Condition: good (used), Code: 0279 Brand: ALBERTI V. Model: PCC 33/18 Continuous cycle hot press for veneering, furniture, doors, panels, composite materials and various Njdpex I Nz Hjfx Alnscu Max working length 3300 mm Max working width 1800 mm Opening 200 mm N° 6 pistons diameter 100 mm Solid platens Diathermic oil heating Loading conveyor

Condition: excellent (used), Great deals on equipment in excellent condition: 2500/1250, 4-cylinder, 90 tons of pressure, electric heating plates. Nodpey U T Iwefx Alnocu

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation Ncjdpfxexdahye Alnsu CE mark Machine weight approx. 800 kg

Condition: excellent (used), total length: 3,500 mm, total width: 1,300 mm, overall weight: 7,000 kg, operating pressure: 300 bar, transport length: 4,350 mm, transport width: 1,600 mm, transport height: 2,350 mm, Simimpiantin Shelf Press for Veneering 3500×1300 Nsdpfsxxpgbjx Alnecu Shelf length: 3500 mm Shelf width: 1300 mm Two loads Press with 8 cylinders Shelves heated with water from central heating Max. working pressure: 300 bar Piston diameter: 80 mm Machine weight: 7000 kg Machine dimensions: 435×160×235 cm (H)

Condition: excellent (used), functionality: fully functional, type of input current: three-phase, pressing force: 90 t, total length: 7,700 mm, total width: 7,400 mm, total height: 2,350 mm, working width: 1,300 mm, working length: 3,000 mm, Throughfeed press for laminated panels ITALPRESSE PL/9 Shelf length: 3000 mm Shelf width: 1300 mm Number of vertical cylinders: 6 Vertical cylinder pressure: 90 t Vertical cylinder diameter: 70 mm Number of horizontal cylinders: 6 Shelf heating using a high-frequency generator The line consists of: – Material feed section – Glue application section – Material loading section Nedpfx Alexy Rm Esnocu – PL/9 press – Output table for material CE certificate Line dimensions: 740x770x235 cm (H) Weight: approx. 8000 kg

Condition: excellent (used), Self-loading press for gluing Orma LS/ECO/CA 30/13 Ncsdpfov Nhx Usx Alneu Working length 3000mm Working width 1300mm Automatic material loading Glue application system Shelves heated with oil to 130C Top pressure force 57t Side pressure force 9t Year of production 2001 CE certificate

Condition: excellent (used), Self-loading press for gluing Orma Macchine Ncedpfx Alevq Rcxsnsu Working length 2500mm Working width 1200mm Automatic material loading Side material clamps

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Self-loading press for laminated wood Steton P111 3000×1300 Working length: 3000 mm Working width: 1300 mm Automatic material loading Shelves heated by oil Diameter of vertical pistons: 70 mm Diameter of horizontal pistons: 50 mm Year of manufacture: 2006 Ncjdpfx Aloyuah Ajneu Total power: 24.5 kW CE certificate

Condition: excellent (used), Hydraulic assembly press Italprasse Program/30 for door and window joinery The Italpresse Program/30 machine is a hydraulic vertical press designed for precise assembly and gluing of wooden elements, such as window and door frames and furniture bodies. Thanks to its design, it allows for precise fitting and permanent connection of components, which is crucial in the production of door and furniture joinery. Technical specifications •Maximum working dimensions: 3000 × 1700 mm •Stroke of vertical cylinders: 800 mm •Stroke of horizontal cylinders: 1200 mm •Adjustable lower beam: can be set in three positions •Hydraulic cylinders: •2 vertical (Ø 100/60 mm) •2 horizontal for setting frames (Ø 50/35 mm) •Power of hydraulic unit: 2.2 kW •Overall dimensions: 3600 × 1000 × 2650 mm •Weight: approx. 1200 kg Application Italpresse Program/30 is ideal for: •Gluing and assembling window and door frames •Assembling furniture bodies •Assembling wooden panels and other construction joinery elements Nsdpfx Aowkf Stjlnecu

