Year of construction: 1992, Condition: used, machine/vehicle number: 530, The STEINER hydraulic press was manufactured and developed with practical aspects in mind. The hydraulic device is located on the hydraulic tank behind the press. Control blocks and valves are easily accessible from the outside and can be quickly replaced if necessary. The hydraulic radial piston pump is located on the drive console and is connected to the motor and pump mount via a coupling. The press stand is indestructible and torsion-resistant Sthal welded construction. The ironing board is screwed to the stand. The hydraulic cylinders are screwed to the press stand from above and guided through the mounting holes in the appropriate direction. The piston is connected to the piston rods via a wear ring. Four-sided, diagonal, flat grooves on the stand allow for very precise movement. Hydraulic cylinders are made of high quality material and are designed for high pressures. The piston rods are ground and hard chrome plated. The cylinder tubes are honed from the inside. Seals that have been maintained over many years are characterized by high quality and tightness. The piston rods are guided by guide bands, which are characterized by very low abrasion and a long service life. The control, control and monitoring devices for all control devices are installed in the control unit. Mutual locks ensure that no two program processes can run at the same time. The electrical control is located in a closed control cabinet. Pressing force - 8000 kN Operating pressure - 285 bar Installation height - 850 mm Stroke - 250 mm Table surface - 1550 x 1450 mm Ram surface - 1550 x 1450 mm Stand passage - 1800 mm Lateral Breakthrough in the stand on the right and left Width x height - 1300 x 1075 mm Table top thickness - 155 mm Width of the machine approx. - 3100 mm Depth approx. - 4300 mm Height approx. - 4660 mm Table height above hallway - 500 mm Table height under hallway - 755 mm Drive power - 55 kW Oil requirement approx. - 1400 liters Total weight approx. - 60 tons Fpjbu Ujpgktcogcpjg

Condition: used, Year of construction: 1983, Functionality: unexamined, machine/vehicle number: 02.056.00, overall weight: 11,000 kg, space requirement length: 2,420 mm, space requirement width: 2,040 mm, space requirement height: 3,220 mm, TECHNICAL DATA: - Pressing force (infinitely variable): 1000 kN - Max.ejector force: 30 kN - Retraction force: 300 kN - Pressing speed: 8 mm/sec. - Rapid traverse: 48 mm/sec. - Opening speed: 44 mm/sec. - Retraction speed: 23 mm/sec. - Press travel (stroke): 600 mm - Spray nozzle stroke: 70mm - Max.spray volume: 5 dm3 Fpsboupy Abju Ugcpjg - Surface Ram top: 1000 x 1200 mm - Surface Ram below: 998 x 1280 mm - Distance between columns: 1130 mm - Plane parallelism between upper and lower plate: +/- 0.1 to 600mm lenght with uniform load distribution - Maximum mould weight: 7000 kg - Load capacity of swivel plate: 3500 kg - Power connected load: 30 kW - Motor power: 7.5 kW - Sprays pressure max-min.: 4 - 10 bar - Max.flow pressure: 190 bar - Return pressure: 190 bar - Air comsumption injection: 20 - 50 Ndm3 - Tank: 140 l

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 160/0/31/99, ram adjustment: 110 mm, table width: 1,250 mm, table length: 750 mm, stroke adjustment: 200 mm, overall weight: 13,800 kg, pressing force: 160 t, ram bore: 60 mm, warranty duration: 3 months, year of last overhaul: 2023, Equipment: documentation/manual, Procent Pressix eccentric press from 1999 after full modernization in 2023. Scope of renovation and modernization work: - Full disassembly of the machine - Overhaul of all components - New clutch-brake assembly - Regeneration of slider guides - Reconditioning of the eccentric cam pan - Reconditioning of the main motor - Regeneration of balance cylinders - Replacement of eccentric shaft bearings - Replacement of drive shaft bearings Fpobu Ugsrwxkaecpsg - New progressive lubrication system - Regeneration of the pneumatic system - Cleaning, painting

Condition: reconditioned (used), Year of construction: 1983, Functionality: fully functional, Specification: Rated pressure 50 tons Slide stroke 7-80 mm Speed 75-300 strokes/min Slide adjustment 50 mm Table dimensions 500 x 500 mm Passage between columns 400 mm Weight 8500 kg Press equipped with mechanical jaw feeder - ELMEA PM132 - Year of production of the feeder: 2004. - For high speed and precision (0.02 mm) operation. - Speed up to 1000 strokes/minute for short feeds. - Acquires motion from the press shaft by driving a gear wheel with alignment joints. Rotary motion is converted to straight-alternative motion by a crank/crank system. - Adjustment of the feed length is achieved by an accurate step screw. - The clamp opening can be adjusted to accommodate belt thickness. It can also be set up for remote control operation. - It has an emergency stop sensor for hooking into the tool and is equipped with a kinetic joint that reduces the feeding angle from 180 to 120 or 90 degrees, increasing speed during feeding. The press has been professionally refurbished by Service BTC Maszyny Stolarczyk Febu Ugcetq Hqaspjpg - New touchscreen control panel and PILZ safety controller - New lubrication pump and hydraulic fuse - Warranty 6 months. - Location of the machine: 97-410 ZŁOBNICA, POLAND. - Ready for delivery.

