Used other lathes for sale (247)

Year of construction: 1984, operating hours: 42,591 h, condition: used, machine/vehicle number: 04054.01-807, Technical data: Ljdpfx Ajy Axzxoncjaa Distance between centers: 4000 mm Center height over flat bed: 400 mm Swing diameter over bed: 820 mm Bed width: 560 mm Carriage guideway length: 800 mm Cross slide width: 320 mm Top slide width: 200 mm Main spindle head: DIN 55022 size 11 Required floor space: Length: 7210 mm Width: 1815 mm

Condition: good (used), TERMOZ LYON Lajdpfx Aom Dtncjncea tour à repousse

Year of construction: 2014, condition: ready for operation (used), Three similar Tsugami Swiss-type CNC lathes are available. Years of manufacture: 2014/2016/2016, max. bar capacity: 32mm, max. machining length: 320mm, max. drilling diameter main spindle/counter spindle: 12mm/10mm, speed: 8000rpm, tool stations: 31, max. slot milling cutter diameter: 45mm, rapid traverse Z: 32m/min, rapid traverse X/Y: 24m/min, resolution: 0.1mm. Machine dimensions X/Y/Z: approx. 2150mm/1300mm/2050mm, weight: approx. 3500kg, control: Fanuc, operating hours 1/2/3: approx. 12265h/39970h/39470h. Documentation available. An on-site inspection is possible. Individual sale possible, however a package sale is preferred. Lasdpoyz An Hsfx Ancea

Condition: good (used), Machining diameter max: 36 mm Maximum spindle speed: 6300 rpm No. of Spindles: 2 Controller: Traub TX8i Toolchanger 1: No. of tools: 12 positions X-axis travel: 50 mm Z-axis travel: 50 mm Toolchanger fronside: No. of tools: 7 positions Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Laedpjtrvzxjfx Ancsa Max. diameter: 40 mm X-axis travel: 370 mm Z-axis travel: 250 mm Toolchanger backside: No. of tools: 5 Speeds: 150 - 3000 Rpm 300 - 6000 Rpm Max. diameter: 40 mm X-axis travel: 73 mm Barfeeder: FMB Turbo 5-42 Barlength: 3200 mm Bardiameter: 5 - 42 mm Country of origin: Germany Machine LxWxH: 3400 x 1300 x 1700 mm Machine weight: 4000 kg

Year of construction: 1975, condition: ready for operation (used), Offered is a precision lead and feed screw lathe: Center distance: approx. 1000mm, center height: 180mm, swing diameter over bed: 360mm, spindle bore: 35mm, spindle mount: D1-3 Camlock, spindle taper: MK5 (MT5), speed steps: 12 speeds, speed range: approx. 40-1800rpm, longitudinal feeds: 0.05-0.7mm/rev, cross feeds: 0.02-0.4mm/rev, metric threads: 0.4-7.0mm, inch threads (Whitworth): 4-56threads/inch. Inspection possible by appointment. Lasdpfjyzr Hxjx Ancoa

Year of construction: 1963, condition: ready for operation (used), functionality: fully functional, Swing diameter: 600 mm Turning length: 1000 mm Equipment: Laodpfx Ajyx Dtlsncoa - Three-jaw chuck Ø 250 mm - Four-jaw chuck Ø 250 mm - Live centre - Quick-change drill chuck MK5 - Documentation

Condition: ready for operation (used), Offered is a CNC vertical turning machine - pick-up system. Chuck diameter: approx. 160mm - 200mm, swing diameter: approx. 270mm, travels X/Z: approx. 500 - 600mm/approx. 160 - 200mm, max. spindle speed: 6000rpm, tool carrier: 12-station turret, drive system: Siemens SIMODRIVE 611, hydraulic unit: available, coolant system: including pumps and filter (One Eye Ind. magnetic filter installed), hinged belt chip conveyor. Inspection is possible by appointment. Laedpfxsyzh A Ao Ancsa

Condition: ready for operation (used), Year of construction: 1997, Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Lsdpfx Ajyzhazoncsaa

Year of construction: 2005, condition: good (used), All parts shown by hand not come. Laedpfx Aned N I Ezscsa VAT not included in price.

