Used Pneumatic Press Stanze With Tools for sale (59,358)

Condition: new, Year of construction: 2025, functionality: fully functional, degree of automation: automatic, Pneumatic press for raw dried delicacies. Made completly of stailes steel. Powered by air- 6 bar Measurments: by client demands Hsdpfjwqcbfex Afijnu

Condition: excellent (used), Year of construction: 2021, Food Tools CP-1H half sheet product press Serial: 6341 2021, crumb pressing machine is designed to press and pack crumbs inot the bottom of a half sheet pan quickly and with consistent pressure, up to 360 products per hour, 280mm diameter press Hnjdpfxjrza Due Afiou

Condition: used, Year of construction: 2016, Column press Tox 4 MAG 008.288, year 2016. The machine can be inspected at any time. Hnjdjxn Rlkepfx Afiou

Condition: like new (used), Year of construction: 2007, functionality: fully functional, total height: 860 mm, pressing force: 1 t, overall weight: 105 kg, total width: 400 mm, table width: 200 mm, table length: 230 mm, type of input current: AC, air pressure: 6 bar, FCP-C 10KN pneumatic press machine for sale in several pieces manufacturer: FCP-C pressing force 1 ton Stroke: 75-100 (mm) Air pressure 0.2-0.5 MPa Open height 320 (mm). two-hand operation Hnedpfx Aev E Sazefieu table size: 200x230mm Shaft dimensions Bore diameter φ15H9 (mm) x depth 35 (mm). Speed ​​controller Low friction roller Rotation stop lever height: 880mm length: 360mm width:400mm weight: 105kg Many options (timing box with counter, load management device, etc.). ●The lowering speed of the press can be freely adjusted by the speed controller. ●Mechanical stop for bottom dead center adjustment. ●Inching operation valve for smooth forming. ●Air equipment is also standard.

Condition: excellent (used), For sale: Complete industrial pneumatic press in a workshop housing, ideal for punching, pressing, stamping, or other assembly processes. The set includes: • Pneumatic column press with a robust steel frame Hsdpfx Ajud Rddsfijnu • Control valve, cylinder, and pneumatic distribution • Integrated control panel with emergency stop switch • Steel worktable with adjustable side guides • Power cabinet, distribution board, and cable management • Mobile table with transport brake Drive: Pneumatic supply Control: Solenoid valves, start/stop buttons Power supply: 230 V (electric system integrated in the base) Technical condition: Very good. Used, fully functional set ready for immediate use in a production facility. Genuine industrial construction, not for amateur use.

Condition: good (used), functionality: fully functional, total height: 730 mm, throat depth: 90 mm, installation height: 120 mm, pressing force: 1 t, overall weight: 50 kg, total width: 300 mm, total length: 350 mm, table width: 100 mm, table length: 135 mm, stroke length: 12 mm, compressed air connection: 8 bar, air pressure: 8 bar, Technical data : power 15 kN max. nominal pressure at 8 bar power connection 220 volt . mounting , round 15 mm throat 90 mm ram stroke approx. 12 mm table approx. 100 x 135 mm . Max. Installation height 170 mm Plunger top Adjustment upper part approx. 100 mm . Width x depth approx. 0.3 x 0.35 m Hnodpfjxiw Uzox Afieu Height approx. 0,73 m Weight estimated approx. 50 kg . Maintenance unit Foot switch with pneumatic release (2-hand is not safe for manual insertion) Stroke counter . .. Ongoing purchase of German second-hand machines without NC or CNC controls

Condition: used, functionality: fully functional, Wicona Wicpro Wic Pro Operating pressure: 0.8 MPa Air consumption: 5 liters/stroke Stroke: 30 mm Weight: 70 kg Punching modules: Hnjdpfx Afsv I Skleisu 1x Station 1 2x Station 2 1x Station 3 2x Station 4/5 1x Station 6 4x Alcoa 1x Schüco 299 783 1x Schüco 283 492 1x Schüco 299 445 The four pneumatic hand punches (2x Wicona, 2x Schüco) can be purchased optionally at a reasonable price. #8169

