Used pneumatic presses for sale (35)

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Table height: 1060 mm Installation height: 155 mm Bodpfxstrpiio Amreln - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: good (used), Manufacturer: unknown Type press: P 14 (?) Bljdpfx Amsrt Immoron Type: Table mounting press Dimensions: 150 x 220 x 750 mm Table dimensions: 1,500 x 700 x 820 mm Weight: approx. 80 kg

Condition: excellent (used), Year of manufacture: 2007 The set includes: 1. Pneumatic press Manufacturer: Schmidt Type: 24 Pressing force: 9 kN Two-hand control (two-hand release) 2. Strip guide for stamping / embossing Manufacturer: SAEP Type: HSG 3. Control system Manufacturer: Siemens Type: Simatic Panel 4. Additional equipment Bjdex Eiuxepfx Amrsln Magnifying lamp Worktable Ergonomic safety work chair

Condition: used, Table size: 660 x 450 mm Bedsq U Rbfjpfx Amreln Stroke length: 520 mm

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Very good condition Bledsu D Tz Uepfx Amron 3 pieces available, price per piece

Condition: new, Year of construction: 2025, pressure 3,3 bei 6bar t dayligth 250 mm Bodpfx Ajy Umf Aomreln stroke 70 mm work stroke 10 mm table surface area 220x190 mm throat 150 mm weight of the machine ca. 350 kg

Condition: used, Pneumatic press, compressed air press BOSCH Type Manufacturer’s No. Year of manufacture 1980 Pressing force: 18 kN = 1.8 tons at 5 bar 15 kN = 1.5 tons at 4 bar 12 kN = 1.2 tons at 3 bar 8 kN = 0.8 tons at 2 bar 6 kN = 0.6 tons at 1.8 bar Overhang: 100 mm Ram stroke: 70 mm Table surface: 245 x 200 Ram surface: Ø 45 mm Maximum installation height: 235 mm Arbor hole: Ø 20 mm with clamping screw Bedpfeh U Dtujx Amroln Compressed air requirement: 5 bar - Pressing force can be continuously adjusted via a pressure regulator - Pneumatic cylinder with ram, height adjustable by 90 mm - Pneumatic two-hand operation - Mounted on a metal frame with wooden plates Space requirement L x W x H: 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight with table frame: 140 kg In good condition

Condition: good (used), Year of construction: 1999, Pneumatic press, manufacturer: SCHMIDT, type: ZHS-2/22, year of manufacture: 1999. Two-hand operation. UVV certification valid until 2023. Blodpoiduvcefx Amrsn

Condition: new, pressure 4,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology Bledpfxjfv Av Sj Amren • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Working height from to 95 - 240 mm Bedpfxjfv Awas Amrsln table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm