Used other lathes for sale (261)

Year of construction: 1965, condition: ready for operation (used), A WMW lead and feed spindle lathe that was overhauled in 1993 and has not been used since then is available. Center width: 1600mm, turning length: 1600mm, turning diameter: 250mm, turning diameter over bed/cross slide: 450mm/250mm, steel holder surface X/Y: 140mm/140mm, steel cross-section: 25mm/25mm. Speed: 2240rpm, spindle bore: 45mm, faceplate diameter: 450mm, quill stroke: 160mm, max. workpiece weight: 800kg/1250kg, max. journal diameter: 60mm. Including taper turning device, coolant device and quadruple steel holder. Documentation available. On-site inspection is possible. The machine was not used after its overhaul in 1993. Godjvy E A Sepfx Afisuh

Condition: ready for operation (used), Turning diameter over bed/cross slide: 530mm/280mm, center height: 264mm, center width: 2000mm, bed width: 370mm, speed: 2000rpm, spindle bore: 80mm, tool shank dimensions X/Y: 25mm/25mm, cross slide travel: 300mm, quill diameter: 65mm, quill stroke: 180mm, repeat accuracy: mm. The machine has an electrical problem on the tool head. Documentation available. On-site inspection is possible. Gujdsv Amrtjpfx Afioh

Year of construction: 2002, condition: ready for operation (used), Axes: XYZCB (8-axes), max. turning diameter: 250mm, max. turning length: 300mm, bar loader diameter: 65mm, tool system: VDI30/tooth profile, torque: 150Nm, speed: 5000rpm, drive power: 22kW, control: Siemens Sinumerik 840D powerline. Dimensions X/Y/Z: approx. 2430mm/5600mm/2430mm, weight: approx. 13000kg, operating hours: approx. 34624h, spindle hours: approx. 22797h. Gujdjtufbyepfx Afieh

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, turning length: 400mm, turning diameter: 420mm, bar diameter: 60mm, max. spindle chuck diameter: 160mm, speed: 5000rpm, turret: 2, positions: 2x14, rapid traverse X/Z: 20m/min/30m/min. Machine dimensions X/Y/Z: approx. 7500mm/2100mm/2100mm, weight: approx. 4500kg. Documentation available. On-site inspection is possible. Gsdpfxsu T Rgkj Afijuh

Year of construction: 2002, condition: ready for operation (used), Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible. Gusdpfx Afoubyy Nsioh

Year of construction: 2000, condition: ready for operation (used), Max. swing diameter: 300mm, swing diameter over radial slide: 190mm, travel X/Z: 175mm/300mm, turning length: 250mm. Spindle flange diameter: 120mm, spindle diameter in front bearing: 80mm, material passage: 42mm. Speed: 6000rpm, feed force X/Z: 3.6kN, rapid traverse X/Z: 24m/min. Tool positions: 12, cylindrical shank diameter: 30mm, turning tool shank height: 20mm. Quill diameter: 70mm, automatic quill stroke: 90mm, max. quill force: 8.8kN. Dimensions X/Y/Z: approx. 2300mm/2400mm/1800mm, weight: approx. 3500kg, control: Siemens Sinumerik. Including bar loading machine Breuning IRCO PROFImat. Documentation available. Gedpfjtxquhox Afisuh

Year of construction: 2011, condition: ready for operation (used), An Emag vertical CNC lathe is available. Clamping chuck diameter: 250mm, max. circulation diameter: 270mm, max. machining diameter: 250mm, max. machining length: 175mm, speed: 4500rpm, tool positions: 12, tool holder: VDI 40, travel X/Z: 660mm/300mm, rapid traverse X/Z: 60m/30m/min. Machine dimensions X/Y/Z: approx. 4300mm/1600mm/3300mm, weight: approx. 7500kg, control: Fanuc Series 32i-Model A, operating hours: 64137h. Including automatic loading and unloading with pick-up spindle and integrated part diverter and workpiece storage. Documentation available. On-site inspection is possible. Gedswtg E Tspfx Afiouh

Year of construction: 1981, condition: ready for operation (used), An older CNC lathe Gildemeister is available. Turning diameter: 650mm, turning length: 2000mm, control: Siemens EPM, operating hours: 73347h. Including one steady rest and one tailstock. The steady rest has a crack. Documentation available. On-site inspection is possible. Gusdpfx Ajwihz Uefieh

