Used Horizontal Panel Saw for sale (20,764)

Condition: used, Year of construction: 2023, Exhibition machine Garbsen HORIZONTAL PANEL SAW GABBIANI P Manufacturer: SCM Type: GABBIANI P80 Year of manufacture: 2023 1 unit MAIN FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLES: AN INDISPENSABLE TOOL SIDE SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING GRIPPERS: GUARANTEED PERFECT CUT TECHNICAL DATA GENERAL INFORMATION gabbiani p80 Saw blade projection mm 80 Working table height mm 950 Standard number of grippers 5 Number of grippers for versions 33/38/43 9 / 10 / 10 Number of grippers for versions 33/38/43 with FlexCut 1 unit (single gripper with double fingers included) 10 / 11 / 11 CUTTING DIMENSIONS Version 33 mm 3300x2100 Version 33 (Opt.) mm 3300x3200 Version 38 mm 3800x3200 Version 38 (Opt.) mm 3800x3800 Version 43 mm 4300x3200 Version 43 (Opt.) mm 4300x4300 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable pusher speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz rpm 4650 Saw blade diameter mm 340 Shaft diameter main saw blade mm 80 SCORING BLADE Motor power (S6 -40%) - 50hz kW (HP) 1.5 (2) Speed – 50 hz rpm 5850 Scoring blade diameter mm 200 Shaft diameter scoring blade mm 80 INSTALLATION Installed power kW 12÷15 Base machine voltage Euro voltage (400 V / 50 hz) Compressed air demand NL/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2440 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: in countries where EU standards apply, the forward pusher feed speed is limited to 25 m/min. GENERAL CHARACTERISTICS Fully automatic, PC/PLC-controlled horizontal panel saw suitable for cutting solid wood, MDF, chipboard, plywood, and similar materials. Frame and working table – Machine frame is a steel tube construction – Working table of rib-reinforced steel with Bakelite coating – Longitudinal fence on the left side Saw carriage made of steel, consisting of: – a motor for the main saw blade and a motor for the scoring blade – vertical lifting of the saw blade on linear ball bearing guides and shoes – running rollers of hardened and ground steel – balanced mass distribution for optimal cut quality – running direction towards the longitudinal fence – saw carriage drive via rack and pinion – carriage travel on cylinder guides – cylinder guides of hardened and ground steel (5-year warranty), protected by special dust wipers – pneumatic switch for fast and safe main and scoring blade change Pressure beam – pressure beam with uniform pressure across the entire cut length, recesses to prevent collision with grippers; pneumatic height adjustment via high-precision rack and pinion, pressure adjustable from 1.5 to 6 bar – dual extraction system with one unit above the pressure beam for cleaning the work table and one unit below on the saw carriage – side automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel distance: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning pusher and rear part of the machine – Positioning pusher full length, powered by a robust drive shaft. Positioning pusher control... Hsdsx Twcvjpfx Ah Njng

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Horizontal panel saw HOMAG HPP300/43/43 Profi Vacuum loading excluded Hnodpfxox I Aycs Ah Neg Cutting width: 4300 mm Cutting length: 4300 mm Max. projection of main saw blade: 125 mm 8 clamping grippers

Condition: used, No. 3248 Horizontal panel saw HOLZMA Optimat HPP 380/38/38 Used, year of construction 2003 Hnedpsxrglnjfx Ah Njg Machine still in operation, expected to be available from 19.01.2026 Cutting length 3800 mm Cutting width 3700 mm Saw blade projection 95 mm Main saw motor 13.5 kW Scoring saw motor 2.2 kW Main saw blade 380 x 4.8 x 60 mm Scoring saw blade 180 x 4.8 - 5.8 x 45 mm 7 clamps 3 air cushion tables, of which 1 with angle stop 3 roller elements on front side LKT Operating software Schnitt Profi(t) 9.0 / CADmatic V3.0 15" monitor (replaced in January 2025) V program pusher up to 80 m/min V saw carriage up to 130 m/min Machine dimensions 7205 x 6100 mm LW Sale on behalf of customer, ex location near 90471 Nuremberg, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or shipping Terms of delivery: ex location

Condition: new, NEW CAR Power Control Numerical Control with NX Cut System Software and NX Pareto optimizer Barcode labeler with software Cutting length mm 3800 Cutting width mm 3800 Blade protrusion mm 90 Front panel loading and unloading Automatic lateral aligner positioned in the blade carriage N° 1 fixed front table in bakelite with air curtain system for unloading the panels Hnsdsrufznepfx Ah Neg N° 2 mobile front tables in bakelite with air curtain system for unloading the panels Main blade, max diameter 380 mm, 15 kW motor Scoring blade, max diameter 200 mm Blade carriage speed forward 1 - 90 m/min. - backward 120 m/min. Pusher speed 85 m/min. Pusher carriage with 9 pincers

