Used 4 Blades for sale (61,349)

Year of construction: 2011, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, We are selling a legendary Kronen GS-10 industrial belt slicer, perfect for fruit and vegetable processing. Equipped with a 4 mm slicing blade, 380 Volt, 5-pin plug. Excellent for continuous slicing of firm-fleshed fruits and vegetables. Unfortunately, it was not suitable for our strawberries, so we are selling it after purchasing it new in 2024 (purchase invoice available). Comes with all safety systems and CE certification. The machine's data plate is not available. Organic farm PODERE COLOMBARA DI GIULIA SERRAO (Imola, Bologna) Dcsdsyymprepfx Ailjn

Condition: like new (used), Year of construction: 2022, functionality: fully functional, power: 84 kW (114.21 HP), cutting height (max.): 450 mm, saw blade diameter: 630 mm, actuation type: electric, rotational speed (max.): 1,480 rpm, Walter 84kW Multi-blade saw Dimensions Length 3440 mm Width 1900 mm Height 1700 mm Cutting parameters Maximum diameter of the log to be sawn 450 mm Diameter of the circular saw 630 mm Minimum width of the center stack 60 mm Maximum number of saws per spindle 4 pieces 2 spindles, one on top and one on the bottom Motors Power of the motor for the lower drive 52 kW Djdpfx Ajz H T Ayeiljcn Power of the motor for the upper drive 41 kW Spindle speed 1480 rpm Infinitely variable feed rate 0–15 m/min (0–25*) Power of the motor for the feed drive 4 kW Additional equipment Log turner for rotating and positioning logs up to 6 m in length Side product separator for material up to 6 m in length

Condition: excellent (used), Year of construction: 2016, Thompson T400 BLADESTOP saw for sale. For more information, please contact me via email. Dodpsz Eiglsfx Ailjcn

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm Djdez A Tx Tjpfx Ailscn HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: excellent (used), Metal band saw blade, band saw blade, metal saw band -unused, original packaging -Number: 4 sheets available Dcjdeb A Hh Eepfx Ailen Price: per piece -Tooth pitch: 4 TPI -Dimensions: 5990 x 34 x 1.1 mm

Condition: used, functionality: fully functional, Raimann KS310 multi-blade saw with material handling system Max. cutting width: 310 mm Max. feed width: 650 mm Max. cutting height with multi-blade equipment: without pressure plate 120 mm, with pressure plate 105 mm Min. cutting height: 10 mm Min. workpiece length: 450 mm Dcjdpfsz Hi Swjx Ailjn Chain width: 340 mm Saw mandrel diameter: 65 mm Arbor diameter: 80 mm Diameter of circular saw blade: 250-360 mm Saw mandrel speed: 3900 rpm Feed speed, continuously variable: 4–45 m/min Main motor: 37 kW Outfeed table with side discharge and material return to the operator Technical documentation and CE certificate Dimensions: 640x370x180 cm (H)

Condition: used, Metal band saw blade, band saw blade -Condition: unused in original packaging -Number: 5x sheets available -Price: per piece -Toothing: 4/6 Dcodpfocud I Nsx Ailon -Dimensions: 2085 x 20 x 0.9 mm

