Used Burkle for sale (48)

Condition: good (used), Paint casting machine, paint casting station -Paint casting machine Manufacturer: Bürkle -Max. pouring width: 1290 mm -Adjustable pouring gap: via handwheel with indicator -hydraulically: height adjustable -without: paint pump Itedsc R Iyaopfx Abnok -Dimensions: 2100/800/H1450 mm -Weight: 386 kg

Condition: used, Year of construction: 2001, Thermo-lamination system Manufacturer: BÜRKLE Type: FFAII 1300 Year of manufacture: 2001 Technical data: Working width: 1300 mm Panel dimensions Width: 200 - 1300 mm Length: 400 - 3000 mm Thickness: 8 - 40 +/- 0.2 mm Film dimensions Width max. 1320 mm (lateral overhang up to 20 mm) Iodpszuzt Sofx Abnstk Roll diameter 76 or 152 mm (3" or 6") Working height above floor: 940 mm System speed: 15 - 45 m/min Three-phase drive with vector control Operating side: right Panel feed: centered System configuration FFAII 1300 - Brush machine DBM (chain brushes) - Preheating and smoothing calender GKL, D = 500 mm - Thermo-oiler heater 36 kW - Hardener application machine DAH + complete hardener circulation system with monitoring - Transport section + IR zones with temperature sensors - Adhesive application machine DAK + automatic level sensing - Cooling unit for DOW cooling - Adhesive supply - Conical transport section TKE - Lamination calender EKM, D = 500 mm + film unwinding station + separating station + belt transport section with operator platform for FVE - Expansion shafts - Smoothing calender GKL, D = 500 mm at the inlet of the conveyor belt - Thermo-oiler heater 96 kW for lamination calender and smoothing calender - Central control cabinet - I.S.E. Optimat ISL 111 (year of manufacture 2004) Note: The technical data and descriptions are a transcript of the order confirmation at the time. The data is for informational purposes only and is not binding.

Condition: used, Year of construction: 1990, Paint/coating application system Manufacturer: Bürkle Type: DAL 1 1300 Year of manufacture: 1990 Itodpfxjzuzqdo Abnsk Note: The technical data and descriptions are transcriptions from the original order confirmation. The data is for informational purposes only and is not binding.

Condition: used, Door panel postforming line Note: The line began series production in 2022; at this point, all machines were technically synchronized and, if necessary, overhauled. Door panel postforming line consisting of: Portal loading system Manufacturer: Kraft Year of manufacture: 2019 Technical data - with vacuum lifter - 2 infeed roller conveyors - one transport roller conveyor for further transport Wide belt sanding machine Manufacturer: Costa Type: KK7 CT CT 1350 Year of manufacture: 2018 consisting of: Wide belt sanding machine, sanding from below Technical data - contact roller - electronic shoe sanding unit - cleaning brush - intermediate transport belt, length approx. 3000 mm Wide belt sanding machine, sanding from above Technical data - identical equipment Complete formatting, laminating and postforming line consisting of: Roller conveyor system Manufacturer: Kraft Year of manufacture: 2019 Technical data - 3 individual elements - centering station Double end profiler Manufacturer: IMA Type: FBA/II/740/A Year of manufacture: 2018 Technical data - equipped with infeed conveyor and aligning station - saw unit below - trimming unit - edge trimming unit - prism milling cutter - joint milling cutter - cross edge milling unit - 3 profile milling units - brushes Laminating line Iedozuziyepfx Abnotk consisting of: Infeed conveyor Manufacturer: Kraft Year of manufacture: 2019 Glue application machine Manufacturer: Bürkle Type: DAK1300 Year of manufacture: 1992 Technical data - mechanically overhauled in 2018 - control system completely overhauled in 2022 - with infeed table, manufacturer Kraft - steel platform with stairs and various pumps - glue melting unit GWK Eco 03A Infeed table for laminating line Manufacturer: Kraft Year of manufacture: 2019 Laminating line Manufacturer: Bürkle Type: EKMH 1300 Year of manufacture: 1998 Technical data - new Siemens Simatic KMG Touch control system - Bürkle GLK press calender - incl. film holder and saw for overhang - working width 1300 mm - 2 temperature control units GWK - column swivel crane for loading paper rolls - extraction conveyor Postforming line Manufacturer: Homag Technical data - infeed table - with 2 saw units, horizontal and vertical - intermediate buffer with 4 levels - infeed to the postforming machine - 2 identically constructed processing sides with glue application - PU pre-melting unit Nordson / VersaBlue, year 2020 and 2004 - pressure zone with revolving magazine for various profiles - various milling units and flap brushes - 2 cooling units BEKO Bekoblizz LC, year 2020 Belt conveyor with inspection system - swivel arm with vacuum suction cup - inspection station for optical inspection of the workpiece Portal destacking system Manufacturer: Kraft Technical data - with vacuum portal and 3 destacking stations Note: The technical data and descriptions are copies of the original order confirmation. The information provided is for informational purposes only and is non-binding.

