5
power capacity 1,5 kW
feed pressure 11 bar
liter capacity 160 l
weight of the machine ca. 0,15 t
dimensions of the machine ca. 1,5x0,5x0,8 m
Bel3ztwb
380 V, 50 Hz with plug and cable
colour: light grey
2 cylinder, boiler 90 l
compressor has been checked in our workshop, electr. testing report included!
8
Description: Huber Rotamat RO1 as fine screen discharge with channel and EX-protection.
With spray nozzles and automatic press zone flushing.
Chycpwty
The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screened material.
Range of application:- Waste water treatment plants (municipal and industrial)
-process and partial flows in industry
The machine had its last use in a municipal sewage treatment plant, a washing press and another screen RO 1 ...
5
Numbers of cross transfers:22 Stck.
The antinoize bars used by Kaltenbach are manufactured by RK Technology and are used in plants in the steel trade and steel construction. The antinoize bars prevent squeaking of the profiles during transverse feeding.
B7cn7ppb22
When steel profiles are conveyed in transverse direction, considerable unpleasant noise is possible when steel is shifted on steel.
By using Antinoize Lists, you significantly reduce the noise exposure for your plant employees.
6
Product condition: New from old Stock
Case: Paint is slightly damaged
Connection: G 1/4
Guarantee in months: 12
OutsideØ: 212 mm
Scope of delivery: with filter insert und Umschaltventil
Item No.: FT-B88
B9ajllcc7x
9
1 high frequency high voltage generator for sale.
Data: Radio frequency high voltage generator.
Water cooling system, pump not included.
DC Input: 12KV-2A, Max 12kW
RF Output CW: max 12 kW
RF Output Pulse: max 100kW, 7KV / 14A, T.P max 10ms
Operating frequency: 13.5 MHz
Cooling: minimum 50l / min, 4 bar
Size: 180 x 70 x 170 cm (measured with wheels)
Main parts:
2pcs Eimac 3CW30,000H7, 06980 water cooled power triode, 6.3V, 160A, 45kW, 110MHz CLICK HERE
2pcs Com...
5
- Heidenhain TNC 620 controller
- Rigid tapping system
- MPG Remote Handwheel
- Spindle 10000 rpm, ISO50
- Power 24 kW
- X/Y/Z travel: 2500/900/900 mm
- Table load: 3000 kg
- Coolant through spindle - CTS at 20 Bars
- Spindle air blast
- Spindle coolant nozzles
- Spindle coolant system
- Data transmission USB + Fast Ethernet
- Oil skimmer
- ARM ATC 40 position
- Telescopic covers for all guideways X,Y,Z, axis
- Air / Water wash guns for cleaning
- Chip Flushing on Machine Base
- Integrated ...
10
We manufacture and provide drums for mobile and stationary screeners, for :
- Eggersmann T 40 - Terra Select T 4
- EggersmannT 50 - Terra Select T 5
- Eggersmann T 55 - Terra Select T 6
Biugfnwnhe
- Eggersmann T 60 - Terra Select T 7
- Eggersmann T 70
- Eggersmann T 80
also Doppstadt, Pronar, Komptech , Mc Closkey...
Bespoke maded drums are our specjality.
In case of any question, please contact me by mobile or e-mail.
10
Description: Pump station with Witte pump and SEW gear motor in frame
e.g. for lubrication of turbines
Type: CHEM 46.3-4
Manufacturer: Witte Pumps & technology GmbH
Year of construction: 2012
Documentation: yes
Storage location: Warburg warehouse
Status: unused / unused
Capacity: 33.4 l/min
pressure: 3 bar
revolutions: 722
Ccflrdda
Material: stainless steel (1.4571 - pump head)
Motor: SEW-Eurodrive RXF57 DRE100LC4/TF
Power: 2.2 kW
Frequency: 50 Hz
Revolutions: 1760 1/min
Protectio...
1
Pellet mill (granules) | Press Pellet "PellTech" series model: GRD-0.5 Ring Dies
Technical specifications:
Pellet productivity up to: 250 kg / hour depending on the raw material.
Productivity of feed granules up to: 250 - 400 kg / hour depending on the raw material.
Diameter of pellets - granules: 4 - 14 mm
Inner diameter ring dies: 270 mm
Adjustable pellet length: 10 - 60 mm
Main Motor - 1 X 22kW
Dosing motor - 2 X 3 kW
Total installed power - 25 kW
Three-phase current - 400V, coil voltage 24V ...
