Condition: not inspected (used), Year of construction: 1984, for milling grooves for shutters, operates double-sided Bdodpfoxuf E Eex Ab Tok

Condition: like new (used), Year of construction: 1998, operating hours: 7,000 h, functionality: fully functional, Manufacturer: KUPER Machine model/type: DZGB Year of manufacture: 1998 Machine category: Spindle Moulders (Under-Spindle) Location: Gorzów Wlkp. Delivery terms: Collection by customer Delivery cost: Covered by customer Commissioning: To be agreed Description / Notes: Under-spindle moulder for arches with lignum feed Manufacturer: KUPER Bdsdexufb Hspfx Ab Tjk Machine type: DZGB Model: 1350 Year of manufacture: 1998

Year of construction: 2023, condition: used, Used machine Year of manufacture: 2023, delivered in 2024 Condition: as new, machine is in original packaging and has not been commissioned Equipment and technical data: Infeed Table / Cross Conveyor: - Number of strands: 6 × Supergrip timing belts - Pitch: 650 / 650 / 850 / 1500 / 1500 mm - Length: approx. 1.8 m - Drive: geared motor, 1.5 kW - Minimum workpiece infeed length: 0.8 m - Function: Automatic transfer of raw material by lowering level to the infeed table Infeed Table: - Smooth sliding table with sliding plastic for damage-free feeding of raw material by servo pusher into the machining zone - Support width: approx. 200 mm BLOCKHAUS 4F-SERVO (main milling unit): - Machining dimensions: 140 × 200 mm - Maximum horizontal milling depth top: 60 mm - Maximum horizontal milling depth bottom: 35 mm - Maximum vertical milling depth: 95 mm - Milling spindles: Ø 30 mm - Horizontal milling tools: 2 × D = 220 mm × W = 120 mm - Vertical milling tools: 2 × D = 280 mm × W = 120 mm - Motor power: 4 × 4.0 kW - Feed: horizontal and vertical via SERVODRIVE, infinitely variable via software - Milling depth adjustment: spindle with digital counter - Workpiece clamping devices: vertical pneumatic, horizontal pneumatic - Extraction: below-floor hopper Ø 160 mm (pit by customer required) - Control: IPC / PLC / IITO software - Machine frame prepped for end tenon or dovetail milling, drilling unit and crosscut saw - Machine enclosure: fully closed, with swiveling safety hood (gas strut, viewing window) - Electrical control cabinet on base, cable carrier 3.0 m Option i (automatic milling depth adjustment for 4F milling unit): - Four additional NC-controlled servo axes for automatic positioning of the 4F tools - Control via IPC / IITO software - Function: automatic milling depth adjustment with ±0.1 mm tolerance - Extended machining capabilities: - individual grooves and millings on four component sides, - recesses and markings for window and door openings, - double and triple joints, - half corner joints (e.g. for top and bottom log beams) Bodpfx Abexavtko Todk Tools: - 2 × 3-piece groove cutter D 220 mm, width 21–65 mm, LM - 2 × 3-piece groove cutter D 280 mm, width 21–65 mm, LM - 1 × end tenon cutter D 240 mm × 20 mm - 1 × dovetail cutter D 40 mm, width 15 mm Combination End Tenon & Dovetail Milling Unit: - 3-axis milling unit for production of end tenons and dovetail joints - End tenon cutter Ø 240 mm × width 30 mm - Max. milling depth for end tenon: 40 mm - Dovetail width variable - Motor power: 4.0 kW - Speed: inverter-controlled, max. 4,500 rpm - Feed (DT.Y axis): SERVODRIVE, infinitely variable - Height adjustment (DT.Z axis): SERVODRIVE - Rotation adjustment (DT.R axis): SERVODRIVE - Workpiece clamping device: vertical pneumatic - Minimum beam thickness for longitudinal connection: 80 mm - Control: automatic via IPC / PLC / IITO software Horizontal Drilling Unit with Drill Guide (BGD SERVO): - Max. drilling diameter: Ø 30 mm - Drill Ø = 20 mm included in delivery - Motor power: 1.1 kW - Speed: 1,500 rpm - Feed: SERVODRIVE, infinitely variable - Height adjustment (Z axis): SERVODRIVE, digital counter - Workpiece clamping device: vertical pneumatic