Condition: ready for operation (used), Technical characteristics Cutting dimensions : 4300 x 4300 mm Max Cutting height : 125 mm Main blade max. diameter 450 mm Motor 13.5 kW Scoring blade max. diameter 150 mm Motor 2.2 kW Blade carriage speed adjustable from : 10 to 125 m/min Pusher feed : 10 to 80 m/min Automatic lateral alignment device 3 air-cushion loading tables 7 pneumatic clamps Windows PC-based control CADmatic software Easy access for maintenance and blade change Quick blade change Hnedpjucitbsfx Ah Neg Suction requirement : 5000 m3/h Power and Motors Voltage: 400 V Pluging: Three-phased Power: 35 Kw Overall dimensions Lenght: 6900 mm Width: 8200 mm

Condition: used, Year of construction: 2001, Cutting width: 3300 mm Cutting length: 3350 mm Weight: approx. 4000 kg Saw blade projection: 100-(115) mm Saw carriage: Feed speed: 100-(130) m/min. Return speed: 100-(130) m/min. Main saw blade: 400-(430) mm Motor: 7.5-(11-13.2) kW Scoring unit: 215 mm Motor: 2.2 kW Pusher: Rapid feed: 160 m/min. Return speed: 60 m/min. Extraction: Air speed: 30-35 m/sec. Extraction nozzle: 200 mm / 115 mm Compressed air: Pressure: 5-6 bar Consumption: 20-30 l/min. Hnodpfx Ahevvkqgo Nsg Storage location: Nattheim

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 220.242, cutting length (max.): 4,300 mm, saw blade diameter: 350 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Cutting Data Nominal cutting length: 4,300 mm Maximum saw blade diameter (S): 350 mm Scoring blade diameter (V): 300 mm Maximum saw blade projection above table (U): 95 mm Stack Height and Panel Thickness Maximum stack height (P): 80 mm Minimum panel thickness (P): 3 mm Strip Aligner Minimum aligning force: 300 N Maximum aligning force: 990 N Hnedpfjx Sqpmox Ah Nog Additional Specifications Maximum clamp opening (K): 90 mm Working height: 970 mm Overall height: 2,020 mm Machine Accuracy Positioning accuracy: ± 0.1 mm (measured at feed-in) Cutting straightness: ± 0.1 mm over 3 m cutting length Electrical Power and Speeds Main saw motor power: 15 kW Saw carriage forward speed: 5 – 120 m/min Saw carriage return speed: 120 m/min Feed-in forward speed: up to 80 m/min (Europe 25 m/min EN 1870-13) Feed-in return speed: up to 80 m/min EQUIPMENT Strip aligner Label printer Optimization software HPO/F N5

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, cutting length (max.): 2,200 mm, cutting width (max.): 4,300 mm, TECHNICAL DETAILS Max. cutting length: 2,200 mm Hnjdpfox Tptmjx Ah Njg Max. cutting width: 4,300 mm MACHINE DETAILS Transport packages: 8 pcs.

Condition: used, machine/vehicle number: 007655, Position 1: Angular Beam Panel Saws HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 2: Panel Stacking and Offloading HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 3: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Position 4: Lift Table HOLZMA + BARGSTEDT-PROFI HKL + TSP Hsdpfswuz Irox Ah Nong

Condition: new, Year of construction: 2024, neu 2024 6254 prompt, Zwischenverkauf v Italien 15040 € 288.77 € 1 Doppelsäulenführung 3270x27x0,9 mm 40/80 m/min 300 mm 300 mm 350x260 mm rund 210 mm, quadrat 210 rund 110 mm, quadrat 110 830 mm 1.5 kW 1500 mm 1600 mm 1900 mm 590 kg hydraulicvice INCL. ADJUSTABLE CLAMPING PRESSURE saw beam moves up and down by hydraulic cylinder fast descent automatic fast up/down conrolled by feeler pin adjustable pressure according to section and type of material double safety buton for cycle start 2 speeds coolant equipment _CUTTING CYCLE_ Vice locking; Quick bow pull-down hydraulically operated; Blade rotation and cooling liquid start-up; Working pull-down; end of the cutting cycle; Stop of blade rotation and supply of cooling liquid; Quick bow lift-up; Stop of bow upwards movement; vice unlocking if selected. Manufacturer warranty until 31.12.2026 Hnodowiqndjpfx Ah Njg OPTIONS: Roller tables and band saw blades on request