Condition: used, Year of construction: 2003, Working height: 2300 mm, Working width: 3500 mm, Motor: 1.5 kW, 3 pressure cylinders from above, 2 from the side, Pressure per cylinder: 3000 kg, Cylinder stroke: up to 200 mm, Hydraulics: 10-150 bar, Space required: 3950 x 900 x 2550 mm, Weight: 670 kg Storage location: Nattheim Nedpfx Aovvkmbelnjcu

Condition: used, Year of construction: 1992, Dimensions: 5700 x 1300 x 2400 mm Nsdpsvvkl Djfx Alnscu Storage location: Nattheim

Condition: used, Year of construction: 2003, machine/vehicle number: 0-306-04-2737, working width: 800 mm, conveyor belt length: 4,800 mm, feed rate X-axis: 37 m/min, working height: 1,400 mm, working length: 2,300 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be collected between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Nsdey Uwmqspfx Alnscu Workpiece width max.: 800 mm Workpiece length max.: 2,300 mm Workpiece height max.: 1,400 mm Feed rate max.: 37 m/min MACHINE DETAILS Machine length: 4,800 mm EQUIPMENT Infeed conveyor Outfeed conveyor The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8536

Condition: used, Year of construction: 2002, machine/vehicle number: 0-306-04-1262, working width: 600 mm, conveyor belt length: 3,000 mm, feed rate X-axis: 40 m/min, working height: 1,300 mm, working length: 2,500 mm, No minimum price – guaranteed sale to the highest bidder! The machine must be picked up between June 10, 2026, and June 30, 2026! TECHNICAL DETAILS Workpiece width max.: 600 mm Workpiece length max.: 2,500 mm Workpiece height max.: 1,300 mm Workpiece width min.: 120 mm Nodpfoy Uv Iyjx Alnscu Workpiece length min.: 300 mm Workpiece height min.: 300 mm Feed rate max.: 40 m/min Conveyor belt length: 3,000 mm MACHINE DETAILS Control system: NC 16 EQUIPMENT Unloading conveyor belt CE marking The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at its destination. External reference: 8535

Condition: new, Wood briquetting press Amis ABP 60 L -Exhibition machine- ----- Technical data ----- Briquette Ø: 60 mm, Hydraulic unit 3 kW: 140 bar, Voltage: 400 V, frequency: 50 Hz, Fuse protection: 16 A, Capacity approx.: 20-35 kg/h, Weight approx.: 300 kg Nedeu R Sxxepfx Alnjcu - Easy handling - Hydraulic control - Briquette diameter 60 mm - Briquette length adjustable as required (max. 60 mm) - Motor equipped with motor protection switch and emergency stop - No electronic components such as regulators, sensors and sensors or complicated controls - Large storage container - Tempered briquette tongs - Replaceable press bar - Pressing without the addition of additives - Thanks to the pre-compressor, even voluminous chips can also be processed - No adjustment work or pressure monitoring of the pressure necessary - New exhibition machine -

Condition: used, Year of construction: 1995, Technical details: punching pressure: 25 (250kN) t pass through width: 1800 (1660 nutzbar) mm daylight between the columns: max./min.: 155 / 25 mm stroke: Stanzhub: 130 mm total power requirement: 5,0 kW weight of the machine ca.: 2,0 t Dimensions (LxWxH): 2,3 x 1,0 x 2,2 m Njdpfx Aeu Szfuslnjcu Hydraulic trolley beam punch hydrl. pressure 250 bar Punching table area = 1830 x 500 mm Punching trolley/plate = 500 x 500 mm; travel speed = 800 mm/sec.; punching stroke = 63 mm/s, forward/return 125/125 mm/sec. Operation via control panel and pressure switch/control lever Equipment: 2x feed rollersØ 120 x 1630mm pneumatic close/open *

