Condition: used, Year of construction: 1982, operating hours: 24,864 h, Functionality: unexamined, total height: 1,800 mm, ram adjustment: 50 mm, total width: 1,250 mm, table length: 250 mm, table width: 460 mm, Automatic punching press, high speed press, eccentric press, single-column press, punching machine, single-column eccentric press. Manufacturer: Kaiser PO 10. Year of manufacture: 1982. Pressure capacity: 10 [tons]. Stroke: adjustable 2 to 40 [mm]. Speed: 120-600 [strokes/min]. Table size: 460 x 250 [mm]. Clamping pin: Ø 32 [mm]; depth 50 [mm]. Central automatic lubrication system. Connection: 380 [V]; 50 [Hz]. Manual speed adjustment on motor. Motor: Stober; 1.1 [kW]; 1450 [1/min]. Single disc clutch and brake. Dimensions: 1250/950/H1800 [mm]. Weight: 850 [kg]. Packing and loading included. Dkjb Hl Ujrk Egzec Isl Feeding device not included, if needed contact for more information.

Condition: new, Year of construction: 2025, throat depth: 280 mm, ram adjustment: 85 mm, drop-through hole in table: 190 mm, table width: 540 mm, table length: 740 mm, stroke adjustment: 100 mm, pressing force: 80 t, table height above floor: 755 mm, ram bore: 40 mm, power: 7.5 kW (10.20 HP), punching force: 80 t, Equipment: safety light barrier, A TYPE ECCENTRIC PRESSES GENERAL FEATURES  Steel construction body,  Stress relief will be applied to the body and welded parts with vibration.  Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards  Pneumatic clutch and brake combination – OMPI-Italy  Ram supported by 8 slides  Parts such as ram, connecting rod, claw are cast steel, GS52  High strength solid crankshaft – 4140  Inside of connecting rod will be bronze, (Zr14)  With spare table,  With hydraulic fuse  Ratchet apparatus table-ram adjustment  Automatic central lubrication,  Pneumatic pedal with ratchet and double hand control with time adjustment,  With electric counter,  PLC application and touch screen – DELTA  Electrical switchgear materials – SIEMENS-SCHNEIDER  Double coil safety valve – GPA, TOPAIR  Locked position switch and panel,  OPTIONAL FEATURES  CE application  Finger protection beam barriers – SICK, LEUZE, KEYENCE  Security PLC (Controls the entire electrical system, valve, double and pedal) – PILZ  Safety wedge,  Protective enclosures will be within the scope of CE.  Speed Control Application  Automatic Lubrication System BODY A TYPE MONOBLOCK BODY TYPE A SERIES Capacity 80 Tons Throat Depth 280 Mm Table-Ram Distance 400 Mm Slide-Table Distance 420 Mm Wall Distance 470 Mm Ram Adjustment 85 Mm Dkjb Hl Ucovxtgie Iol Press Width 1000 Mm Press Depth 1735 Mm Press Height 2300 Mm Front Anchor Dimension 720 Mm Side Anchor Dimension 1040 Mm Table Hole Diameter 190 Mm Table Size 540 / 740 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 370 / 230 Mm Floor Table Dimensions 755 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/Min. Motor Power 7.5 KW Motor Speed 1450 RPM Weight 4,500 Kg ROLL UNCOUNTER AND ROLL DRIVER WILL BE PRICED EXTRA IF REQUESTED. IT IS NOT INCLUDED IN THE PRICE OF THE PRESS.

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Dkeb Houqdwxsl Uc Ijl Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: new, Year of construction: 2025, table area: 2000 x 1000daylight: 700 (Abstand zwiwschen Tisch & Kolbenspitze)table height: 800Cylinder: 240motor: 7,5performance of pump: 22Forward speed: 9Return speed: 13tank capacity: 70 Capacity: 150 tons – 340 Bar / 172 tons – 380 Bar Motor Control: via Hand Lever Cylinder: Manually movable from the side Bridge: Movable via Hand Wheel Table Dimensions: 2000 x 1000 mm Installation Height: 700 mm (distance between table & piston tip) Piston Stroke: 400 mm Table Height: 800 mm Dksb Hljhu H Dps Uc Isl Cylinder: Ø 240 mm Motor: 7.5 kW Pump: 22 Lt./min – ASC Speed: Forward: 9 mm/sec – Return: 13 mm/sec Tank Volume: 70 Lt Pressure Regulator Valve Pressure Gauge Display Pressure Hold Valve Weight: 2300 kg

Condition: used, Year of construction: 1980, . 52965 pressure 10 t oil contents 110 Liter +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Dkjbevxlr De Hl Uc Isl Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears Dobovbk Rwo Hl Uc Iokl - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - hydr. Tool clamping system - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements - Set of hydraulic rolling block bars for simplified tool changing Additional equipment: Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: new, Year of construction: 2025, Functionality: fully functional, stroke distance: 1,750 mm, input voltage: 380 V, table width: 1,500 mm, table length: 2,000 mm, clamping force: 3,000 kN, table load: 14,600 kg, 300T Die Spotting Press Clamping Force:300T Dkobjug Ugho Hl Uc Iel Lifting Force:82T Worktable Size:2000*1500mm Max. Daylight:1750mm Min Daylight:0mm Stroke of Bolster:3000mm Overturn capacity:7.3T Overturn Degree:180° Motor Power:30Kw

Condition: new, Year of construction: 2025, ram adjustment: 100 mm, drop-through hole in table: 210 mm, table width: 700 mm, table length: 900 mm, pressing force: 125 t, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Dksb Hl Uevxhqvoc Iel Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Year of construction: 1991, Condition: good (used), Hydr.horizontal straightening and bending press Pressure capacity max.160 t MAE Type:HY RI 160 RH Year.1991. Dob Hecffzajl Uc Iekl For more data see data sheet.