Condition: new, Cutting capacity round 0°: 127 mm Cutting capacity flat 0°: 125 x 130 mm Cutting capacity round 45° right: 90 mm Cutting capacity square 45° right: 90 x 90 mm Cutting capacity round 60° right: 45 mm Cutting capacity square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m/min Motor output: 0.55 kW Voltage: 230 V Weight approx.: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting tubes, profiles, and solid material made of stainless steel, iron, etc. - Sturdy saw arm for low-vibration operation - Low-noise due to robust construction - Automatic shut-off after cutting cycle via microswitch - Quick-release vice for fast and easy clamping of workpieces - Precise, adjustable blade guides for optimal cutting results - Environmentally friendly—no need for lubricants or coolants Hnedpfxjilk Eks Ah Njg - Lightweight design makes it ideal for use on construction sites - Base frame available as an optional extra (not included in delivery) Includes: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available for an additional charge: 129 Euro (net, special price)

Condition: reconditioned (used), > Cut-off saw TS 100 c, with conveyor belt, suction belt, extraction, adjustable treadmill and saw blade. > 4 hold-down devices, new wheels and new bearings. > Machine completely overhauled and new painted. > Passage width of 600mm Hjdsfua Drepfx Ah Njng > Further details on request.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Technical details cutting diameter 280 mm saw band length 4930 mm cutting width 280 mm capacity 90 degrees: square 280 x 280 mm saw diameter min. 10 mm cutting length min. 6 mm Weight of Material maxium 400 kg/m Hsdpfex Uy Tmjx Ah Nsng cutting speed 20 - 110 m/min sawing motor 2,2 kW dimensions of saw-band 4930 x 34 x 1,1 mm total power requirement 7 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 2280 x 2680 x 2050 mm Additional information Shortest Remaining Piece Length in Single Cut 15 mm Shortest Remaining Piece Length in Automatic Operation 80 mm Feed Length 700 mm Multiple Feed Length 9999 mm Cutting Speed Infinitely Variable 20-110 m/min Cutting feed: Infinitely variable Material clamping: Hydraulically infinitely variable, clamping pressure: 20-60 bar Equipment: CNC control Machine roller conveyor, dimensions: 2000 x 550 x 700 mm, weight: approx. 150 kg Machine documentation

Condition: excellent (used), Catalogue number 7834 TECHNICAL DATA - Maximum diameter of main blade without scoring unit: 400mm - Maximum blade diameter with scoring unit: 350mm - Maximum cutting height for 350mm blade: 100mm - Main blade adjustable up/down and tiltable - Large blade guard - Spindle diameter: 30mm - With sliding table - Cutting length on sliding table: 1400mm - Cutting width at fence: 1180mm - With side table - Fence on side table adjustable at an angle - With scoring unit - Maximum scoring blade diameter: 120mm - Spindle diameter: 20mm - Main blade motor power: 4kW - Scoring unit motor: 0.75kW - 2 rotation speed settings - Table dimensions: 1120x1020mm - Table dimensions with extension: 1820x1720mm - Extraction nozzle diameter: 130mm - Dimensions L/W/H: 3650x2150x1450mm - Weight: 720kg ADVANTAGES – Made in Poland – With scoring unit – DTR technical documentation – Used saw, in very good condition Hjdpfx Ahox Arrhs Nsng Net price: 11,900 PLN Net price: 2,840 EUR (depending on the rate 4.2 EUR) (Prices may vary with significant rate fluctuations)

Condition: used, Year of construction: 2003, Cutting capacity: 5300 x 2240 x 80 mm Motor: 5.5 kW (7.5 HP) Saw blade: 300 mm Vertical cutting interface distance: 1000 mm Feed speed: 10-25 m/min Four-sided edging Pre-scoring saw unit freestanding Storage location: Nattheim Hnsdsx Twdaopfx Ah Nsg

Condition: used, saw blade diameter 560/660/710 mm cutting diameter 170/220 mm cutting range B:1000 x H 220 mm cutting speed 7- 48 m/min clamping devices hydraulic pneumatic 20- 315 mm dimensions 2,9 x 2,2x 1,95 m weight of the machine ca. 2,8 t Used plate saw - part fixures - new security componens Hjdpfx Ajxnc U Roh Nong - external control panel