Year of construction: 1989, condition: used, Technical details: table length: - mm table width: - mm table load: - t total power requirement: - kw weight of the machine ca.: 8,0 t dimension working table: ca.4,5x3,1x1,2 m TRANSFER TABLE - TRANSFER TROLLEY - TOOL CHANGING SYSTEM Possible application: for press tools/devices as interchangeable trolleys in press lines Ncjdpfeu N D R Djx Alnju *

Condition: excellent (used), For sale: Hofer press in good working condition. Njdpfxjx Rrw Nj Alnscu

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, power: 75 kW (101.97 HP), For sale: fully operational pellet production line. Ncsdpfjw Ry U Isx Alnsu

Condition: excellent (used), total length: 3,000 mm, total width: 1,500 mm, Panel press in very good working condition + Grecon finger jointing Ncjdpfx Alst Uduxjneu

Year of construction: 2014, operating hours: 1,000 h, condition: like new (used), functionality: fully functional, The KraussMaffei polyurethane injection presses are designed specifically for high-volume off-site timber frame production. With large 12.5 m × 3.3 m platen capacity and up to 260-ton clamping force, they allow full wall panels to be injected and in a single operation—delivering consistent insulation, structural stability, and repeatable quality. Njdpfx Asyrh Ifslnjcu Integrated high-pressure metering and mixing systems ensure precise polyurethane dosing, while automated conveyors and positioning systems streamline panel loading and alignment. The result is faster cycle times, reduced labour, and factory-controlled insulation performance—making large-scale offsite timber frame manufacturing more efficient, predictable, and scalable. In short: Factory precision. Faster panel production. Consistent injected insulation for modern timber construction.

Condition: good (used), I sell a pneumatic press. Ncjdpfx Aljun U Uijnsu

Condition: new, Year of construction: 2025, functionality: fully functional, ACTION M frame press Press for any kind of window system: windows, slatted shutters, shutters and solid wood doors. Max working dimensions L x H 3500x2500 mm Min working dimensions L x H 250x375 mm Max vertical/horizontal thrust 7,4/2 ton Working height 480/1050 mm Hydraulic pump power 2.1 kW MACHINE COMPOSITION: ACTION M ACTION M FRAME PRESS num 1 109831 Normative CE per SM 1 R00494 action m 35-25 1 930731 Volt 400 EU 1 931201 Frequency 50 Hz 1 530074 PVC-coated beams working surfaces 1 Nedewh T Dljpfx Alnocu 530075 Intermediate manual crossbeam complete of piston and counter-stop 1 530076 Hydraulic system for low pressure working 1 530077 Equipment for trapezoidal products with oscillating head to adapt to the different corners of the windows system 1

Condition: used, functionality: fully functional, Screw-type electric shelving press ITALPRESSE 2500x1200 mm Specifications: • Condition - used • Manufacturer - ITALPRESSE • Shelves with dimensions 2500 x 1200 mm • Max. clearance between shelves 500 mm Ncsdjza If Tspfx Alneu • Straight, clean shelves, without dents • 2 screws with a diameter of 50 mm • Drive motor with a power of 0.75 kW • Original paint • Overall dimensions 285 x 120 x 160 cm (L x W x H) Additional information: • The machine is in good technical condition, ready for immediate use • The photos shown illustrate the actual condition of the item for sale • Possibility to switch on and inspect the device on site • Free training on machine operation (at the company's premises) • The price stated in the auction does not include VAT and transport costs Financing and transport: • We arrange transport using the MDD fleet, courier companies or external carriers • We offer financial support in the form of leasing or a leasing loan

Condition: excellent (used), Throughfeed press 3000 mm Nsdpjx Apxlefx Alnjcu 14 top cylinders 6 side cylinders Water heating with heating elements in the plate CE marking Year of manufacture: 1996

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Water heating with heating elements in the plate Ncsdoza Duwopfx Alnju CE marking Year of manufacture: 1996