6
Guarantee in months: 12
Manufacturer: Adept Technology
Case: Very good, slight scratches
B89xhdaze3
Product condition: Used from old Stock
Item No.: 10338-51000
9
1 x Key Technology digital camera/laser sorter, precision sorter that manages the separation of products. Supplied with 1 x vibratory feeder.
Model - Key Technology
Date of manufacture - 2010.
Cakebzxubv
4
The MDS-1 Electric Motor Recycling Machine designed to accurate copper extraction from stator insert of electric motor with different types of diameter.
Description:
The machine use steel claws to extract copper from the stator shell during backward movement.
Stator fixed on special rollers mounted on lifted platform, a holder located in front of the machine keeps the stator from moving. Steel claws release copper when the operator pulls leaver backward.
The machine fitted on solid frame, equi...
14
Drum for Doppstadt screener SM 518 and SM 620 on stock.
CHECK AVAILABLE PERFORATIONS.
We manufacture and provide drums for mobile and stationary screeners, for :
- Doppstadt SM 414
- Doppstadt SM 518
- Doppstadt SM 618
- Doppstadt SM 620
- Doppstadt SM 718
Biqqxb0ibb
- Doppstadt SM 720
- Doppstadt SM 725
also Terra Select, Eggersmann, Pronar, Komptech , Mc Closkey...
Bespoke maded drums are our specjality.
In case of any question, please contact me by mobile or e-mail.
6
Description: Huber Rotamat RO2 as fine bar version and EX-protection.
With spray nozzles and automatic press zone rinsing.
The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings.
Range of application:- Waste water treatment plants (municipal and industrial)
-process and partial flows in industry
Bdtovogiqn
The machine was last used in a municipal sewage treatment plant.
Type: RO 2
Manufacturer: HUBER Technology
Year of construction: 2...
8
WATER TREATMENT PLANT CONSISTING OF WELLMATE WATER SOFTENING
& REVERSE OSMOSIS SYSTEM MERLIN RO-EASY 40
Equipment / Additional information:
V 230 // Hz 50 // A 2,4 // KW 0,55
Fk3fxtf
Permeate output at feed water temperature 15 ° C and 4 bar flow pressure: 40 I / h (incl. Pressure vessel 25 I)
Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST
1
Circuit board dimensions: 50x50-533x609mm, circuit board thickness: 0.5-4mm, max. circuit board weight: 3kg, length: 1351mm, width: 1110mm, height: 1892mm, weight: 970kg, including server and repair dongles.
Caboepyhje
5
Freeze-Dryer with 50kg/24h Condenser Capacity (max. 75kg)
- Process Visualization via Laptop & Custom Software
- Two-Stage Kompressor for Condenser Temperature of -75°C (-103°F)
- Shelf Temperature from -65°C to 110°C (-85°F to 230°F)
- Two-Stage Vacuum Pump Leybold Sogevac Neo 40D
- Pirani (Standard) & Capacitive Pressure Sensor
Radiative Panels: 13
Cxbhorbb
Shelf Measurements: 650 x 1060mm
Shelf Clearance / Distance: 50mm
Shelves: 12
Load Capacity: 24x GN 2/1 (530 x 650 x 20mm)
Total Drying ...
3
ZLOMIARZE Recycling Technology - LRK Recycling line
The Mini Line is a high quality set of devices designed for the recycling process. Shredding and separation are essentials in this business, that’s why Mills from TORNADO series was designed for rapid reaction on feeding materials with being in a chamber for short time. Suitable sieves placement and balanced cutting rotor RPM provide uniform material fraction.
Innovated implementation of water system with adjustable pressure in the Wet Separat...
14
We manufacture and provide drums for mobile and stationary screeners, for :
Pronar MPB 18.47
Pronar MPB 20.55
Pronar MPB 20.72
also Terra Select, Eggersmann, Doppstadt, Komptech , Mc Closkey...
Bespoke maded drums are our specjality.
In case of any question, please contact me by mobile or e-mail.
Eibk7k0hm
15
Description: Huber Rotamat RO2 as fine screen design and EX-protection with stainless steel pan.
Separation of solids from waste water, compaction and washing of the screenings.
Range of application: Waste water treatment plants, recycling industry
Type: Rotamat RO2
Manufacturer: HUBER Technology
Year of construction: 2001
Documentation: yes
Status: used / second hand
-: Sieve screen (RO2 600/5)
gap width: 5 mm
length: 3420 mm (incl. motor)
diameter: 600 mm (screen drum)
material: stai...
9
Manual and CNC measurements!
Easy-to-use, manual and motor-assisted coordinate measuring machine with software operating panel. Due to its data, this machine is ideally suited for workshop use as well as for use in the measuring laboratory and also for serial measurements.
Technical data
Measuring range (X/Y/Z) 454 440x500x410 mm
Measuring uncertainty according to DIN EN ISO10360-2
Measurement uncertainty (X/Y/Z) 2.5+ 3.9L/1000µm
Probing deviation MPEp 3 µm
Max. Table load (454) 227 kg
Total wei...
6
MODEL YDN-100
MATERIÁL HDPE / LDPE / LLDPE / PP / EVA / ABS / PS
VÝKON (performance)
kg/godz (hod) PP = 330
HDPE =360
Cfuyhjr
LDPE =380
INSTALOVANÝ PŘÍKON( INSTALLED POWER) 218 kW
ZHUTŃOVÁNÍ (COMPACTION)
Průměr bubnu (Drum diameter) 800 mm
Výkon motoru (Engine power) 54 kW
Počet rotačních nožů (Number of rotary knives) 4
Počet stacionárních nožů (Number of stationary knives) 9
EXTRUDER
Type Z odplynovánim (From degassing)
Průměr šneku (Screw diameter) 100 mm
L / D 30/1...
7
Mechanical briquette press for straw and sawdust briquettes "BriqTech" series model: BT-070-800Max
Principle of the press with mechanical system with piston actuation - the raw material is pressed without adhesives or binders, forming briquettes (solid fuel) with a density up to 1450 kg / m3
Technical specifications:
Productivity up to: 600 - 800 kg / hour depending on the raw material
Lighter diameter: 70-75 mm vegetable waste, sawdust (80-85 mm straw)
Lighter length: 100-300 mm
The main engine...
2
The compact vibratory table with dual magnetic separation is designed for precise separation of the smallest low magnetic particles. The built-in magnetic belt separator (SM-500) removes all thicker fractions. An automatic magnetic drum is used at the end of the vibratory table to improve accuracy.
Made of strong permanent magnets with suitable arrangement. The result is that the appliance separates the fraction, even of 1 mm low ferromagnetic acid-resistant steel.
Application :
✔ Cable/wire mi...
3
Speed: 50-200 products/min, sleeve thickness: 30-50μm, max. bottle height: 360mm, max. steam consumption: 150kg/h, tunnel length: 2100mm, with conveyor and buffer table.
Ced8p8os
10
Description: Pump station with Witte pump and SEW gear motor in frame
e.g. for lubrication of turbines
Type: CHEM 46.3-4
Manufacturer: Witte Pumps & technology GmbH
Year of construction: 2012
Documentation: yes
Storage location: Warburg warehouse
Csr3oypq
Status: unused / unused
Capacity: 33.4 l/min
pressure: 3 bar
revolutions: 722
Material: stainless steel (1.4571 - pump head)
Motor: SEW-Eurodrive RXF57 DRE100LC4/TF
Power: 2.2 kW
Frequency: 50 Hz
Revolutions: 1760 1/min
Protectio...
14
LCT bio. X A 100 Biologically based small parts cleaner including 80 liters LCT Bio Liquid cleaning fluid
Bag filter
Magnet for separating metal chips
Washable prefilter
Cleaning temperature is a comfortable 41 ° C
Environmentally friendly
Long service life of the cleaner
Nvl9j
little space required
additional options are possible:
Filter housing with washable nylon filter
Insert sheet made of V2A to protect the plastic surface
Trolley
12
Very well maintained and directly usable Rotaflex rotary transfer machine.
The machine can be adapted to the customer's exact needs directly from the factory.
Very attractive price.
You can see the current assignment of the machining modules in the photos.
14 machining units
Owqwd
3-axis CNC unit, stroke x / y / z = 60/120/150 mm,
double spindle with tool holder HSK-C32,
spindle drive with servo motor, power 1.1 kW / 100% ED,
speed max. 10.000 resp. 20.000 rpm,
spindle position 2 x horizontal...
2
Straw pelletizing line 400-700 kg/hour, straw pellets 8 mm, output pellet density up to 1350 kg/m.cub
The complete straw pelletizing line contains:
- Complex for chopping rectangular or round bales with additional food belt model: CGS-1
- Raw material homogenization hopper - Volume 3 m.cubes, overload sensor, feed auger
- Minicomplex pellet press model: GFD-0.7
- Semi-automated bag dosing system with automated bag bagging, bag gluing with foot pedal, productivity 300 bags / hour, bag dosing adju...