Condition: excellent (used), Year of construction: 1995, Functionality: fully functional, - BAKER 200 T-type box press - manufacturer Germany - pressing force 200 T - year 1995 Fpsbsrnkdrsu Ugcpeg - for straightening steel parts in two planes - infinitely adjustable clamping force from the control panel - smooth adjustment of the approach distance from the desktop - automatic operation - very good condition - complete DTR

Condition: repair required (used), Year of construction: 1981, Functionality: limited functionality, machine/vehicle number: ST-42/421-45/2390, overall weight: 35,000 kg, Hot press for forming screws. The device has been out of service for several years due to failure to meet the technical parameters of the products. Made as one of three in the application of pilot technical solutions to improve the production process. Approx. 3 years "dry" commissioning trials were carried out. The trial demonstrated problems of operation as well as functionality. Device considered without peripheral devices. Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address. Fpobu Ugcou Hf R Hspeg Machines can be viewed by appointment by phone

Condition: new, pressure 500 t column daylight 2600 mm stroke 800 mm table surface area 6000 x 3000 mm max. 800 mm adjustment of press crosshead 5200 mm slide adjustment -horizontal 1800 mm Capacity 162 l/min feed down 9 mm/sec feed up 14 mm/sec total power requirement 45 kW weight of the machine ca. 50 t Fsbu Ugsfv Awhjcpjpg - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC

Year of construction: 1990, Condition: reconditioned (used), Hydraulic press - has 4 independent stroke / cylinders. Deep drawing process. Manufacturing of oil and fuel filters cans. The range of details is: Sheet thickness: 0.4-0.6 mm Material type - black or galvanized steel Fsbu Ugcegcvfnjpjpg Can diameter: 68mm - 96mm Can length: 50mm - 180mm The entire control was replaced, including cabling, drivers, monitor, etc.

Condition: good (used), We offer Becker scrap metal packer, ready to work. Dimensions of the packet 40cm/40cm. Supply voltage; 3F˜380 V 50Hz Connection power; 75 kW motor Work cycle; 48 seconds Capacity; 8-10 tons/h Feed chamber 130cm x 200cm x 76cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, - remote control for remote operation in automatic mode, - panel for operation in manual mode, - counter for made packages, Fpjbu Ugst Hfqfecpog .

Condition: reconditioned (used), Year of construction: 1980, Functionality: fully functional, Technical data: Force 350 ton Slide stroke (fixed) 400 mm Speed 10-25 spm Table dimensions 2700 x 1350 mm Distance table-slide 910 mm Adjustable slide 150 mm Weight ca 60 tons Voltage 400 V Working pressure 6 bar Press proffesionally overhauled by OMERA exclusive dealer: • New clutch-brake unit • New bearings in kinematic system • Replaced with new worn elements of the kinematic system (shafts, pinions, gears) • Regenerated balancing cylinders • New pneumatic system • New automatic lubrification system - progresive • New main engine bearings • New electrical cabinet equipment with wiring composed as follows: - Programable PILZ PSS4000 device - PILZ safe encoder - Fatek FBs60MCJ2 PLC - Weintek 15” touch panel - No. 10 electronic cams - No. 10 tool protection signals Fpobu Ugotq Hhzecpjg - Software backup with entry keys • Machine painted as a new • Instruction manual • Warranty 6 months • Machine localization: 97-410 ŻŁOBNICA, POLAND

Condition: good (used), Year of construction: 1991, Our Hydrap 160 ton press with decoiler (model year 1999) / straightening machine (model year 1999) / feed unit (2004) is for sale. Febu Ugotu Szljcpspg The system is only available as a complete unit. Operating hours: 20242 Condition: good condition Viewing possible and welcome. Location: Szügy / Hungary

Condition: used, Year of construction: 1965, machine/vehicle number: ST-42/420-31/659, overall weight: 35,000 kg, 3 years back the commissioning was done, the electrics are in working order, helions replaced. (The device treated without peripherals). The technical condition as of the date of inspection and after obtaining additional information was determined as satisfactory. The device requires maintenance. Fobu Uou Hf Rmegcpjpg Fabryka Elementów Złącznych S.A. located at 14 Fabryczna Street 41-100 Siemianowice Śląskie NIP: 643 000 00 23 REGON: 000028346 KRS 0000097998 has the machines specified below for sale. Deadline for submission of offers until 22.11.2024r. Offers should be sent to the e-mail address The machines can be viewed after prior appointment by phone

Year of construction: 2000, Condition: excellent (used), Force: 300 tons Windows: Yes Daylight: 1000mm Table: 1800x1000mm Ram: 1800x1000mm Stroke: 600mm Weight: 43 tons Fpjbu Ugogbvkvocpjg Height: 4700mm Siemens S7 control Floorstanding Sick lightguards Die cushion: 200mm stroke

