Condition: used, Year of construction: 1970, pressure 5 t distance between columns 300 mm dayligth ? mm weight of the machine ca. - t dimensions of the machine ca. - m Handspindelpresse 5 to Fgobvdf Dot Ukyuoneb Workspace: Tischfläche 280 x 260 Control: ca. 180 mm Hub

Year of construction: 1985, Condition: used, table length 1.000 mm Fobvdshc Uzcjf Dnjgb table width 800 mm weight of the machine ca. 6 t

Condition: used, Year of construction: 1980, pressure 40 t table length 670 mm table width 570 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m Fgobvdf Dst Hxczjnjb

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Fgjbvdjuqd Nuef Dnjb Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, Year of construction: 1966, pressure 2 t distance between columns - mm stroke ? mm throat ? mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m hydraulic press 2t Fgjbst Dcylovdf Dnob Drive: 0

Condition: used, Year of construction: 1980, pressure 160 t throat 360 mm stroke 250 mm total power requirement 37 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 2300 x 1200 x 3350 mm Fgebjt Hw Tlsvdf Dnob

Condition: used, machine/vehicle number: H84 - 1331, Press capacity: 16 ton Throat depth: 250 mm Stroke: 300 mm Daylight: 600 mm Table surface area : 553 x 368 mm Fgsbvdfou Iuk Ee Dnsb Approach speed: 121 mm / sec Return speed: 450 mm / sec Working speed: 45 mm / sec Required power: 7,5 kW

Year of construction: 1992, Condition: defective spare-parts repository (used), range L-W-H ca. 2500 x 500 x 2100 mm voltage 400 V Fgebvdsttu Naef Dnsb control voltage 230 V

Year of construction: 2001, Condition: used, press capacity 148 to material Hartmetallstangen Fgebet Hw Snjvdf Dnjb quality Extrusionspressvorgang 0

Condition: used, Year of construction: 2006, machine/vehicle number: 18282, Pressure total: 140 ton Stroke: 800 mm Daylight: 1.004 mm Free frontal opening L-R: 2.060 mm Table surface area : 2.000 x 520 mm Slide area: 2.040 x 520 mm Working speed: 4 -20 mm / sec Rapid travel: 135 mm / sec Fgjbvdouqd S Ajf Dnsb Return speed: 120 mm / sec Weight of machine approx.: 14 ton Height over floor approx.: 4.810 mm Oil volume: 700 l

Condition: used, pressure 25 t table length ? mm table width ? mm total power requirement ? kW weight of the machine ca. ? t dimensions of the machine ca. ? m Fgobvdf Dstr U Rasnsb

Condition: used, Year of construction: 1977, pressure 160 t throat 360 mm stroke 560 mm total power requirement 33 kW Fsbvst Hw E Isdf Dnegb weight of the machine ca. 6000 kg dimensions of the machine ca. 2000x2400x3650 mm

Condition: used, Year of construction: 2007, machine/vehicle number: 51254-07, Press capacity: 40 ton Daylight: 550 mm Stroke: 150 mm Ram speed down: 50 mm / sec Ram speed up: 85 mm / sec Throat depth: 250 mm Table surface area: 1.400 - 4.900 x 280 mm mm Table height over floor: 900 mm Oil volume: 250 l Driving motor: 5,5 kW Dimensions L x W x H: 1.400 x 1.800 x 2.400 mm Weight of machine approx.: 2.300 kg Fobvdeuqd Rlof Dnjgb Standard configuration - Press uprights in C-frame design in rigid and low-stress welded construction with integrated straightening bed- Oil tank welded into the press upright- Oil level indicator- Filling and ventilation filter- Press cylinder made of high-quality steel with honed cylinder running surface- Hardened, ground and hard chrome-plated piston rod with anti-rotation lock- Piston with DIN 810 bore for tool attachment- Modern and maintenance-friendly block design of the hydraulic system- Safety valve to protect the hydraulic system against overload- Infinitely adjustable limitation of the downward stroke with fixed upper stroke limitation- Infinitely variable adjustment of the ram return stroke (return stroke limiter)- Directional stroke control for preselection and exact reproducibility of stroke depths- Sensitive and targeted adjustment of the straightening stroke depth over the entire stroke, even at full press force- Ergonomically designed hand lever with rotary handle as central operating element for ram movement, straightening stroke setting and straightening stroke adjustment- Numerical stroke depth display for controlled setting, repetition and adjustment of the straightening stroke depth Extended machine accessories - Total press bed extension: 3,500 mm- Extension right: 1 x 500 mm and 1 x 1,250 mm- Extension left: 1 x 500 mm and 1 x 1,250 mm- Number of supports: 2 each on the right and left- Workpiece holders for centers- Rotating center punch tips MK3- Pneumatic clamping of the right quill, actuation by manual valve- Spring package for workpiece holders, 2 each for load capacity up to 20 kg and 100 kg- Straightening hammer- Pressure pieces for straightening hammer- Straightening anvils, attached to the straightening carriage- Alignment anvils, can be moved to the rear while traveling- Supports for straightening anvil

