Used Assembly Machine for sale (66,203)

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, ERSA VERSAFLOW 4/55. Selective soldering wave for PCBA soldering - Fluxing module 130um - Bottom IR preheater - Two top hot air preheaters - Laser for PCBA warpage measurement - Versa Cam x2 - Solder wire feeder x2 Kedsyu Ihqspfx Ahvoww - Two solder pots (Y/Z variable), automatically adjustable - Conveyor width adjustable automatically (max 508mm) Machine fully functional, lightly used, available at the end of week 13.

Condition: like new (used), Year of construction: 2022, A Manz hot press is for sale. It is disassembled and stored in our warehouse, and can be inspected ready for connection. It was used in aircraft manufacturing. Kwjdpfx Aoyhq Adshvjw

Condition: new, Year of construction: 2026, functionality: fully functional, Retractor EV Pneumatico with Automatic Cable Retractor / Charging Cable Holder The Pneumatico Retractor EV is an innovative holder with automatic cable retraction, revolutionizing the charging process for electric vehicles. This device not only makes charging the vehicle easier but also tidies up cable management effortlessly. The retraction unit is available in four models with different load capacities: EV0, EV1, EV2, EV3. What is the Pneumatico Retractor EV used for? The Retractor EV is designed for the management of electric vehicle charging cables. The housing is made of galvanized steel, making it weather-resistant. It features a 180-degree rotating mount that facilitates easy and convenient cable handling. The modern design and powder coating provide a high-quality, aesthetic finish. The extended cable is up to 300 cm long and manufactured from special, high-strength Dyneema fibers that do not damage vehicle bodywork. At the end of the cable, there is a rotating handle to prevent cable twisting. The retraction force can be adjusted using a wrench. Installation of the retraction unit is simple and quick. The suspended cable remains clean, as do the operator's hands. Lifting capacities range from 1.00 kg to 8.00 kg depending on the selected version. Does the Pneumatico EV Retractor fit every charging cable? Yes. The basic clamping range for cable diameters is from 16.5 to 32 mm, and the load capacity of the retractor ranges from 1.00 to 8.00 kg. If the cable diameter differs, we supply a custom cable holder with the required diameter and use a retractor with a higher load capacity. The Pneumatico Retractor EV is the ideal device for both private and commercial use. Pneumatico Cable Retractors – EV Series (EV0 / EV1 / EV2 / EV3) We offer Pneumatico spring-cable retractors in various load capacity ranges – ideal for industrial applications such as cable management and tool balancing. Load capacities / Models: EV0: 1–2.5 kg EV1: 2–4 kg EV2: 4–6 kg EV3: 6–8 kg Cable diameters (available for all EV models): 16.5–18.5 mm 19–20 mm Kjdpfjygv Dkjx Ahvoww 21–22 mm 22.5–24 mm 24.5–26 mm 26.5–28 mm 28.5–30 mm 30.5–32 mm

Condition: ready for operation (used), Year of construction: 2020, An automation machine Infinite Technologies and Robotics (CN) for automated assembly of clips on electroplated chrome trim strips is available. Clips per component: 6, component geometries: 4, pressing force: 100N, pressing force tolerance: +/-10N, positioning tolerance: +/-0.3mm. Sliding tables: 2, sliding table dimensions X/Y/Z: 1180mm/770mm/15mm, sensors: 4. Tool holders: 2, holder dimensions X/Y/Z: 740mm/490mm/190mm, max. holder weight: 20kg. Axis systems: 2, travel X/Y/Z: 800mm/400mm/300mm, max. speed: 250mm/s, spindle pitch: 5mm, payload: 330N. Machine dimensions X/Y/Z: approx. 3700mm/2250mm/2300mm, weight: approx. 3000kg, control: Siemens S7. Including vision system Keyence, sensors Sick and pneumatics SMC. Documentation available. An on site inspection is possible. Kjdpeyrta Tofx Ahveww

