Condition: excellent (used), Year of construction: 1988, Functionality: fully functional, total height: 3,700 mm, total width: 1,250 mm, total length: 2,200 mm, throat depth: 800 mm, pressing force: 250 t, table width: 900 mm, table length: 630 mm, operating speed: 200 mm/s, overall weight: 8,000 kg, reverse speed: 110 mm/s, ram plate width: 750 mm, ram plate length: 450 mm, ram stroke: 500 mm, oil tank capacity: 500 l, PYE 250 S1M hydraulic press with ejector. Prod. by WMW VEB Zeulenroda (Germany). 1988. Parameters: Maximum pressing force 250 tons. Working pressure 20 MPa. Upper table 750x450 mm. Lower table 900x630 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 110 mm/sec. Ejector force 100 tons. Ejector stroke 200 mm. Power requirement 20.5 kW. Weight 8000kg. Dcobjvcb Tls Hbwa Rog Height 3680mm, length 2200mm, width 1250mm. Technical condition of the machine very good. Machine after general overhaul.

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, machine/vehicle number: A5137, Refurbished 100-ton HEILBRONN C-press, currently undergoing retrofitting - available at short notice. Hydraulic clutch-brake combination, automatic central grease lubrication, manual ram adjustment, mechanical overload protection, new lubrication/hydraulic hoses, etc., new control system (adjustments still possible). Dimensions - see machine drawing as PDF. Technical specifications: Press force: 1,000 kN Speed: 50 rpm (variable speed optional) Variable stroke: 14 - 150 mm Ram adjustment: 80 mm Dcob Hbwowb A Dzea Reg Installation height: 420 mm (max. stroke at bottom, adjustment at top) Table: 650 x 500 mm Ram: 400 x 250 mm Thrust: 350 mm Drive power: 5.5 kW Approx. weight: 5,500 kg

Condition: used, Functionality: fully functional, machine/vehicle number: 71737, total width: 640 mm, total length: 1,575 mm, total height: 1,970 mm, overall weight: 645 kg, input voltage: 3,000 V, pressing force: 40 t, pressing speed: 5 mm/s, The hydraulic two-column assembly and pressing press with a force of 40t OKS 1671M is designed for straightening parts, pressing in and out of sleeves, bushings, bearings, gears, as well as other pressing works during the repair of tractors, cars and agricultural machinery. The press can be used for cutting, bending, drawing and other operations. Maximum force, kN (tf) – 392(40) Maximum working pressure in the hydraulic system, MPa (kgf/cm2) – 20(200) Piston stroke, mm – 250 Piston speed during the working stroke, mm/s – 5 Maximum distance between the table and the piston, mm – 1000 Maximum table travel, mm – 750 Dimensions of clearances between the posts, mm: from front to back – 250 from left to right – 1000 Dimensions of the table support plates, mm – 400х450 Working fluid – industrial oil I20A GOST 20799-75 Pump type – eccentric three-plunger Feed, l/min – 5 Nominal speed, rpm – 1500 Power consumption, kW – 3 Dcsb Hbswbz Irswa Rog Overall dimensions, mm – 1575х640х1970 Weight, kg – 645

Condition: new, distance between stands: 2,000 mm, cylinder stroke: 400 mm, - Capacity 100 tons - Cylinder stroke 400 mm - Working width 2000 mm - Electric or manual operation - Pressure gauge - Emergency stop - 400 V Deb Hbwaowbutuj Rocg

Condition: new, Year of construction: 2024, operating hours: 5 h, Functionality: fully functional, Heli electric forklift, very robust, no unnecessary electronics Side shift, lighting, indicators, rear-view mirror, protective roof, trailer coupling, power steering Solid rubber tires at the front, pneumatic tires at the rear With charger Dcsb Hsv A Rq Tebwa Rsg Length 2200mm Width 1120mm Height 2130mm Lifting height 3000mm Total weight 2935Kg

