Used Pressure Press for sale (22,149)

Condition: good (used), Year of construction: 2012, machine/vehicle number: EC1-065-2500, functionality: fully functional, We are offering this well-maintained ALTEC Maschinenbau Powerline 065 PowerLine PL-065 pressure beam/gluing press from 2012. Podjyuvc Aepfx Amkopt

Condition: good (used), ManuMatik / KraussMaffei high-pressure cylinders  The high-pressure cylinders come from a commutator press and were in use there until the end.  Podpfshtyxlox Amkept Total height 184 cm Cylinder height 150 cm Circumference of the rod 28 cm Diameter 8.90 cm The following components are included  Check valves z2s16-1-51 Pressure reducing valve Zdr 6 dp0-45/40ym w80 Scope of delivery 1 x pressing unit Complete factory lock, large selection of storage platforms, pallet racks, shelf racks, paternosters. High quality industrial machines, lathes, grinding machines, hand machines Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: excellent (used), Throughfeed press 3000 mm 14 top cylinders 6 side cylinders Water heating with heating elements in the plate CE marking Year of manufacture: 1996 Ppsdpfx Asx Apxljmkot

Condition: good (used), Mixing Tank, Mixer, Pressure Vessel, Heating Jacket, Chemical Industry, Used Equipment Design: Cylindrical tank with shallow dished bottom and top, equipped with an agitator. The tank bottom and shell are double-walled with a heating jacket. The tank lid is removable with a flanged bolt connection. The lid has a cleaning opening. Material Quality: Carbon steel with painted surface. Manufacturer: Robert Hinkel & Co Ppsdpfx Astrdyromkst Type: 9601 Volume: 200L Operating Pressure: 3 bar Electrical Data: 380V; 0.75kW; 2.0A

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit Ppsdpfx Asfz Dvvjmket • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Ppjdpfjfz Ax Sox Amket The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Ppedpfeflpmqsx Amket

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible Psdpfx Amofzrapjkspt The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps Psdpfx Ajfz A D Nsmkspt The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: new, Year of construction: 2019, functionality: fully functional, total length: 6,000 mm, total width: 1,800 mm, Industrial vacuum and pressure impregnation plant designed for efficient and uniform wood treatment. The T10 features a Ø1,800 mm × 6,000 mm autoclave, handling 8–9 m³ of timber per charge, with operating pressure up to 15 bar (abs). The plant is fully automated via PLC, enabling precise control of vacuum, pressure, time and preservative absorption. Built to EN 13445 standards with third-party inspection, it is suitable for modern chrome- and arsenic-free preservatives. Complete system includes pressure vessel, working tank, vacuum and pressure pumps, cleaning system, trolley loading system and safety features. Ideal for sawmills and industrial wood processors seeking reliable, high-quality impregnation performance. Technical specifications available on request. Ppodpfx Amjx Sdptskjt

Year of construction: 1999, operating hours: 76,000 h, condition: used, functionality: unexamined, Technical parameters: • Manufacturer: AUSTRIAN ENERGY • Type: Dual pressure drum boiler (1999) • HP steam flow: t/h 40.8 Ppjdpfx Ajy D Hy Eemket • LP steam flow: t/h 17.3 • HP steam parameters: bar/°C 52 / 425 • LP steam parameters: bar/°C 4.2 / 180 • Flue gas temperature at HRSG outlet: °C 80 • Flue gas stream to the stack: t/h 468, k Nm3/h 482 • Heat recovered by the steam and water cycle from flue gas in HRSG: MWt 45.9 • Maximum output of DH exchanger: MWt 8.0 • Operating hours: 76,000 hours The high- and low-pressure sections of the equipment and the drums (HP and LP) consist of 6 independent, transportable modules. The boiler wall insulation is partial and requires replacement.

Condition: excellent (used), mileage: 207,559 km, power: 315 kW (428.28 HP), first registration: 12/2011, fuel type: diesel, axle configuration: 6x4, wheelbase: 5,720 mm, fuel: diesel, fuel tank capacity: 15,000 l, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro5, total length: 9,000 mm, total width: 2,500 mm, Year of construction: 2011, = Additional options and accessories = Pedjymrfkspfx Amkopt - PTO = Remarks = Wiedemann Reichhardt 15m³ kolkenzuiger (type: 12.0/2.5 - 320) - bovenzijde, links- en rechtsverschuifbaar (zuigslang Ø200 mm) - Hogedrukslanghaspel achterzijde (120 meter hogedrukslang Ø19 mm) - Capaciteit: 3.000 m³ per uur - Speck Hogedrukwaterpomp (type: P45-75 180) - Achterwaarts kippende opbouw met hydraulische bediening - Extra inspectieluiken op slibtank voor reiniging en onderhoud - Welvaartsweegsysteem (type: Delta 30) - Radiografische afstandsbediening = More information = Technical information Number of cylinders: 6 Engine capacity: 12.780 cc Axle configuration Front axle: Steering Rear axle 1: Double wheels Rear axle 2: Double wheels; Steering Weights Empty weight: 16.700 kg Carrying capacity: 15.300 kg GVW: 32.000 kg Condition Technical condition: very good Visual appearance: very good Identification Registration number: BZ-RB-28 = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, mileage: 271,542 km, power: 368 kW (500.34 HP), first registration: 01/2008, fuel type: diesel, tire size: 385/65r22,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, fuel tank capacity: 600 l, color: white, gearing type: mechanical, number of gears: 12, emission class: euro5, suspension: steel-air, Year of construction: 2007, Equipment: air conditioning, electric window regulation, trailer coupling, Front axle: Tyre size: 385/65r22,5; Suspension: leaf suspension Psdpoyrd Nrjfx Amkjpt Rear axle: Tyre size: 315/80r22,5; Double wheels; Suspension: air suspension Drive: Wheel Number of cylinders: 8 Engine capacity: 15.600 cc GVW: 19.000 kg Make of engine: Scania = Additional options and accessories = - PTO