Condition: used, Year of construction: 2021, Drilling capacity in St 60 55 mm threading in St 60 M 30 M 36 Short spindle MK 4 spindle stroke 140 mm Dsdpfx Aiez I Ub Hjlecn throat 300 mm column diameter 145 mm Machine table - usable table surface 615x430 mm T-Slots Amount - Width - Distance 2x14x224 mm distance spindle - column min./max. 150/735 mm feed 0,1 + 0,3 mm/U 0 stufenlos Spindle Speed 70-2.400 U/min. engine 3,0 kW machine weight ab. 380 kg Standard equipment: - 7" TFT LCD display with touch function: * Manual input of spindle speed set value * Actual speed display * Integrated drilling depth display with touch zero point transfer * Virtual drilling depth scale in the display * Machine status indicators and warnings on the display * Service information * Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Thread cutting device, for thread cutting with stop, max. 6 threads/min (thread cutting capacity depending on spindle speed), thread depth adjustable via depth stop and on the TFT LCD display (4 tools) - Infinitely variable speed adjustment via adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 V, protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 4545c, black Item 20.5 Foot switch in addition to the thread cutting device, for switching the direction of spindle rotation in the process. direction of rotation during the process Item 25. Coolant unit B, consisting of: separate container (33 l), pump with motor protection switch, complete armature motor protection switch, complete fitting Item 37.5 Technology calculator in the display The technology calculator guides you through the cutting task Determination of the cutting data using the following parameters: - Manufacturing process - Tool diameter - Cutting speed - Material table - Transfer function of the spindle speed as set value

Condition: good (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, total height: 1,450 mm, total length: 1,925 mm, total width: 1,400 mm, rotary table diameter: 800 mm, overall weight: 1,100 kg, height adjustment type: hydraulic, table load: 2,000 kg, product height (max.): 1,350 mm, workpiece weight (max.): 2,000 kg, Equipment: documentation/manual, foot remote control, Max. capacity: 2000 kg Table LxW: 800 x 800 mm Table rotation speed: 1.2–1.8 rpm Max. height with vertical table: 1350 mm Dedjz H Nufopfx Ailscn Featured with: - Manual controll - Footpedals - User Manuals Country of origin: Spain Motor power: 4 kW Machine (L×W×H): 1925 × 1400 × 1450 mm Machine weight: 1100 kg

Condition: excellent (used), Metal band saw blade, band saw blade Dedpob A Inwsfx Ailocn -unused: original packaging -Number: 6x sheets available -Price: per piece -Toothing: 4/6 -Dimensions: 4400 x 34 x 1.1 mm

Condition: good (used), Year of construction: 2007, operating hours: 130 h, machine/vehicle number: 208159, Size 36 x 52 cm, CP 2000, Alcolor dampening system, Baldwin cooling and recirculation unit, Autoplate, blanket washing system, roller washing system, impression cylinder washing system, Alphatronic powder spray. Dcedpfx Ajz Hm D Doilsn

Year of construction: 2015, condition: excellent (used), Ref: 11161 . 2015 Pack-Smart IPF 30-27-4 Integrated Finishing System Ideal for direct mail, gift card and security packaging, media packaging, tipping, windowing, folding, gluing and other specialist print-finishing applications. Equipped with: Rotary vacuum paper feeder Precision product alignment & registration Dsdez Iz Sfepfx Ailocn Dual servo-driven vacuum transport conveyors Twin-head hot melt glue system Servo-driven cold glue pattern system Scoring / perforating module Front fold tooling 3 x plow fold stations Turnover / straight-through module Transfer conveyor Shingled delivery conveyor 10-axis servo control system 10" colour touchscreen HMI Recipe storage & recall Integrated vacuum system Interlocked safety guarding Specification: Maximum production speed: 12,000 products per hour Maximum conveyor speed: 122 m/min Carrier size: 102–762 mm wide x 102–813 mm long Stock: 145 gsm up to 0.86 mm thickness Secondary rotary pick & place feeder Secondary product size: 54 x 54 mm to 150 x 150 mm Secondary feeder speed: up to 500 products/min Electrical: 230V / 3Ph Air requirement: 4.1–7 bar

Condition: used, Year of construction: 2007, Heidelberg, station BUH 66-4, year of manufacture 2007. Optional: window frame pocket + sensor, light barrier, and ACC 2.4 control unit. Dcsdpjz I Tzlsfx Ailsn

Condition: good (used), Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Dcsdpfx Asytg R Ijiljn Electronic control of all machine functions - Alphanumeric keyboard - Monitor LCD 9,5"- 800 storable programs - Free programming by the operator - Sequential work programs Suction port diameter mm 100/160 Overall dimensions mm 2250 x 1800 x 2050 h Weight kg 1800

