Used Air Tapping Machine for sale (84,822)

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1522, We are offering this well-maintained H&H AI 008 hot air taping machine, manufactured in 2015. Manufacturer: H&H Model: AI 008 Year of manufacture: 2015 Condition: good Category ID: 677 Type ID: 2467 Machine type: Hot air taping machine Podpfjzdy Rbsx Afuegr If you have any questions or require further information, please do not hesitate to send us a message or call us. The machine is located at our production facility in Mönchengladbach and can be inspected and tested there during normal business hours. It was in use in our production facility until recently. It is perfectly suited for waterproof seam sealing.

Condition: excellent (used), Year of construction: 2021, XYZ RMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK RMX Control YOM 2021 Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Pgsdpfxox D Tbmo Afujr Travel: X – 787mm Y – 508mm Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar YOM 2021 For Sale with Jet Machinery Ltd Jet Machinery Stock Number: #78900 Machine Serial Number: RM310097 £35,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2011, Industrial furnace for tempering flat glass, used in construction, for door and window glass, furniture glass, decorative glass, and certain types of coated glass. Manufacturer: SHANGHAI REFINE MACHINERY Type: RGT A-1530 Maximum glass size: 1500 x 3000 mm Minimum glass size: approx. 200 x 300 mm Glass thickness: 5-19 mm Psdezh Uyrspfx Afusgr Output for 5 mm glass: approx. 16-18 cycles/hour Installed power: 500 kVA Compressed air pressure: >0.8 MPa Year of manufacture: 2011 Technical condition: used machine, requires technical inspection, condition as shown in the photos.

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Pgedpfx Asurulpefuer Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: used, thread dia. M3 - M12 mm 400 U/min. 25 Nm air pressure 6 - 8 bar working area Radius 1000 mm weight of the machine ca. 12 kg Demonstration machine! Pneumatically driven tapping machine for M3 - M12 thread with: - stable and flexible working arm. Pgodefg U Smspfx Afujr - 6 pcs. Quick-change chuck with slip clutch. Documentation in English !! optional: - Clamping table with T-slots clamping surface 900 x 600mm

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, automatic traversing table BAUMANN BSB 2L, serial no. 212.880, size 64x92 cm air table, air-blowing roller, Pgjdszwdi Iepfx Afujr maximum layer height: 160 mm Power: 2 kW 400V - 50Hz - 5.5A Net weight: 550 kg

Condition: good (used), - Pneumatic Motor GAMOR Pgjdpfx Aezvnhfefujr - Reinforced parallelogram structure made of hard aluminum - Table mounting column - Capacity: M2-M8 - Speed: 700 RPM - Working radius max: 1900 mm – min: 200 mm - Working air pressure: max 7 bar – 840 l/min - Weight: 18 kg The welding table is not included in the sale (as shown in the pictures), only the machine, which can be mounted again on a table or similar base. Transport and loading can be organized Europe-wide upon request and at additional cost. Prices plus VAT. Inspection possible by appointment. Contact us – our team looks forward to assisting you. Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, AND MORE. Are you looking for a high-quality yet affordable machine for your production? Or do you want to sell yours? For further information or contact options, please reach us via the contact form.

Year of construction: 1985, condition: repair required (used), Extraction machine for taps -Handover in the current condition as seen Pgedpfxsi Huvhj Afujr -Current consumption: too high, machine as spare parts carrier -Manufacturer: Electro ARC, extraction machine for taps or similar tools -Clamping table: 660 x 460 mm -Outreach: 250 to 480 mm -Columns Ø: 70 mm -Dimensions: 930/780/H2045 mm -Weight: 402 kg

Year of construction: 2010, condition: good (used), machine/vehicle number: 8298-5 + 1357075, Offer 20142 Psdpfx Afopahn Houegr Technical data: - Tapping capacity up to approx. M 16 - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Condition: new, thread dia. M3 - M16 metrisch Podpfot Eabisx Afuegr 312 U/min. working area max. 1100 mm engine output 0,6 kW weight 30 kg dimensions 700 x 600 x 200 mm Electric tapping machines for M3 - M16 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB

Condition: good (used), Year of construction: 2019, machine/vehicle number: 6284, Offer 24033 Technical data: - Tapping capacity M 3 - M 24 - Working range (swivel radius) 1800 mm - Infinitely variable speed adjustment up to 475 rpm Pedport Unwofx Afujgr - Digital depth adjustment - Torque 140 Nm - Quick-change tool holder size 2 diam.31 - various inserts for quick-change tool holder - Table surface 1200 x 990 mm - Table height 830 mm - Space requirement approx. W 1250 x H 2000 x D 1000 mm - Weight approx. 300 kg

Condition: ready for operation (used), Global HS-8307 Hot air welding machine Automatic strip cutter You are welcome to come by for a viewing. We can also arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Podpfxovaxfae Afuogr Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/7/CAR + RA1 SCOPE OF SUPPLY 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Single collecting cradle RA1, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. 4 Main electrical cabinet and operator control panel 5 Safety barriers around the machine & photelectric barriers & emergency line. Note: Safety barriers were installed by owner to have the machine under “safety conformity” TECHNICAL SPECIFICATIONS Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Spain Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Total installed power: Aprox. 21kW – 50Amp Manufacturer: MAIR Model: TRA 3000/7/7/CAR +RA1 Yearly maintenance: made by MAIR Max. input tube length: 7000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-50x50 mm (see note) Rectangular tubes (HxW): 12x16-60x40 mm (see note) Thickness Min-Max.: 0.8 - 4.0 mm (depending on yield) Cutting lengths: 330-6900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 7 Motors power: 2.2 kW Cutting disc diameter: 300 mm Voltage: 380 / 50 V/HZ, 3 phases Compressed air: It must be supplied filtered and lubricated 6 bar Pgodeymax Ejpfx Afujr Total installed power: Aprox. 21kW – 50Amp

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Pgsdpfx Ajyzxgfjfusr Manufacturer – Giemme Thermo Packaging Machinery S.r.l. Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Year of construction: 2017, operating hours: 100 h, condition: excellent (used), functionality: fully functional, Equipment: CE marking, The SMRE machine is used for hot air welding of PVC fabrics and synthetic materials. The machine is in like-new condition and has been used very little. The working width is 800 cm. Pedpfxszkqm Hj Afusgr

Condition: good (used), Year of construction: 2014, machine/vehicle number: 5890, Offer 25118 Technical specifications: - Tapping capacity approx. M 3 - M 8 - Working range (swivel radius) approx. 1800 mm - Multi-position head - Speeds 8 - 700 rpm - Quick-change tool holder size 1, diameter 19 mm Pgodpfxewmnhps Afuer - Pneumatic connection 6 - 8 bar - Table base H 900 mm - Space required approx. W 1000 x H 2000 x D 1000 mm - Weight approx. 100 kg

Condition: excellent (used), XYZ SMX 3500 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 5HP – Programmable 40 – 5000rpm 2 Ranges 40 – 600 & 300 – 5000rpm ISO40 Quill Dia 105mm Year of Manufacture 2008 Table: 1370 x 355mm 4 0ff T Slots T Slot size 15.9mm Max load 600kgs Travel: X – 787mm Y – 508mm Psdpfx Ajzuxn Tofujgr Head Vertical (Z) – 500mm Quill (Z) 127mm Dims without travel – 1905 x 2069 x 2225mm Dim with travel – 2758 x 2869 x 2490mm Weight 2430Kgs Power Requirements 22A Air Requirements 6bar For sale with Jet Machinery Ltd Jet Machinery Stock No: #79245 Machine Serial Number: 10731 Cost: £17,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 2000, condition: good (used), Offer 20158 Technical data: - Tapping capacity up to approx. M 16 Pgedpfx Ajpvkm Tsfuer - Tapping depth approx. 75 mm - Drill feed down + up infinitely variable - throat depth 90 mm - Spindle speed up to 290 rpm - Pneumatic connection with pressure reducer 6 bar - Pneumatic foot switch - drive 400 V / 0,75 kW - Space requirement approx. W 700 x H 2250 x D 800 mm - Weight approx. 150 kg