Condition: used, Year of construction: 2013, machine/vehicle number: 131116655, CNC lathe with accessories Ljdpjyxmn Esfx Anceaa

Condition: used, Year of construction: 2006, functionality: unexamined, machine/vehicle number: 66395, CNC lathe with accessories Laodpfx Asyxmkmjncea

Year of construction: 1976, condition: used, machine/vehicle number: 40 127 76, span the range of around: mit Spannfutter 115/48 (not available) 3 - 42 mm this maximum clamping: 345 mm Lodpfe Sxnpjx Anceaa span the range of around: mit Spannfutter 115/56 (not available) 5 - 50 mm this maximum clamping: 95 mm cutterhead speed: (RM 4) 740 - 1700/(ME 4) 580 - 1160 Upm spindle drive: 3 kW hydraulic drive: 4 kW space: Maschine 2100 x 1380 x 1880 mm weight: ca. 2000 kg

Year of construction: 2009, condition: ready for operation (used), A CNC flatbed lathe Optimum is available. Swing diameter over bed/slide: 280mm/170mm, center distance: 700mm, spindle bore: 27mm, speed: 4000rpm, travel X/Z: 165mm/660mm, feed X/Z: 2m/min/3m/min, tool stations: 4, quill stroke: 85mm. Machine dimensions X/Y/Z: approx. 2000mm/750mm/1550mm, weight: approx. 450kg, control: Siemens Sinumerik. Documentation available. An on-site inspection is possible. Lajdpfx Aoyyplioncea

Year of construction: 2003, condition: ready for operation (used), Three similar but not identical CNC sliding headstock automatic lathes Tornos including LNS bar loaders are available. 1) Lathe, axes: 9, spindles: 2, max. bar diameter: 10mm (one only 7mm), speed: 16000rpm, stroke: 66mm, machine dimensions X/Y/Z: approx. 1700mm/1050mm/2000mm, weight: approx. 1500kg, control: Fanuc. 2) Bar loader, bar diameter range: 1mm-12mm, loading capacity: 7mm/10mm: 36/24. Documentation available. An on-site inspection is possible. Individual sale of one lathe with associated bar loader possible by agreement. Lodpfxoyypmyo Anceaa

Year of construction: 2016, condition: ready for operation (used), Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible. Lasdpfx Aneyx H E Rjcsa

Year of construction: 1966, condition: ready for operation (used), An old Martin automatic lathe is available. Center height: 355mm, turning diameter over bed/slide: 720mm/515mm, faceplate diameter: 710mm, three-jaw chuck diameter range: 250mm-500mm, crank: 980mm, swing diameter: 1030mm, bed width: 530mm, speed: 1400rpm, quill diameter: 1150mm, max. quill travel: 280mm, max. workpiece weight: approx. 4000kg, weight: approx. 4900kg. Documentation available. An on-site inspection is possible. Lajdpfxsyx H H Ij Ancsa

Condition: used, spindle bore: 150 mm, spindle mount: MK 6, Conventional Lathe Brand: ECHEA Model: DN 500 Laedoyu Hyxopfx Ancea Serial no.: 4.075 Distance between centers: 6,000 mm Spindle bore: 150 mm Swing over bed: 1,000 mm Swing over gap: 1,300 mm Swing over cross slide: 980 mm Swing over compound rest: 780 mm Bed width: 670 mm Number of speeds: 24 (4–520) Morse taper in tailstock: 6 Hardened and ground bed. 400 mm gap in front of the chuck. Powered carriage. Includes 2 interchangeable carriages: - Tool post for conventional turning (tool post 280 x 280 mm, for tools up to 80 mm height) - Grinding attachment with 500 mm wheel and 10 HP motor – 1450 rpm Included: - TdG 3-jaw chuck 500 mm with outside jaws, inside jaws, and soft jaws - Grinding attachment for 500 mm wheel and 10 HP – 1450 rpm motor - Cable winder for powered carriage - Coolant tank with pump - 2 open steady rests with special non-seize pads, for approx. 250 mm diameters - 1 open conventional steady rest for approx. 200 mm diameter - 1 closed conventional steady rest for approx. 450 mm diameter - 23 grinding wheels for grinding attachment included, see photos.

Year of construction: 2000, condition: like new (used), Brand: IEMCA Model: CNC BOSS 542 / 44 Year 2000 Capacity: For bars from 5 to 42mm Lodpfeiqx Uyex Ancjaa Maximum length: 4400mm Hexagonal bar diameter: 4.4mm - 36mm Storage capacity: 28 bars of 10mm diameter Advance speed: 750mm/sec. Return speed: 800mm/sec.

