Used Tilting spindle moulders for sale (62)

Condition: good (used), Year of construction: 1998, A Hofmann swivel spindle moulder is for sale. Uqic9Ww0Kz The machine is in good condition

Condition: used, Year of construction: 2013, No. 04456 Spindle moulder Griggio T 45 i Used, year of construction 2013 Milling spindle swivels +/- 45° on both sides Brake motor 5,5 kW Manual swivel by crank Spindle height electrically adjustable Digital display for milling height and milling angle Long table 2600 mm x 750 mm LW Speeds 1500 / 3000 / 4500 / 6000 / 9000 rpm Max. tool diameter: Profiling 260 mm / Slotting 350 mm Clamping length 140 mm Milling protection and fence AIGNER Integral Arch milling hood CPS Extendable workpiece support CE-compliant Transport dimensions 2600 x 1200 x 1800 mm LWH Weight 750 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as viewed” Terms of payment: Prices plus VAT, payment before collection or dispatch Bxc3Uwure8 Terms of delivery: ex warehouse or location

Condition: excellent (used), Year of construction: 1999, Robust swivel milling machine T 26, swivels from -45 to +45 degrees Swivel milling machine with very good equipment A treat for every Martin fan Reinforced drive motor 7.5 kW with automatic motor brake and stepless speed control R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Speeds continuously adjustable from 1000 - 12000 rpm via frequency controller Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Comfort stop T226 with digital displays for total adjustment and individual inlet jaw, as well as input of the milling cutter diameter, the cutting depth is automatically calculated Stop with Lifting device can be swung away (for curved milling work) Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Aigner integral stop left 500mm, right 600mm K9Savrxc3 4-roller feed HolzHer 1112, with 8 speeds, R/L running, new rollers Feed socket, switchable from the control system Comfortable stand with electrically height-adjustable feed support, this can be swung away to set up the machine and can then simply be locked in place. Suction nozzle 2 x 120mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine have been repainted Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: used, Year of construction: 1972, machine/vehicle number: 2.1/213, Ausführung : starr Tischgröße : 1100x760 mm Tischhöhe : 870 mm Drehzahlen : 3000/4500/6000/9000 U/min Fräsdorndurchmesser : 30 mm Spindel rechts- linkslauf : Ja Drehzahlanzeige : optisch Ausführung Anschlagbacken : Aigner- Anschlagsystem Anschlagverstellung : manuell Vorschubapparat : Vegoma VS 38 mit 3 Rollen Cmvzj9R2Lm Schaltpultposition : unten Gewicht ca. : 650 kg Motorleistung : 4,5 kW

Condition: new, Year of construction: 2025, Martin T 27 Flex tilting spindle moulder - can be tilted on both sides - Flexibility for today and tomorrow. Setting up a tilting spindle moulder is normally a major challenge. Not on the T27 Flex with its modern touchscreen control: thanks to the integrated tool offset, you can set up even complex milling patterns with a tilted spindle in no time at all. Only in this way can the large swivel range of 2 x 46° be used efficiently - and you can fully follow your inclinations. In addition, the machine can be tailored precisely to the individual requirements of your business. Equipment: Bb0Jfrp2 T 27 Flex T 2711-a Digital display of infeed jaw position in the control unit T 2731-a Table extension on both sides + extendable workpiece support T 2740-a Centrex protection T 2742-a Integral fence incl. filling rod T 2790-La Console for feed stand attachment left The photo only shows an example machine / feed is not included Location: Comes to stock 54634 Bitburg - available in two weeks -

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, positioning guide with handwheels Aigner guides 3-roller feed CE B3Pnq3Bpbo year of manufacture 2002

Condition: excellent (used), spindle speed (max.): 10,000 rpm, spindle speed (min.): 3,000 rpm, worktable length: 255 mm, SCM T130 spindle moulder 4-roller feed included Tensioning trolley with clamp Culagi Aigner 7.5KW engine Adjustable speed on the inverter from 3000 to 10,000 rpm Manually adjustable spindle up and down Drfftf 40 mm shank Left-right rotation Machine weight 800 kg A very good milling machine from scm

