Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Ksdpfx Ahsi Dphtj Noll Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Table milling machine minimax twf 55 es M 3 UP Professional workman's machine with motorized height and inclination adjustment of the milling spindle, four speeds and electronic control system Item number 5502266 Brand Holzkraft / SCM EQUIPMENT Equipment Aluminum sliding carriage ✔ Handle at sliding carriage ✔ FLEX ONE routing fence: heavy-duty professional design, automatic adjustment of the entire routing fence depending on the tool diameter, manual adjustment of chip removal, swing-away device, aluminum fence jaws with connecting strips Height adjustment of the spindle motorized. Telescopic miter fence with two folding stops Inclination adjustment of the spindle motorized Cantilever table ✔ Ready 3 control: Programmed movement of the milling unit in two axes, Automatic adjustment of the entire milling stop depending on the tool diameter, Stepless adjustment via switch or automatic positioning system Curved milling protective hood ✔ Position of control elements Control panel at eye level, swiveling Eccentric clamp TECHNICAL DATA Dimensions and weights Length (product) approx. 1200mm Weight (net) approx. 510kg width/depth (product) approx. 2000mm Connection suction suction connection diameter 2 x 120mm Work table Working table length 1200mm Sliding carriage length 1200mm Working table width 530mm Sliding carriage width 360mm Table height 900mm Slide height 142mm Installation information Space requirement length 2800mm Machine body width/depth 846mm Kledohp Rc Ispfx Ah Njl Space requirement width [...]

Condition: new, Year of construction: 2024, Panhans swivel milling machine type: 245/20 Solid German engineering Table milling machine with one-sided swiveling fixed milling spindle for the swivel range from -5° to +45.5° Positioning control for height and swivel adjustment with height zeroing and offset measurement travel Electronic position and speed displays 4 speeds 3000 / 4500 / 6000 / 9000 rpm Quick belt tensioning device Push button for spindle start and stop Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Lower control panel on rigid frame support Milling fence 216 total adjustment via handwheel and LCD display incl. cast fence plates and aluminum splitter tongues Kljdper Ig H Tjfx Ah Njl Machine socket Lockable main switch Mechanical motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE-compliant GS tested Table size 1100 x 760 mm Table height 870 mm Milling spindle not exchangeable 30 mm Clamping height 140 mm Height adjustment 125 mm Suction nozzle 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 light grey and RAL 5000 violet blue Net weight approx. 800 kg Equipment: Top control panel Swivel +-45 degrees Motor 7.5 Kw Centerx Extendable frame support Location: ex stock 54634 Bitburg - immediately available -

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - table milling machine with tilting milling spindle and table extensions Table milling machine with tiltable milling spindle from -45° to +45 Kljdpfxodqzcxj Ah Nel Sturdy cast steel construction Dynamically balanced milling unit anchored to the work table Particularly robust construction Smooth running due to precision aggregates and high dead weight Standard with right-left rotation and electronic blocking when changing direction 5 speeds from 3000 - 10000 min-1 Speed change is easy and convenient from the machine side Standard with MK 4 change spindle system Large work table made of cast iron for long-lasting precision Easy handling due to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence jaws as standard equipment Powerful industrial motors Equipment details: Fraes fence Fraes fence with crank/handwheel adjustment from the front side With numerical display Interchangeable spindle Interchangeable spindle MK 4 standard on all CASADEI F 23 and F 25 models Option sliding carriage Option sliding carriage for small tenoning operations and for slotting Scope of delivery: Manual tiltable milling spindle from +45° to -45°. Speed indication via LED at the front Aluminum stop jaws Sheet milling protection cover Right-left rotation of the milling spindle MK 4 interchangeable milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display table extension left and right (2500 mm length) extendable workpiece support (2500 mm length) