Condition: used, Year of construction: 1994, Pressure 100 t distance between columns 910 mm stroke 600 mm distance table/ram, stroke up 1000 mm table surface area 1340 x 1085 mm hole in the table 705 x 405 mm table height over floor 800 mm side window 685 mm ram surface 1235 x 1000 mm oil volume 450 l capacity of ejector 7,5 t ejector stroke 150 mm speed down 380 mm/s speed up 185 mm/s working speed 28 mm/s oil volume 450 l power requirement 15,0 kW weight 9,5 t dimensions (WxDxH) 2,3 x 1,9 x 3,6 m hydraulic fast-stroke trimming press for cast parts with oilhydraulic drive, light guard (Sick), hydraulic blank holder / ejector in ram (7,5 t / 150 mm), control device for hydraulic blank holder, pneumatic ram interlocking table surface 1340 x 685 mm or 910 x 1085 mm Dolip Tevuk E Ie Dtjcg ram surface 1235 x 685 mm or 910 x 1000 mm as is where is, WITHOUT putting into operation

Condition: good (used), Functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes Dcolipewc Ntxs T Dteg throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: good (used), Used workshop press from top brand Enerpac Type: RP 100 Doliswc Nlusp T Dtscg Capacity: 100 tons

Year of construction: 1990, Condition: used, Erfurt press force 160 tonnes table 120x80 Delip T Dswfucdetscg

Year of construction: 1975, Condition: ready for operation (used), A Weingarten single-column eccentric press is available. Press force: 200kN, stroke rate: 40rpm, throat: 550mm, rear-front passage: 800mm, table ram distance: 400mm, ram stroke: 40mm-180mm, ram adjustment: 110mm, ram dimensions X/Y: 1200mm/800mm, table dimensions X/Y: 1200mm/1000mm, mortise diameter: 50mm, mortise depth: 85mm, motor power: 15kW, machine weight: approx. 13200kg. On-site inspection is possible. Dcjlswftc Noip T Dtsg

Condition: used, Year of construction: 2002, Functionality: unexamined, machine/vehicle number: 71439-1, overall weight: 850 kg, electrical fuse: 16 A, nominal voltage: 400 V, usable length: 360 mm, For sale is a rotary table press from a series Dcsljwfqdqeip T Dtjg From the Magna inventory Fully functional and fully serviced including control system.

Condition: used, Year of construction: 1985, pressure 100 t stroke 650 mm throat 380 mm dayligth 950 mm table surface area 800 x 700 mm table height over floor 920 mm ram surface 630 x 600 mm feed down 16 - 65 mm/s feed up 375 mm/s working feed 0 - 16 mm/s oil volume 350 l power requirement 18,5 kW Weight 9,0 t Delevuk Ezsip T Dtscg dimensions of the machine ca. 1,5 x 2,5 x 4,0 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, speed adjustable, two-hand operation can be offered with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: good (used), Type DO 3 Machine No. 3492 Dslewc Ntfeip T Dtocg Force 20 kN Stroke 39 mm

Year of construction: 2001, Condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm Dcjlipsp Dt Taj T Dtsg - Weight approx. 2500 kg

Year of construction: 1990, Condition: ready for operation (used), Pressing force: 2000kN, max. stroke: 400mm, throat depth: 300mm, ram table distance: 965mm, ram speed forward/reverse: 100mm/s, working speed: 10mm/s, table width: 1700mm, working length: 2600mm, working height: 1080mm, column distance: 2300mm. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 17500kg. On-site inspection is possible. Deliswftdasp T Dtjcg

Condition: used, Year of construction: 1988, pressure 300 t distance between columns 1800 mm stroke 1000 mm Distance table/ram, max. stroke up, adjustment up 1300 mm Table surface area 1600 x 1200 mm Dcelipovut Hns T Dtsg Table height above floor 1080 mm Ram surface 1600 x 1200 mm Weight 24,0 t Dimensions (WxDxH) 2,8 x 2,1 x 6,0 m permitted for manual loading according to the German Safety Regulations (UVV §20) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be offered without putting into operation or alternatively with new control Siemens S 7-1500 F Video at seller's site before dismantling available