Condition: new, Catalogue number: S0367 Jozyit TECHNICAL DATA work table dimensions 800x800mm engine power S1/S6 3.0 / 4.4kW table hole diameter 190mm spindle diameter 30mm spindle tilt 0° -45° spindle speed 1400 / 3500 / 6000 / 8000rpm right, left rotation spindle vertical travel 175mm spindle working height 125mm max. tool diameter for shaping / for tenoning 180/250mm exhaust nozzle diameter 120mm dimensions length/width/height 2800x1800x1090mm weight 410kg PRODUCT FEATURES Large, massive cast iron work table. Table hole diameter 190mm, with under-table exhaust. Electronic speed readout. Spindle protection for 180mm diameter. Spindle lock installed. 4 speeds. Spindle tilt forward ADVANTAGES – new machine – tiltable spindle – with side carriage – CE certificate Optional: – motor power 4.0 (5.5) kW (HP) – spindle protection for 250 mm contouring – integrated safety guides 350, 500 mm – table extension on the left and right side – spindle diameter 1 1/4, 32, 35, 40, 50 mm The price includes the milling machine with a sliding side carriage. Net price: PLN 17,200 Net price: EUR 4,090 depending on the price EUR 4.20 (Prices may change with higher fluctuations)

Condition: excellent (used), Year of construction: 2007, Robust swivel milling machine swivels from -45 to +45 degrees Tiltable milling machine with very good equipment A treat for every Hofmann fan Complete 3-axis positioning control for spindle height, spindle tilt and stop. Programs can be saved All three axes can be positioned. Adjustment of the single jaw with SIKU counter Swivel control panel at eye level for control Manual movement of each axis and positioning to the set target value Pole-changing drive motor 4.7 / 6.3 kW with automatic motor brake R/L run Swivel angle electrically adjustable from - 45 to + 45 degrees Height adjustment max. 125mm, electrically adjustable Six speeds 3000, 4000, 5000, 6000, 8000 and 10,000 rpm Spindle diameter 30mm Fence is adjusted electrically Electric spindle lock for tool change Table with table slide instead of table rings Planed machine table 2750mm long Extendable workpiece support at the front Cast fence jaws Aigner Centrex workpiece pressure device 4-roller feed Holzkraft, with 8 speeds, R/L run, new rollers Feed socket, switchable from the control unit Extraction socket 2 x 120mm Compressed air connection 6bar 2 emergency stop switches Original paint, partially repaired Operating instructions CE mark Dimensions approx. 2800 x 1350 x 1900mm (LxWxH). Weight approx. 1300kg. Dqng3F The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration in our warehouse, see "other offers from this supplier".

Condition: used, Year of construction: 1999, operating hours: 902 h, Functionality: fully functional, machine/vehicle number: 128-20116, table length: 2,000 mm, power: 7.5 kW (10.20 HP), table width: 820 mm, spindle speed (max.): 10,000 rpm, spindle speed (min.): 1,500 rpm, Swivel milling machine TFS2000 - Tegamatic Table size 2000 x 820 mm Table height 890 mm Milling arbor 30 mm Swivel range -15° to 45° Electric height adjustment Electric swivel adjustment Electric stop adjustment 9 speeds with frequency converter (1500/3000/4000/4500/5000/6000/8000/9000/10000) 2 suction nozzles 120 mm CENTREX protective device Machine socket for feed 4 roller feed Integral stop AIGNER 650/650 including accessories Kickback protection for insert milling Curved milling master Three-axis control with memory Bzano0Fkzs Control panel folds back

Condition: ready for operation (used), Year of construction: 1984, Hofamnn swivel milling machine Table size 1100 x 1000 mm Milling spindle 30 mm with right-left rotation with manual height and swivel adjustment Blm0Loq9Em technically OK

