Condition: used, functionality: fully functional, spindle diameter: 30 mm, table width: 1,070 mm, type of input current: three-phase, spindle speed (min.): 3,000 rpm, spindle speed (max.): 9,000 rpm, – very good condition – manufactured in Poland – DTR (Technical Documentation) – interchangeable spindle TECHNICAL PARAMETERS: – spindle diameter: 30 mm – working spindle height: 120 mm – spindle height adjustment – maximum tool diameter: 400 mm – four spindle speed settings: 3000 / 4500 / 6000 / 9000 rpm – spindle rotation: right / left – table dimensions: 1020 x 1000 mm Kedpfew Ip Dmjx Ah Nodg – auxiliary table dimensions (L/W): 500 x 445 mm – extendable table support to 570 mm – table height from floor: 890 mm – motor power: 5.5 kW – nozzle diameter: 2 x 120 mm – overall dimensions (L/W/H): 202 / 120 / 130 cm – weight: ~500 kg

Condition: used, hole spacing: 320 mm Kdodpfxovyq Tie Ah Neg stop length: 700 mm table size: 460 x 220 mm

Condition: used, Lot (approximately 30 pieces) of various cutters and cutter combinations, primarily from Leitz for MEC feed or without markings. mark: Without or MEC Kjdpfow U Ay Iex Ah Nsdg

Condition: used, chain width: 17 mm engine: 2,2 kW Rotatable: + - 45 ° Kodpfx Ahetunbuo Njdg Table swivel: + - 45 ° Further data: See PDF Lock case milling machine, door lock milling machine or chain milling machine / chain mortiser Framar type MC 60 for simultaneous milling of lock cases and drilling of door holes on doors and windows as well as many other possible uses. Chain width: 17 mm Motor: 2.2 kW

Condition: used, spindle diameter: 40 mm Kdodpfxew Uy Nae Ah Nog clamping length: about 170 mm

Condition: used, A rigid table milling machine or rigid milling machine Bäuerle type SFM for profiling and milling wood, equipped with a table extension and a feed device. Spindle ø: 30 clamping length: about 120 mm speeds (milling machine): 3,000/5,000/6,000/10,000 rpm Direction of rotation: Left and Right Kdsdpfxov Hf Uus Ah Neg

Condition: used, A Klein & Söhne rigid spindle moulder or rigid router for profiling and milling wood, equipped with an Aigner integral stop. Kdjdjwhc N Depfx Ah Nog Spindle ø: 30 mm clamping length: about 120 mm speeds (milling machine): 3,000/4,500/6,000/9,000 rpm Direction of rotation: Left and Right

Condition: used, Dovetail milling motor Hoffmann type UAD 33-F. Ksdpfxow Db H Ts Ah Nedg power: 1.000 W n: 33,000 rpm

Condition: used, Tool ø: Max. 200 mm Kdsdpfx Asr U Sqgjh Neg engine: 3 kW Compact table router Scheppach HF 3000 for profiling and milling wood.

Condition: used, Sword: 40 x 175 mm Technical data: 15 mm Kdjdpfx Ahslfdvyo Neg Technical specifications: for wedge holes swiveling: see PDF Chain mortiser or chain cutter Fezer KF 50 for mortising mortises.

Condition: used, Sword: 40 x 150 mm Kedpfxelfdx Rs Ah Nsdg chain width: approx.: 18-15 mm engine: 1,6 kW Chain milling machine / chain mortiser Bäuerle for milling out lock cases or other fittings with a swiveling table and swiveling milling unit.

Condition: used, Festo type ZA 2T tenon cutter for precise milling and sawing of tenon joints in solid wood, as well as for the production of windows and doors. The machine enables precise wood joints thanks to precise depth and length adjustment, with high repeatability. Ideal for window and door construction, as well as for traditional wood joints in furniture construction. Includes a set of Gold IV68 milling tools. Kjdpjwnmx Nsfx Ah Nsdg Milling cutter ø: max. approx. 340 mm cutting height: approx. 80 mm Travel: about 1,300 mm Further technical data: on demand Milling arbor: 40 mm

Condition: used, Spindle moulder, Type F - Year of manufacture: 1977 - 3, 4, 5, 6, 8, 10,000 rpm - Forward/reverse rotation - Spindle diameter: 30 mm - Clamping length: 140 mm - Wooden fence with fine adjustment, rotatable - Table size: 1200 x 800 mm - Weight: 700 kg Kodex E Dctopfx Ah Nodg - Equipped with Holz Her 3-roller power feed - MARGIN TAXED (differential taxation)

Condition: good (used), Year of construction: 1981, Manual height and swivel adjustment of the milling spindle Control panel on top Table size approx. 1100 x 760 mm Table height approx. 865 mm Motor power 4.7/5.7 kW Spindle speeds 3000/4500 / 6000/9000 rpm Height adjustment approx. 150 mm Required space approx. 1300 x 1100 mm Weight approx. 850 kg Further technical data available on request Kedpex Eyh Ejfx Ah Nodg All data taken from a brochure; therefore, all information is without guarantee.

Condition: used, Year of construction: 1981, Used machine Year of manufacture: 1981 Equipment and technical data: Kdsdpfewka E Ujx Ah Nog - with dual-lift spindle, pneumatic - mandrel diameter: 40 mm - with large table length: 2500 mm - with extendable frame support - with milling fence featuring Panhans metal jaws and fine adjustment Availability: short-term Location: Röllbach

Condition: used, Year of construction: 1963, Stationary milling machine Year of manufacture: 1963 Spindle diameter: 30 mm Availability: short notice Ksdpswka R Rsfx Ah Nodg Storage location: Röllbach

Condition: used, Year of construction: 1995, Used machine Year of manufacture: 1995 Features and technical data: - Spindle adjustment: -5° to +45° - Spindle adjustment: electric with digital display - Height adjustment: electric with digital display - Milling fence: with digital display - Spindle diameter: 30 mm (MK-5 taper) - Motor power: 11 kW - Speeds: 3,000 / 4,500 / 6,000 / 9,000 rpm - Table size: 1,340 × 800 mm - Table extension: on both sides, with extendable frame support - with 4-roller feed unit - with Aigner integral fence Dimensions: 2,540 × 1,350 × 1,850 mm Kedpfx Ahjxiztzo Njdg Weight: approx. 1,000 kg Availability: short notice Location: 63934 Röllbach

Condition: used, Year of construction: 1999, Table dimensions 1200x730 mm Motor output 5,5 kW Spindle diameter 30 mm reus 3000-4500-6000-7000-10000 U/min Weight 810 kg Kodpfx Ahexq Hiwe Nedg

Condition: used, Year of construction: 1996, fence ja ja /nein dimensions of machine 1000x1000x1300 mm Weight 800 kg Kdodpfjxq Hiqox Ah Njg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Weight 1100 kg Kdedpfx Ajv A Hyksh Nsg Total power requirement 4,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Total power requirement 5,5 kw Kdodpfsv A Hirox Ah Nog

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1240x710x1200 mm Weight 225 kg Kdedpjv A Hilefx Ah Njg Total power requirement 2,8 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Kdodpjv A Hifsfx Ah Njg Weight 530 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Kedsv A Hh Uspfx Ah Nedg Weight 600 kg Total power requirement 5,5 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Kedpfx Ahsv A Hh Ie Nsdg Total power requirement 5,5 kw