Condition: as good as new (ex-display), Metal band saw demonstration unit MBS210FH with gentle hydraulics, automatic cut shutdown, electric coolant system, quick-release vice, base, CE, 169kg; symbol photo Dob Hbwaovrvups Rocg Prices subject to change, errors, printing and typesetting errors reserved

Condition: excellent (used), Year of construction: 1990, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 2,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, die cushion stroke: 160 mm, clearance between the columns: 800 mm, power: 8.75 kW (11.90 HP), PYE 25 S1M hydraulic press with ejector. Year of manufacture 1990. manufacturer VEB Wema Zeulenroda (Germany). Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Dcebstzwxdo Hbwa Reg Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Upward speed 450 mm/sec. Ejector force 10 tons. Ejector stroke 160 mm. Power requirement 8,75 kW. Weight 2200kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: like new (used), 1 used press table in very good conditionDimensions: 500 x 380 mm Dceb Hod Tmfmobwa Rsg

Condition: used, Year of construction: 1979, pressure 10 t Dsb Hjwbizyobwa Rocg throat 250 mm stroke 400 mm feed down 100 mm/sec feed up 450 mm/sec max. distance table - ram 630 mm total power requirement 5,2 kW weight of the machine ca. 1,3 t

Condition: excellent (used), Year of construction: 1985, Functionality: fully functional, pressing force: 4,000 t, Forging hammer SMERAL type KJH 4 Pneumatic-hydraulic die counterblow forging hammer. Weight of the ram, kg: 1,800 Ram impact rated energy, kgm: 4'000 Number of ram strokes, 1/min: 48 Ram stroke, mm: 500 Die camping area, mm: 286 x 600 Min. Die Height, mm: 350 Output of main motor, kW: 45 Length of the machine, mm: 3'100 Dcobjwbgino Hbwa Rog Width of the machine, mm: 1'900 Height of the machine, mm: 3'900 Weight of the machine, kg: 27'000

Condition: excellent (used), Year of construction: 2008, operating hours: 24,873 h, Functionality: fully functional, Bruderer BSTA 500-110B with BBV 202/120 -B-Control -Tool area 1100mm -Adjustable stroke -complete documentation - Soundproof cabin - Double pallet decoiler ( Huras ) - Machine checked, in very good condition! Dsb Hbwajtwltvo Rocg contact us!

Condition: excellent (used), Schuler PE4s 50/800 high-speed press  Manufacturer: Schuler   Type: PE4s 50/800 High speed press 61/21 600/3 pressing force: 50 t Dceb Hbwajgryc Nj Rog throat depth: 800 mm Stroke rate /min: 125-300 slide stroke: 40 mm Kohler decoiler 500.1 M After the purchase you will also get the documentation We sell a large number of paternosters. In addition to approx. 50 paternosters, there are countless other machines available. After purchase the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying. Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1977, Functionality: fully functional, total height: 27,500 mm, total width: 10,500 mm, total length: 16,500 mm, pressing force: 25 t, table width: 630 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 2,400 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 360 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 12.5 kW (17.00 HP), PYE 25 SS hydraulic press. Year of manufacture 1977. manufacturer VEB Wema Zeulenroda (Germany). Dcsb Hbwstzxvwoa Rog Parameters: Maximum pressing force 25 tons. Working pressure 16 MPa. Upper table 450 x 360 mm. Lower table 630 x 500 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 12,5 kW. Weight 2400kg. Height 2750mm, length 1650mm, width 1050mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: used, Hare 5iT Hydraulic Press Complete with 8 and 4 station rotary table Dcjb Hbwev Tyuvja Rsg

Condition: excellent (used), Technical data: Number of pistons: 6 Dceb Howbdfajbwa Reg Piston diameter: 65 mm Connection to CO. Shelf dimensions: 1300x3000 mm Clearance: 400 mm Hydraulic pressure Safety switch Motor power: 3 kW Power supply: 380 V Overall dimensions: Length: 3530 mm Width: 1470 mm Height: 2020 mm