Condition: used, Paint line Paint line consisting of: Vacuum loading system Technical data - 2-strand - Roller width: approx. 1000 mm Wide belt sanding machine Manufacturer: Büftering Type: Classic 213EB Year of manufacture: 2000 Technical data - Working width: max. 1350 mm - Vacuum conveyor belt - Electronic sanding pad Belt conveyor system Manufacturer: Belting Year of manufacture: 2019 Technical data - Dimensions: 6100 x 1000 mm Dust extraction system Manufacturer: Heesemann Type: EA2 Year of manufacture: 1990 Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 Throughfeed drying tunnel Manufacturer: Bürkle Technical data - with UV lamp Paint application machine Manufacturer: Bürkle Type: DAL1-1300 Year of manufacture: 1993 UV drying tunnel Manufacturer: Elmag Type: Ti166-35+2iVM1-65 Technical data - equipped with 2 UV lamps Wide belt sanding machine Manufacturer: Büftering Type: Optimat SCO 313QHQ Year of manufacture: 2007 Technical data - Working width: approx. 1350 mm - Machine equipped with 3 sanding units (cross-longitudinal-cross) 4-tier intermediate buffer Technical data - Tier size: 3000 x 1350 mm Dust extraction system Manufacturer: Cefla Type: TN3500/TT Year of manufacture: 2004 Paint robot Manufacturer: Cefla Type: Spraybotic MD Year of manufacture: 2004 Technical data - Throughput width: approx. 1350 mm - Automatic spray arm with 4 spray nozzles - Pump station with 5 Graco paint pumps Intermediate transport Manufacturer: Cefla Type: TN3591/TT Year of manufacture: 2004 Throughfeed multi-level dryer Manufacturer: Cefla Type: VN 2000/3/7500/300-24 Year of manufacture: 2004 UV drying tunnel Manufacturer: Venjakob Year of manufacture: 2008 Technical data - Infeed conveyor belt - 4 UV drying lamps (1 below, 3 above) - mounted on 2 belt conveyors Venjakob Belt conveyor Manufacturer: Cefla Type: TN3500/E Year of manufacture: 2004 Technical data - Conveyor length approx. 3500 mm Belt conveyor Manufacturer: Cefla Type: TT/1V/3750 Year of manufacture: 2004 Technical data - Conveyor length approx. 3750 mm Roller conveyor Technical data - Roller width: 1700 mm - Conveyor length: 3750 mm Edge sanding and brushing machine Technical data - with alignment table - 3 sanding units for cross and longitudinal processing of door leaf edges Itsdjzuzhispfx Abnek Belt conveyor Manufacturer: Belting Technical data - Conveyor length: approx. 4000 mm - Belt width: approx. 1170 mm Turning system for door leaves Manufacturer: Kraft Year of manufacture: 2018 Individual components of the system can be purchased separately as follows: Vacuum loading system €10,000.00 Büftering Classic 213EB wide belt sanding machine €12,000.00 Belting belt conveyor €3,500.00 Heesemann EA2 dust extraction system €2,500.00 Bürkle DAL1-1300 paint application machine No. 1 €7,500.00 Bürkle throughfeed drying tunnel €9,000.00 Bürkle DAL1-1300 paint application machine No. 2 €7,500.00 Elmag UV drying tunnel €13,000.00 Büftering Optimat SCO 313QHQ €15,000.00 4-tier intermediate buffer €10,000.00 Cefla TN3500/TT dust extractor €4,000.00 Cefla Spraybotic MD incl. pump station €50,000.00 Cefla TN3591/TT intermediate transport €4,000.00 Cefla VN 2000/3/7500/300-24 multi-level dryer €20,000.00 Venjakob UV drying tunnel €13,000.00 Cefla conveyor belt TN3500/E €2,500.00 Cefla conveyor belt TT/1V/3750 €2,500.00 Roller conveyor €2,000.00 Edge sanding and brushing machine €5,500.00 Belting conveyor belt €2,000.00 Kraft turning system for door leaves (2018) €20,000.00 Note: T