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 901 S Pnömatik Alüminyum Köşe Presi Makinası, - Conforms to CE standards - Corner press machine designed for 90 degree joining of aluminum profiles - 2 top presses and blade movement is pneumatic - There is a mm ruler system for the height and advancement of the blades. - Centering miter wedge is automatic - Drain button available for fine adjustment - Pneumatic presses use 2 pedals to squeeze the profile - Profile surfaces are polyamide sheet to prevent damage - Side support arms available Hnsdpfxorbiv Aj Afisu

Condition: new, pressure 8,5 kN stroke 40 mm throat 95 mm Hedpsfv Awaefx Afijnu Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 27 Kg dimensions 160 x 230 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, throat depth: 100 mm, pressing force: 2 t, table width: 330 mm, table length: 350 mm, cylinder diameter: 28 mm, air pressure: 6 bar, For sale in new condition HYUNDAE HP-2000 2t PNEUMATIC PRESS Brand: HYUNDAE MACHINERY & ELECTRIC CO.,LTD Type: HP-2000 manufacturing of year: 2021 Max. pressing force: 2t Hedpfx Asvbfbwefisnu open height:300mm Bolster Size: 350x330mm Stroke length: 100mm Cylinder diameter: 28mm built on a press stand Two-handed operation Voltage: 110V Air Connecting Hose Diameter:12mm

Condition: excellent (used), functionality: fully functional, CATALOGUE NUMBER 7559 TECHNICAL DATA - loading fields 2 - manually adjustable side clamps 2x4pcs - vertical pneumatic clamps 2x4pcs - max length of glued elements 3300mm - max height of glued elements 1020mm Hnjdpov Dirxefx Afiju - max thickness of glued elements 100mm - dimensions length/width/height 4270x1600x2000mm - weight about 800kg ADVANTAGES - two working fields - gluing length 3300mm - pneumatic actuators - used press, very good condition Net price: PLN 10900 Net price: EUR 2570 depending on the price EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Solid pneumatic gluing press with perforated plate for flexible arrangement of the press cylinders. One cylinder without a pressure shoe. Hjdpfx Afoviwqmeionu pressing surface: approx. 2,800 x 1,000 mm Pressing surface: approx. 2,800 x 1,000 mm press cylinder: 6

Condition: used, Pneumohydraulic cylinder TOX Pressotechnik Hydro-pneumatic press, power pack Type: S 04.00.050.12 D No.: 208696.460 Year of manufacture approx. 2000 Pressure capacity: 4.0 tons at 10 bar Pressure capacity: 3.0 tons at 8 bar Pressure capacity: 2.6 tons at 7 bar Pressure capacity: 2.4 tons at 6 bar Pressure capacity: 2.0 ton. at 5 bar Pressure capacity: 1.6 ton. at 4 bar Pressure capacity: 1.2 tons at 3 bar Total stroke: 50 mm Power stroke: 12 mm Piston rod: Ø 30 mm Thread for piston rod: M22 x 2 mm Compressed air requirement: 3 to 10 bar - Electronic oil pressure switch with TOX digital display for force measurement, type 167282 - Height only power pack with piston rod = 610 mm - Height of power pack hydropneumatic cylinder only = 560 mm - Additional base plate 160 x 160 x 20 mm - Plunger plate: Ø 68 mm Space requirement L x W x H: 160 x 160 x 660 mm Weight: 21 kg Hnsdpfxeu D Tz Us Afieu Very good condition 3 pieces available, price per piece

