Used other lathes for sale (255)

Year of construction: 2005, condition: used, functionality: unexamined, machine/vehicle number: 46787, 46787 Machining center for centric turning operations on crankshafts or shaft-like components with 2 independent machining spindles. Control: Siemens 840D Hodjzdpvgjpfx Apdsw Tool holder: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter: Ø700 in nominal dimensions – tools are not included, but can be acquired or newly manufactured for an additional charge. NC-controlled steady rest supports – without steady rests Retractable 3-jaw chuck on both sides, manufactured by Blessing Automatic loading door from above with a loading interface Dedicated chip conveyor with high discharge The machine can currently be inspected while powered on. Setup of components is possible after consultation and for an additional charge, including documentation of replacement parts and tools. Safeguarding of the control system and drives is included – delivery free to site. This is the machine base of a 1250mm machine; however, the usable length is limited to approximately 680mm between centers due to the main drive shaft. With a new main drive shaft, a length of over 1050mm would be possible. Year of production: 2005 Machine for centric turning operations of crankshafts or shaft-typical parts with 2 individual machining spindles Machine control: Siemens 840D Tool adapter: Heller turning broaching wheel 45 tool positions around the circumference Tool diameter Ø700 nominal – tools are not included and may be subject to a separate purchase or new procurement from the supplier. NC-controlled roller support – no workrest included Retractable 3-jaw chuck on both sides from Company Blessing Automatic gantry door for overhead loading and corresponding interface Individual chip conveyor with high drop Machine can be inspected while powered on upon request Setup of individual parts possible for a separate cost, including documentation of change-over parts and tooling Safeguarding of control and drives included – free location Machine base is DRZ1250 – effectively, on current driveshaft, limited to 680mm length; with a new driveshaft, it could be extended up to 1050mm.

Year of construction: 2008, condition: ready for operation (used), Offered is a CNC lathe (sub-spindle, milling/C-axis, Y-axis). Equipped with bar feeder for balls smaller 120mm and CNC singulation for balls larger 120mm, incl. Fanuc six-axis robot M-16iB with R-30iA control for automated loading and unloading as well as a bunker for raw material supply. Machine is operational. Inspection possible by prior arrangement. Hodsx Th Nmjpfx Apdow

Year of construction: 2008, condition: ready for operation (used), Main spindle: max. bar capacity: 65mm, draw tube bore: 75mm, collet holder diameter: 160mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 150Nm, nominal power (S1): 22kW. Counter spindle: draw tube bore: 45mm, centering chuck diameter: 175mm, spindle nose: 140mm, max. speed: 5000/min, nominal torque (S1): 100Nm, nominal power (S1): 16.8kW. W2 axis counter spindle: travel: 690mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X1 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z1 axis: travel: 220mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X2 axis: travel: 165mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Z2 axis: travel: 150mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. X3 axis: travel: 165mm, max. speed: 40m/min, max. acceleration: 10m/s², nominal thrust (S1): 2400N. Z3 axis: travel: 678mm, max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Y3 axis: travel: 80mm (+50/-30), max. speed: 30m/min, max. acceleration: 5m/s², nominal thrust (S1): 5000N. Workpiece unloading (UA-WA): max. unloading weight: 4daN, max. unloading diameter: 70mm. Total number of tool stations: 12, tool holder diameter: 30mm, driven positions: 12, max. speed of driven tools: 4000/min, nominal torque (S1-n = 0/min): 17Nm, nominal power (S1-n = 4000/min): 2.9kW, control: Siemens 840D, operator panel: ErgoLine, screen: color TFT 19 inch, number of spindles (C-axes): 2, number of axes: 10, number of channels: 4. Operating hours: 70,035h power on, 48,657h in production, machine operates with cutting oil. With documentation and Bar Loader FMB Turbo 8-80 XT 3200. An on-site inspection is possible. Hedpoyln Ekofx Apdjw