Condition: used, Year of construction: 2001, - RBO vacuum feeder – Tornado SC 1300 - HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) - HEESEMANN – Dust removal machine - Plus additional dust removal - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - BÜRKLE SLC 1400 – Roller coating machine - Spreading brush machine with air nozzles from above - HACKEMACK slit nozzle dryer - RBO – Vacuum stacker Oil application line Year of construction: 2001 Oil application line consisting of: RBO vacuum feeder – Tornado SC 1300 HEESEMANN MFA 8 (transverse-longitudinal-longitudinal brushes) HEESEMANN – Dust removal machine Plus additional dust removal BÜRKLE SLC 1400 – Roller coating machine Itedpfx Abjzuzg Esnek Spreading brush machine with air nozzles from above BÜRKLE SLC 1400 – Roller coating machine Spreading brush machine with air nozzles from above HACKEMACK slit nozzle dryer RBO – Vacuum stacker with new Siemens control system in 2024 Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Year of construction: 2007, functionality: fully functional, working width: 1,400 mm, roller diameter: 240 mm, passage height: 80 mm, height adjustment type: electric, working height: 870 mm, roll width: 1,500 mm, workpiece height (max.): 80 mm, Bürkle DAK 1400 adhesive application machine, from the first owner, in well-maintained condition: – Machine for single- and double-sided adhesive application – Adhesive application on the top and bottom (4-roller machine) – Robust industrial design – Direct drive of the application rollers – Separate direct drive of the metering rollers – Metering gap adjustment with mechanical digital display – Height adjustment with mechanical digital display – Roller parallelism adjustable via sliding coupling – Infeed with 3 driven rollers for part length min. 350 mm – Outfeed with 3 driven blade disks for part length min. 350 mm – Frequency-controlled drive 6-30 m/min – Motorized height adjustment via push buttons – Working width max. 1400 mm – Clearance height up to 80 mm – Working height above floor approx. 870 mm – 2 application rollers Ø 240 mm – Grooving 20 pitches per inch – 2 metering rollers Ø 190 mm – Roller width 1516 mm – Drive power 3 kW Isdpfx Ajzuv Dfsbnotk – Operating side Right – Paint finish RAL 7035 light gray – Year of manufacture 2007, first owner, well-maintained condition – Sale from location Karlsruhe / Southern Germany – Inspection and trial operation possible by arrangement

Condition: used, Belt length: 7330 mm x 150 mm, handwheel adjustment Storage location: Nattheim Ijdozkl Ufspfx Abnetk

Year of construction: 2016, condition: ready for operation (used), A Bürkle roller coater including Bürkle LZU 800 outfeed table is available. Working width: 700mm, max. mechanical feed speed: 120m/min, nominal feed speed: 25m/min, max. workpiece height: 80mm, working height range: 880mm-920mm, outfeed table length: 4000mm, operating hours: approx. 1233h. Accessories: two original Bürkle spare rollers (sealed). Documentation available. On-site inspection possible. Itedpfx Asxtfgyebnek

Year of construction: 1993, condition: ready for operation (used), A complete paint shop is available. 1) Sergiani S.p.A. Monomatic S, year of construction: 2001. 2) Finnrose FLT 6, year of construction: 1993. 3,4,5) Three identical Bürkle DAL1-1300 presses, year of construction: 1993. 6) Karl Heesemann FGA 6 EX, year of construction: 1993. 7) Finnrose FLT-4.5, year of construction: 1993. 8) Bürkle DAL2-1300, year of construction: 1985. Hackemack KTR 2040, year of construction: 1996. All machines are part of a paint shop. On-site inspection is possible. Iodpfx Abjtpp H Esnstk

Condition: excellent (used), Shelf dimensions: 130 cm width, 255 cm length. Itedpfjzimiuex Abnjk

Condition: excellent (used), CATALOGUE NUMBER 7554 Technical specifications: Ijdpfozc Nmwox Abnotk - Roller width: 1350 mm - Max. pass-through height: 70 mm - Glue application: single- or double-sided - 2-roller system - Diameter of glue application rollers (top/bottom): 160 mm - Main motor: 0.75 kW - Dimensions (L/W/H): 2000x750x1550 mm - Weight: approx. 534 kg ADVANTAGES – German manufacture – Used glue applicator – In very good condition Net price: 13,900 PLN Net price: 3,300 EUR (based on an exchange rate of 4.2 EUR) (Prices may vary with significant fluctuations)

Condition: excellent (used), Year of construction: 1989, Veneer press Manufacturer: Bürkle Type: U60 Year of manufacture: 1989 Plate dimensions: 2,200 x 1,250 mm Opening width: 400 mm Pressing pressure: 60 tons Specific pressing pressure: 2.2 kg/cm² Heating: Electric Itodpoztnhmjfx Abnok Motor power: 0.75 kW Emergency stop device: Emergency stop cable Weight: 3,000 kg Dimensions: 2,750 x 1,380 x 1,785 mm

Condition: excellent (used), Year of construction: 2010, I sell the 1-head 1-lamp UV-drying tunnel Burkle TRUV 1300 Year 2010 Working width 1300mm. Itedpfx Absvxa T Asnjk Total length 2,00m Total power 18,7kW 1 Lamp GA 120 W Very good condition, available immediately.

Condition: good (used), Year of construction: 2000, type of input current: three-phase, pressing force: 500 t, total length: 4,000 mm, total width: 4,000 mm, total height: 3,200 mm, overall weight: 43,000 kg, temperature: 160 °C, continuous press with mylar belt dimensions: 2700 x 3200 mm Iodpfx Asycxvusbnstk

Condition: good (used), Year of construction: 1997, functionality: fully functional, Bürkle Multifoiler, membrane press Model BTF 1628/60 Year of manufacture: 1997 Line for laminating smooth and shaped MDF parts with thermoplastic films from roll or sheet, suitable for PVC, PP, high-gloss PVC, ABS films. Suitable for thermoforming and membrane process. Max. part size: 1250 x 2550 mm Part thickness: 6-35 mm Itsdpfx Ajznb Uisbnok Heating plate dimensions: 1600 x 2800 mm Max. heating temperature: 140°C Stroke: 230 mm Siemens control system Total connected load: 38 kW With 2 aluminium tables and reserve table Weight: 16.5 t Press length: 2,550 mm Press width: 1,250 mm Max. workpiece thickness: 35 mm With pin table