Condition: used, Pneumatic press, compressed air press BOSCH type Manufacturer no.: Year of manufacture: 1980 Pressing force: 18 kN = 1.8 t at 5 bar 15 kN = 1.5 t at 4 bar 12 kN = 1.2 t at 3 bar 8 kN = 0.8 t at 2 bar 6 kN = 0.6 t at 1.8 bar Throat depth: 100 mm Ksdpsh U Dtujfx Ahvsww Ram stroke: 70 mm Table size: 245 x 200 mm Ram face: Ø 45 mm Max. installation height: 235 mm Clamping pin bore: Ø 20 mm with clamping screw Compressed air requirement: 5 bar - Pressing force infinitely adjustable via pressure regulator - Pneumatic cylinder with ram adjustable in height by 90 mm - Pneumatic dual-hand control - Mounted on a metal frame with wooden boards Required floor space (L x W x H): 1050 x 700 x 1600 mm Weight of pneumatic press: 82 kg Weight including table frame: 140 kg In very good condition

Condition: used, Clamping plate, machine table with metal base Clamping table, assembly table, clamping angle plate Clamping surface: 1200 x 370 mm T-slot spacing: 90 mm Table height: 870 mm - The T-slot table was originally a machine table from a milling machine - 4 T-slots, 16 mm Kwodpewkvi Nefx Ahvow - Metal base with height-adjustable feet - Multilayer wood plate L x W x H 1200 x 400 x 18 mm Overall dimensions L x W x H 1400 x 770 x 870 mm Weight: 250 kg good condition

Condition: like new (used), Year of construction: 2023, functionality: fully functional, The plant consists of 7 linked units. Two pictures are provided for each plant/unit - each in a separate handout. For more detailed information about the plant, you can visit the plant on-site. The plant consists of 7 linked units. Two pictures are provided for each plant/unit - each in a separate handout. For more details about the plant, you can visit the plant on-site. ----- ----- Please state your offer price!!! Sale only within Europe, including Turkey. Price excludes packaging; Delivery terms: FCA (machine location). ===== Kwedewf S D Sepfx Ahvow For technical data, see handout. We assume no liability for the accuracy of the technical data and year of manufacture, for the completeness of accessories and tooling, and for compliance with all safety and environmental protection requirements specified in accident prevention regulations. Not for sale to private individuals. Sales only within Europe, including Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guarantee and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 2003, condition: used, SCHNELL Idea 12/25 assembly machine Machine recently dismantled in working order, production stopped. 3 payoffs Payoffs: 3 Kedpoymb Nrofx Ahvsww

Condition: used, machine/vehicle number: 307264.3, Winding machine Meteor Compact Type 307-01 Winding diameter 80 mm x 350 mm Wire thickness 0.15 - 0.5 mm Kwjdpfsylnb Esx Ahvsw

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 66N-1507, Micafil Winding Machine OFAnII No. 402 No. 66 N - 1507 Wire diameter 0.006 - 1.5 mm Winding range 80 x 500 mm Tailstock missing Kodpfjylmhkjx Ahveww Micafil Winding Machine OFAnII No. 403 No. 66 N 1504 Wire diameter 0.006 - 1.5 mm Winding range 80 x 500 mm Winding range

Condition: used, Year of construction: 2015, operating hours: 35,052 h, Operational machine! Kwedpfjx Nh Rpjx Ahvew Modular Type Multi - Purpose Automated Fabrication Machine sFAB50. Hours worked: 35052 The component feeders: Radial tape feeder pitch 12,7 mm - 3 pcs. Horizontal stacked stick feeder - 1 pc. The ball screw of X-axis may need to be replaced in the near future. Ask for specifications!

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 1,500 kg, We are offering this new RUBIX assembly machine, year of manufacture 2025. I am a professional in the industrial sector, offering my services as an industrial premises developer. During a relocation and the construction of a new platform, my client RUBIX transferred to me some new, packaged hydraulic and pneumatic equipment after discontinuing this activity from their range of industrial equipment supply. Therefore, I am offering for sale a batch of equipment as listed in the attached document: hydraulic pumps, hoses, and fittings. I can provide a sales invoice and offer an attractive price for the lot, which is valued at €43,000 (excluding VAT). Kedpoyc Eudefx Ahveww I remain available to discuss with you according to your interests. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Year of construction: 1992, condition: used, Technical details: voltage: 380 V/Hz sizes from - to: Ø 6 bis Ø 50 mm total power requirement: 1,5 kW weight of the machine approx.: 293 kg dimensions of machine: 690 x 380 x 1150 mm Application: Assembly of hose lines Process: pressure-controlled pressing with assembly tools Hydraulics 240 bar overpressure, capacity/capacity for 20 liters Electro-hydraulic drive Operation ON/OFF switch and foot control Machine is currently equipped with jaw set DN 12 16 (code 220) Further jaw inserts available: DN 6 - 10 (code 215) Kwedpfxjvc Atgo Ahvsw DN 20 - 25 (code 230) DN 32 (code 240) DN 40 (code 245) DN 50 (code 260) without code: DN 21; DN 22; DN 33; DN 34; DN 35; DN 37; DN 39 *

Condition: used, Year of construction: 2010, The machine has recently undergone service. Machine may need following repairs: A damaged guide rail clamping the PCB was observed. Transport belts are in poor condition. Mirrors in the camera module need to be cleaned before calibration. Software version Si 8.60 may require an update. Ksdpfx Aox Tv Rxjhvsww Otherwise it is operational.