Year of construction: 2014, condition: good (used), High-quality Airpad machine from a renowned manufacturer. Suitable for producing custom-designed, air-filled protective and cushioning elements made of PA and PE film, as well as paper-based bubble wrap. Typically, four air cushions are produced per working cycle. Various formats can be produced. For this purpose, 10 programs are available to store multiple parameters. By calling up the corresponding program on the display, air cushions can be produced with lengths ranging from 4 cm to 16 cm and individually defined fill levels. The resulting air cushion strips are then wound into rolls by a motorized device. When the roll is full, the machine automatically shuts down. The finished roll can then be manually removed and used as packaging material. The machine can be moved by pushing it on its rollers and secured in place using brakes. The machine can be demonstrated while powered on. Podpfx Ajkkcqqofuegr

Condition: good (used), Drilling capacity: up to 10 mm Spindle mount: drill chuck Speed range: Pulley diameters: Motor side: 38; 48; 66; 78 mm Spindle side: 90; 104; 120; 133 mm Motor speed: 800 rpm Stroke: 100 mm Overhang: 300 mm Table: 400 x 400 mm Pedeh Hrkiopfx Afusgr Distance table – drill chuck max: 580 mm Distance table – drill chuck min: 130 mm Table: 400 x 400 mm Footprint: 750 x 480 mm Total power consumption: 0.4 kW Accessories/equipment: drill chuck Condition: good Weight: 170 kg Dimensions: 750 x 480 x 1,450 mm

Condition: new, thread dia. M5 - M24 metrisch max. 200 U/min. working area max. 1200 mm engine output 1,2 kW weight 25 kg dimensions 740 x 800 x 400 mm Electric tapping machines for M5 - M24 threads, Angle adjustable. Quick-change chuck with slip clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of Main direction of rotation, thread selection. Documentation in English! Options: Clamping table with grooves Type: FL-WB Pgsdpsvblh Rsfx Afujr

Year of construction: 1991, condition: not inspected (used), functionality: unexamined, Robust column drill press, Thyssen Hüller Hille, type UG24 Pgodpfx Afszvyhdousr Year of manufacture: 1991 For industrial use Operating voltage: 380 V, 50 Hz Current consumption: 16 A Operating hours according to the hour meter: approx. 1,678.3 h Complete set of spur gears included.

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, machine/vehicle number: 8109/30, Drilling and Dowel Inserting Machine with PLC + Part Return | 8 heads For sale: a professional through-feed drilling and dowel inserting machine for the production of furniture components, particularly drawer sides. The machine is equipped with PLC control, automatic part return, and an expanded head arrangement (including rear heads), enabling the complete operation to be performed in a single pass—without re-feeding the workpiece. Technical Specifications: - Number of heads/motors: 8 - Head configuration: front/side/rear (double-sided machining in a single cycle) - Control: PLC - Part return: yes (closed production loop) - Maximum working width: 2000 mm - Power supply: 400 V - Pneumatics: yes - Year of manufacture: 1981 - Manufacturer: Gerhard Koch (Germany) - Condition: operational, in ongoing serial production Performance: Approx. 6,000 drawer sides per 8-hour shift Thanks to the rear heads, components that typically require two passes are processed in one, significantly reducing cycle times and increasing productivity. Applications: - Drawer sides - Cabinet components - Batch and repeat production - Automated production lines Key advantages: - Single pass processing instead of two - High repeatability - Stable, heavy-duty construction Pgedpsyzg Udjfx Afujr - Perfect for mass production - Proven German technology Location: Elbląg Please contact me for further information.

Condition: ready for operation (used), Wörner AGE 6 bench tapping machine Tapping machine throat depth: 130mm Thread depth: mechanically adjustable Two speeds Foot operation Manual and automatic operation possible. Space requirement: approx. 650mm x 350mm x 750mm ( L x W x H ) You are welcome to come by for a viewing. We are happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Psdpfx Ajukq I Dofuogr Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved

Condition: excellent (used), Year of construction: 1987, TOYOSK 0-PTMS fixed spindle pitch high speed 12-spindle tapping machine Year of manufacture: 1987 Speed ​​(3 stages): 850 / 1200 / 1700 rpm Speed ​​change: Mechanical (stepped stages) Spindles: 12pcs For precision mechanics, small holes / threads. Psdjwifd Hopfx Afuogr Application: Simultaneous preparation of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)