Year of construction: 2008, condition: ready for operation (used), A barely used cycle-controlled flatbed lathe Wagner with extensive accessories is available. Swing diameter over bed/face slide: 500mm/280mm, distance between centers: 1500mm, bed width: 350mm, speed: 3000rpm, travel X/Z: 295mm/1435mm, rapid traverse: 5m/min, positioning accuracy: +/-0.01mm, repeatability: +/-0.005mm, quill diameter: 75mm, quill stroke: 150mm, quill taper: MK5, machine dimensions X/Y/Z: approx. 3300mm/1700mm/1700mm, weight: approx. 3000kg, control: Siemens Sinumerik 802C base line, operating hours: approx. 1702h. Including various tools, coolant system, tool holders, 3-jaw chuck and several Parat tool holders. Documentation available. An on-site inspection is possible. Hodpjyit Ifofx Apdsw

Year of construction: 2016, condition: ready for operation (used), Swing diameter over bed/slide/bed bridge: 660mm/460mm/960mm, max. machining length: 300mm, distance between centers: 4000mm, turning length: 3680mm, bed width: 480mm. Spindle power: 15kW, torque: 1600Nm, speed: 2000rpm, travel X/Z: 316mm/3730mm, quill diameter: 105mm, quill stroke: 300mm, tool positions: 8, tool holder: VDI 40, chuck diameter: 500mm. Machine dimensions X/Y/Z: approx. 6700mm/2250mm/2300mm, weight: approx. 7200kg, control: Siemens Sinumerik 828D ShopTurn. Including additional 400mm three-jaw chuck, shims, hinged chip conveyor and working area enclosure. The lead screws of the X and Z axes were renewed in 2023. Documentation vorhanden. An on-site inspection is possible. Hjdpfx Apoyx H E Rodjw

Year of construction: 1987, condition: used, Schaublin 102N lathe Hodpfx Apjzlugyedjw

Year of construction: 2006, condition: used, Control voltage: 24V DC, rated current: 85A, connected load: 39kVA, rated power: 49kW, control-on operating hours: 32,779h, automatic operation 1: 5,040h, automatic operation 2 operating hours: 1,844h, production time: 33,731h, length: 3231mm, width: 2076mm, height: 1917mm, weight: 4.8t, with documentation, chip conveyor and FMB turbo 8-80 bar feeder. An on-site inspection is possible. Hjdpfx Apozuzzvjdjw

Year of construction: 2008, condition: used, Distance between centers: 1500mm, swing over bed/cross slide: 620mm/400mm, control: Heidenhain ManualPlus 420. The machine has been in daily single-shift operation since 2008. An on-site inspection is possible. Hedpfjzww Tgox Apdsw

Year of construction: 1982, condition: ready for operation (used), A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible. Hsdjydp Azepfx Apdow

Year of construction: 1984, condition: ready for operation (used), Control system: Philips B2T, machine currently not operational, partially dismantled, the fan of the main spindle motor has been completely renewed, the main drive and the mechanical assemblies (headstock, turret, ball screw) are intact, the Z-axis motor is defective and has already been professionally removed, the hydraulic clamping cylinder requires repair or must be replaced. An on-site inspection is possible. Hsdpfx Apoy Uyf Njdow

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Hsdpfx Apoyvuvxedjw

Year of construction: 1998, condition: used, A CNC lathe with bar feeder is offered. Equipped with an IRCO Breuning PROFImat bar feeder and KNOLL 400 S - 1/200 chip conveyor. Control: INDEX C200-4D / Siemens SINUMERIK 840C. Condition: in need of repair, maintenance required. Hoses and guide channels of the bar feeder are defective. The emergency stop currently cannot be reset. The oil pressure/air pressure switch trips the circuit breaker. Inspection possible by appointment. Hedpfx Apjz Hzdxjdow

Year of construction: 2003, condition: ready for operation (used), Swing diameter over bed/cross slide: 320mm/150mm, center height: 160mm, distance between centers: 750mm, max. turning length: 740mm, travel X/Z: 185mm/700mm, chuck diameter: 200mm, speed: 4000rpm, rapid traverse X/Z: 5m/10m/min, tool stations: 8, tailstock quill stroke: 120mm, tailstock quill diameter: 60mm, machine dimensions X/Y/Z: approx. 2300mm/1500mm/1700mm, weight: approx. 2000kg, control: Heidenhain. Documentation available. An on-site inspection is possible. Hjdpezdum Dsfx Apdsw