Condition: excellent (used), Year of construction: 2014, Roller coater BÜRKLE easy coater RCL 12M and UV system easy cure UV - TRUV with 2 lamps and 2 x roller conveyor BÜRKLE easy coater RCL 1300: For one-sided application on flat surfaces from above Operating side left Touch screen control TP 177 Micro Rubberized application roller Hard chrome-plated metering roller can be sensitively adjusted via worm gearbox Controlled belt transport with exposed counter roller for safe workpiece transport Iodpfx Abjt Dx U Sjnstk Quick-change system with split bearing and cross-disc coupling for easy changing of the application roller Oscillating squeegee, can be changed quickly for cleaning Separate, infinitely variable FU direct drives for application roller, metering roller and transport Reversible dosing roller Motors and limit switches in Ex version on the machine Non-Ex control cabinet and control panel outside the danger zone on the machine Mobile version Electrical preparation for integrating the roller coating machine into a coating line Technical data Working width: 1300 mm Workpiece height 3 - 80 mm Min. workpiece length 400 mm Rubberized application roller DM 240 mm Chrome-plated metering roller DM 172 mm Transport speed 2 - 15 m/min variable Connected load approx. 2.4 kW Speed of metering roller 1.0 - 3.0 m/min Working height 900 mm (+/- 20) Safety equipment according to CE Incl. switch cabinet Weight approx. 1650 kg UV system e.a.s.y. cure UV - TRUV with 2 lamps One-sided curing of UV-curing lacquers on flat workpieces from above Incl. control cabinet Working width max 1300 mm Workpiece height max 80 mm Number of lamps 2 # - changed 10/2023 UV lamp power 120 W/cm² each Speed 2 - 15 m/min variable Transport: Transport carpet Exhaust air connection 2 x 250 mm Connected load 39 kW Weight approx. 750 kg 2 x roller conveyor RB 1300 Working width 1300 mm length 4000 mm Speed 2 - 15 m/min variable Connected load 2 x 0.37 kW Total system length 12450 mm

Condition: used, Belt sanding machine BÜRKLE BSU 2500/800 - used - Sanding belt cover, Extraction fan ----- Technical data ----- Table size: 2,500 x 800 mm, Motor: 5.5 kW, Sanding belt dimensions (LxW): 7,200 mm Iodpfx Absxlt Ebenjtk

Condition: used, Year of construction: 2008, machine/vehicle number: 0117580020, Printing machine for non-synchronized printing of wood grains or other designs from above on flat workpieces in one-colour printing, suitable for aqueous and UV printing inks. - Type: SLDR 1300 - Year of manufacture: 2008 - Operating side: right - Workpiece width: 1.250mm - Min. workpiece length: 350mm (300mm) Itjdjwhp Dzopfx Abnjk - Workpiece height: ~ 3-100mm - Suitable for printing ink, water-soluble and UV printing inks Transport system: - Conveyor belt width: 1,230mm - Max. Production speed: 10m/min. - Feed speed: 8-25m/min. - Rubber coating 60Shore (6By1) - Diameter 186mm Application unit: - Rubber coating 50Shore (5by1) - Diameter: 238mm - Engraving cylinder, diameter: 174mm - Separate, infinitely variable FU direct drive for engraving cylinder and application roller. Engraving roller: - Diameter - circumferential speed Machine dimensions: - Installation length: 800mm - Working height approx. 900mm +-20mm - Width: ~ 2.700mm - Electrical connected load: 5kW - Weight: approx. 1.400kg - Location: in stock

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-27, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Operating side: left - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: Ijdsykuzvjpfx Abnetk - Maximum working width: 1.300 mm - Minimum workpiece length: 350 mm - Maximum workpiece weight: 250 kg - Conveyor belt width 1.270 mm - Workpiece thickness 3 - 100 mm - Machine length: 800 mm - Machine width: 3.200 mm - Application roller, rubberized, EPDM approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - Metering roller, chrome-plated, D: 174 mm - Counterpressure roller, rubberized, D: 186 mm - Conveyor speed, adjustable from approx. 8-25 m/min. - Working height ~ 900 mm + - 30 mm - Clearance height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 5.5 kW - With control cabinet - Weight approx. 1.450 kg - Location: in stock 32825 Blomberg

