Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509, Year of manufacture 1971 Pressure capacity 50 tons Column width 550 mm Column side clearance 150 mm Table surface 480 x 380 mm Table opening Ø 70 mm Ram surface 490 x 280 mm Clamping pin bore Ø 40 mm Max. ram stroke 150 mm Max. installation height 390 mm Table height above floor 890 mm Rapid forward speed approx. 130 mm/sec. Working speed approx. 20 mm/sec. Return speed approx. 130 mm/sec. Motor power: 4 kW Power supply: 380 volts, 50 Hz - Continuous press force adjustment - Rapid stroke and working stroke - Pressure- or stroke-dependent stroke limitation Dobu S Tljv Srfwerocg - Adjustable pressure hold time, press time extension 0.5-6 seconds - Mechanically adjustable fixed stop via handwheel on the ram - SICK light barrier, type LVU - Stroke counter - Double column guide on the ram Space requirement: L x W x H: 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Condition: like new (used), Year of construction: 2024, pressing force: 300 t, Hydraulic 300 T double-column press, 850 x 650 mm Tonnage: 300 T Clearance between columns: 950 mm Cylinder stroke: 450 mm Max. distance between table and ram: 600 mm Table height from floor: 1,000 mm Total height: approx. 3,300 mm Width: approx. 2,020 mm Dobuowarzyj S Tlrocg Depth: approx. 1,250 mm Weight: approx. 7,000 kg Double-speed hydraulic power unit Power: 11 kW Approach speed: 13 mm/sec Working speed: 2.8 mm/sec Return speed: 19 mm/sec Two-hand operation Ram return by pressing the blue button Travel limitation by adjustable sensors Lower fixed table with T-slots, 850 x 650 mm 650 mm Tamper with T-slots, as X, size 750 x 600 mm CE certificate and user manual: Included

Condition: excellent (used), machine/vehicle number: 2421, Hand spindle press fully functional Dcjbuewaq H Uj S Tlrsg

Condition: good (used), Year of construction: 2002, operating hours: 15,000 h, Functionality: fully functional, For sale: 1 used automatic punching press incl. gripper feed unit Manufacturer: Mabu Pressen AG type: 32HSS Gripper feed unit: RC11 YEAR OF MANUFACTURE: 2002 Operating hours: approx. 15,000 Compressive force: 320KN Number of strokes: 100 - 1000 Debstttcdju S Tlrecg Stroke adjustment: 5 - 40 Mass: 6.200Kg For further technical data see type plate and photo documentation. incl. complete documentation. More pictures and video on request. The punch can be inspected in our warehouse in 09599 Freiberg.

Condition: excellent (used), Year of construction: 1984, Functionality: fully functional, pressing force: 450 t, table width: 750 mm, table length: 600 mm, overall weight: 22,000 kg, ram stroke: 250 mm, Equipment: safety light barrier, Dieffenbacher P 04 50 A/S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Dcebjv E Nhpeu S Tlrjg Dieffenbacher P 04 50 A/S press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2017. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: BV25P.267, clearance between the columns: 770 mm, table width: 770 mm, table length: 660 mm, table load: 2,500 kg, The BV 25 P is the smallest version of the Millutensil’s spotting presses. Platen dimensions are 770×660 mm (31X25 inches). The max. clamping force is 180kN. The max. load capacity on lower plate is 2.500 kg, while on the upper is 800 kg. Debu S Tswakkyolrocg This machine has the following extras: Hydraulic ejection unit Automatic special wax injection unit Hydraulic auxiliary cylinder control unit (max. 2+2) ENERGY ACCUMULATOR (SINGLE SHOT)

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction Dsbev Srfkou S Tlrocg - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition

Condition: refurbished (used), Year of construction: 2000, Functionality: fully functional, Equipment: documentation/manual, TECHNICAL CHARACTERISTICS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of construction: 2000 Nominal force: 1600 kN Weight: 13,800 kg Nominal number of strokes: 55 C/min. Min./max. number of strokes: 10/55 C/min. Max. number of insertions: 17 C/min. Min./max. clutch pressure: BAR 4.0÷5.5 Max. stop time: 0.22 s Safety distance: 355 mm. Energy (i=15% nominal strokes): 14,500 KJ Min./max. stroke: 10/200 mm Ram adjustment: 110 mm. PMI high adjustment: 430 mm Maximum extraction stroke: 60 mm Dcsbu S Tjwaiw Solrjg Work surface dimensions (H, D, L): 78/750/1250 mm Ram dimensions (D, L): 600/850 Shank diameter: 60 mm Protrusion from the center: 370 mm Maximum mold size: 600/850 mm Maximum mold head weight: 344 daN Operating air pressure: BAR 5.5÷6 Stop position: TDC Voltage: V 380 Frequency: 50Hz Auxiliary voltage: V 24 NEW COMPONENTS INSTALLED: • Safety guards with safety keys; • Clutch plates; • Clutch pins and brite; • Flywheel bearings; • Flywheel oil seals; • Stroke change nose; • Balancing cylinder gasket kit; • Air pressure gauges; • Electrical panel; • Inverter (speed variator); • Motor; • Motor pulley; • Work surface revived on CNC machine Supplied with six (6) months warranty, technical documentation and CE conformity Twelve (12) months electrical panel warranty.

Condition: good (used), AOTR adapter (28470) for OTR Make Starkstrom Gummersbach Test adapter for presses Djbuer Ar A Sj S Tlrjcg

Condition: like new (used), Year of construction: 2014, 4 meter width Nominal pressure 1250 kN CNC Back Gauge Quick Change Tooling Dsbu S Tlolqwvkjrscg

Condition: excellent (used), Year of construction: 1973, Functionality: fully functional, pressing force: 400 t, table width: 900 mm, table length: 850 mm, overall weight: 23,000 kg, Equipment: safety light barrier, Hans Shoen UTE/B 400 Press Dsbu Sev E Rpno Tlrecg A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Possibility to check the machine in operation - The press is still connected to the power supply. Hans Shoen UTE/B 400press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2020. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: like new (used), Year of construction: 2019, Functionality: fully functional, machine/vehicle number: BV28E.081, clearance between the columns: 1,200 mm, table width: 1,200 mm, table length: 1,000 mm, table load: 7,000 kg, BV 28 E is the advanced version with a hydraulic system controlled by electronic servo proportional valves and a control of parallelism through Heidenhain optical lines. The BV 28 E is equipped with user-friendly graphics control panel, monitored through Siemens PLC commanded by Touch Panel. Platen dimensions are 1.200×1.000 mm (47X39 inches). The max. clamping force is 500kN. The max. load capacity on lower plate is 7.000 kg, while on the upper is 2.500 kg. It has the following options on it: ENERGY ACCUMULATOR (SINGLE SHOT) Automatic special wax injection unit Hydraulic auxiliary cylinder control unit (max. 2+2) Dsbu S Tlowakkmsrjcg Hydraulic ejection unit

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Dcjbjv Srfdeu S Tlrsg Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: used, manufacture Tucker Type ERC80/ERF23FBGR/ERT In our opinion, the machine is in good used condition and can be viewed under power by appointment. Punch riveting system: - ERC80 Dcebu S Tlsvdt Spsrsg - ERF23 - BGR - ERT There are approximately 150 pieces available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: ready for operation (used), total height: 5,500 mm, total length: 1,500 mm, passage width: 1,000 mm, power: 55 kW (74.78 HP), load capacity: 1,000,000 kg, net weight: 25,000 kg, total depth: 1,500 mm, 4 column hydraulic press high closing speed ideal for composite projects press can remain under pressure for a long period of time one main hydraulic single acting piston (diameter 660 mm) two smaller pistons to retract the stamp heating can used as an option (on/off) Dsbu Sev Sfp Ns Tlrjcg is installed on top of ground! hole in table for counterpressure (stroke 200 mm) Rexroth hydraulic unit 300 bar operating pressure Max ram adjustment: 800 mm Distance between table -- ram: 1400 mm Table area: 1200 x 1000 mm

Condition: excellent (used), Eccentric Press Inv. No. 3542 Djbu S Tjwab Ntslrecg Manufacturer: Muller Type EXP 15 SV Press force: 15 tons * Stroke adjustment: 4 to 60 mm * Ram adjustable by 40 mm * Stroke rate: 120 rpm * Installation height: mm * Throat depth: 160 mm * Table surface: mm * Adjustable table: mm * Foot-operated operation Machine weight: approx. 1000 kg.