Year of construction: 2024, condition: excellent (used), Axe & Status Tuscan LL550 X 6000 5-Bedway Heavy Duty Lathe With Fanuc Series 0i-TF Plus CNC Control (2024) Laedpfx Asyw Tkwsncsa Running Time 314 Hours. Swing Over Bed Ø950mm. Centre Height Approx 575mm. Distance Between Centres Approx 6,000mm. Carriage Type Box (2 Box Way), Carriage Width Approx 955mm, Cross Slide Width Approx 450mm, Bed Width 990mm. Axis Travel 'X'=480mm, 'Z'=6,000mm. Feed Rate 'X'=0-3,000mm/min, 'Z'=0-3,000mm/min. (2) 'FCG-32C' Ø800mm x Ø320mm Through Bore 4-Jaw Manual Chucks (Front & Back of Spindle). (2) SMW Autoblok 'K4 ZSW' Programmable Steadies, Range Ø52mm - 280mm. Headstock Spindle Nose A2-20. Spindle Bore Ø305mm. Spindle 'X' Axis Servo Motor 3kW, 'Z' Axis Servo Motor 7kW. Spindle Speeds 7-400rpm (Motor 30/37kW), Morse Taper 6. V12-200 Hydraulic 12 Station Turret, 32mm Tool Size, Ø50mm Boring Bar Holder Dimension. Motorised Tailstock Body Movement, Quill Ø165mm, Quill Travel 250mm, MT 6. S/No LL393806057 (2024). Electrical Specification AC220V/50Hz, 3 Phase. Automatic Doors & Full Cover Guard, Motorised Fondex Front & Rear Chip Conveyors, Auto Lubrication & 15-Bar Coolant System, Air Conditioned Electric Cabinet, Halogen Work Lights, Unimag DS-2030-30 Disc Type Oil Skimmer, Yong Teng E04-AL60 kVA Transformer, Plus: (2) Steel Cabinets: (1) 500mm x 500mm x 800mm With 6 Drawers & (1) 1,000mm x 700mm x 1,000mm With 6 Drawers, Full Range Of Machine Manuals, Ø800mm 4-Jaw Manual Chuck (Already Described In Original Detail) With Backing Plate & Spare Jaws, (11) Assorted C6 Capto Adaptors Including Boring Bar Holders, Tool Blocks & Facing Tool Holder,; Boring Bar Attachment (To Hold up to 150mm). Overall Dimensions Approx 8,470mm x 3,050mm x 2,370mm High; Weight Approx 20,500kg.

Condition: used, functionality: fully functional, Herbert 9C-30 Turret Lathe Type of chuck: 4 jaw Lasdpeyudgvjfx Ancoa Diameter over bed (Max): 762mm Diameter over cross slide (Max): 535mm Diameter in front of cross slide (max) : 737mm Length between chuck face & turret face (Max): 1505mm Travel of turret: 1066mm Diameter of hole through spindle: 125mm

Condition: ready for operation (used), lathe Colchester Master Lodpfed Hdqvex Ancoaa

Condition: new, Year of construction: 2025, operating hours: 40 h, functionality: fully functional, travel distance X-axis: 220 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, controller model: 828D, workpiece length (max.): 550 mm, workpiece diameter (max.): 400 mm, total height: 1,900 mm, total length: 3,010 mm, total width: 2,500 mm, rotational speed (max.): 3,000 rpm, overall weight: 5,000 kg, spindle speed (max.): 3,000 rpm, input voltage: 400 V, type of input current: AC, turning diameter: 400 mm, turning diameter over cross slide: 570 mm, bar passage: 87 mm, turning diameter over bed slide: 570 mm, turning length: 550 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, GEWA UT300 - Demonstration machine - Equipment: Control system: Siemens 828D Siemens drive components Centralized automatic lubrication system External enclosure Telescopic way cover Transformer Control cabinet Operator work area lighting Signal tower light LCD monitor Linear guides Servo tailstock Hydraulic chuck Sauter tool turret with 12 driven tools (BMT55) Renishaw tool measurement system Machine operating manual Pneumatic air gun Water gun Oil skimmer Laedpeyr A U Tjfx Ancea Chip conveyor and coolant tank This and other machines from GEWA Werkzeugmaschinen GmbH can be inspected at our facility in the Eifel region.

Year of construction: 1995, condition: ready for operation (used), A CNC compact turning machine Eguro is available. Turning diameter: 350mm, machining diameter: 200mm, turning length: 200mm, speed: 5000rpm, bar capacity: 1inch, travel X/Z: 250mm/250mm, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 1500mm/1500mm/1200mm, weight: approx. 1250kg. An on-site inspection is possible. Lsdpfx Asyv H Itjncoaa

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Lajdjyvuvxopfx Ancja

Condition: ready for operation (used), A conventional lead and feed screw lathe Antonio Anslemi is available. Center height: 260mm, center distance: 1500mm, swing diameter over bed/support/gap bed: 520mm/320mm/670mm, bed width: 370mm, speed: 1400rpm, tailstock quill diameter: 65mm, tailstock stroke: 240mm, machine dimensions X/Y/Z: approx. 3000mm/1200mm/1500mm, weight: approx. 2500kg. An on-site inspection is possible. Lodpfx Aeyvixuonceaa