Year of construction: 2000, condition: used, A lathe with CNC control is offered. Equipped with three-jaw chuck, tailstock, tool holder, cutting fluid supply and machine enclosure. Control: HEIDENHAIN. Inspection possible by prior arrangement. Hsdjz Hn R Sopfx Apdsw

Year of construction: 1992, condition: ready for operation (used), A universal CNC cycle lathe Boehringer is available. Center height: 280mm, swing diameter over bed/cross slide: 570mm/365mm, turning length: 1000mm, distance between centers: 1500mm, quill diameter: 80mm, quill travel: 190mm, spindle speed: 2500rpm, bed width: 360mm, rapid traverse X/Z: 5m/min/10m/min. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2400mm, weight: approx. 4000kg, control system: Siemens. Documentation available. An on-site inspection is possible. Hedpfozcyqyox Apdow

Year of construction: 1989, condition: ready for operation (used), Spindle bore: 42mm, max. workpiece diameter: 115mm, speed: 3150rpm, power: 9kW, bar length: 5200mm. Machine dimensions X/Y: approx. 2100mm/1000mm, weight: approx. 1500kg. Including bar feeder Stamag D 5000 and various accessories such as collets and feed collets. Documentation available. An on site inspection is possible. Hedpfsxwn Ihsx Apdow

Year of construction: 2003, condition: used, Rated current: 60A, control voltage: 24V, connected load: 33kW, length: 2290mm, width: 1350mm, height: 1630mm, weight: 4.65t, operating hours: 78,439h, with documentation, chip conveyor and bar feeder. An on-site inspection is possible. Hodszuzz Aopfx Apdsw

Year of construction: 2023, condition: used, Workpiece length: 3000mm, swing over bed/carriage: 800mm/570mm, turning diameter without gap bridge: 1035mm, gap bridge length: 330mm, bed width: 400mm, travel X/Z: 420mm/230mm, max. spindle speed: 1600rpm, spindle bore: 105mm, spindle mount: D1-8, spindle taper: MT5, tailstock taper: MT5, tailstock quill diameter: 90mm, tailstock quill stroke: 235mm, main drive motor power: 7.5kW. Machine dimensions X/Y/Z: approx. 4740mm/1140mm/1910mm, weight: approx. 3870kg. Including measuring system. Documentation available. An on-site inspection is possible. Hsdpszxhlvofx Apdsw

Year of construction: 2019, condition: ready for operation (used), A simultaneous turning center Spinner with three turrets and extensive accessories, spare parts and tools is available. Travel X1/X2/X3: 180mm, travel Y1/Y2: +/-45mm, travel Z1/Z3: 704mm, travel Z2/E2: 620mm/720mm, rapid traverse X/Y/Z: 30m/min, acceleration: 0.5g. Spindle 1: Speed: 5000rpm, nose: A6, bore: 65mm, chuck diameter: 210mm, power: 18kW, torque: 115Nm. Spindle 2: Speed: 700rpm, nose diameter: 110mm, bore: 42mm, max. chuck diameter: 140mm, max. chuck jaw weight: 1.25kg, power: 16.6kW, torque: 100Nm. Turret 1/2/3: Turret stations: 3x12, speed: 8000rpm, tool holder: BMT 45, power: 4.3kW, torque: 13.6Nm. Machine dimensions X/Y/Z: approx. 2880mm/2130mm/1990mm, weight: approx. 7500kg, operating hours: 27102h, control: Fanuc 31i. Including loading magazine Top Automazioni, cooling/high pressure system with 80bar, chip conveyor, fire extinguishing system, a comprehensive tool package and other spare parts. Documentation available. On-site inspection is possible. Hjdpfoua E Trox Apdjw