6
ZŁOMIARZE Recycling Technology MCW 52/76 Shredder
The MCW series quad shaft shredder is based on many years of experience in the plastics and scrap industry. MCW Shredder is a highly reliable, universal pre-shredder for shredding a wide range of materials such as plastics, materials, rubber, wires, electronic scrap, post-production waste as well as slight magnetic materials.
Types of MCW Shredders:
MCW-52
Technical Specification:
• Motor output – 22 kW
• Cutting Chamber – 510 × 760 mm
• Perfo...
15
Used SPX Flow Technology APV model R15-18.56 stainless steel homogeniser. Has three piece valve housing. Maximum capacity 400 l/h with maximum pressure 800 bar. Mounted on stainless steel mobile skid. Unit includes process control skid.
Bwzywjum
** Process Equipment Ltd buys and sells high quality used and refurbished process equipment worldwide. We have equipment in stock, immediately available, and can save you considerable time and money on your process equipment. Global Support is available...
15
Description: Huber Rotamat RO1 as fine screen with splash water connection and control cabinet.
The intended use of the RO1 is the separation of solids from waste water, compaction and washing of the screened material.
The screenings are discharged into the centrally arranged screw conveyor when the scraper arm stops in the 12 o'clock position.
Type: FR RO 1
Manufacturer: HUBER Technology
Year of manufacture: 1992
Documentation:
Status: used - satisfactory
Read off operating hours: 3977 h
...
Pclass = working area X 1250mm x Y 1250mm x Z 25mm
Glspe3388
skyCUBE P laser processing center - the new Pclass, more productive with a larger work surface than laser cutting machine for your metals
Laser processing simple and high-precision - laser engraving, cutting at high speed and quality
7
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and more feed ...
2
Briquette straw briquetting line 600-800 kg / hour,
density of straw briquettes at the outlet up to 1250 kg / m.cubes,
briquette diameter 72-74mm
Oyrcx
The complete briquette briquettes line contains:
"BriqTech" series mechanical briquetting press model: BT-070-800Max + Radiator and fan oil cooling system and oil heating
+ Lighter head cooling system that will keep the temperature constant
+ Hydraulic system for tightening the briquette press head
+ Dust extractor
Raw material homogenization hop...
2
The product allows you to quickly recover the color metal that is isolated during an environmentally friendly process.
Solid Polish design ensures a very long life. We have every service part for your product.
• Cutting – top
Cakdstlvec
• Steel wire extraction from aluminum braid (after installing additional attachment)
• Two drive system up-down
• Set of cut rollers 20-50 mm
• Set of cut rollers 50-100 mm
• Set of crush rollers
• Working voltage – 380 V
• Motor power – 2,25 kW
• Weight – 277 k...
4
The Primera FX1200 Digital Finshing System Includes the following components:
unwind/rewind stations,
Ccurzm0t
laminating station,
digital die cut station, slitting station,
touch screen controls.
The FX1200 Digital Finishing System from Primera Technology, Inc. gives you a fast, simple and inexpensive way to finish labels for any project in any industry. Label finishing was once a complex and expensive process, but the FX1200 has changed the rules of the game by providing a reliable, all-in-on...
8
Description: Huber Rotamat RO1 as fine bar version and EX-protection.
With spray nozzles and automatic press zone rinsing.
The intended use of the RO1 is the separation of solids from wastewater, compaction and washing of the screenings.
Range of application:- Waste water treatment plants (municipal and industrial)
-process and partial flows in industry
The machine had its last application in a municipal sewage treatment plant, a washing press and a further screen RO 1 which were connected toget...
The laser processing center skyCUBE M the new standard in laser material processing!
Cwu3lwvy
Laser for tool making practical and safe !!
with IPG fiber laser
6
Customer benefits of a technica centre grinding machine:
More profit in the grinding process due to lower production costs & sustainable process reliability
High precision in the grinding result due to a robust and precise machine design
High productivity of the machine due to a short grinding process and shortened production times for the subsequent processes
An optimised grinding process thanks to the special cross-grinding, as less thermal stress is generated from the workpiece and more feed ...
1
Complex Shredder Straw Bales CGS-1 + Hammer mill model: H-119 / 7SN
Technical specifications:
Productivity up to 600-1500 kg / hour depending on the raw material
Straw bale diameter max 1.8 meters
Cylindrical, rectangular straw bales
Bale density up to 120 kg / m.cub
Humidity of the raw material max 25%
Number of chopping knives 361 pcs
Number of knives grind hammers 14 pcs
Number of mill hammers 60 pcs
The size of the raw material chopped at the outlet 3 mm - 10 mm, depending on the sieve
Main ...