Condition: good (used), Year of construction: 1977, Offer 25021 Technical data approx.: - Pressure force 250 t - Projection 360 mm Djlip Tsvmx N Ee Dtjcg - Table size approx. 1100 x 800 mm - Hole in the table approx. 320 mm - Ram surface approx. 800 x 475 mm - Tenon hole in the ram mm - Ram adjustability 110 mm - Stroke adjustment 30 - 140 mm - Max. stroke rate 45 1/min - Pneumatic connection 6 bar - Drive 400 V / 22 kW - Space requirement approx. W 1400 x H 2990 x D 2700 mm - Weight approx. 13 T

Condition: used, Year of construction: 2000, pressure 075 t throat 295 mm stroke 16 - 140 mm Stroke rate 75 / min Distance table/ram, max. stroke up, adjustment up 450 mm Table surface area 800 x 595 mm Hole in the table 330 x 230 mm Table height above floor 745 mm Ram surface 470 x 180 mm Ram adjustment 80 mm Power capacity 5,5 kW Dcelipsvut Hhj T Dtsg Weight 5,0 t Dimensions (WxDxH) 1,5 x 2,5 x 2,5 m overhauled by the manufacturer in 2000 permitted for manual put-in according to the German Safety Regulations (UVV) with motor, pneumatic clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, motorized central lubrication, two-hand and foot operation press can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 1962, machine/vehicle number: 5601062, Offer 24287 Technical data: - Compressive force 60 t - Projection 350 mm Dcjlip Teu Ilkis Dtog - Table size approx. 900 x 600 mm - Table height adjustable - Drop-through hole in table approx. 300 x 200 mm - Maximum installation height approx. 360 mm - Plunger surface approx. 340 x 160 mm - Pivot hole in plunger 40 mm - Plunger adjustment 60 mm - Stroke adjustment 10 - 90 mm - Stroke rate 110 1/min - Rotary wedge clutch - Drive 400 V / 5.5 kW - Space requirement approx. W 2000 x H 2200 x D 2400 mm - Weight approx. 3500 kg

Condition: used, Year of construction: 1977, pressure 080 t throat 280 mm stroke 8 - 112 mm no. of strokes 30 - 120 /min distance table/ram, max. stroke up, adjustment up 500 mm table surface area 840 x 580 mm hole in the table 150 mm table height over floor 910 mm passage to the back 640 mm ram surface 560 x 300 mm ram adjustment 80 mm power requirement 7,5 kW weight 8,0 t Dcslip T Djvut E Rotog dimensions (WxDxH) 1,6 x 2,3 x 3,3 m permitted for manual put-in according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch, hydraulic overload protection in ram, motoric ram adjustment, inclineable, two-hand operation press can be inspected in running condition in our warehouse

Condition: good (used), Year of construction: 2000, Offer 24467 Technical data: - max. pressing force 10 t - max. ram stroke approx. 550 mm - Tool mounting thread M 16 - Width of column approx. 1000 mm - Column depth approx. 500 mm - Min. / max. installation height 450 / 1350 mm - Table height adjustable - Space requirement approx. W 1600 x H 2650 x D 850 mm - Weight approx. 350 kg Dcelipsuzhmgs T Dteg

Condition: used, Year of construction: 1978, pressure 050 t throat 250 mm stroke 8 - 120 mm no. of strokes 100 /min distance table/ram, max. stroke up, adjustment up 400 mm table surface area 650 x 515 mm hole in the table 115 mm table height over floor 790 - 1020 mm table adjustable 230 mm ram surface 390 x 180 mm ram adjustment 70 mm power requirement 2,0 kW Dslip T Djvut E Djtecg weight 2,6 t dimensions (WxDxH) 1,1 x 1,4 x 2,2 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with motor, rolling-key clutch, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, adjustable table, foot operation can be inspected in running condition in our warehouse

Year of construction: 1980, Condition: good (used), machine/vehicle number: 3253-80, Offer 22045 Technical data approx: - Compressive force 10 t - throat 150 mm - Table size . 520 x 320 mm - Table height adjustable 160 mm - drop-through hole in table 165 x 125 mm - gr. installation height 220 mm - ram surface 240 x 150 mm Dcelsktg Dhsip T Dtjg - mortise in ram 30 mm - ram adjustability 40 mm - stroke adjustment 4 - 60 mm - stroke rate 130 1/min - hydr. actuated clutch - Two-hand operation - E. foot switch - separate switch cabinet - drive 380 V / 1,1 kW - space requirement approx. W 1000 x H 1800 x D 1100 mm - weight approx. 1300 kg