Year of construction: 2017, condition: ready for operation (used), X-axis: 607mm, z-axis: 286mm, spindle speed: max. 6000/min, control: Fanuc 32i A, length: 4600mm, width: 1600mm, height: 2700mm, weight: 2.1t, operating hours: 34,536h. With automation FMB Unirobot LR MATE 200iD7L-P2TB, grinding spindle Jäger HF-Spindle, chuck MicroCentric 4-410-3-QC, MARPOSS measuring system with automated dimensional compensation, oil mist filter S400, belt filter Knoll KF110/500, hinged belt conveyor 320 S1 and other accessories. On-site inspection is possible. Hedpfx Aov Uz Akjpdsw

Year of construction: 2013, condition: ready for operation (used), A CNC slant bed lathe Focus is offered. Swing diameter over bed: 600mm, max. turning diameter: 330mm, max. turning length: 669mm, spindle bore: 88mm, spindle speed: 3400rpm, travel X/Z: 260mm/762mm, rapid traverse X-axis: 20m/min, rapid traverse Z-axis: 24m/min, tool stations: 12, tool holder: VDI40, quill diameter: 85mm, tailstock taper: MK4, controls: Siemens. Weight: approx. 5700kg, machine dimensions: X/Y/Z: approx. 3600mm/1800mm/1800mm. Inspection possible by appointment. Hedpfxozfaafj Apdsw

Year of construction: 2018, condition: ready for operation (used), Machining processes: drilling, turning, milling, axes: Z3 longitudinal slide tool turret, Z4 longitudinal slide tool turret, X3 cross slide tool turret, X4 cross slide tool turret, C1 workpiece drive, C2 workpiece drive, K5 turret swivel axis, K6 tool drive, K7 turret swivel axis, K8 tool drive, travel X3: 251mm, X4: 251mm, Z3: 662mm, Z4: 662mm, tool turret: 12-station radial, DIN 69880-VDI40, drive: DIN 5480-W20x0.8, tool swing diameter: 580mm, specified dimension at tool area: 320mm, length: 13,000mm, width: 7300mm, height: 4100mm, weight: 22t, operating hours: 14,748h. Equipment: OP012 control panel, Kuka handling robot, chip conveyor, coolant tank, hydraulics, pneumatics, electrical cabinet, parts infeed and outfeed, documentation, installation plan, working area diagram, gearbox plan and transport plan. The following components should be overhauled: machine bed (guideways/ball screws), motor spindles with release units (replace bearings/reseal), cross slides (guideways/ball screws/motor), workpiece spindle (replace bearings/reseal), protective enclosure (interior cladding/working area door/repaint machine), coolant pumps, replacement of electrical cables/lubrication and hydraulic lines, as required. An on-site inspection is possible. Hedpfoztducsx Apdow

Year of construction: 1984, condition: used, A CNC lathe is offered. Equipped with three-jaw chuck, tool turret and hydraulic unit. Control: TRAUB SYSTEM TX 8. Inspection possible by prior arrangement. Hjdpjz Hlxmsfx Apdew

Year of construction: 2004, condition: good (used), machine/vehicle number: 041115166, Offer 26312 Technical data: - Maximum swing over bed: 550 mm - Maximum swing over cross slide: 310 mm Hedpfx Apjzvna Uodsw - Turning length: approx. 1500 mm - Travel distances: - Z-axis: 1600 mm - X-axis: 300 mm - Spindle mounting according to DIN - Spindle bore: 82 mm - Taper of tailstock spindle: MK 5 - Travel of tailstock spindle: 150 mm - Spindle speeds: 80 - 3500 rpm - Rapid traverse rates X / Y - Drive power: 17 kW - Including: - CNC control: FAGOR - Hydraulic chuck - Electric handwheels - 8-position tool turret - Manual tailstock - Coolant system - Footprint: approx. W 4400 x H 2100 x D 2300 mm - Weight: approx. 4400 kg

Year of construction: 2005, condition: ready for operation (used), A lathe (Universal Turning Solution) is offered, control: Fanuc, tool turret: 12-station, tailstock, 3-jaw chuck. Tool setting arm: Renishaw HPRA. Inspection is possible by arrangement. Hodpfxex I Rpxe Apdsw