Spindle moulders with tiltable spindle

WINTER SF-45 MINI

Condition: new, Year of construction: 2026, Combined saw-milling machine minimax st 3c F 16 Swiveling saw blade, swiveling milling spindle and format sliding carriage made of anodized aluminum Sturdy cast steel construction Large support surface and precise cast table High-precision sliding carriage made of anodized aluminum (travel 2250 mm) Large trimming frame (900 x 600 mm) with telescopic aluminum fence extendable up to 2660 mm with professional stop flaps Rodohp Rdljpfx Ahzebt Max. Saw blade Ø 315 mm with scoring device, tiltable from 90° - 45 Saw parallel fence with fine adjustment Stable saw unit and large dimensioned double cradle milling unit guarantee highest stability, precision, smooth running and long service life Solid and precise machine table made of stress-free gray cast iron Three milling speeds, manually adjustable from 3500 - 10000 min-¹ With right-left rotation of the milling spindle Standard arc milling protection hood Safety turning stop jaws made of aluminum Two motors with high power reserves Two plug-in handwheels for convenient and quick operation Dimensions and weights Weight approx. 470 kg Connection suction Suction port diameter 2 x 120 mm Suction port diameter saw blade guard 60 mm Electrical data Power drive motor 2 x 5,0 kW Supply voltage 400 V Mains frequency 50 Hz Milling spindle spindle inclination 0 - -45 ° useful length of spindle 100 mm spindle speeds 3500/7000/10000 min-¹ Milling tool diameter max. not lowerable 210 mm lowerable 180 mm tenon milling 275 mm K

Condition: new, bore capacity in steel (diameter) 32 mm throat 320 mm bore stroke 160 mm spindle taper MT 4 MK table: 500 x 420 mm column diameter 120 mm Rbedpfx Asfv H H Hehzjt turning speeds 85 - 1800 U/min feeds 0,1 - 0,2 - 0,3 mm/U total power requirement 0,85 / 1,5 kW weight of the machine ca. 500 kg. range L-W-H 965 x 515 x 1920 mm

Condition: used, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL Type AZP Curtain-sided low loader, low-loader trailer, low loader for machine transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Unladen weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Loading height under tarpaulin frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear wing doors at drop side height Rbodpfjt N Antex Ahzet - Tarpaulin frame with EDSCHA roof system - Tarpaulin frame designed for easy removal (can also be used with the frame removed and the tarp pushed forward) - Spare wheel mounted on the front wall - Independent lifting and lowering of front and rear axles - Middle axle with lift function - Drawbar – extendable in multiple stages - Heavy-duty lashing rings on the outer frame and in the vehicle centre - ALU drive-on ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The trailer was purchased new by us and is therefore first-hand. The trailer has been deregistered since 2025.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: KK052469, Connected load 380V 4kW table size 1070 x 620 mm swiveling with hand crank 45 height adjustment with hand crank right/left rotation motor brake socket for feed unit Protective covers for hand milling spindle Ø 30 mm Aigner stop Rodpfx Aoiinm Hshzebt suction connection 2x 120 mm speeds: 1400/3500/6000/8000 rpm Instruction manual

Condition: new, Holzkraft minimax t 45c table router (5502044) Low-priced, with rigid milling spindle and cast iron work table. - Sturdy cast steel construction - With rigid milling spindle - 3 spindle speeds 3500 to 10000 min¯¹ - Milling spindle with right-left rotation - Large dimensioned milling unit made of grey cast iron, directly fixed to the table - With suction hood under the worktable for better extraction - Solid and precise cast iron table - Quick and easy speed change - Powerful motor with 5,0 kW - Standard arc milling protection hood - Quality Made in Italy Equipment details Cast iron milling unit - Directly mounted on the milling table - Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life - 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors - Equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence - Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. - The integrated suction connection ensures a clear view Milling table opening - A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Curved milling protection hood - Included as standard Reversible fence jaws - versatile integratable stop for bridging the tool gap - enables safe working even with narrow workpieces Accessories HOLZKRAFT safety system fence jaws, adjustable - Optimum protection on every router table, individually adjustable to the task at hand - Universal basic elements for mounting AIGNER safety and working devices - Quickly adjustable due to simultaneous clamping of all individually adjustable rods - Made of high quality aluminum - Can be used universally on all HOLZKRAFT table routers - 500 mm: Item no.: 5851000 - 650 mm: Item no.: 5851650 TECHNICAL DATA Dimensions and weights Weight (net) approx.: 240kg Suction connection Suction port diameter: 2 x 120mm Work table Working table length:1000mm working table width: 575mm table height: 900mm Set up information Required space length: 1945mm Required space width/depth: 920mm Explanation of space requirements: The dimensions take into account maximum travel distances or useful lengths. Machine body length: 1000mm Machine body width/depth: 575mm Working area length: 1600mm Working area width/depth: 1600mm Explanation of working area: Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage: 400V Mains frequency: 50Hz Power drive motor: 5,0kW Milling spindle useful length of the spindle: 100mm spindle protrusion max. over table: 130mm Spindeldrehzahl(en): 3500/7000/10000min¯¹ spindle arbor diameter: 30mm Milling tool diameter max. Tool diameter max. lowerable: 180mm Tool diameter max. profile milling: 210mm Rbsdekyt Ulopfx Ahzot SCOPE OF DELIVERY - arch milling protection cover - aluminum stop jaws Holzkraft dealer - accessories available on request!