Condition: excellent (used), Year of construction: 2012, Very well-maintained panel saw, from a one-man operation, with very low usage. Maximum panel size approx. 3.2 x 2.2 m Hedpfx Aoyagrxjh Nsng

Condition: used, Type 693 Euro5 Year: 1996 General data Cutting length: 3200 mm Cutting width: 2650 mm Max. cutting height: 60 mm Main saw Speed: 2870 rpm Power: 5.5 kW Max. Ø280 mm Hodpfeyac Ebjx Ah Neng Scoring saw Speed: 2850 rpm Power: 1.1 kW Max. Ø125 mm Total connected load: 8 kW Machine weight: 3150 kg

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details cutting diameter 730 mm saw band length 9195 x 67 x 1,6 mm cutting width 830 mm Control Kasto EasyControl saw band speed 12 - 120 m/min total power requirement 30 kW weight of the machine ca. 11,6 t dimensions of the machine ca. 4800 x 2600 x 2870 mm Additional information Machine is in good condition. On 7th. October 2025 the bearings of the roller wheel (belt tensioning side) have been replaced by KASTO and the switch for the belt tension was replaced. The machine can be demonstrated under power in our warehouse. Heavy-duty, high-performance band saws with a horizontally and parallel-traversing saw blade for cutting solid material, profiles, and pipes of all qualities, including difficult-to-cut materials such as titanium, Hastelloy, Inconel, etc. The optimal use of carbide or bi-metal saw blades was consistently considered during the development of these machines. Cutting range Cutting diameter: 730 mm Cutting width: 830 mm Saw blade size: 9195 x 67 x 1.6 mm Hsdpfx Ahex Uywre Nong Total power requirement: 30 kW Machine weight: 11600 kg Machine dimensions (L x W x H): 4800 x 2600 x 2870 mm Equipment: Carbide package With driven heavy-duty roller conveyors for the infeed and outfeed sides. Roller conveyor on the inlet side, dimensions (LxWxH) 4000x1000x500 mm Roller conveyor on the outlet side, dimensions (LxWxH) 3000x1000x500 mm Weight 2000 kg Chip conveyor

Condition: excellent (used), Catalogue number: 7791 TECHNICAL SPECIFICATIONS - max diameter of main blade with scorer: 350mm - max cutting height: 105mm - main blade adjustable up/down + tilt - spindle diameter: 30mm - spindle lock - with sliding table - cutting length on the sliding table: 1430mm - cutting width at rip fence: 1000mm - with side table - with scorer - max scorer diameter: 80mm - scorer spindle diameter: 20mm - main motor: 5.5kW - extraction port diameter: 100mm - table dimension: 115x625mm Hjdpfx Asxpvk Ish Nong - table size with extension and widening: 2150x1105mm - blade guard - 3 blade speeds: 3200/4500/6000rpm - dimensions (L/W/H): 2300x3350x1520mm - weight: 746kg Net price: 11,900 PLN Net price: 2,830 EUR (based on exchange rate 4.2 EUR) (Prices may vary due to significant exchange rate fluctuations)

Condition: new, functionality: fully functional, TECHNICAL DATA: - Maximum horizontal cutting length: 2500 mm - Maximum vertical cutting length: 2200 mm - Maximum vertical cutting height: 1600 mm - Maximum horizontal cutting height: 1400 mm - Maximum cutting thickness: 60 mm - Motor power: 5 HP (3.7 kW) - Blade diameter: 250 mm Hnodpfxjx S Egaj Ah Nsg - Blade speed: 5300 rpm

Condition: used, Year of construction: 2009, functionality: fully functional, cutting length (max.): 3,800 mm, cutting height with scoring (max.): 80 mm, saw blade diameter: 380 mm, cutting height (max.): 100 mm, main saw diameter: 380 mm, input voltage: 380 V, GIBEN SMART panel saw with front loading, cutting capacity 3800 mm, in working condition. Hsdpex U Emrsfx Ah Nong

Condition: excellent (used), Year of construction: 1997, still a very nice panel saw 2 m sliding table 7.35 kW motor Location: Freiburg area Hjdpfeyagpqox Ah Nong

Condition: used, Year of construction: 1992, functionality: fully functional, 1 unit Panel Saw TK UNIVER SVP 950M Operating hours: 1054h, as per pictures and inspection, self-dismantling Color: green Year of manufacture: 1992 Hjdsx Szycopfx Ah Neng Dimensions (L/W/H): 600x250x80 cm Condition: used Payment method: advance bank transfer Storage location: joinery/workshop hall 1 Shipping: Collection only – no shipping available for this item!

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm Hnsdpfx Aju Rqq Heh Nog