Year of construction: 1970, Condition: ready for operation (used), Pressing force: 45t, cutting area: 1000mm², stroke adjustment: 20mm-100mm, ram adjustment: 45mm, stroke rate: 60 strokes/min, table dimensions X/Y: 730mm/500mm, opening in table: 180mm/180mm, table height: 710mm, ram area: 350mm/220mm. On-site inspection is possible. Fgslsvr Ed Heq R Ugpob

Condition: used, Year of construction: 2001, pressure 80 t stroke 200 mm Fjlovx Hq Ueq R Ugpegb

Year of construction: 1980, Condition: good (used), pression: 140 t Fgslq R Ugjhi D I Sopjb spindle diameter: 140 mm table supporting surface: 650 x 650 mm tappet area: 545 x 400 mm max. distance between table and tappet: 700 mm engine: 380 V, 11 kW weight: 3300 kg

Condition: new, working width: 720 mm, pressing force: 30 t, cylinder stroke: 400 mm, - Capacity 30 tons - Cylinder stroke 400 mm - Working width 720 mm - Electric or manual operation - Pressure gauge - Emergency stop - 400 V Fgslq R Ugsr Axznjpsb

Condition: new, Year of construction: 2025, Functionality: fully functional, coil width: 200 mm, overall weight: 80 kg, material width: 200 mm, roll width: 64 mm, sheet width: 200 mm, material thickness: 3 mm, brake voltage: 220 V, warranty duration: 12 months, Silicon+ SFS 200 Servo Roll Feeder Compatible with all kind of presses, primarily used on Bruderer, Schaal and Mabu machines. Feeding length – min 0.10 mm to max. 9999.99 mm Feeding width – max. 100 mm, 200 mm or 300 mm. Depending of model required. Material thickness – 0.20 – 3.20 mm Feeding angle – 180° Die line height – ± 50 mm Fgjlevptz Ijq R Ugpjb Max. feeding speed – 20 m/minute Strip release – Festo pneumatics Control – NC Touch screen Servo brushless motor – 0.75 KW, 1.8 KW or 2.3 KW. Weight approx. feeder: 80-150 kg. Feeder dimensions: 780 X 730 X 680 mm – The unit is driven by the brushless servo motor, with direct drive transmission, eliminate the gear clearance, abrasion, no noise, no lubrication, safely to a synchronized pair of roller segments. – Rolls can be made upon request with PU surface for delicate raw material feeding. – Synchronization of the feeder and punching machine is done easy through cam signal from PLC of a punching machine. – Programmable feeding can be done for up to 10 groups of feeding pitches and saved as recipes. The feed length can be steplessly adjusted during operation EUR 1 certificate of European origin and CE compliance. This information is subject to change without notice, we can make personalized feeders for your needs with prior agreement.

Condition: good (used), very fast SCHULER with Fjlq R Ujvpihkjgpjgb data : Power 63 to Stroke rate 140 H/min throat 250 mm ram stroke 8-100 mm table , WxD approx. 700 x 480 mm installation height approx. 400 mm .

Condition: ready for operation (used), Press force: 160t, stroke adjustment: 20mm-140mm, stroke rate: 10-60 strokes/min, table dimensions X/Y: 1050mm/820mm, opening in table: 300mm/300mm, ram adjustment: 100mm. On-site inspection is possible. Fslq Rovr Edye Ugpjgb

Condition: new, pressure 300 t stroke 600 mm working feed 9 / 14 mm/sec column daylight 1550 mm 600 adjustment of press crosshead 1500 mm slide adjustment -horizontal 3000 mm feed speeds 9 mm/sec return speed 14 mm/sec total power requirement 18,5 kW weight of the machine ca. 35 t - Hydraulics : Rexroth - Controls : Tailor - Cylinder chromed - Operation via remote control & joystick - Stroke length adjustable via sensors - Pressure adjustable via PLC Price on request Fgslq R Ugsvxw Hmspjb

Year of construction: 1979, Condition: used, machine/vehicle number: 3534, Pressing force: 630 kN Return force: 100 kN max. ram stroke: 200 mm Installation height: 400 mm Projection approx.: 350 mm Fjlq Reb Hk Dzj Ugpsgb table size: 610 x 800 mm drop-through hole in the table: 100 mm Drill hole for stool: 40 mm speed of the pusher: 350 mm/s Pressing speed: 18 mm/s Boiler speed return: 380 mm/s Hydraulic drive: 380 V, 15 kW space requirement: 1800 x 920 x 2440 mm Weight: 3,94 t

Year of construction: 1982, Condition: ready for operation (used), Stroke speed: 57-86/min, ram adjustment: 63mm, including documentation. Fgolqei Ati No R Ugpsb

Year of construction: 1973, Condition: good (used), machine/vehicle number: 699, pressure power: 40 t Folq R Ugoy Dpbepsgb table size: 670 x 470 mm tappet area: 670 x 470 mm passage between columns: 620/470 mm max. mounting height: 740 mm pressure speed: 20 mm/s rapid move: 50 mm ejector power: 3 t electrical connection: 380 V, 9,5 kW space needed: 2200 x 1875 x 3000 mm weight: 2400 kg

Year of construction: 1987, Condition: ready for operation (used), Installation height: 408mm, max. working pressure: 315bar, max. pressing force upper piston/lower piston: 630kN/100kN, upper piston retraction force: 71kN, max. stroke upper piston/lower piston: 160mm/80mm, overtravel: 26mm, overtravel time: 106ms, safety distance: 169mm, hydraulic oil capacity: 250l, weight: approx. 3700kg, operating hours: 9283h. Documentation available. On-site inspection is possible. Felq R Ugouxdi Ejpegb