Condition: used, Year of construction: 1965, pressure 25 t throat ? mm stroke 112 mm total power requirement 2,2 kW Fobjtqp Ifsvdf Dnogb weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3*1*2 m Slide adjustment 56 mm Largest distance between table and ram: 400 mm Adjustable table approx. 200 mm Safety screen Foot switch ram stroke 6-60 mm

Condition: used, Year of construction: 1990, pressure 25 t throat 250 mm stroke 100 mm total power requirement 7,5 kW weight of the machine ca. 3200 kg dimensions of the machine ca. 1000 x 1700 x 2600 m Fjbjt Hw Ezsvdf Dnogb

Condition: used, Year of construction: 2001, machine/vehicle number: Z 293 - 040, Capacity: 400 ton Stroke: 600 mm Daylight: 900 mm Table surface area : 2000 x 1500 mm Slide area: 2000 x 1500 mm Working speed: 0 - 10 mm / sec Return speed: 20 mm / sec Oil volume: 350 l Height over floor approx.: 3900 mm Dimensions L x W x H: 2650 x 1600 x 3900 mm Required power: 45 kW Weight of machine approx.: 32 ton Febvdouqd I Rsf Dnegb Standard configuration The press has a sideways extending table plate.

Condition: used, Year of construction: 1974, pressure 40 t table length 1280 mm table width 900 mm total power requirement 7 kW weight of the machine ca. 8 t dimensions of the machine ca. 3 x 2 x 3,6 m m No. 5282 Spotting press 400 kN REIS TUS 90 OK 40 Working area: table 900 x 1280 Column passage 930 x 705 mm Table top 900 x 1280 mm ram plate 900 x 1200 mm Installation height 1035 mm Fgjbsunufbsvdf Dnsb Space requirement approx. 3 x 2 x 3.6 m Transport dimensions approx. 4 loading meters, width 2.20 / height 2.80 Weight approx. 8 tons

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm distance between columns 420 mm total power requirement 18 kW Fgebvot Hw Dwsdf Dnob weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 1990, pressure 3 t throat 0 mm stroke 200 mm Fsbvdjt Hw Amef Dnsgb total power requirement 15 kW weight of the machine ca. 4 t dimensions of the machine ca. m Fully Automatically Straightening Press, 3 Stations,parts turning, (bolts)

Condition: used, Year of construction: 1978, pressure 160 t no. of strokes 40 - 120 Hub/min sheet width mm total power requirement 40 kW Pressing capacity 160 ton Table clamping area 1,100 x 1,280 mm Fgjbjt Hwz Novdf Dnob Ram clamping area 850 x 890 mm Distance between guides 1,120 mm Distance between columns (below guide ways) 1,350 mm Distance between Table and ram in upper position approx. 400 mm No. of strokes 40 - 120 /min Adjustment of stoke 67 / 115 / 160 mm Ram adjustment, motor driven 125 mm Ejector travel 50 mm Total electrical load, approx. 40 kW - 500 V - 50 Hz Weight, approx. 24,000 kg Accessories / Special Features * WEINGARTEN Sheet Metal Uncoiler with overhead loop control (space saving because it does not need a loop-pit). Strip width 375 mm. The loop control guides the strip-material from the uncoiler to the machine thru a straightening device with automatic supervision. * 8-track slide bearing guide. * Automatic oil-circulation lubrication. * Hydraulic overload protection in conjunction with the ORTLINGHAUS Clutch Brake * Safety doors. * Motor-driven ram adjustment 125 mm. * Required space: 4 x 2.2 m. Height max. 4.6 m (only press)

Condition: used, Year of construction: 1985, pressure 63 t passage width 1350 mm stroke 300 mm Fgebvdot Hwxusf Dnsb total power requirement 16 kW weight of the machine ca. 10 t dimensions of the machine ca. 2,0 x 1,8 x 3,4 m

Condition: used, Year of construction: 1984, pressure 10 t distance between columns 500 mm stroke 200 mm Fsbvdet Hwwdsf Dnjgb total power requirement 10 kW weight of the machine ca. 4.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1987, pressure 125 t distance between columns 1050 mm stroke 250 mm total power requirement 40 kW Fjbvdf Det Hwuiensgb weight of the machine ca. 8,5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1992, pressure 75 t throat 280 mm stroke 303 mm total power requirement 15 kW weight of the machine ca. 7000 kg Fgjbot Hwrzsvdf Dnsb dimensions of the machine ca. m

Condition: used, Year of construction: 1984, pressure 500 t passage width 750 mm stroke 120 mm total power requirement 57 kW Fobvdf Dot Hwpyonogb weight of the machine ca. 16 t dimensions of the machine ca. m