Condition: excellent (used), Catalogue number 7248 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm Bjdjrf Tahspfx Ab Tsdk - max. tool diameter: 220 mm - worktable (length/width): 420x1010 mm - motor: 11 kW - 2 pneumatic workpiece clamps - extraction port diameter: 180 mm - dimensions (L/W/H): 1500x1010x1560 mm - weight: 689 kg ADVANTAGES – German manufacture – Used milling machine, in very good condition Net price: 31,900 PLN Net price: 7,590 EUR depending on exchange rate of 4.2 EUR (Prices may change in case of significant exchange rate fluctuations)

Condition: excellent (used), Griggio T45S angle milling machine! Diameter of the spindles 35mm Total height of the spindle 160mm Spindle speed variable on belts Spindle rotation: 3000/4500/6000/8000 Bdjdjrz Immspfx Ab Tjk 3kw main motor Manual lifting of the spindle Spindle height readout Spindle tilting at an angle of -5°+45° Ce certificate Weight 400kg

Condition: good (used), Year of construction: 2002, Robust swivel spindle moulder T 26, tiltable from -45 to +45 degrees, equipped with 2-axis positioning control Duocontrol Swivel spindle moulder with excellent features A treat for every Martin enthusiast! Pole-changing drive motor 5 / 6 kW with automatic motor brake Forward/reverse operation Swivel angle electrically adjustable from -45 to +45 degrees Height adjustment up to 150 mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is displayed on the top display and then set at the stop – enabling settings according to drawings Four speeds: 3,000, 4,500, 6,000 and 9,000 rpm Bdodpfx Abjvv H T Re Tjk Spindle diameter: 30 mm, quick-change spindle with torque wrench Electrically adjustable fence, infeed jaw adjustable by handwheel and SIKO counter Axes can be operated manually or automatically positioned for height and fence Fence with lift-away feature (for curved routing work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with pull-out workpiece support Support can be extended by 700 mm Table length approx. 2,400 mm Fold-down fence for insert routing Original Martin aluminium fence jaws with two ribs Aigner Centrex workpiece pressure device 3-roller feed unit HolzHer 1117, with 8 speeds, forward/reverse, new rollers Feed socket, switchable from the control panel Extraction outlets: 2 x 120 mm Compressed air connection: 6 bar Emergency stop switch Some parts of the machine have been newly painted Approx. 7,400 operating hours Operating manual CE mark Dimensions approx. 3,000 x 1,700 x 1,830 mm (LxWxH). Weight approx. 1,800 kg. The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse – see 'other offers from this supplier'.

Condition: used, Table dimensions 2500x 780 mm Bdedpfxoxpi D Ij Ab Tsk Motor output 7,5 kW Spindle diameter nach Bedarf mm reus 1.500 - 10.000 U/min

Year of construction: 1985, condition: excellent (used), Table: 1100X900mm, Bsdeiu Awxopfx Ab Tjdk 4 speeds: 3000, 5000, 6000, 10000 rpm, Spindle fi 50 5.5 kW motor 3 roll feed, Possibility to sell without feed at a lower price

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Features and technical data: - Automatic spindle height and tilt adjustment with decimal increments Bjdew I H Rqepfx Ab Todk - Mechanical display for spindle height and electronic display for spindle tilt - Tilting hood with aluminum guides - Adjustable table opening via table slides - System for quick tool change - With long tables featuring extendable workpiece support - Table size: 2500 x 780 mm - Spindle adjustment: -45° to +45° - Spindle diameter: 30 mm - Spindle stroke: 230 mm - Maximum table opening: 300 mm - Motor: 5.5 kW with automatic star-delta start - With forward/reverse rotation - Speeds: 3000/4500/6000/8000/10000 rpm - Electronic programming of spindle height, spindle tilt, and fence position (milling fence) - Extraction ports above and below 120 mm Dimensions: 2570 x 1450 mm Weight: approx. 670 kg Availability: short notice Location: Röllbach