Condition: new, Year of construction: 2024, operating pressure: 140 bar, total length: 800 mm, total height: 1,700 mm, total width: 1,000 mm, water tank capacity: 95 l, power: 3 kW (4.08 HP), temperature: 45 °C, TurboClean Evo II is a professional high-pressure washer made of stainless steel. The washing process takes place in closed circuit with water with special detergent with max. temperature 45oC. Working pressure is 140 bar, thereby hard to reach places and heavily soiled items of carbon deposits, grease or oil can be thoroughly washed. The flap is equipped with pneumatic drives, to increase the safety and the quality of work the washing machine. It is also equipped with oil skimmer, a brush and an air gun. There are cleaning nozzles installed on the window, which improve visibility and ease of work. Podpfjq Ru Amsx Amkspt It is a perfect solution for workshops and parts remanufacturing. Manufactured in Poland.

Condition: used, - Diameter: 27–36 mm, - Internal thread approx.: 30.5 mm, - 5 x 1.5 m, - 1 x 5 m. Podpfxjlkcipj Amkopt

Condition: used, - 100 x 72 x 12 mm, - Available: 5 units, Price per unit: €25.00 + VAT Pjdpfx Amslkcguskjpt

Condition: used, - 60 x 72 x 12 mm, - Available: 2, Pjdpfslkcgxjx Amkept Price per piece: €20.00 + VAT.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, functionality: fully functional, A new, unused centrifugal fan from Elektror is offered for sale here. This was bought for one of our projects but was never used. Psdpfx Aekt S S Nsmkopt Availability: In stock Quantity: 1 piece Further information can be found on the nameplates. Feel free to contact us if you have any questions.

Year of construction: 2015, condition: refurbished (used), functionality: fully functional, machine/vehicle number: •SN:749951, ASK FOR YOUR SPECIAL PRICE!!!!! Here we offer a 150-litre round pressure boiling kettle (FES 150) from the premium manufacturer Küppersbusch (Phoeniks). Draining is made easy with a safety drain valve. The pressure boiling kettle features an electronic temperature controller and an innovative KCI touch panel control system. The unit has undergone a comprehensive inspection in our in-house workshop and is fully operational. The pressure boiling kettle is virtually unused and in excellent condition. Our used equipment service for you: • 6 months warranty on all electrical parts • High-quality branded equipment at fair prices • Professional overhaul / inspection & thorough cleaning • Tested & fully functional – or your money back • Flexible options for shipping or collection • Expert advice – before and after purchase • Provision of operating manuals, wiring diagrams & spare parts • Inspection according to DGUV V3 certification Technical details: • W x D x H: approx. 100 x 85 x 90 cm • Power connection: V: 400 / kW: 23.1 • Type: FES 150 • Serial no.: 749951 • Year of manufacture: 2015 Condition: Used, fully serviced, fully functional Warranty conditions: Please note that units with a three-phase connection (400V), water connection, and/or gas-powered devices may only be connected by a company certified by the manufacturer! Warranty claims are valid only with submission of the commissioning protocol. Further features: Ppjdpfx Amsv Iku Njkst • Usable volume: 155 litres • Low-maintenance, sealed PERMAPRESS system • Device switch, power selection switch • Electronic temperature controllers with setpoint and actual value display • Lid drainage via discharge pipe • Fixed electrical connection • Fill level marking, with 10-litre gradations • Continuous boiling function • RS 485 interface • Standard safety interlock • Double-wall lid, spring-balanced • 4 quick selection options for temperature and cooking time • Water inlet via lid-operated swing arm fitting • Mixing tap with hot and cold water valves • IPX5 Shipping: • Delivery or self-collection by arrangement • Worldwide shipping on request • Shipping to islands or mountain stations only by arrangement If you have any questions, would like advice, or want to inspect the equipment on site, you can reach us by phone during our business hours: Monday–Friday 09:00–13:00 and 14:00–17:00.

