===autoclave can act as a wood dryer====
Diameter 2.000 mm
Length 11.800 mm
Volume: 33.500 L
Pressure: 0 to 1.2 Mpa , 0-12 Bar
The autoclave is included:
- warmed tank D=2m x 11.8 m
- vacuum pump
- pressure pump
- gasket pump
- cooling pump
- mixer pump
- platform trolley
The autoclave has an automatic controller.
It is possible to replace the control panel with a new type.
the machine is under the power
10 x Autoclave / Hardening boiler
Manufacturer: Scholz & Co.
Year of construction: 1992-1996
Working pressure: 16 bar
Working temperature: 203° C
Volume: 85,500 liters
Diameter: 2,200 mm
Cylindrical length: 21,900 mm
Total length: ca. 24.000 mm
Charging medium: saturated steam
Quantity: 10 units (all identical)
The autoclaves have a Scholz quick-closing door and are in very good condition!
vacuum pressure impregnation vessel IWT
year of constr. 2001, used
Plant still connected
for complete impregnation, the wood is completely saturated
Treatment of wooden packages or wooden blocks in stainless steel pallets
Impregnation kettle made of stainless steel, insulated with glass wool
Volume 9120 liters
Internal length 4000 mm, internal diameter 1600 mm
Package size approximately: 1.00 mx 1.00 mx 4.00 m
External length approx. 6000 mm, external diameter approx. 2000 mm
Timber Impregnation vessel
Type: sawmill impregnating
Basin inner dimensions:
Width: 1.510 mm
Length: 14.000 mm
Height: 1.540 mm
Double walled container
ready for your test
without fluid inside
Location: Southern Germany
Dimensions: 15.000 x 2.500 mm
Availability: on demand
Terms of delivery: ex works
Terms of payment: 100% before dismantling/load...
Impregnation tunnel Range und Heine
spray application system Flowcoroll
for impregnation of wooden window parts, scantlings, boards, strips,
also profiled parts
working width 200 mm
working heigth max. 120 mm
machine length approx. 2 m
drive speed approx. 2-8m/min.
coating of the wooden parts with impregnation fluid by low pressure flood nozzles with water based fluid in a flood process
Second-hand dipping plant, product Wichmann Typ WS 14,0Ha
Dipping basin: about 14.00 m long, 1.40 wide, 1.50 high (inner dimensions),
year of manufacture 1995,
Controller with Moeller PLC unit.
Wood rest: about 6.00 m long with 6 forks,
Holding-down clamp: about 6.0 m long, with 6 forks,
Without Collecting basin, but inner basin is double-walled.
Basin inside in good condition.
Total weight of approx. 12,0 tons,
Transport-measure: about 14.60 m long, 2.40 m wide,
3.15 m high, but with...
length approx. 12 m
height approx. 1,50 m
width approx. 1,50 m (outside 1,70 m)
height of the hydraulic lift approx. 3,10 m
There is a small hole in the wall
which can be easy repaired by welding or
a metal panel.
Second-hand dipping plant, product MEBA Type TBM 12.5St
Dipping basin: 12.50 m long, 1.22 wide, 1.25 high (inner dimensions),
year of manufacture 1987,
Wood rest: frame 7.0 m,
Holding-down clamp: 5 folks 6.0 m, hydraulically working,
drain pan: 13.10 m long; 2.06 wide; 1.02 high (outer dimensions),
total weight of approx. 9.0 tons,
Transport-measure: 13.10 m long, 2.67 m high, 2.06 m wide,
The dipping basin and the drain pan form one unit.
Basin inside in good condition,
Basin is empty...
Second-hand dipping plant, product MEBA Typ TBS 12,5
Dipping basin: 12.50 m long, 1.35 wide, 1.50 high (inner dimensions),
year of manufacture 1994,
Automatic microprocessor control unit including 16 programmes to select the operating
cycle and operating time and integrated overflow protection.
Wood rest: 8.00 m long, 8.0 tons carrying capacity,
Holding-down clamp: 7.00 m long,
Collecting basin: 13.26 m long; 2.40 wide; 1.05 high (outer dimensions),
The dipping basin and the drain pan form...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.
Try our app for used machines now!
Machineseeker app for iPhone and Android.
All information, offers and prices on this website are subject to change and non-binding!
Designated trademarks belong to their respective holders.
Machineseeker Group GmbH Does not assume liability for the content of linked external websites.