Condition: ready for operation (used), Plate size: 400 x 700 mm Plate thickness: 50 mm Fjlq R Uged Hwnwspogb clear width between the guides: 505 mm Distance between foot and top plate max .: 230 mm Distance between foot and top plate min .: 205 mm Column-Ø: 50 mm

Condition: ready for operation (used), Maximum forming capacity at full length: 9 gauge (mild steel), corresponds to approx. 3.8mm, max. forming length: 3200mm, min. flange height: 6 x material thickness, clamping beam speed: maximum speed: 91.44 mm/s, downwards: 39.88mm/s, bending speed: 1879.6mm/s, bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160mm/2220mm/1780mm, weight: approx. 5300kg. Fslq R Uetia Hhsgpsgb

Year of construction: 1972, Condition: used, machine/vehicle number: 51512/72, pression: 75 t throat: 300 mm table size: 620 x 800 mm clearance hole in the die: 225 x 325 mm table adjustment: 175 mm tappet area: 180 x 475 mm tappet adjustment: 80 mm stroke adjustment: 16 - 140 mm number of strokes: 90 /min engine: 380 V, 3 kW Felsb Tdqusq R Ugpogb space needed: 1700 x 1200 x 2500 mm weight: 3,3 t

Year of construction: 2003, Condition: ready for operation (used), Press force: 400t, stroke rate: 15-120/min, stroke adjustment (defective): 30mm-210mm, fixed stroke: 186mm, ram adjustment: 150mm, overall height: 350mm-576mm, max. belt width: 600mm, table dimensions X/Y: 2000mm/1400mm, shuttle tables on rails: Blue (220mm) and red (250mm), parts conveyor belt X/Y: 800mm/1800mm, dimensions X/Y: 20000mm/6000mm, operating hours: 32000h. Including conveyor system and change trolley. Documentation available. On-site inspection is possible. Fgjlq Rstyyn Te Ugpob

Condition: used, pression: 1,2 kg table size: 110 x 150 mm clearance hole in the die: 20 mm Felq R Uedbmpmsgpjgb throat: 86 mm max. distance between table and tappet: 80/210 mm tappet stroke: 30 mm space needed: 240 x 150 x 510 mm weight: 21 kg

Condition: ready for operation (used), Punching force: 40t, working range: 1500mm/900mm, max. sheet thickness: 4mm, dimensions X/Y/Z: approx. 3700mm/1700mm/1900mm, weight: approx. 2500kg. Including various stamps. Fgelq R Uget Amdrjpsb

Year of construction: 1993, Condition: used, machine/vehicle number: P 285, pression: 800 kN table size: 600 x 900 mm space needed: 1150 x 1900 x 2700 mm weight: 6000 kg Fgslq Re N D Ano Ugpeb

Year of construction: 1976, Condition: ready for operation (used), Pressing force: 400t, table length: 890mm, table width: 780mm, stroke: 180mm, ram stroke: 30-300mm, ram adjustment: 125mm, stroke rate: 55/min, safety distance: 400mm, drive power: 15kW. Machine dimensions X/Y/Z: approx. 2800mm/1000mm/3000mm, weight: approx. 14000kg. Fgjlq R Ugsugmw Sjpjb

Year of construction: 1983, Condition: used, machine/vehicle number: 1338-5, pression power: 30 t Fslq R Uge N Hcgopogb table siize: 500 x 700 mm stroke: 50 mm tappet boring: 40 mm breakdown hole in table: 100 mm total capacity needed: 380 V, 11 kW weight: 2000 kg space needed: 1000 x 2300 x 2170 mm

Year of construction: 1996, Condition: ready for operation (used), Pressing force: 1500kN, max. sheet thickness: 2.5mm (at 450N/mm²), max. tool dimensions X/Y: 350mm/650mm, max. tool weight: 270kg, working speed: 13mm/s, ram stroke: 500mm, weight: approx. 10800kg. Folqstxbzxo R Ugpsgb

Year of construction: 1978, Condition: used, machine/vehicle number: 455 178, pression: 45 t throat: 230 mm table size: 460 x 690 mm Fjlodd Irgsq R Ugpsgb clearance hole in the die: 175 x 220 mm table adjustment: 160 mm tappet area: 185 x 360 mm tappet adjustment: 55 mm stroke adjustment: 4 - 80 mm number of strokes: 120 /min engine: 380 V, 3 kW space needed: 1800 x 1100 x 2100 mm weight: 2800 kg

Condition: used, machine/vehicle number: 478, pression: 36 t max. mounting height: 135 mm electrical connection: 380 V, 7,5 kW space needed: 1700 x 700 x 2150 mm weight: 1800 kg Felq Robb Tguo Ugpogb

Year of construction: 1977, Condition: excellent (used), machine/vehicle number: H77-506, 255 / 5.000 Übersetzungsergebnisse Feljh S H N Hjq R Ugpogb Straightening force: 63 t Projection: 280 mm Table size: 500 x 600 mm Installation height: without straightening bridge 600 mm Max Stroke: 160mm Ram speed up: 117 mm/s m/min Ram speed down: 42 mm/s m/min Required space: 1600 x 700 x 2400 mm Weight: 3900kg