Condition: new, weight approx.: 1.400motor power: 5,5oil filling: 34performance of pump: 20messurements (LxWxH): 2.000 x 950 x 2.550pressure: 150stroke: 400column width: 1250 Workshop press: - Motor & Hand Control Djb Hslzm E Hsl Uc Iskl - Laterally sliding cylinder - Pump Hema of the Caproni - Manometer - Operating instructions - CE Made in Turkey Option:  Stand width: 1400 (EURO 722 surcharge)

Condition: good (used), Year of construction: 1980, Straightening force: 100 t Thrust: 325 mm Dksb Hlovgcpce Uc Ijl Table size: 490 x 3500 mm Max. stroke: 160 mm Pillar speed up: 206 mm/s Pillar speed down: 68 mm/s Hydraulic drive: 380 V, 15 kW Space required: 3500 x 1650 x 2760 mm Weight: 5500 kg

Year of construction: 1971, Condition: good (used), Pressing force: 63 t Table: 660 x 480 mm Deb Hl Ujh N S Sdoc Iskl ram: 450 x 280 mm throat: 250 mm Ram stroke: 16 to 125 mm Sheet thickness continuous stroke: 3.2 mm max. distance table ram: 417 mm drop-through hole: 280 x 250 mm Adjustment ram downwards: 70 mm Stroke rate: 80 /min Connection: 6 kW Accessories/equipment: Condition: good Weight: 5 t Dimensions: 1.500 x 1.600 x 2.700 mm

Year of construction: 1999, Condition: ready for operation (used), Punching force: 110t, max. punching capacity: 40mm/20mm, throat depth: 750mm, stroke rate: 28/min, max. stroke: 80mm, working height: 1066mm, machine dimensions X/Y/Z: approx. 2300mm/1300mm/2300mm, weight: approx. 4000kg. An on-site inspection is possible. Dsbov Dkcxe Hl Uc Iekl

Condition: new, Year of construction: 2025, ram adjustment: 85 mm, drop-through hole in table: 200 mm, table width: 700 mm, table length: 880 mm, stroke adjustment: 110 mm, pressing force: 100 t, table height above floor: 850 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA Dkjbsvxhpre Hl Uc Isl o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg

Year of construction: 1999, Condition: good (used), Pneumatic press make SCHMIDT Type:ZHS-2/22 year 1999 Dob Hsiduvcel Uc Iokl with two-hand operation. UVV until 2023.

Condition: excellent (used), Year of construction: 1982, LEN 25C Eccentric Press. year of manufacture 1986(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 25 tons Dob Hok Nltlel Uc Iekl - number of jumps in the machine: 76/155 min - number of strokes manual work: 45/60 min - slider stroke adjustment: 8-85 mm - slide stroke: 55 mm - table surface: 560 x 450 mm - slider area: 355 x 225 mm - clearance between columns: 250 mm - number of gears: 2 - engine power: 2.2 / 3 kW - dimensions of the press: 1135 x 1365 x 2145 mm - weight: 2500 kg

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5044270, Pressure force: 25 tons Projection: 200 mm Table size: 450 x 600 mm Drop-through hole in the table: 100 x 210 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Drive Motor: 380V 1.1KW Required space: 1300 x 800 x 2000 mm Dkeb Hl Ucjm Uykvo Iel Weight: approx. 1450 kg

Condition: excellent (used), Eccentric press GALATO MOD. 100T/FZ/TL . Cycle engagement with brake-clutch group. 4-guide hammer. Nominal force: Ton 100 Copi per min: 60 Adjustable stroke: mm 8-108 Plan size: mm 900 x 580 Hammer size: mm 510 x 350 Hammer adjustment: mm 70 Centre wing protrusion: mm 300 Hole diameter: mm 150 Hammer hole diameter: mm 50 Distance between plan and hammer: 500 Distance between shoulders: mm 370 Motor power: Hp 10 Weight approx: Kg 6200 Dimensions: mm 1300 x 1700 x 2650 Front protection with photocells Djb Hl Uevw A Hioc Iskl