Condition: ready for operation (used), Schmidt 32-60 pneumatic press Toggle press Brand: Schmidt type: 32-60 Year of construction: 2010 Compressive force: 15 kN min/max operating pressure: 3/6 bar Stroke: 60mm Weight: 45 kg Hnedpfxsqmmbis Afisu You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize! You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, pressure 4,5 kN Hsdpfx Aofv Av Sefionu stroke 40 mm throat 95 mm Working height from to 95 - 240 mm table surface area 160 x 110 mm spindle diameter 25 mm weight of the machine ca. 24 Kg dimensions 160 x 230 mm Direct-acting pneumatic presses bring the full pressure performance over the entire stroke length. You will above all used when long-stroke parts are machined with constant force Need to become. Convincing technology • Long and precise spindle guide for maximum dimensional accuracy • Hardened and ground piston rod for practically unlimited service life • Double-acting cylinders with end position cushioning on both sides • Double guide rings in the piston, constant and quiet running • Oil resistant sealing elements Special features of the PND series • Spindle secured against twisting • Spindle return on the PND 85/S only via a cylinder chamber additional air savings • Easy, quick and precise working height adjustment in 2 steps: – Basic setting by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limiting ring on the piston rod Additional benefit: Faster cycle time and air savings

Condition: new, Year of construction: 2023, Neue messer satz von Bystronic Hnsdpfxjwc Nm Ss Afieu Typ P4 (mit euro klemmung) Gesammt lange 3100 mm

Condition: excellent (used), CATALOGUE NUMBER 6933 TECHNICAL DATA - loading fields 1 - from the front manually adjustable clamping beams 6 pcs - from the top pneumatic pressure beams 4 pcs - length of each pressure beam 795 mm - from the side pneumatic clamps 2 pcs Hedpfx Aok Uxwwsfionu - max length of glued elements 3300 mm - max height of glued elements 1300 mm - max thickness of glued elements 170 mm - dimensions length/width/height 4200x800x1960 mm - weight 820 kg ADVANTAGES - Polish production - mobile - unpainted - used press, very good condition Net price: PLN 23900 Net price: EUR 5620 Net price calculated according to the exchange rate of PLN 4.25/EUR (in case of larger exchange rate fluctuations the price may change)

Condition: used, Year of construction: 2011, Overview  This pneumatic press was manufactured in 2011 by the Italian company ATI. The machine has been inspected and serviced by the technical service and is in very good condition. It is designed for gentle and efficient pressing of grapes and other fruits, making it suitable for wineries and juice production. The press is immediately available. Technical data  Capacity: 45 hL Design: Open tank with axial loading system Valves: Ball valve Support: Mounted on approx. 600 mm legs Hnedpfx Aexa Acxofieu

Condition: used, Pneumatic toggle press BURGER type D04 No. 4497 Year of construction approx. 1972 Compressive force max. 6 ton. Projection 150 mm ram stroke 39 mm Table size 340 x 270 mm Drop-through opening Ø 46 mm Installation height max. 160 mm Tool holder Ø 25 mm ram plate Ø 90 mm Pneumatic operating pressure 5 bar Mains connection 220 V 50 Hz - Pressure regulator for press force adjustment - stroke height adjustment 7, 21, 40 mm - electric foot switch - Table height adjustment Hnsdpfx Aevcdvpofiju Space requirement L x W x H 700 x 500 x 1300 mm Weight 240 kg good condition

Year of construction: 2025, condition: new, functionality: fully functional, Efficient and gentle removal of excess liquid instead of long draining times: The pressure dewatering unit has been specially designed to efficiently remove excess liquid from preserved vegetables as well as pickled or thawed vegetables. The machine is easy to operate and can be handled by a single person. The product to be dewatered, such as canned mushrooms, pickled or thawed vegetables, is placed into the perforated crate. Once the system is started, a plate is lowered onto the product. The product is gently dewatered by applying uniform pressure over this plate. Hodpjxc T Nujfx Afijnu Efficient dewatering and minimal space requirement! The processing of pickled, thawed, or preserved vegetables is simplified and accelerated, as prolonged draining times are eliminated by efficient dewatering through gentle pressing. Due to its compact design, the machine requires minimal space and can therefore be easily integrated into various areas of production. Adjustable working pressure: approx. 6 bar Dimensions (LxWxH): 700x650x1200 mm Weight: approx. 150 kg