Condition: used, Year of construction: 2016, Bystronic BySprint Fiber 3015 + ByTrans 3015 Extended – Laser cutting machine with loading and unloading system Working area: 3000 x 1500 mm Laser power: 4000 W - ByTrans 3015 loading and unloading system - ByVision CNC control with touchscreen - Handheld control unit - Fiber 4000 laser source - Cutting parameter assistant - Automatic nozzle cleaning - Automatic nozzle changer with 40 positions - Operator protection in the cutting area and loading/unloading area - Extraction system - Extraction device for sheet separation Dcedpfjz Itl Dsx Ailen - Compressed air connection - Year of manufacture: 2016 Included packages: - Material specification package - Package for part tolerances & cutting surface quality - Package for cutting gas supply & cutting quality

Condition: excellent (used), Year of construction: 1999, Double-sided, multi-purpose edge sanding machine with oscillation and 200mm sanding height. Langzauner LZK 4-S with veneer edge sanding side and solid wood sanding side. 200mm sanding width. Motorized sanding belt oscillation, therefore no compressed air connection is required. Drive motor 400V / 3kW. Front work table for sanding veneer edges with a grooved stop guide (for veneer overhang). Dsdpfx Aijz I T Apslocn Veneer sanding device with fine adjustment, foldable. Spring-loaded table, adjustable in height and can be positioned laterally. Angle stop. Rear, adjustable work table for sanding solid wood. Both tables are height-adjustable to utilize the sanding belt. Belt dimensions 3000 x 200mm. Lateral extension table for radius sanding on the 150mm belt roller. Feed stand holder 68mm. Central dust extraction port 140mm. Very stable frame with 2 swivel casters, 2 steering casters, and a locking brake. CE marking. All graphite pads and dust extraction hoses have been replaced. Original paint, only touched up in a few places. Excellent condition from a small restoration workshop. Some sanding belts are included. Dimensions approximately 1800 x 1000 x 1250mm (LxWxH). Weight approximately 650kg. The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration and are in stock in our warehouse; see "other offers from this provider."

Condition: used, Year of construction: 2009, Automatic central lubrication Milling unit 7833 2-stage, 11 kW power 1000 - 24000 rpm 1 double drilling spindle in X-direction 1 integrated sawing unit for sawing / grooving in X-direction, traveling Tool changer 7892, 16-way Linear Pick-up changer, permanently installed on the right-hand side of the machine Laser pointer consisting of 2 laser pointers for positioning the vacuum suction cups or tracing the workpiece contour Automatic console - suction cup positioning 6 consoles including 3 suction cup holders per console including 1 vacuum suction cup 80x80 mm per suction cup holder including 4 feeding aids Additional processing fields at the front for 6 consoles Basic unit pneumatics for frame clamping system 7974 (6 consoles) 2D barcode scanner Video camera in the processing head Vacuum pump 140 m³/h Vario tool Change changing unit package consisting of Consists of: Vector axis 7899 (C-axis), fully interpolating, 0-360° continuously rotatable, including pneumatic tool changer 7890, single-slot magazine pick-up system, permanently installed in front of the machine frame on the left. Tool changer 7894, 6-slot pick-up magazine specifically for Vario Tool Change tool holders, permanently installed in the machine frame on the left, can be equipped with a Vario Grip KSJ F 40 collet chuck, 3 Vario Grip KSJ F 40 tool holders (for 2-20 mm ER32 collets), 1 saw blade holder, 3 collets according to customer selection, 1 carbide circular saw blade, max. 220 mm diameter. Storage location: Nattheim Dodpfevvi Spex Ailjcn

Condition: used, functionality: unexamined, overall weight: 8 kg, total length: 390 mm, total width: 460 mm, total height: 270 mm, Ferwood Code: RU0008193 - Manufacturer Code: MDX61B-0110-5A3-4-00 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC LIGMATECH-HOMAG - If interested, we offer an overhaul service, please contact us. Dedoz Izk Uopfx Ailjcn