Condition: as good as new (ex-display), Year of construction: 2016, We offer an immediately available Hydraulic spotting press with 40 tons pressure. Due to a change of warehouse location, this press is offered at a very competitive price. Pressure 40 t Table length 1000 mm table width 700 mm Machine weight approx. 9 t space requirement approx. 4000 x 4400 x 1800 mm stroke length 1050 mm installation height 1200 mm table rotatable 180 degrees table load max. 5 t forward speed 100 mm/sec return speed 100 mm/sec working speed adjustable from 0 to 10 mm/sec. Main cylinder 1 piece table extendable for 1050 mm Dksb Hljhtm E Ne Uc Iol table tiltable 50 degrees upper tool tiltable 180 degrees Traversing speed of the table 25 mm/sec Pressure, travel and speed adjustable via monitor- control adjustable robust machine body with solid welded construction, manufactured according to DIN 8651 low maintenance and reliable due to robust technology maintenance balcony with marine ladder entire range of motion secured by Sick light barriers Table moves out of the machine to the front and straightens up by 45 degrees on request. Control cabinet to the left of the machine Monitor control with 200 memory locations REMOTE function for remote maintenance Operating manual, technical documents, documentation in German language CE certificate monitor SIEMENS 9" Motors from WEG Hydraulics from Bosch Rexroth Interior lighting Operator panel on swivel arm Two-hand operation on movable stand USB interface for data transfer Siemens control system Light sensors Sick 1250 mm ram plate can be folded down hydraulically, moves up to approx. 175 degrees Columns and cylinders are made of SAE 1045 tool steel (identical to German standard C 45) and are induction hardened and chrome plated on the outside. The linear measuring rod informs the control system of the position of the ram in each case. The travel distance, the upper stop point and the changeover point at which the press is to switch from idle to working speed, as well as the end position to be approached, can be entered easily and quickly via the monitor control. The working speed can be set in 1 mm/sec increments from 0 to 10 sec and in 10 mm increments from 10 to 155 mm. The control monitors the secured areas, all hydraulics and the pump. The control system is housed in a separate control cabinet. The actual press operation is carried out via a control panel mounted on a swivel arm, which reduces the distances involved.

Condition: new, Year of construction: 2025, ram adjustment: 85 mm, drop-through hole in table: 190 mm, table width: 600 mm, table length: 800 mm, stroke adjustment: 100 mm, pressing force: 80 t, table height above floor: 850 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, Dksb Hl Uevxhb Uoc Isl o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Year of construction: 2000, Condition: good (used), 5.pcs in stock Price Applies to 1.pcs. Toggle press Fabr.SCHMIDT Druckl.3 KN. Dksb Hjiduvgol Uc Iel

Condition: good (used), Year of construction: 1989, Functionality: fully functional, total height: 25,500 mm, table width: 800 mm, table length: 630 mm, stroke adjustment: 105 mm, total width: 14,250 mm, total length: 17,900 mm, overall weight: 5,850 kg, pressing force: 63 t, height adjustment type: mechanical, power: 7.5 kW (10.20 HP), Eccentric press LEN 63C. Year prod. 1989(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 63 tons - number of strokes in automatic: 65/130 min - number of jumps manual operation: 45/50 min Dsbetzxdze Hl Uc Iskl - slider stroke adjustment: 10-105 mm - slide stroke: 70 mm - table surface: 800 x 630 mm - slider surface: 450 x 280 mm - overhang: 315 mm - table - slider clearance: 335 mm - clearance between columns: 355 mm - number of gears: 2 - motor speed: 730/1440 min - motor power: 4/7,5 kW - press dimensions: 1425 x 1790 x 2550 mm - weight: 5850 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.

Condition: ready for operation (used), Year of construction: 1970, machine/vehicle number: 5058870, Pressure force: 25 tons Projection: 200 mm Deb Hl Ucsm Uxzuj Iskl Table size: 450 x 600 mm Table adjustment: 240 mm Ram adjustment: 70 mm Stroke adjustment: 4 - 80 mm Number of strokes: 150 / min Drive Motor: 380V 1.1KW Required space: 1600 x 850 x 2000 mm Weight: approx. 1450 kg

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 29,500 mm, total width: 11,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 110 mm/s, overall weight: 3,000 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 13 kW (17.68 HP), PYE 40 S1/M hydraulic press. Year of manufacture 1989. manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Ground clearance 800 mm. Deb Hl Ucstzxqne Iokl Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Power requirement 13 kW. Weight 3180kg. Height 2950mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: good (used), Year of construction: 1984, Functionality: fully functional, total height: 2,400 mm, table width: 660 mm, table length: 530 mm, installation height: 265 mm, stroke adjustment: 95 mm, total width: 1,300 mm, total length: 1,600 mm, overall weight: 4,500 kg, pressing force: 40 t, height adjustment type: mechanical, Eccentric press LEN 40CA. Year prod. 1984(SMERAL TRNAVA Czech Republic). Technical data: - pressing force: 40 tons - number of strokes in automatic: 70 / 142 min - number of jumps manual operation: 50 / 45 min - slider stroke adjustment: 8-95 mm - slide stroke: 80 mm - table surface: 660 x 530 mm - slider surface: 400 x 250 mm - overhang: 265 mm - motor power: 3 / 4 kW - press dimensions: 1585 x 1245 x 2370 mm Dkjb Hl Uceuq A Dks Iol - weight: 4500 kg The technical condition of the machine is good. It is possible to make a visual inspection and check the machine in operation.