Condition: excellent (used), functionality: fully functional, Catalogue number 7364 TECHNICAL DATA - max. workpiece height: 160 mm - spindle working length: 250 mm - spindle diameter: 40 mm - max. tool diameter: 220 mm - working table (L/W): 410x1000 mm - motor: 11 kW - 2 pneumatic material clamps - extraction port diameter: 160 mm - dimensions (L/W/H): 1070x1260x1400 mm - weight: 650 kg ADVANTAGES – Made in Germany – Additional set of cutters + copy template Bdsdpfx Asudif Tob Tok – Not repainted – Used milling machine, in very good condition Net price: 33,900 PLN Net price: 8,070 EUR according to 4.2 exchange rate (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Balestrini linear milling machine Bdedpjvt Aynefx Ab Tek Two milling units Milling height max 100mm Milling length max 1500mm Work on copiers Two feed speeds 4 pneumatic material clamps Milling unit motor power 2x4kw

Condition: good (used), Year of construction: 1999, functionality: fully functional, height adjustment type: electric, table height: 860 mm, table length: 2,000 mm, power: 75 kW (101.97 HP), table width: 800 mm, total height: 860 mm, type of input current: AC, total length: 2,000 mm, total width: 1,200 mm, spindle diameter: 30 mm, pivoting range: 45 °, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, overall weight: 920 kg, workpiece weight (max.): 1,060 kg, opening width: 370 mm, input voltage: 400 V, rotational speed (min.): 10,000 rpm, clamping height: 125 mm, rotational speed (max.): 10,000 rpm, Machine no: 128-29225 Type: TFS 2000 Built in 1999. Engine: 7.5 Kw Suva matic Bdedpjvn Rb Aefx Ab Tsk

Year of construction: 1989, condition: excellent (used), 4kW motor Bsdpfxeiu Awue Ab Tedk Spindle fi 50

Condition: used, Year of construction: 1984, Used machine Year of manufacture: 1984 Machine will be completely overhauled Bdedpfewka Sbex Ab Tjk Equipment and technical data: Table size: 1100 x 880 mm Pole-changeable drive motor: 5/6 kW Spindle speeds: 3000/4500/6000/9000 rpm Manual height adjustment: via handwheel Manual tilt adjustment: via handwheel Height adjustment of milling spindle: 110 mm Tilt adjustment of milling spindle: -5° to 45°; double-sided bearing Reversing switch for clockwise and counterclockwise rotation With 3-roller power feed unit Images show the machine in non-overhauled condition. Sale does not include Aigner table extensions visible in the images. Availability: by arrangement Location: Flörsheim

Condition: excellent (used), CATALOG NUMBER 6056 Bdodpfsgig Dyjx Ab Tek TECHNICAL DATA - Max workpiece height: 250mm - Spindle working length: 260mm - Spindle diameter: 40mm - Worktable (LxW): 630x360mm - Guide - Motor power: 9.3kW - 2 pneumatic material clamps - Extraction port diameter: 2x120mm - Air requirement: 8 bar - Dimensions (LxWxH): 1370x980x1620mm - Weight: 450kg – Unpainted – 2 cutters included – Italian-made – Used milling machine, in very good condition Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), Balestrini NOVA 3 envelope tenoning machine Bodpfx Asvkcfrsb Tjdk Main motors 2 x 2.2 kW Diameter of spindles 25 mm Spindles length 70 mm Spigot diameter 2 x 100 mm Automatic material loading and discharge Workpiece length min/max 199.5 mm / 2030 mm Thickness of workpieces 100 mm Width 90 mm

Year of construction: 1989, condition: good (used), • Length of milling 1400 mm • Max. Milling height 120 mm • Max. Width 450 mm Bsdpfx Aogqr Shob Tsdk • 30 mm spindles • Max spindle diameter 160 mm • Spindle revolutions 8400 / min • Dimensions 4100 x 2000 x 1600 mm • Weight without cabin 1600 kg • 2x 5.5 kw motors • Feed 1-15 m / min

