fedpfoxlym Eox Akyjpn - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors - Automated stacking machine - Waste conveyors

Year of construction: 2026, condition: new, • 260 mm cutting height • 750 mm cutting width • variable feed rate 5-30 m/min. • 2 x 75 KW sawing motors • 3 KW feed gearbox • 70 mm Ø spindle diameter Fpodpfjbu Rqpex Akyon • 1 set of spacer rings • electrical height adjustment of feed rollers • 400 mm Saw blade diameter • complete electric control cabinet, incl. all cables • operator panel • painted in Colour RAL 6011 • Dokumentation in E • 5.500 kg weight

Year of construction: 2025, condition: new, functionality: fully functional, - 350 mm max. cutting height Fpjdohkh Npjpfx Akyen - 75-250 mm min/max Cutting width - 100 - 350 mm min/max logs - 18-80 mm side board - 1,8 - 6m Cutting length - 550 mm saw blade diameter - 4/6 saw cuts simultaneously - 5-30 m/min variable feed speed - 2x30 KW and 2x22 KW saw motors - 3 KW SEW feed gear motor - automatic 6-fold width adjustment - infeed table with 3 fold turning device - 2 centering roller pairs pneumatic pressure - driven infeed roller with 0,75 KW and pneumatic pressure - 2 driven outfeed roller pairs with 0,55 KW each - 4 pneumatic pressure roller pairs in the outfeed

Condition: used, functionality: fully functional, Used merry go round chipper canter line from the Austrian producer Lindner. The canter is equipped with two 37kw electric motors and the ripsaw with one 90kw electric motor. Very simple and good working line Reform knife grinder machine included. Loaded on truck. We can also include dismantling. Subject to prior sale. Fpedpjzrn Ecsfx Akyen

Condition: as good as new (ex-display), Year of construction: 2015, functionality: fully functional, saw drive: 380 W, PRIMULTINII SIF 1600 band saw, in very good working condition. Fpodpfx Akjyha A Tjyen

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Technological line of the Polish brand BRODPOL for sawing medium-sized logs with a length from 1,800 to 3,000 mm and a diameter from 120 to 480 mm Year of production: 2023 Technical condition: very good The line consists of the following machines and devices: 1. Log magazine/feed conveyor with inclined discharge, type PKS 2200/2912 Year of production: 2023 2. Driven prism-shaped accelerating table, length 5,000 mm, equipped with a pneumatic log discharge mechanism Year of production: 2023 3. Driven prism-shaped accelerating table, length 4,000 mm, equipped with a log turning mechanism Year of production: 2023 4. Chain-fed circular saw unit TT5/700/480 G Year of production: 2023 5. Receiving roller table with separating plates, “bag” type, length 7,000 mm Year of production: 2023 6. Centring table SC 8000, equipped with a mechanism for stopping one cant Year of production: 2023 7. Double-spindle multi-rip saw WP 220 Year of production: 2023 Fpsdeziqnuepfx Akysn 8. Central belt conveyor, length 38,000 mm, belt width 500 m Year of production: 2023 Additionally, the line includes a waste receiving system with an MDR metal detector and a MADREW RK 650x200 chipper from 2021, as well as a dust extraction installation with a JKF cyclone dedicated to this line. Assembly and start-up of the line are available for an additional fee

Condition: new, Year of construction: 2025, Stepfeeder MUL SF 3 For log diameter 10 - 50 cm Available in 2, 3, 4 or 5 sections Width starting from 1800 mm Height - minimum 1500 mm Heavy and solid constructed Hydraulic movement. Max 20 strokes per minute. Fully automatic loading system with sensors and controller Fpedpov Ak Ifsfx Akyon

Condition: ready for operation (used), functionality: fully functional, The following components of the machine have been renewed: Feed gearbox: overhauled in 2023 Rotor: factory-refurbished, installed in 2024 Hydraulic roller opening: installed in 2022 Extraction unit: newly installed in 2021 Infeed table: year of manufacture 2021 TECHNICAL DETAILS Rotor: Air ten, 800 mm Max. log diameter: approx. 75 cm MACHINE DETAILS Overall length: 9,800 mm Wheelbase: 8,800 mm EQUIPMENT Spare parts package Fjdpfsxr Itysx Akyspn Note: An electrical control cabinet is not included in the offer. However, the seller can supply a new control cabinet for an additional charge.