Condition: new, work table dimensions 2500 x 780 mm spindle DM 30 mm tilting of spindle +/- 45,50 Yry3Qg usable spindle lenght 140 mm Max. tool DM under table 300 x 80 mm suction DM 1 x 120 & 2 x 100 mm Motor elektrospindel 7,50 kW elektro spindel with inverter for speed 900 to 12.000 RPM control panel with mit "Easy Touch 7" program "Flex"- fence with autom. adjustment via 'Easy Touch 7' left right turning of spindle table elongation front INCL. OPTIONS: - "Fast” table with autom. adjustment via 'Easy Touch 7' control - version “LL” with 2 cast iron tables (2500 mm) Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Code: 0147 Brand: CASOLIN Model: F 45/L - CE Standard Automatic spindle moulder with tilting shaft - CE Standard Cdegslxe0 Technical data: Shaft tilting -10 +45 degrees Spindle diameter mm 35 Shaft worling length mm 180 Motor power Hp 7,5 Extended tables mm 2750 with support Electrically power driven of lifting and tilting Digital display for spindle moulder shaft Digital display for tilting Digital display for speed Suction connection diameter mm 120 Work table height mm 860 Overall dimensions mm 2750 x 1180 x 1500 h Weight kg 1100

Condition: used, Motor power: 10.0 PS/HP (7.35 kW), milling unit with controlled height and angle adjustment, milling spindle lock from outside, max. milling cutter diameter 250 mm, table size 1160x770 mm, milling stop rail set INTEGRAL Bgwuxpaix3

Condition: good (used), Functionality: fully functional, SPINDLE MOULDER with tilting spindle model SCM T160 L’Invincibile second hand machine spindle tilting by electric -5 ° / + 45 ° Bphgshciwo spindle lifting by electric motor power Hp 5,5 shaft diameter mm. 50 volt. 380/50 weight kg. 1000

Condition: good (used), Year of construction: 2002, Robust swivel milling machine T 26, swivels from -45 to +45 degrees with 2-axis positioning control Duocontrol Swivel milling machine with very good equipment A treat for every Martin fan Pole-switchable drive motor 5 / 6kW with automatic motor brake R/L running Swivel angle from - 45 to + 45 degrees electrically adjustable Height adjustment max. 150mm, electrically adjustable When adjusting the height, the correction factor for the swivel angle is shown in the upper display, which is then set at the stop, so settings can be made according to drawings Four speeds 3000, 4500, 6000 and 9,000 rpm Spindle diameter 30mm, mandrel-fix quick-change spindle with torque wrench Electrically adjustable stop, inlet jaw adjustable with handwheel and SIKO counter Manual operation of the axes or automatic positioning of the height and stop Stop can be swiveled away with lifting device (for curved milling work) Table opening via eccentric table rings, electrically adjustable Table extension right and left with extendable workpiece support Support can be extended by 700mm Table length approx. 2400mm Foldable stop for insert milling Original Martin aluminum stop jaws with two bars Workpiece pressure device Aigner Centrex 3-roller feed HolzHer 1117, with 8 speeds, R/L running, new rollers Feed socket, can be switched from the control system Extraction nozzle 2 x 120mm Compressed air connection 6 bar Bfhtw7Jq83 Emergency stop switch Some parts of the machine have been repainted Approx. 7400 operating hours Operating instructions CE mark Dimensions approx. 3000 x 1700 x 1830mm (LxWxH). Weight approx. 1800kg. The machine can be demonstrated on site by appointment. We only offer machines that are in our warehouse ready for demonstration, see "other offers from this provider".

Condition: used, used, good conditionMake FrommiaType 705 P1MachineNo. 119mobiletiltable from 0 to 45°motor 2 speeds/polarity reversible6 speed levels 2500/4500/5000/6000/9000/12,000 rpmright-left rotationtable size 1000 x 900 mmmilling arbor diameter 30 mmmilling fence with fine adjustmentsuction connection D 120 mmspace requirement approx. 1000 mm x 900 m x 1200 mmWeight approx. 400 kgStorage location 97447 Gerolzhofen, free loaded, unpackedHandover in as-is condition as inspectedwithout guarantee and warranty Dq9Hep