Condition: used, Year of construction: 2001, table width: 2,000 mm, table length: 2,066 mm, installation height: 1,710 mm, pressing force: 1,000 t, ram stroke: 900 mm, controller manufacturer: SIEMENS, controller model: S7-400, power: 160 kW (217.54 HP), overall weight: 140,000 kg, lifting height: 900 mm, worktable length: 2,066 mm, distance table to ram: 1,700 mm, tool height: 1,710 mm, CONTROLS .. PLC SIEMENS S7-400 PRESS DESIGN .. drive system: hydraulic .. number of suspensions: 1 .. slide ejectors / cushion: no Dcob Hbwsurcmnoa Reg .. table cushion: no .. opening in table: no .. feedstock transport direction: back-front PRESS FORCES .. total force (nominal): 1000 to PRESS TABLE .. table surface (left-right): 2066 mm .. table surface (front-back): 2000 mm .. height above floor level: 630 mm SLIDE .. stroke: 900 mm SLIDE (HYDR. PRESS) .. approximation velocity max.: 600 mm/s .. working velocity min.: 15 mm/s .. working velocity max.: 40 mm/s .. return velocity max.: 390 mm/s .. return force: 100 to TOOL ASSEMBLY DIMENSIONS .. shut height (stroke down, adjustment up), BDC: 1710 mm .. distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS .. total power consumption: 160 kW .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. height above floor level: 6500 mm .. total weight approx.: 140000 kg ATTACHMENTS (PRESSES) .. press automation: yes .. gripper transfer system: yes .. acc. to actual accident protection regulation: yes .. European CE standards: yes Complete hot forming line (sheet metal applications) consisting of: * 1000 to. hydraulic press LASCO * Schwartz furnace system: - max. lining width: 1700 mm - Furnace length: 27060 mm * Strothmann feeder * ABB loading and unloading robot

Condition: used, Year of construction: 2013, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 2.000 x 1.200 mm Slide area: 2.000 x 700 mm Hole in table: 1.910 x 300 mm Number of strokes: 30 - 300 s.p.m. Deb Hbwsv Tvg Usa Recg Required power: 57 kW Weight of machine approx.: 39 ton Standard configuration Dreher roll feeder Extended machine accessories

Condition: used, Year of construction: 1971, Hydraulic Müller Press Press force 5,000 kN Dcsb Hbwov Nwc Nja Rjg Table size 2,750 x 1,500 mm Ram area 2,750 x 1,500 mm Installation height 1,670 mm Stroke 1,070 mm Ram cushion force 46 MP Ram cushion stroke 150 mm Die cushion force 140 MP Die cushion stroke 300 mm

Condition: excellent (used), Year of construction: 1975, Functionality: fully functional, total height: 31,500 mm, total width: 13,500 mm, total length: 17,500 mm, pressing force: 40 t, table width: 1,000 mm, table length: 500 mm, operating speed: 200 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, power: 15 kW (20.39 HP), PYE 40 SS hydraulic press with ejector. Year of production 1975, manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Replaced piston seal. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 1000 mm. Ground clearance 800 mm. Cylinder stroke 500 mm. Down speed 200 mm/sec. Upward speed 450 mm/sec. Power requirement 15 kW. Dcob Hstzxtpjbwa Rjg Weight 3200kg. Height 3150mm, Length 1750mm, Width 1150mm. Technical condition of the machine very good. The machine after a general overhaul. It is possible to make a visual inspection and check the machine in motion.

Condition: new, pressing force: 10 t, - Capacity 10 tons - Cylinder stroke 600 mm - Pressure indicator - Emergency stop Dceb Hegwxm Hjbwa Reg - 400V

Condition: used, Single-column hydraulic press SCHÖN type TES/C Year of manufacture 1977 Pressing force 63 tons (160 bar) Thrust 320 mm Table size 600 x 770 mm Ram surface 600 x 400 mm Ram stroke 125 mm Deb Hbwjv Tp D Tja Rocg Max. installation height 400 mm (with intermediate plate on the ram) Rapid downward traverse speed approx. 180 mm/sec. Rapid working speed approx. 25 mm/sec. Rapid upward traverse speed approx. 180 mm/sec. Table height above floor: 870 mm Drive power: 22 kW Power supply: 380 volts, 50 Hz Tank capacity: approx. 280 liters of hydraulic oil - Adjustable fixed stop - Electric two-hand operation - Intermediate plate on the ram: L x W x H 500 x 500 x 50 mm Space requirement: L x W x H 2400 x 1100 x 2750 mm Weight: 4 tons Good condition

Condition: new, Year of construction: 1984, pressure 80 t throat 280 mm stroke 10-100 mm Dcsb Hjwa Umljbwa Rog no. of strokes 52/80 Hub/min ram - range of adjustment 60 mm table surface area 850x550mm mm ram surface 420x220 mm hole in the table 300x200 mm table height 780 mm tool hole in ram Ø 45 mm weight of the machine ca. 4,5 t dimensions of the machine ca. 2000x2000x2700mm m

Condition: used, Year of construction: 2009, Press capacity: 160 ton Ram stroke adjustable: 12 - 120 mm Djb Hjv Tvgnebwa Rjcg Slide adjustment: 100 mm Shut height (stroke down, adjustment up): 420 mm Table surface area : 1.600 x 1.200 mm Slide area: 1.600 x 700 mm Hole in table: 1.510 x 300 mm Number of strokes: 30 - 300 s.p.m. Required power: 51 kW Weight of machine approx.: 32 ton Standard configuration Dreher roll feeder Extended machine accessories

Condition: excellent (used), Year of construction: 1986, Functionality: fully functional, total height: 3,050 mm, total width: 1,750 mm, total length: 1,150 mm, pressing force: 40 t, table width: 630 mm, table length: 500 mm, operating speed: 100 mm/s, overall weight: 3,200 kg, reverse speed: 450 mm/s, ram plate width: 450 mm, ram plate length: 380 mm, ram stroke: 500 mm, distance between stands: 800 mm, oil tank capacity: 300 l, Equipment: documentation/manual, Hydraulic press PYE 40 S1/M with ejector. Year of manufacture 1986. Manufacturer VEB Wema Zeulenroda (Germany). Machine after general overhaul. Piston seal replaced. Parameters: Maximum pressing force 40 tons. Working pressure 16 MPa. Upper table 380 x 450 mm. Lower table 500 x 630 mm. Djb Hbwswbt Uqja Rscg Clearance 800 mm. Cylinder stroke 500 mm. Down speed 100 mm/sec. Up speed 450 mm/sec. Ejector stroke 200 mm. Ejector force 16 tons. Power demand 13 kW. Weight 3180 kg. Height 3050mm, Length 1750mm, Width 1150mm. The technical condition of the machine is very good. The machine has been overhauled. It is possible to inspect and check the machine in motion.

Condition: used, Single-column eccentric press BERRENBERG Type EPtG 20-325 N-0 Mach. No. 15342, Year of manufacture 1974 Pressing force 20 tons Projection 320 mm Table surface 550 x 350 mm Through hole in table 190 x 120 mm Push surface 305 x 140 mm Table intermediate plate L x W x H 540 x 340 x 55 mm Through hole in table intermediate plate Ø 103 mm Clamping pin bore Ø 40 mm Stroke adjustment 8 - 70 mm Push adjustment 35 mm Installation height max. 345 mm (without table intermediate plate) Dcebsv Tp D Hj Hbwa Reg Installation height max. 290 mm (with table intermediate plate) Table height above floor 700 - 750 mm (without table intermediate plate) Stroke rate 100 to 180 strokes/min. Drive power 1.5 kW Power supply 380 V, 50 Hz - Pneumatic clutch-brake combination, manufacturer: ORTLINGHAUS - Electric foot switch and two-hand operation - Stroke rate continuously adjustable via variator drive - Table height adjustment via threaded spindle approx. 150 mm - Manual central grease lubrication BEKA Schmiertechnik - Height-adjustable press table via threaded spindle - Electrical diagram Space requirement L x W x H 1600 x 850 x 1950 mm Weight 1250 kg Good condition