Condition: used, Year of construction: 1973, pressure 500 t distance between columns 1620 mm stroke 40 - 160 mm no. of strokes 32 / 48 Hub/min dayligth (stroke and adjustment up) 660 mm column travel -side 400 x 430 mm table surface area 1600 x 1300 mm table height over floor 750 mm ram surface 1400 x 1200 mm power requirement 44,0 / 66,0 kW weight of the machine ca. 56,00 t required space 3,55 x 2,55 x 5,1 m with pneumatic clutch/brake combination (Desch), mechanical overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment Dslipjvuk Eus T Dtscg as is where is, WITHOUT putting into operation Video of 'sister maschine' available

Condition: good (used), Year of construction: 1970, Offer 25020 Technical data: - Pressure force 200 t - Projection 400 mm - Table size approx. 1000 x 750 mm - Hole in the table approx. 320 x 220 mm - Ram surface 940 x 400 mm Dcelijvnmblsp T Dteg - Ram adjustability 100 mm - Stroke adjustment 20 - 130 mm - Drive 380 V / 10 kW - Space requirement approx. W 1400 x H 2980 x D 2900 mm - Weight approx. 13000 kg

Condition: used, Year of construction: 1985, pressure 500 t distance between columns 3100 mm stroke fix 300 mm no. of strokes 20 - 70 Hub/min dayligth (stroke and adjustment up) 1000 mm column travel -side 1400 mm table surface area 2800 x 1600 mm ram surface 2800 x 1450 mm power requirement 90,0 kW weight of the machine ca. 100,00 t required space 5,75 x 3,2 x 7,8 m ram adjustment 100 mm height over floor 6,4 mm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment as is where is, WITHOUT putting into operation, stored in dismantled condition (no PLC + main motor available) Delip Tjvut N Ae Dtjcg

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm Dcslovut Ewoip T Dtjg stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 1990, pressure 60 t throat 400 mm stroke 600 mm dayligth 700 mm table surface area 1120 x 700 mm table height over floor 850 mm ram surface 700 x 700 mm feed down 300 mm/sec Dslip T Dsvut Edotscg feed up 130 / 260 mm/sec feed under pressure 5 / 10 mm/sec oil volume 275 l total power requirement 7,5 kW weight of the machine ca. 7,3 t required space 1,6 x 2,0 x 3,7 m permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependant on pressure/time and way, two-hand operation can be inspected in running condition in our warehouse - new control can be offeren on request

Condition: used, Year of construction: 1991, pressure 125 t distance between columns 2100 mm stroke 1000 mm dayligth 1300 mm table surface area 2230 x 1300 mm die cushion capacity 63 t die cushion stroke 60 mm die cushion area 1000 x 900 mm table height over floor 1050 mm ram surface 2100 x 1000 mm feed down 50 mm/sec feed up 50 mm/sec working feed 10 mm/sec oil volume 410 l power requirement 22,0 kW weight 31,0 t required space 3,1 x 1,7 x 5,95 m hydraulic try-out press permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table and ram, hydraulic ejector in table, ram interlocking, two-hand operation No foundation pit necessary can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F Dolievut D Tsp T Dtscg

Condition: used, Year of construction: 1988, Pressure 063 t throat 250 mm stroke 10 - 100 mm no. of strokes 120 /min distance table/ram, max. stroke up, adjustment up 380 mm table surface area 700 x 500 mm hole in the table 180 x 140 mm table height over floor 700 mm Dcolip Tovuk Eno Dtsg ram surface 360 x 275 mm ram adjustment 60 mm power requirement 5,5 kW weight 3,8 t Dimensions (WxDxH) 1,9 x 1,7 x 2,4 m permitted for manual loading according to the German Safety Regulations (UVV) with hydraulic clutch/brake combination, mechanical overload protection in ram, manual stroke adjustment, manual ram adjustment, fix table, manual central lubrication, two-hand and foot operation can be inspected in running condition in our warehouse