Year of construction: 2023, Condition: new, Stable cast iron construction Milling spindle can be swiveled backwards from 0° to -45° Right-left rotation of the milling spindle Generously dimensioned milling unit made of cast iron, attached directly to the table Solid and precise cast iron table Standard curved milling protection hood Aluminum sliding carriage ball contact system Torsion-resistant, highly precise, smooth-running and problem-free in daily use 10-year SCM guarantee on wear of the guideways Pxfp33 Milling spindle mounted high up with precision ball bearings, resulting in the lowest possible bearing load and the longest possible service life Exact router fence with quick adjustment and fine adjustment with a scale on the stop jaw Integrated suction connection Large milling table opening allows the use of larger tools Weight approx. 290 kg Extraction connection diameter 2 x 120 mm Working table L x W = 1000 x 435 mm Table height 900 mm Sliding carriage length 1000 mm Sliding carriage width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle inclination 0 to -45 ° Spindle usable length 100 mm Overhang max. above table 130 mm Spindle speeds 3500/7000/10000 rpm Mandrel diameter 30 mm Tool diameter max. lowerable 180 mm

Condition: used, Year of construction: 2003, Functionality: fully functional, Work table dimensions 1,200 x 730 mm Spindle tilt -10 + 45 Max. clamping height on spindle 140 mm Max. tool diameter tool diameter 250 mm Max. diameter for tool lowering under table 300 x 130 mm Spindle speed 3300/4400/5600/7500/10000 rpm. Extraction nozzle on fence and rear stand, diam. 120 mm Pneumatic working pressure, min. 6 bar Main engine 7.5 HP, 5.5 kW Dq3God For further information about technical data. Contact us

Condition: excellent (used), Scm Samco T40I spindle moulder with trolley and 3-roller feed Technical data: Spindle tilt +5° to -45° mm Spindle diameter 30 mm Engine speed 1,400, 3,50,000 rpm Voltage 400 V Dq29Ov Working height 900 mm Engine power 3kW 3-roller feed Year of production 1996 Machine fully functional Very good condition

Condition: used, Year of construction: 1991, Table dimensions 2550x800 mm Motor output 11 kW Bi2Nolodkk Spindle diameter 30 mm Weight 1000 kg Year 1991 used, top conditionmake Panhanstype 240year of construction 1991Masch.-Nr. 322GS-wood dust testedmotor boosted 11 kWswiveling from -5 to 45°motorized brake4 speed levels 3000 / 4500 / 6000 / 9000 ht-left-runningtable size 2550 mm x 800 mmtable top extension approx. 2500 mmFrame support extendableMilling arbor diameter 30 mmCast iron fence jawsMilling fence with fine adjustmentElectrical height / swivel adjustmentDigital displays for swivel angle - spindle heightSocket for feed unitSuction connection 120 / 120 mmSpace requirement approx. 2550 mm x 1400 mm x 1200 mmweight approx. 1000 kgstorage place 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty

Year of construction: 2023, Condition: new, spindle moulder with tillable spindle guaranteed quality at your finger tips - easy-to-use the operator easily adjusts all movements due to a hand wheel with mechanical decimal readouts located on the front of the machine. spindle speed readout via LED's left right turning of spindle spindle moulder fence with manual adjustment machine in version 'LL' with left and right table elongation (2500 mm), pull - out work piece support and emergency stop button carriage on work table for tenoning works incl. fence and work piece clamp incl. feeder unit STEFF 2048 4 rollers 8 speeds work table dimensions 1200 (2500) x 855 mm Mbyap spindle DM 30 mm usable spindle lenght 125 mm max. tool DM under table 240 x 80 mm suction connection DM 2 x 120 mm motor 5,5 kW INcL. OPTIONS: version 'LL' with long cast iron tables (2500 mm) & pull out work piece support in front fence with hand wheel adjustment and numerical read out machine dimensions L x B x H = 2500 x 855 x 900 weight approx. 500 kg Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: new, - NEW -description- Stable cast steel construction- Milling spindle can be swiveled backwards from 0 ° to -45 °- Three spindle speeds from 3500 - 10000 rpm- As standard with right-left rotation of the milling spindle- Large-sized milling unit made of gray cast iron,attached directly to the table- Solid and precise gray cast iron table- Quick and easy speed change- Powerful 5.0 kW industrial motor- Standard curved milling protection hoodEquipment detailsAluminum sliding carriage- Equipped with a thousand times tried and testedBall contact system- torsion-resistant, extremely precise, smooth-running andproblem-free in daily use- 10 year Holzkraft guarantee on wear and tearof the guidewaysGray cast iron milling unit- Attached directly to the router table- Milling spindle mounted high up with precision ball bearings,thus the lowest possible bearing loadand the longest possible service life- 3 milling speeds from 3500 to 10000 rpmPowerful engines- Equipped with a powerful three-phase motorMilling protection- The milling protection is standard for maximum safetywith a height-adjustable guide railand ling stop- Exact milling stop with a quick adjustmentand a fine adjustment with a scale on the stop jaw- The integrated suction connection ensures a clear viewRouter table opening- A large router table opening also enablesthe use of larger flattening cuttersand tenoning and slotting toolsabove and below the tableArc milling protection hood- Included as standard in the scope of deliveryReversible stop jaws- Versatile integrated stop for bridgingthe tool gap- Allows you to work safely withnarrow workpiecesTechnical specifications:Dimensions and weightsWeight (net) approx. 290 kgConnection suctionExtraction nozzle diameter 2 x 120 mmWork tableWorking table length 1000 mmSlide length 1000 mmWorking table width 435 mmSlide carriage width 270 mmTable height 900 mmInstallation informationRequired space length 1945 mmMachine body width / depth 710 mmRequired space width / depth 2220 mmWorking area length 1600 mmExplanation of space requirementsThe dimensions take into account maximum travels or useful king area width / depth 1600 mmMachine body length 1000 mmExplanation of the work areaPlease add the specified dimensions with the space required in order to obtain the free installation area recommended for the ctrical dataConnection voltage 400 VMains frequency 50 HzPhase (s) 3 PhDrive motor power 5.0 kWType of current ACMilling spindleSpindle inclination 0 to -45 °Spindle speed (s) 3500/7000/10000 min¯¹Usable length of the spindle 100 mmSpindle mandrel diameter 30 mmSpindle overhang r table 130 mmMilling tool diameter l diameter can be lowered 180 mmTool diameter max. Tenon milling 275 mmTool diameter file milling 210 mmscope of deliveryArc milling protection hoodAnodized aluminum sliding carriageTelescopic miter fenceAluminum stop jawsItem No. 5502045 Bginkeinpc

Condition: used, with spindle adjustment depth in the tablesecond handMake SchneiderType SK2 / 8SMachine no. 80002Motor 4.5 / 5.5 kWmotorized brake electronically6 speed levels 3000/4000/5000/6000/8000/10000 ht-left runMilling arbor diameter 30 mmTable top extension approx. 2 x 450 mmMilling fence with fine adjustmentControl panel aboveSocket for feederExtraction connection D 100/120 mmRequired space approx. 2100 mm x 1300 mm x 1800 mmTotal connected load 5.5 kWStorage location 97447 Gerolzhofen, free on truck, unpackedHandover in the current condition as viewed,without guarantee and warranty Bgh8Njpfkc

Condition: used, Year of construction: 1990, used, good conditionMake Panhanstype 240Year of construction 1990Machine no. 212Motor boosted 11 kWswiveling from -5 to +45Speed levels 3000 / 4500 / 6000 / 9000 ht-left runTable size 1350mm x 800mmTable top extension approx. 600/2400 mmFrame support extendableMilling arbor diameter 30 mmcast stop jawsMilling fence with fine adjustmentElectric height adjustment, tiltingDigital displays for swivel spindle spindle heightPower socket for feederExtraction connection D 2 x 120 mmSpace requirement approx. 2500 mm x 1300 mm x 1300 mmWeight approx. 1100 kgStorage location 97447 Gerolzhofen, freely loaded, unpackedHandover in the current condition as seen,without guarantee and guarantee Dq7329