Condition: used, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW SALVAMAC LEGEND 500 – The semi-automatic under-table cross-cut saw ----- ----- Maximum cutting area: 220x125/ 260x100/ 285x80/ 310x50 mm. When sawing stacked boards h max. 100 mm. The structure is made entirely of thick-walled and reinforced throughout painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cutting control in ergonomic position. Rjdpfxsv Uq Tlo Ahzebt Engine power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balance and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different Types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using innovative ball bearings with double dust protection and automatic lubrication system. CE-compliant electrical system. The CE models must come with it as standard At least 1 meter long support plates/roller tables must be provided at the inlet and outlet. Technical data: ----- Saw cross section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 5 Nl Intake port: 1 x 120 mm / 1 x 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50 Hz, 3 phase Worktop height: 900 mm +- 20 mm Color: Ral 7035 Machine additionally equipped with: ----- 2 m infeed table (right of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. load capacity 230 kg, Diameter 60 mm, distance 250 mm, width 320 mm. The space between the roles is enclosed in painted steel. Including lateral guidance. 2 m outfeed table (left of the saw) with unpowered rollers: Painted steel frame with galvanized wheels. Load capacity 230 kg, diameter 60 mm, distance 250 mm, width 320 mm. The space between the rollers is of enclosed in painted steel. Includes side guide, stop guide and millimeter scale. 2 pieces of strong pneumatic stops with a width of 200 mm ----- Total price ex works: on request! ----- Image and video not original, show identical model Further options such as longer inlet/outlet, stop systems on request! (technical data according to the manufacturer without guarantee!)

Condition: new, Year of construction: 2025, This machine is a powerful, precise and universal device in a compact body, created for all workshops, furniture manufacturers and carpenters looking for a powerful machine. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Precise saw cutting and height adjustment through a knob Parallel guide with microadjustment Table ground, made of cast iron with expansion capability Stable, uniform table saw design, intended for any carpentry work Integrated side table provides great cutting capabilities Technical data Maximum saw diameter 254 mm Saw speed 4000 rpm Saw tilt range 90–45° Redovxhlgjpfx Ahzjbt 45º maximum cutting depth 50 mm 90º maximum cutting depth 80 mm Worktable dimensions 350×800 mm Movable table dimensions 240×1320 mm S1 continuous work motor power 2.2 kW Power supply 400V Weight 180 kg Dimensions 1550×1900×820 mm

Condition: used, Technical data: Max planing width: 230 mm Rsdpfx Ahomiik Tozsbt Max planing height: 120 mm Spindle diameter: 40 mm Number of spindles: 5 Spindle sequence: down 5.5 kW right + left 11 kW up 7.5 kW universal 5.5 kW Each spindle on a separate motor Number of upper steel pulling rollers: 5 Number of upper rubber pulling rollers: 3 1 rubber roller in the table top Extraction port diameter: 150 mm Smooth feed adjustment: 4-24 m/min Cardan feed Table lubrication pump Pressure: 6 atm. Electric lifting of the body Power: 400V Overall dimensions: Length: 4240mm Width: 1550mm Height: 1560mm

Condition: new, Year of construction: 2025, Table saw with right-sided table expansion, straight and angled fences. Machine features This machine is a powerful, precise and universal device in a compact body, created for small workshops, furniture manufacturers and carpenters. This model features many solutions implemented in more expensive models. Fantastic value has been achieved without any compromises when it comes to its quality and universality. Technical data Maximum saw/hole diameter 254×30 mm Saw speed 4000 rpm Saw tilt range 90–45° 45º maximum cutting depth 65 mm 90º maximum cutting depth 80 mm Cutting width with expanded table 750 mm Extraction connector 100/25 mm Worktable dimensions 635×420 mm Expanded worktable dimensions 635×1500mm Motor power 2.2 kW (S1) 400V / 3.1 kW (S6) Weight 110 kg Dimensions 1450×1000×1100 mm Manufacturer: Cormak Redpfevxhi Eox Ahzjbt

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm Rbjdpfegv I U Sox Ahzjt weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models