Condition: used, pressure 5 t throat 150 mm stroke 40 mm no. of strokes 0 - 80 /min distance table/ram, max. stroke up, adjustment up 260 mm table surface area 340 x 270 mm hole in the table 45 mm table height over floor 780 mm table adjustable 120 mm ram surface 60 mm weight 0,3 t dimensions (WxDxH) 0,4 x 0,8 x 1,4 m pneumatic knuckle-joint press permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with pneumatic driven knuckle-joint system, speed down adjustable, manual stroke adjustment, adjustable table, foot operation, electro-pneumatic control can be inspected in provisorical running condition in our warehouse (see video) Hsdpfsvuuk Uox Afienu

Condition: ready for operation (used), Schmidt 33-156-01 Toggle Press PressControl 500 Pressing force: 15 kN Hodpfx Aoxcn Apefienu Stroke: 40 mm Overrun time: 0.07 sec Overrun distance: 15 mm PressControl 500 Two-hand operation You are welcome to arrange a viewing. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. Specified company names and trademarks are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data as well as errors in the description of the item may occur and are subject to change.

Condition: used, Single-column pneumatic press, hydraulic press PAUL ANTON type PVT 2 Pneumatic table press, embossing press No. 97148 Year of manufacture approx. 1980 Compressive force: 10 ton throat depth: 100 mm Ram stroke: approx. 25 mm Plunger surface: Ø 32 mm Table size: 250 x 220 mm Table opening: 53 x 53 mm Hedpfx Afotrpiijijnu Table height: 1060 mm Installation height: 155 mm - Very stable construction - Hydro-pneumatic press with air to oil pressure ratio - Pneumatic foot switch - ram with M12 internal thread - Metal base Space requirement L x W x H 850 x 620 x 1560 mm Weight approx. 200 kg good condition

Condition: used, Pneumatic Single-Column Press RECTUS - FRIEDMANN & MAIER Type K3000 / 50 / 6A Air-Powered Press Serial No. 3437 Year of manufacture: approx. 1990 Press force: 3.0 tons at 6 bar Press force: 2.6 tons at 5 bar Press force: 2.2 tons at 4 bar Press force: 1.6 tons at 3 bar Press force: 1.0 ton at 2 bar Throat depth: 150 mm Power stroke: 6 mm Pre-stroke: 50 mm Hnedpfx Ajw A Srwofisu Total stroke: 56 mm Ram surface: Ø 100 mm Tool mount: Ø 12 mm Installation height: max. 180 mm Table area: 200 x 200 mm Compressed air requirement: max. 6 bar - Pneumatic power cylinder with mechanical power amplifier (wedge-lever principle) - Press cylinder height adjustable on the frame via threaded spindle (50 mm) - Without pneumatic control system - Throttle valve for stroke speed adjustment Required space (L x W x H): 440 x 230 x 750 mm Weight: 127 kg Good condition 2 units available, price per unit

Condition: used, Pneumatic toggle press, pneumatic press SCHMIDT Type 34-12 Manufacturer No. 400160-03 Serial No. 0028 Year of manufacture 2008 Pressing force 28 kN = 2.8 tons. Throat 130 mm Ram surface 63 x 36 mm Ram stroke 12 mm Hnjdpsv Srfksfx Afisu Clamping pin bore Ø 20 mm with clamping screw Compressed air requirement 2 to 6 bar - Stroke length continuously adjustable via a fixed stop for the upper stroke end position - Fine adjustment for the lower stroke end position with a scale of 1 graduation = 0.05 mm - Stroke triggered via pneumatic valve, triggered by material insertion - 45° press stand made of special aluminum construction - Press tool made of special construction for 3 x Ø 2.5 mm punch holes - Complete unit mounted on an aluminum base plate 600 x 600 x 20 mm Space required L x W x H 720 x 600 x 600 mm Weight 68 kg Very good condition