Condition: like new (used), Year of construction: 2018, Functionality: fully functional, Pressing force 300 to Stroke 500 mm Area between the columns 1250x1000 mm Installation height 1000 mm Rapid traverse 22 mm/s Working speed 2 mm/s Motor 7.5 kW Length 2000 mm Width 1500 mm Height 3300 mm 4-column guide Fpobuovgncns Ugcpjg Round ram guide Table and ram with T-slots 2-hand operation Operating instructions Siemens touchscreen control and electric control panel NEW , 50 programs storable, for programming of: - Upstroke and downstroke rate - Pause time in the floor - Decompression time - Setting the working pressure - Piece counter - Prestop in upward and downward movement - Setting for manual and automatic movement - Management of alarms and anomalies

Condition: good (used), We offer Riko S-26 parcel machine for scrap metal after renovation, ready to work. Package dimensions 30x30 cm. Supply voltage; 3F˜380 V 50Hz Connection power; 50 kW Work cycle; 45 seconds Capacity; 5-7 tons/hour Feed chamber; 120 cm x 135 cm x 66 cm (depth) Machine equipped with: - heaters for hydraulic oil, - oil cooling system, - hydraulic oil level sensor, - hydraulic oil temperature sensor, - remote control for remote operation in automatic mode, Fobu Ugcsq H Sdkopspg - panel for operation in manual mode, - counter of made packages, - new hydraulic pumps, - new distributors, - new automation control system,

Condition: good (used), Year of construction: 1970, Functionality: fully functional, machine/vehicle number: 64511, stroke distance: 500 mm, pressing force: 100 t, Very rarely used test press for running in new tools. Machine works perfectly Pressing force: 100 tons Distance table - punch: 500 mm Fpsbu Ugsm Rgh Tjcpeg Table size 1100 x 800 mm Weight: approx. 7 tons Dimensions: 2300x1100x3000 mm (LWH) Hydraulic unit: 1200x1200x1600 mm (LWH) Free loading

Condition: good (used), Year of construction: 2023, Functionality: fully functional, die cushion stroke: 200 mm, table width: 1,000 mm, table length: 1,200 mm, pressing force: 250 t, Ejector in ram - approx. 10 t Table drawing cushion approx. 800 x 850 mm Fpobuovga H Ee Ugcpeg Weight approx. 18 tons Stroke approx. 600 mm

Condition: new, Year of construction: 2024, pressure 75 t stroke 8-80 mm Fpobu Ugcjvfxl Rspjg no. of strokes 80-200 Hub/min ram - range of adjustment 70 mm table surface area 900x600 mm ram surface 900x470 mm hole in the table 450x180 mm dist. between columns - front to rear 500x350 mm dist. between pillars (front to rear) 788 mm total power requirement 10 kW weight of the machine ca. 10 t dimensions of the machine ca. BxTxH 1600x1200x2800 mm

Condition: used, Pressing force 400 kN ,Table 450x560 ,Ram 375x300 ,Distance table-joints 340 stroke 160 ,Through-feed hole 100 diameter ,Safe column passage 220x410 Febeum Uuyeu Ugcpepg

Condition: new, Year of construction: 2024, pressure 30 t throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW Febuevfhq As Ugcpopg weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 30 t Fpobovfhqvou Ugcpog throat 180 mm stroke 8-76 mm no. of strokes 80-200 Hub/min ram - range of adjustment 60 mm table surface area 360x580 mm table height 840 mm hole in the table Ø 110 mm ram surface 250x350 mm tool hole in ram Ø 40 mm total power requirement 3 kW weight of the machine ca. 1,8 t dimensions of the machine ca. BxTxH 1350x1200x2100 mm

Condition: new, Year of construction: 2024, pressure 50 t throat 230 mm stroke 12-110 mm no. of strokes 40-100 Hub/min ram - range of adjustment 70 mm table surface area 740x440 mm table height 840 mm hole in the table Ø 140 mm ram surface 460x300 mm tool hole in ram Ø 45 mm total power requirement 4 kW weight of the machine ca. 3,4 t dimensions of the machine ca. BxTxH 1500x2500x2510 mm Fjbuovfhqps Ugcpspg

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min Fpsbuovfhqis Ugcpeg ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm 300 mm table surface area 300x450 mm table height 840 mm Fjbu Uovfhp Segcpjpg hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm

Condition: new, Year of construction: 2024, pressure 20 t throat 155 mm stroke 6-60 mm no. of strokes 84-210 Hub/min ram - range of adjustment 50 mm Febu Ugsvfhp Eecpopg 300 mm table surface area 300x450 mm table height 840 mm hole in the table Ø 90 mm ram surface 190x278 mm tool hole in ram Ø 25 mm total power requirement 1,5 kW weight of the machine ca. 1,0 t dimensions of the machine ca. BxTxH 1100x1100x1900 mm