Condition: ready for operation (used), Pressing force: 63t, operating pressure: 160bar, pressing speed downwards/upwards: 200mm/400mm/s, ram stroke: 500mm, throat depth: 360mm, max. ram table distance: 800mm, weight: approx. 4200kg. On-site inspection is possible. Djbu S Tlswaa E Herjcg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, total height: 3,550 mm, total width: 2,260 mm, pressing force: 80 t, table width: 2,100 mm, table length: 840 mm, table height above floor: 1,200 mm, overall weight: 12,000 kg, EXNER PG 80 Tool Test Press Year of manufacture: 2015 Number of press cylinders: 2 Dobusv U T R To S Tlrjcg Nominal force (adjustable) 2 x 400 kN Retraction force 2 x 150 kN Ram stroke 350 mm Ram width: 2100 mm Ram depth: 840 mm Installation height: 550 mm Table width: 2100 mm Table depth: 840 mm Table clearance 1300 x 125 mm Front column clearance 1700 mm Side column clearance 600 mm Table height above floor 1200 mm Ram speed at load up to 100% approx. 0-10 mm/s Ram return speed approx. 0-20 mm/s - Electronic roller feed unit EV 22 AK included Belt width: max. 220 mm Belt cross-section: max. 200 mm² Feed length: 0.1 x 19,999 mm Speed: max. 120 m/min Roller opening: max. 4 mm Accuracy: +/- 0.05 mm Roller diameter: 38.2 mm The system is equipped with a Zehnder Sommer feeder. This is mounted on the left side and can be moved backwards from the side area. Appropriate safety devices for automatic continuous operation are provided.

Year of construction: 2024, operating hours: 2 h, Condition: as good as new (ex-display), Functionality: fully functional, DESTACO pneumatic power cylinder WK3000-30-6-1. Article number 0576762. Was purchased in 2024 for a test only. Inspection is possible. Sold without guarantee and return. Dcsbjvb Di Tou S Tlrog

Condition: used, Year of construction: 1980, Technical details: pressure: ca. 100 t distance between columns: 500 mm throat: bis Mitte Stößel / up to center ram: 350 mm dayligth: 450+100 mm min. ram stroke: 26 mm max. ram stroke: 152 mm ram adjustment: möglich/possible mm ram surface area: 550 x 400 mm Djbuju Nfhde S Tlrscg clamping table: 1020 x 710 mm total power requirement: 10 kW weight of the machine ca.: ca.7 t space requirement approx.:: L:2,0 x B:1,7 x H:3,2 m WITHOUT drawing cushion Can be demonstrated in idle run. i.D. *

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Debu S Tlju Nfinjrscg Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm *

Condition: used, Year of construction: 1981, Technical details: pressure: 250 t Dcobsu Nfkleu S Tlrog slide stroke: 36...126 mm throat: 400 mm ram adjustment: 110 mm surface area of ram: 630 x 500 x 100 mm dayligth: 400 mm Table dimensions: 1000 x 750 x 100 mm table height over floor: 1000 mm total power requirement: 23,0 kW weight of the machine ca.: 13,5 t dimensions electric cabinet LxWxH: 1,1 x 0,7 x 1,3 m dimension machine xH: 3,0 x 1,3 x 3,3 m further details: - control via 2 hand control console or with foot pedal - foot plates Ø 220mm accessory: - column punch device *

Condition: used, Year of construction: 1982, Technical details: pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V Dobu Sou Nfmys Tlrscg control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm Dcebsu Nfuqsu S Tlrog ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s Dcebu S Tlsu Nfvboreg mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) *