Condition: used, Year of construction: 2001, machine/vehicle number: 9646-11, - Manufacturer: Bürkle - Type: SLC - Year of manufacture: 2001 - Right-hand operation - For single-sided application of lacquer - Oscillating application roller squeegee Technical data: - Maximum working width: 1300 mm - Conveyor belt width: 1270 mm - Workpiece thickness 3 - 120 mm - Installation length: ~ 800 mm - Width: ~ 2,800 mm - 1 piece, rubberized application roller, approx. D: 238 mm - Application roller Shore hardness: 45 (can be changed) - 1 piece, chrome-plated metering roller, D: 174 mm - 1 piece, counterpressure roller, D: 186 mm - Transport speed, adjustable from approx. 6 - 30 m/min. - Working height ~ 900 mm - Passage height approx. 3 - 80 mm - Compressed air 6 bar, G1/4 inch, approx. 50 NL/min. Ijdpfx Asyifwisbnstk - Operating voltage 400 V, 50 Hz, 3 phases - Total connected load approx. 2 kW - With control cabinet - Weight approx. 1,400 kg - Location: in warehouse 32825 Blomberg

Condition: used, Year of construction: 1978, used good condition cleaned functionality tested Itedszkl Ifepfx Abnek Manufacturer: Bürkle Type: U 88 Year of manufacture: 1978 Machine no.: 3102629 Safety tested (GS certified) Touch control Safety cable on top Electric heating Specific maximum pressing force: 80 t Aluminum plates glued Lower piston Quantity: 6 Plate size approx. mm: 2550 x 1300 Opening width approx. mm: 400 Piston diameter: 70 Space requirement approx. L x W x H approx. mm: 3100 x 1500 x 1900 Weight approx. kg: 4000 Storage location: 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without warranty and guarantee

Condition: used, Year of construction: 2001, - Producer Bürkle - Type CASC 1400 - Year of construction 2001 - Working width 1350 mm - Working height 900 + - 20 mm - Part height ~ 5 - 100 mm - Operating side, right - Roller for putty EPDM, 240 mm - Qick changes system for roller - Metering roller 198 mm - Smoothing roller hard chromed 240 mm - Belt transport system - Length ~ 1.450 mm - Width ~ 2980 mm - Mobile, with flange of wheel Iedpfxjzf N Ewe Abnstk - Feed speed 5 - 25 m/min - With switch cabinet - Voltage / HZ 400 / 50 - Location, on stock - Commodity code 84242000 - Voltage fluctuation max. +/- 5 %

Condition: ready for operation (used), machine/vehicle number: 5981, Working height: 870 mm Working width: 1300 mm Itjdpfx Asyah Uzjbnok Conveyor belt width: 1270 mm Conveyor speed: 6 - 30 m/min, continuously adjustable Clearance height: 3 mm - 80 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By1 1 chrome-plated metering roller, 174 mm diameter Electrical equipment: Operating voltage 400 V, 50 Hz 3 phases Total connected load: 1.9 kW Motors and switching devices in explosion-proof design Additional equipment: Individual drive for the metering roller, continuously adjustable, with oscillating metering roller squeegee Operating side: left Machine length: 1000 mm Weight: 1000 kg

Condition: good (used), Working height 870 mm Working width 1300 mm Transport speed 6 - 30 m/min, infinitely adjustable Clearance height 3 mm - 90 mm 1 rubber-coated application roller, 238 mm diameter, rubber coating 5 By 1; application roller width: 1416 mm 1 chrome-plated metering roller, 174 mm diameter Metering roller width: 1416 mm Itedpfx Aboyah Twensk 1 rubber-coated counter roller, 190 mm diameter Counter roller width: 1300 mm Electrical equipment Operating voltage 400 V, 50 Hz Total connected load 1.87 kW Motors and switching devices in explosion-proof design, wired to a terminal box on the machine. Control system, non-explosion-proof, in a separate control cabinet for installation outside the hazardous area of the machine. Additional equipment: Separate drive for the metering roller, 2-7 m/min, without a squeegee for synchronous operation of the metering roller. Operating side: left Machine length 975 mm Weight 1000 kg