Condition: good (used), functionality: fully functional, Year of construction: 1995, Euromac corner notching machine with adjustable angle Type 220 4 Dcodpfsz I Ilxsx Ailen Capacity 220 x 4 mm

Condition: used, Year of construction: 2014, Behringer LPS 40-4 - Vertical metal bandsaw - Hydraulic band tensioning - Servo-controlled feed - Sturdy C-frame - Year of manufacture: 2014 Technical data - Working area (L x W x H): 4000 x 680 x 400 mm - Smallest cutting height: 10 mm - Minimum cutting width: 15 mm - Inner table support area: approx. 680 x 4000 mm - Inner table maximum load: 7500 kg - Outer table support area: approx. 680 x 4000 mm - Outer table maximum load: 9500 kg - Material support height: approx. 1385 mm - Cutting speed: 17 - 120 m/min - Saw band dimensions: 5400 x 54 x 1.6 mm - System/band tensioning pressure: 85 bar - Coolant capacity: approx. 250 l - Motor power - saw drive: 5.5 kW - Motor power - hydraulic pump: 2.2 kW - Motor power - chip conveyor: approx. 0.26 kW Dsdpfoz H Acpjx Ailocn - Connection value: approx. 11 kW - Voltage: 400 V, 50 Hz - Control voltage / hydraulic valve voltage: 24 V= (DC) - Current consumption: approx. 25 A - Fuse rating: 35 A - Conductor cross-section: min. 10 mm2 - Machine dimensions W x H x D: 6450 x 2870 x 2350 mm - Weight (net): approx. 10000 kg

Condition: used, Year of construction: 2020, Sled length: 3200 mm Cutting width at the rip fence: 1250 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 120 mm Scoring saw: yes Saw blade height adjustment: handwheel Saw blade swivel adjustment: handwheel Rip fence adjustment: manual Crosscut fence adjustment: manual Saw blade angle indicator: scale Cutting height indicator: - Rip fence indicator: scale Crosscut fence indicator: scale Saw blade diameter: 400 mm Speeds: 3 Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Machine width: 2200 mm Weight: 800 kg Dsdpfx Aiezq Dcuolocn

Condition: used, Year of construction: 2017, operating hours: 1,800 h, No. 3131 CNC machining center FORMAT-4 profit H10 22.43 Used, year of construction 2017 Operating hours approx. 1800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, feeding unit FORMAT-4 L-Motion and extraction unit FELDER RL 300 Technical data CNC machining center FORMAT-4 profit H10 22.43: Matrix table system made of phenolic resin Raster table with two stop rows Automatic central lubrication HARDWARE control computer Mobile control panel Handheld terminal for remote control of the axes Two vacuum pumps, rated output 2 x 250 m3/h Tool changer with 10 tools Tool changer on the left in the machine stand: 8 tool positions for HSK Milling spindle 12 kW (S6) HSK F63, 24000 rpm Central extraction via merged connections (D=250mm) Woodflash German software (H20/H08/H10/H50) Travel of axes H10 22.43: X= 5230 mm / Y= 2560 mm / Z= 280 mm Working field: X= 4300 mm / Y= 2160 mm / Z= 105 mm Axis positioning speed: X= 100 m/min / Y= 100 m/min / Z= 30 m/min Technical data feeding unit FORMAT-4 L-Motion: Year of construction 2017 In 2-axis version with 4 storage locations for feeding an H10 with lifting table Feeding the CNC Gentle transport Fully automatic panel handling Workpiece sizes: Length 2000-4200mm / width 600-2100mm / thickness from 8mm / panel weight 200kg Density: chipboard 650kg/m3 / MDF raw 750kg/m3 Dedpfx Ajrrh T Aeilocn Stacking height 1800mm Technical data extraction unit FELDER RL 300: Year of construction 2023 Nominal volume flow 6000 m3/h, H3 GS dust-tested, JET cleaning Compressed air connection 3/4 inch Connection pressure 7 - 12 bar with 40NL/min Operating pressure in the device 6 bar Chip container capacity 500 l Extinguishing device with powder extinguisher Dry fire extinguisher 12 kg Sale On behalf of customer, ex location Leipzig, without dismantling, without transportation and assembly Subject to errors in description and price Dismantling and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: "purchased as inspected" Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: used, functionality: unexamined, overall weight: 5 kg, total length: 260 mm, total width: 360 mm, total height: 210 mm, Ferwood Code: RU0009049 - Manufacturer Code: 4-008-39-1470 - Condition: Used - Functionality: Not tested - Compatible Machine: CNC HOMAG - WEEKE - If interested, we offer a refurbishment service, please contact us. Dcodpfx Aijz Izhajlen