Condition: excellent (used), Catalogue number 7450 TECHNICAL DATA - Max diameter of workpieces: 140mm - Min diameter of workpieces: 30mm - Installed bushing diameter: 70mm - 2-knife head - Arbitrary length of workpieces - Motor: 4kW - Dimensions (L/W/H): 700x500x1100mm - Weight: 100kg ADVANTAGES – Incl. 70mm diameter bushing – Used bevelling machine Bdjdouhfa Uepfx Ab Tsk – Very good condition – Used machine Net price: 5,900 PLN Net price: 1,400 EUR (depending on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Year of construction: 2018, condition: like new (used), Maximum milling height, mm 120 Maximum diameter of cutters, mm 250 Bjdpfx Aehlhgzjb Tedk Vertical stroke of the spindle, mm 120 Shaft rotation frequency 6000, 8000, 10000 rpm

Condition: new, Catalogue number: S0367 TECHNICAL DATA work table dimensions 800x800mm engine power S1/S6 3.0 / 4.4kW table hole diameter 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000rpm right, left rotation spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm exhaust nozzle diameter 120mm dimensions length/width/height 2800x1800x1090mm weight 410kg PRODUCT FEATURES Large, massive cast iron work table. Table hole diameter 190mm, with under-table exhaust. Electronic speed readout. Spindle protection for 180mm diameter. Spindle lock installed. 4 speeds. Spindle tilt forward ADVANTAGES – new machine – tiltable spindle – with side carriage – CE certificate Optional: – motor power 4.0 (5.5) kW (HP) – spindle protection for 250 mm contouring – integrated safety guides 350, 500 mm – table extension on the left and right side – spindle diameter 1 1/4, 32, 35, 40, 50 mm Bdodeu Atuxepfx Ab Tok The price includes the milling machine with a sliding side carriage. Net price: PLN 17,200 Net price: EUR 4,100 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, power: 4 kW (5.44 HP), Spindle 25mm Interchangeable spindle Overhead control panel 4 speeds 2800-4000-5000-8000 Bodpfxsqwgvdj Ab Tjdk 4kw motor

Condition: excellent (used), CATALOG NUMBER: 6607 TECHNICAL DATA Circular saw: - Maximum blade diameter: 350mm - Spindle: 30mm - Lockable spindle - Blade adjustable front/back, up/down - Blade guard - Motor: 1.1kW - Extraction port diameter: 80mm Spindle moulder: Tenoning spindle: - Spindle diameter: 40mm - Spindle working height: 140mm - Lockable spindle - Maximum cutter head diameter: 350mm - 2 spindle speeds: 3000 / 4500 rpm - Motor: 5.5kW - Brake - Side sliding table – manual feed - Table dimensions (L/W): 1180x600mm - Mitre fence - 2 pneumatic clamps - Extraction port diameter: 120mm - Overall dimensions (L/W/H): 2600 (for shipment 2000) /1600/1450mm Bdedpfx Ajh I N Sfjb Tok - Weight: 735kg – Very good condition – Used tenoning machine Net price: 13,900 PLN Net price: 3,300 euros depending on exchange rate 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7003 Technical Data: - Spindle diameter: 25mm - Spindle working height: 80mm Bdsdpfx Aew Emzrjb Tjk - Interchangeable spindle - Spindle locking - Height adjustable (up/down) - Original cast iron fence - 2 speed options + right/left rotation - Table dimensions: 1000x800mm - Motor: 3kW - Dimensions (LxWxH): 1280x860x1100mm - Weight: 465kg Features: – Bulgarian manufacture – Very good condition – Used milling machine Net price: 5,500 PLN Net price: 1,300 EUR (based on exchange rate of 4.2 PLN/EUR) (Prices may change due to fluctuations in the exchange rate)

Condition: excellent (used), Catalogue number 7340 TECHNICAL DATA - spindle diameter: 25mm - spindle working height: 120mm - exchangeable spindle - spindle locking - height adjustable up/down - original cast iron fence with full adjustment - 4 spindle speeds + right/left rotation - table dimensions: 1030x900mm - motor: 3.8kW - overall dimensions (L/W/H): 1030x1000x1080mm - weight: 614kg ADVANTAGES – manufactured in Poland – very good condition – used milling machine Bjdpew Em D Hofx Ab Tjdk Net price: 6,900 PLN Net price: 1,640 EUR depending on the exchange rate of 4.2 EUR (Prices may fluctuate due to exchange rate changes)

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm Bjdpfoq Tquzox Ab Tjdk - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)