Condition: like new (used), Year of construction: 2025, functionality: fully functional, type of input current: three-phase, warranty duration: 12 months, input voltage: 220 V, control voltage: 220 V, Equipment: CE marking, High precision, adjustable full automatic oral bottle filling sealing machine . Kwsdpfxoxl Edcj Ahvow

Condition: good (used), Year of construction: 2008, Hydraulically Height-Adjustable Pallet Truck from Witte - Alufix for loading coordinate measuring machines With Hovercraft Air Bearing Plate Pallet truck with hydraulic height adjustment from approx. 660 mm to 950 mm. Table top coated with a roller on the broad side for bridging height differences between the table and measuring plate. Internal dimensions approx. 900 x 700 mm. Eurofix air bearing plate with handle and integrated air valve for easy movement and positioning of heavy workpieces on coordinate measuring machines. The surface is equipped with 50 mm grid pattern boreholes. The holes have a diameter of 12.5 mm, a depth of 7 mm, and M6 threaded inserts at the base. The air supply can be activated via the valve integrated in the handle, allowing the entire plate with the mounted measuring object to be moved very easily. Usable area (aluminum) is approx. 600 x 600 mm. Ideal for Witte Alufix clamping systems for fixture construction in the automotive sector, etc. Dimensions approx. 1000 x 800 x 660/950 mm (LxWxH). Weight approx. 100 kg. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See "more offers from this supplier." Kwodpsw Nylkefx Ahvow

Year of construction: 1988, condition: new, Ingramatic RP1/R for washer assembly M6x75/40mm. Fixed die length: 85 mm. Moving die length: 95 mm. Die height: 65 mm. 230-600ppm. Completely overhauled like new. Machinery visible in Calolziocorte (LC) REVISION ACCORDING TO CE STANDARDS. Kwedpfjlcbkgjx Ahvew The review includes: - Disassembly and cleaning of each piece - Replacement of all bearings - Correction of guides or possible replacement - Introducer group revision - New washer assembly group - Slide unit overhauled with bronze gibs replaced - New lubrication system with hydraulic unit complete with pump, level switch, pressure switch and distributors - New die water pump - New cup vibrator diam. 670 mm. complete with vibrator control panel and overflow photocell - Revision of the roller evacuation group - Protective casing complete with lamp and micro - Solenoid valve installation with new air system for vibrator and guides - New electrical system in accordance with CE standards complete with inverter - New engine - Belt replacement - RAL painting indicated by you

Condition: used, Year of construction: 2006, Operational condition. Lightning Head Left-to-Right PCB Transfer Direction 3mm (0.117") Edge Clearance HSC Nozzle Changer Kit Kedoxva Dlepfx Ahvoww Fixed 36 Slot Feeder Bank 4" Outbound Rear Single Lane Brd Support 30-SPINDLE HEAD PERFORMANCE KIT UPGRADE KIT, ACCURACY ENHANCED SPINDLE Second Rear Interface

Condition: used, Year of construction: 2006, Machine operational condition. FlexJet 2.6MPP Front Head / Pressure Enhanced Rear Head Magellan 2.3 MPP – Rear Four Sided PEC Lighting Board transfer Left-To-Right 3mm Edge Clearance Rear DPTF Mounting Location 4” Outbound, 18” Max. Bd Automatic PWC Single Lane Board Support Kwodpfx Ahexvay Tsvow All Feeder Banks Fixed 24V Transformer Kit Interface Machine With PTF Rear User Interface Kit CE Compliance GSM SECII/GEM Software Driver, S/W, New Product Introduction English Flip Books Ask for additional information!