Condition: used, Year of construction: 2000, functionality: fully functional, Trolley with belt for 1500 cm saw, log loading ramp, and 8 m board conveyor with retention. Saw motor 37 kW. Fodjxvpd Iepfx Akyjpn

Condition: excellent (used), functionality: fully functional, Complete saw frame for Esterer Gatter HDE or SS 71. Fjdpfxjxw Ubnj Akyspn

Condition: excellent (used), functionality: fully functional, 2 pieces of gate uprights, heavy-duty design, for Esterer Gatter HDE or SS 71, with cover. Fedpfexw Uf Tsx Akyspn

Condition: excellent (used), Year of construction: 1999, 1. Block conveyor 2. Transverse conveyor 3. Linck FWK quick-release carriage Track gauge: 900 mm Travel speed (forward/reverse): 80/180 m/min Clamp opening: 750 mm Log length: 2.5–13.5 m Fodpsxtwwkofx Akyspn 4. Sawing unit Linck KCSU-6 Round timber diameter: 120–650 mm Drive per side: 160 kW Max. cutting height (triple): 405 mm Residual: 370 mm Log length: 2.5–13.5 m Max. feed-through width: 750 mm Cutting width min/max: 18–720 mm Split wedge opening: 560 mm Saw blade diameter: 620 mm Edger distance: 370 mm Net weight approx.: 15,000 kg Stepless feed rate adjustment: 10–35 m/min 3. Timber removal device BM 1/MBH 4. Edger cross-cut saw Linck KA 1/ACF 5. Complete hydraulic system 6. Complete electrical/control system 7. Complete circulating conveyor technology 8. Discharge mechanisation 9. Waste removal underneath KCSU Year of manufacture: 1998. Commissioned in 2000 Various tools Sale according to customer order.

Condition: used, Year of construction: 1998, LBL Brenta Oxia -max. cutting height 150mm Fedpovw Rnbjfx Akyjpn -max. passage width 1000mm -multi-blade saw with fixed saw attachment

Condition: refurbished (used), Year of construction: 2002, Sawmill ARTIGLIO Year - 2002 - ( Refurbished in 2023 ) Technical Details : - Flywheel - 1300 mm - Flywheel band - 168 mm - Max. blade length - 8860 mm - Three - Phase 400V 50hz Motors - Primary motor power - 55,8 kW - Blade tension motor - 0,55 kW - Pushing blade guidemotor - 1,5 kW - Flywheel inclination motor - 0,12 kW - Hydraulick brake unit motor - 1,5 kW - Central Crowing Equioment Consists : Fsdpov Ny Nxofx Akyjpn - 3 Log clamping pressure - Fixed hooks - Mobile knockers with 3 fixed positions - Hydraulicl log turner - El . divider with 50 works programs - Transversal vice movement with two speed motor 1,8 - 8 mt./min. - Hydrostaic advancement with steel cable towing - Comand pult - Automatic centralized rubrication - Pantograph for cable

Condition: used, Bark remover Cambio 500 in good condition Fsdpfx Akewi Iz Ijyspn

Condition: used, functionality: fully functional, BARTON log ladder - 4 steps Fjdpfx Akjwi I Iheyjpn - Width: 120 cm - Height: 250 cm

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. Fpedpevuhumefx Akyen The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 03013, BERCAR plank cutter, maximum cutting length 1100mm, maximum cutting height 170mm. Fpodpfx Aevvpb Rjkyjn 10 hp engine.

Condition: new, The new log band saw from Hauslhof is suitable for a log diameter of up to 65 cm and has good cutting accuracy. Its ease of use makes it ideal for forest owners who want to start cutting their own wood, regardless of the type of wood. It can be extended indefinitely with extension sections and can be easily assembled and dismantled. Manual feed and cutting height adjustment mean low maintenance. CE tested. Technical data: max. log diameter: 650 mm max. board width: 475 mm motor output power S6: 6.5 kW (5.5 kW S1) 400 V cutting length basic version: 2950 mm saw band length: 3658 mm saw band width: up to 35 mm band speed: 20 m/sec cutting length extension section optional: 1.95 m Fjdpfovru Ubox Akyopn weight: 335 kg possible optional equipment - extension section extends the cutting length by 1.95 m each

Condition: like new (used), Year of construction: 2023, functionality: fully functional, Centering with 2 x 3 rollers, diameter 200 x 300 mm Drive 2 x 3 kW Fodpfx Aox Eig Uskyopn Centering with synchronous linkage and servo cylinder The centering can optionally be equipped with an extraction device for easy tool change

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, Full trimmer saw - 21 sawblades, trimmer speed 110-130 pcs/min, dismantled, stored, was in use in green sorting line Fodew S Eylepfx Akyopn

Condition: used, Year of construction: 1987, functionality: fully functional, machine/vehicle number: 812 - 5547/V.01.87.110, overall weight: 19,190 kg, For sale is a well-maintained Nicholson debarking plant A 5 B for log diameters up to 56 cm. We used the machine in our small-diameter sawmill (maximum diameter 25 cm). It ran without issues until recently. The knife cylinders were replaced shortly ago and are absolutely airtight. The rotor bearings are in perfect condition. This is a very powerful and fast unit. Nicholson debarkers are straightforward to operate! - Minimum length: 200 cm - Minimum diameter: 7.6 cm - Maximum diameter: 56 cm - Weight: 19,190 kg - Machine dimensions: 470 x 251 x 335 cm incl. rotor Fedpfx Asw D Hy Sokyepn - Feed speed up to 114 m/min (currently set to 95 m/min)