Condition: excellent (used), Pressure beam saw PANHANS ECOPAN -used- PC control with optimization, scoring unit, automatic cut length detection, side pressure device, air cushion tables, movable tables, infinitely variable feed rate of the saw carriage, label printer ----- Technical Data ----- Cutting length: 4,200 mm, Cutting width: 4,200 mm, Max. cutting height: 72 mm, Number of clamps: 6 pcs, Feed rate saw unit max.: 100 m/min, Feed rate for width stop max.: 80 m/min, Main saw motor power: 11 kW, Scoring saw motor power: 1.5 kW, Main saw blade Ø: 300 x 30 mm, Scoring saw blade Ø: 180 x 30 mm, Extraction port Ø bottom: 140 mm, Extraction port Ø on pressure beam: 3x100 mm, Airflow volume: 5,000 m³/h, Compressed air connection: 6 bar, Air consumption: 140 l/min, Nominal current: 38 A, Max. circuit breaker: 50 A Ppsdpfx Ajyrqrtjmkot Quality information: - complete basic inspection - complete basic cleaning - Electrics checked - immediately ready for operation

Condition: excellent (used), Pressure beam saw HOLZ-HER Cut 70 6110 -used- PC control with optimization, scorer unit, automatic cut length detection, side pressure device, air cushion tables, infinitely variable feed of the saw carriage, touchscreen, label printer ----- Technical Data ----- Cutting length: 3900 mm, cutting width: 3100 mm, max. cutting height: 70 mm, number of grippers: 6 pcs, max. saw unit feed: 0-70 m/min, max. rip fence feed: 25/70 m/min, main saw motor power: 11 kW, scorer motor power: 1.1 kW, main saw blade Ø: 350 mm, scorer saw blade Ø: 180 mm, dust extraction port Ø below: 120 mm, Ppodpoyu N Rgsfx Amkjt dust extraction port Ø on pressure beam: 3 x 120 mm, nominal current largest consumer: 20.6 A, max. fuse: 35 A Quality Info: - Saw spindle newly mounted - Scorer newly mounted - Complete basic inspection - Complete basic cleaning - Electrical system checked - Immediately ready for operation

Condition: used, Year of construction: 1986, Technical details: Pjdsu Nkk Ropfx Amkept weight: 7,5 kg number of strokes: 2000 Hub / Min Torque: 15 kp dimensions L x W x H: 170x160x130 mm air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa air pressure consumption 1,1m³/min with 0,5 MPa tightening force: 80kN accessories: copy of documentation available 13 pcs available i.D. *

Condition: used, functionality: fully functional, Compact cold-water high-pressure cleaner from Cleancraft with integrated hose reel and TwinSystem detergent selection. Well suited for garden, yard, car, motorcycle, facade, and everyday cleaning tasks – this device type falls between hobby and semi-professional equipment. Technical data: - Model: HDR-K 85-16 TF (Cleancraft) - Working pressure: max. 85 bar - Flow rate: approx. 16 l/min - Connection: 230 V / 50 Hz - Features: hose reel, spray gun, variable nozzle, TwinSystem (2 detergent levels) - Carrying handle: foldable Ppsdpfxjzabxge Amkot Collection / Transport: Shipping as a package is possible (plus shipping costs) or self-collection in Stralsund.

Condition: ready for operation (used), functionality: fully functional, Mobile Kärcher hot water high-pressure cleaner from the professional HDS series. Diesel or oil-fired (typical for mobile HDS units) for generating hot steam/hot water jets up to approximately 80-155 °C. Ideal for greasy, oily, and heavily soiled applications: vehicle cleaning, food processing facilities, agriculture, construction sites, and machine cleaning. Complete with hose reel, spray gun, and lance. Podezabu Uspfx Amkjpt Technical data: - Brand: Kärcher (professional HDS series) - Type: mobile hot water high-pressure cleaner - Connection: three-phase CEE - Heating: burner (diesel/heating oil) - Hose reel: included - Accessories: spray gun, lance Note: Please check the exact model number and performance data on the unit - the nameplate is visible on site. Collection/transport: Self-collection with a van. Loading with a forklift / 2 people. Shipping by freight carrier on a pallet upon request.

Condition: used, Year of construction: 2020, Industrial high-pressure cleaner, professional grade – 500 bar / 15 l/min. Suitable for heavy-duty cleaning tasks: cleaning of building structures, facade cleaning, tank and container cleaning, industrial plants, machine cleaning, rust removal. Complete equipment on a frame with hose set, gun, and lance. The unit comes from the inventory of a professional user and has been used appropriately – manufactured in 2020, making it relatively new for industrial equipment of this class. Technical data: - Model: HHPC 500/15 XS - Year of manufacture: 2020 - Serial No.: 06201096 - Voltage: 400 V / 50 Hz - Power: 15 kW - Working pressure: 500 bar - Delivery rate: 15 l/min Ppjdpfx Ajzabuhsmkot - Weight: 150 kg - Connection: CEE plug - Equipment: High-pressure hose, gun, lance Collection / transport: Self-collection with a van / trailer. Loading with a forklift / 2 people is possible. Shipping via a freight forwarder on a pallet is possible by arrangement.