Year of construction: 1990, condition: ready for operation (used), Turning diameter: 450mm, orbital diameter over bed/face slide: 600mm/500mm, turning length: 1020mm, traverse path X/Z: 250mm/1100mm, rapid traverse X/Z: 12m/16m/min. Speed: 2500rpm, power: 22kW, spindle diameter: 100mm, spindle bore: 91mm, tool positions: 10, quill diameter: 110mm, quill stroke: 180mm. Machine dimensions X/Y/Z: approx. 8000mm/3000mm/2000mm, weight: approx. 6500kg, control: Fanuc Series 15-T. The control system has a fault. An on-site inspection is possible. Guedswmdvispfx Afieh

Year of construction: 2004, condition: ready for operation (used), A Gildemeister CNC double-spindle turning and milling center including coolant system and chip conveyor is available. Turning diameter over bed: 640mm, machining diameter: 400mm, center distance: 1930mm, travel X/Z: 550mm/1585mm, travel Y: +/-110mm, B-axis: +/-120° (interpolating), C-axis: 360°. Main spindle: power: 36kW/45kW, speed: 4000rpm, torque: 600Nm-730Nm, bore: 107mm. Milling spindle: Speed: 12000rpm, power: 13.2kW/22kW, torque: 100Nm. Tool places: 60, carrier: turret 12-fold star SW 380, machine dimensions X/Y/Z: approx. 9300mm/4600mm/3100mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D powerline. Documentation available. On-site inspection is possible. Godpfowmdv Aex Afieuh

Condition: ready for operation (used), Three Okuma CNC horizontal lathes are available. 1) Okuma LB 15 M. 2) Okuma LB 15. 3) Okuma LB 15 W. The Okuma LB 15 W is defective. On-site inspection is possible. Individual sale possible. Gsdpfx Afowmdv Njisuh

Year of construction: 2010, condition: ready for operation (used), Turning diameter over bed/face slide/crank: 460mm/258mm/785mm, center width: 1016mm, bed width: 300mm, spindle bore: 58mm, speed: 2000rpm, diameter lead screw/quill: 35mm/65mm, quill adjustment: 127mm. Machine dimensions X/Y/Z: approx. 1900mm/850mm/1200mm, weight: approx. 1650kg. Documentation available. On-site inspection is possible. Expected to be available from the end of May 2025. Gedpowal H Ajfx Afieuh

Year of construction: 2015, condition: ready for operation (used), A CNC double-spindle lathe Traub overhauled in 2025 is available. Turning length: 450mm, spindle clearance: 65mm, speed: 4000rpm, main spindle/counter spindle power: 18.5kW/11kW, tool positions: 10, driven tools: 10, hydraulic capacity: 150l, hydraulic pressure: 60bar, connected load: 39kW. Rapid traverse X1/X2: 15m/min, feed force: 5000N, feed path: 140mm. Rapid traverse Z1/Z2: 30m/min, feed force: 8000N, feed path: 450mm. Rapid traverse Y1: 6m/min, feed force: 8000N, feed path: +/-35mm. Machine dimensions X/Y/Z: approx. 4150mm/2000mm/1800mm, weight: approx. 4750kg, control: Traub System TX 8F, operating hours: 12938h. Including chip conveyor and bar loader LNS Quick Load. Documentation available. On-site inspection is possible. Guodpfsv Scrbox Afieh

Year of construction: 1988, condition: ready for operation (used), Center height: 420mm, turning length: 600mm, orbital diameter over bed/face slide/in the offset: 900mm/1150mm/800mm, max. workpiece weight: 2500kg, spindle diameter in front bearing: 203mm, face plate diameter: 800mm, max. torque: 8000Nm, spindle bore: 100mm, max. chuck diameter: 1150mm. Bed slide longitudinal stroke: 600mm, face slide face stroke: 600mm, feed X/Z: 5m/min, speed: 710rpm. Machine weight: approx. 15000kg, control: Siemens Sinumerik System 3, repairs carried out: Cross slide (2022), guideways/wedge power, control components, main spindle motor, wiper (annually), V-belts and ball screws. Including dry casting machining (without cooling lubricant system), hydraulic unit, automatic door and chip conveyor. Documentation available. On-site inspection is possible. Gujdpjwa A Tyefx Afieh

Year of construction: 2002, condition: ready for operation (used), With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300/ -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, turning lengths: 1500/2000/2500/3200/4000/4500/6500mm, swing diameter: 780/ 880mm, turning spindle bore: 92/123mm, main spindle speed range: min, max. Turning/milling unit speed: 5000/6000/10000/min, max. tool length: 900/600/1000/300/900mm, quill stroke: 160/170mm, connected load: 102kVA, control system: SINUMERIK ONE / SINUMERIK 840D sl, drive system control: SINAMICS S120, weight: 17t. On-site inspection is possible. Godpfswbuyzsx Afisuh