Condition: used, Year of construction: 2008, Machine is from 2008 and is the 12 head version. Ksdpfow Rfckjx Ahveww The machine has 1 problem, the X motor is running at 60%, it has an issue. Machine is being used daily in production until today. If any Feeders/Trolleys available and included are still to be confirmed. Maintenance done by OEM representative.

Year of construction: 2004, condition: good (used), functionality: fully functional, Selling 1 Juki FX-1 and 2 Juki FX-2 from current production. Please contact me if you have any questions. Kwsdpfevk R H Rsx Ahvjw

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, type of input current: three-phase, overall weight: 3,000 kg, total length: 10,000 mm, total height: 2,000 mm, total width: 10,000 mm, Equipment: documentation/manual, This machine is used for the automatic production of flat three-layer masks by automatic forming from non-woven fabric rolls, automatic transfer, with a nose clip and rolled material of a set length cut simultaneously, folding at the edges of the mask, folding and flattening, joining by ultrasonic welding, cutting and forming, ultrasonic welding of loops for ears, etc. - All these processes are done automatically. Main parameters: -Suitable for mask types: Regular three-layer medical mask (disposable medical masks), surgical mask and medical protective mask -Product specification: Mask for adults: 175 mm x 95 mm, optional child mask 165 mm x 95 mm; or 145 mm x 95 mm -Speed: 60 pcs/min -Material: PP non-woven composite fibres (three layers), typically 25 g per square meter -Other materials: Nose clip (3 mm), ear loops (nylon with elastic, usually 3 mm) -Processing method: Ultrasonic welding -Air flow volume: 1700 l/min -Power: 20 KW, 220V/50Hz -Dimensions: 10m x 10m x 2m -Weight: 3000kg Technical features: Kwodpjudy Acefx Ahvew (1) Self-alignment of three rolls of material fed into the machine, i.e. the outer, filter and inner layer. Continuous symmetrical ultrasound compression of both sides. Continuous pressing with rollers, followed by cutting. The production line branches off into two separate welding machines for attaching ear loops, enhancing line balancing and achieving high productivity. Automatic counting and folding after the ear loops are welded. (2) The production line follows the »1 in 2« principle, which is the core component of the mask production system, distributing two sets in production for to weld the ear loops. (3) Ear loops can be made by automatic cutting and automatic welding with ultrasound. (4) The nose clip can be made by automatic feeding and cutting. (5) The system offers stability, few malfunctions, a pleasant appearance, high efficiency, energy savings and full automation.

Condition: refurbished (used), Year of construction: 2008, machine/vehicle number: SO 7.186-4, ASSEMBLY MILLING MACHINE / MULTI-SPINDLE DRILLING MACHINE Brand: HOFFMANN Type: PP2-H-DB-SDE-10E Serial no.: SO 7.186-4 Year: 2008 Machine designed for slot milling in combination with the HOFFMANN assembly system. Composition : . 1 Double dovetail assembly milling machine . 2 multi-spindle drilling machines, each with 2 ramps of 5 horizontal spindles. A total of 20 rear horizontal drilling spindles. Technical data : . Number of motors: 2 x drilling / 1 x milling . Direction of rotation: right . Drilling speed : 2800 1/min. . Dovetail milling speed : 25000 rpm. . Collet: Ø 8 mm. . Max. milling depth: 160 mm. right / left . Drilling depth: 16 mm. . Table height: 950 mm. . Electrical connection: 3 ph / N / PE 230/400 v. 50/60 Hz 4.5 KW Kwodpfjikq Nnjx Ahvjw . Compressed air connection: 6 bar . Operating pressure: 4-6 bar . Noise emission : 75.3 dB(A) . Suction requirement : 62 mg/m3 . Dimensions : L=1300 mm. D=900 mm. H= 1560 mm. . Weight : 180 Kg Little-used machine, in a prototyping workshop, very clean and in perfect condition. Ideal for assembling Holz Schiller window profiles. Numerous assembly inserts supplied with the machine.

Condition: excellent (used), Unused Ingersoll Rand QM Series Nut Runner - interconnecting cable and controller Kwedpfx Aewric Eshvew

Condition: ready for operation (used), functionality: fully functional, A good used Hopper Feeder fopr feeding small parts into assembly machine or feeding a bowl feeder with bulk parts - stainless steel conveyor - flighted belt (comes with a second spare belt also) - three phase geared drive unit - 24 V DC sensors (2) for control of belt index if required Ready to ship worldwide More pictures and videos available upon request Kwedpew D Ev Eofx Ahvsw