Notching Machine

WMT 156/1.6

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Podpfouiy Nysx Amksgl Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm Pjdpjqvm Ukjfx Amkegl - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: new, Year of construction: 2026, Custom-Made Machines Tailored to Your Production Needs. Our custom-made machines are meticulously designed and engineered to meet the unique demands of your production processes. Whether your focus is finishing, oxide removal, or radius edge rounding, these machines deliver outstanding precision and performance. -Finishing: Achieve smooth, high-quality finishes on a wide range of materials, ensuring a consistently professional, polished appearance. -Oxide Removal: Effectively eliminate surface oxides to provide a clean, contaminant-free surface—essential for further processing or coating applications. -Radius Edge Rounding: Precisely round edges to your specified radius, enhancing both safety and the overall quality of your finished products. -Customization Options Each machine is tailored specifically to your requirements, offering flexibility in: Processing Speeds: Adjustable to match your varying production demands. Pgodpfshq Dbxsx Amkjl Special Features: Options include dust and fume extraction systems, adjustable pressure settings, and programmable configurations designed to optimize your workflow. Built for Durability. Constructed with longevity in mind, our custom machines are built to perform reliably through extended production cycles. Whether for small-scale projects or high-volume industrial applications, these machines provide exceptional results, year after year.

Condition: excellent (used), Year of construction: 1975, -KOM 1002-

 Offered here is a press of the company HYDRAP of the type HKPS8000. Technical data: Type: HKPS8000
 Pgedpfog Ufvbjx Amkel Year of manufacture: 1975
 effective stroke: 200mm throat: 250mm (at center) table size: 320x320mm Installation height: approx. 345mm Voltage: 380V 
Perm. load: 80000N
 Drive type: HYDR Drive power: 1,5kW Oil quantity: 60l Oil viscosity: 3°E

Condition: new, Year of construction: 2025, Sheet metal folder ZGR-3140/1.0 We have a new, high-quality folding machine of 3140 mm/ 1.0mm. This machine guarantees very high quality and agility of the work doing by the roofers. Our main task is the production of folding machines, with which we are concerned many years. The bending machine is equipped in degree scale, Romans screws, rear frame and gas struts. Directly from manufacturer! - max. working length 3140 mm - steel plate to 1.0 mm Podpfx Aochwa Dsmkogl - our machines bend both a copper sheet and aluminum sheet - the total weight of machine is 600 kg - the clearance between the lower beam (fixed) and the upper beam (pressed) of 80 mm - bending angle of 145 degrees - thickness of the bending beam of 20mm - new, full machine - delivery to the client - certificate CE - TAPPING ANGLE IS FREE !! Price excl. shipping We provide invoices with 0% of tax. Delivery every week :)

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Podpfx Aod Ixadsmkogl Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness steel (max.): 1 mm, number of blades: 5, working width: 1,250 mm, number of feed rollers: 2, FORSTNER MST 1250 Longitudinal Slitting and Sheet Cutting Machine The machine is in very good condition and fully operational. Designed for longitudinal slitting and cutting into sheets. It is currently connected - can be tested on site. Longitudinal slitting into 6 strips (5 pairs of knives), with the option to mount up to 7 pairs. Control – Siemens SIMATIC touchscreen panel. Full documentation (PDF) included. Specifications: Model: FORSTNER MST 1250 Made in: Austria Year: 2010 Working width: 1250 mm Pgjdpfex R Sk Nex Amkol Thickness: up to 1.0 mm Slitting knives: 5 pairs Shearing: circular shears Controller: Siemens SIMATIC panel If you have any further questions, we will be happy to answer.

Condition: new, measuring length bis 5700 mm Tube length 6000 mm numbers of toolholders 7 Rohr Edelstahl dimensions 6,0 x 0,3 x 0,2 m The length measuring system is available for retrofitting existing roller conveyors in lengths from 2 to 6 meters. The running rail made of rectangular tube 60 x 30 x 3. The steel measuring tape is self-adhesive. The magnifying glass with 6x magnification makes it easier to adjust the settings precisely desired length. Danger: This is just the stop system without roller conveyor! Pjdpfefv Atljx Amkegl

Condition: used, material width 300 mm coil weight 3 t material thickness 2 - 4 mm Straightener, 7 rolls, Make. Schleicher, Type RM 6-95/160 - band width 300 mm - band thickness 2 – 4 mm - cross cut 1200 mm² - voltage 220/380 V 50 Hz - total power requirement 3,1 kW coiler with press roll, Make Schleicher, Type H-3 - Coil weight 3 t - Band width 400 mm - voltage 220/380 V 50 Hz - total power requirement 3,92 kW Psdpfx Amecdrmmekogl without control

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Pgedorfx Utopfx Amkel Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.