Condition: ready for operation (used), A Romi CNC cycle lathe is available. Center height: 215mm, center width: 1000mm, turning diameter over bed/face slide: 430mm/204mm, spindle bore: 53mm, rapid traverse X/Z: 7.5m/min / 10m/min, spindle speed: 4000rpm, main spindle motor power: 7.5kW, tool positions: 8, machine dimensions X/Y/Z: approx. 2800mm/1300mm/2000mm, weight: approx. 3000kg, control: GE Fanuc series 21i-TB. Documentation available. On-site inspection is possible. Gsdpeu H H Hvjfx Afijuh

Year of construction: 1976, condition: ready for operation (used), Max. turning diameter: 500mm, max. turning diameter over bed/bed slide: 600mm/315mm, speed: 4000rpm, max. slide travel: 500mm, rapid traverse: approx. 10m/min. Tool slots: 2x8, tool holder: VDI 3425, tool size: 20, max. bar diameter: 65mm, max. thread pitch: 2000mm. Documentation available. The machine has a damaged gearbox. Godpot Td U Nefx Afisuh

Year of construction: 2000, condition: ready for operation (used), Number of axes: XYZC (8-axis), turning diameter: 250mm, turning length: 300mm, spindle diameter: 71mm, speed: 4500rpm, tool holder: BMT-55, number of tool positions: 2 x 12 positions, dimensions X/Y/Z: approx. 4000mm/4600mm/2200mm, weight: approx. 6000kg. Including bar loader Profimat IRCO Breuning, year of construction: 2004, bar diameter/length: 52mm/3000mm, dimensions X/Y: 1200mm/4000mm. Gjdetufb Dspfx Afiouh

Year of construction: 1994, condition: ready for operation (used), Tool swing circle diameter: 1100mm, travel X/Z: 630mm/630mm, spindle bore: 66mm, flange diameter: 380mm, spindle upper edge: 960mm, headstock bearing diameter: 240mm, feed: 18m/min, rapid traverse: 10m/min, speed: 2240rpm. Machine dimensions X/Y/Z: approx. 4000mm/2500mm/3500mm, weight: approx. 14000kg, control: Siemens. Documentation available. On-site inspection is possible. Guodpfx Afev Hgiysish

Year of construction: 2018, condition: ready for operation (used), A high-precision horizontal lathe WMZ in need of overhaul is available. Processes: Drilling, turning, milling, skiving, tool holder: VDI40, tool positions: 12, workpiece length range: 180mm-600mm, workpiece diameter range: 50mm-95mm, max. workpiece weight: 5kg, cycle time: 48min, control: Siemens 840D SL, operating hours: 15726h. Including cooling lubricant system Knoll KF 150-75, chip conveyor Knoll, air cleaner Mahle and hydraulic unit Hydac. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible. Godpfsvz Dfzex Afieuh

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Godpfx Afevwcwujijuh

Year of construction: 1983, condition: ready for operation (used), Center height: 180mm, center width: 800mm, turning diameter over bed/face slide: 380mm/200mm, spindle bore: 52mm, speed: 1500rpm, bed width: 330mm, quill stroke: 180mm, quill holder: MK4, machine dimensions X/Y/Z: approx. 2000mm/850mm/1450mm, weight: approx. 1050kg. On-site inspection is possible. Gusdpfx Afov Amp Soish

Condition: ready for operation (used), Center height: 165mm, center width: 800mm, turning diameter over bed/face slide: 330mm/185mm, spindle bore: 40mm, speed: 2800rpm, machine dimensions X/Y/Z: approx. 2000mm/1000mm/1700mm, weight: approx. 900kg. On-site inspection is possible. Gjdpfxewq R N Ds Afieuh

Year of construction: 2002, condition: ready for operation (used), A CNC multi-spindle lathe Index overhauled in 2020 is available. Number of spindles: 6, max. bar capacity: 32mm, spindle speed: 6300rpm, weight: approx. 10800kg, control: Siemens Sinumerik. Bearing condition measurement 2024 HS1: 14.35, HS2: 15.45, HS3: 10.37, HS4: 11.16, HS5: 17.44, HS6: 7.54. The machine has undergone extensive repairs to the spindles, cooling system, bearings, hydraulic lines, etc. Documentation available. Documentation available. On-site inspection is possible. Gujdpfx Afswr Dw Reish

Year of construction: 2013, condition: ready for operation (used), Turning diameter: 500mm, turning length: 1200mm, bar capacity: 102mm, travel X/Y/Z: 490mm/250mm/1210mm, speed: 5000rpm. Tool positions: 24, tool holder: HSK-A63. Machine dimensions X/Y/Z: approx. 5600mm/2600mm/2200mm, weight: approx. 10000kg. Documentation available. On-site inspection is possible. Gjdpfx Afjwm Npbeiouh