Condition: used, functionality: fully functional, Used pallet racking from SSI Schäfer is among the most popular solutions for efficient and safe warehouse storage. This heavy-duty racking system is ideal for warehouses, industrial companies, and logistics operations that require robust and durable racking for storing Euro pallets. The proven PR600 design offers high load-bearing capacity, maximum flexibility, and is perfectly suited for storing heavy goods. Buying used here means: certified brand quality at a particularly attractive price – immediately available for new installations, retrofitting, or expanding your existing racking system. Customizable: The racking frames (Type P120) can be rebuilt to your desired height – professionally and precisely in our workshop. We provide made-to-measure racking solutions for every warehouse requirement. PRODUCT DETAILS - Height: approx. 9.85 m - Depth: approx. 105 cm - Length: approx. 10,100 cm - Shelf load: 3,000 / 3,500 kg (depending on version) - Bay width: 270 cm (3 × EPAL) - Beams: 270 cm, Type INP100 or CE110 (box profile) - Beam colour: Blue - Frame type: P120, galvanized, pre-assembled - Levels: Floor + 4 - Pallet spaces: 540 incl. floor spaces - Version: Used SSI Schäfer PR600 - Availability: Immediately available from stock, multiple sets in stock SCOPE OF DELIVERY: - 037 × frames approx. 9.85 × 1.05 m, galvanized, pre-assembled - 288 × beams approx. 270 cm (INP100 or CE110) - 576 × safety pins Dcodpfsz I Nd Aox Ailen Price: €11,844.00 net €14,094.36 gross You will receive an invoice with VAT shown separately. DELIVERY, INSTALLATION & INSPECTION: - Nationwide delivery across Germany via our partner shipping company – freight costs depend on postal code - Professional installation and dismantling by trained teams is optionally available - Racking inspections according to DIN EN 15635 by certified inspectors - Inspection of existing heavy-duty racks from other manufacturers also possible PLANNING & CONSULTATION: Our planning department will gladly prepare a non-binding quote tailored to your requirements. Whether new build, modification, or extension – we provide competent advice for your racking configuration. SHOWROOM: Visit us in our showroom! On site, you can get a comprehensive impression of our pallet racking, shelving, and other solutions. Many systems are assembled and ready to view. Our specialist advisors are available for questions and individual advice – we look forward to your visit! Haven’t found the right solution yet? Visit our website for a quick overview of many offers and product variations! INTERESTED OR HAVE QUESTIONS? Simply contact us by message or phone. You’ll find our phone number on our company page. ☎️ We are available by phone Monday to Friday, 08:00 - 16:00. Alternatively, send us a message with your name and number and we will get back to you as soon as possible.

Condition: used, Second-hand Raimann KS 310 BV multi-blade saw with splinter separator: Raimann ‘Spreiseltrennung 3000’ model and return conveyor. The machine has been fitted with a new chain. Expected to be available from June 2027 Technical data: - Engine: tba - Cutting width: tba - Cutting height: tba Dedpoz I S S Nofx Ailocn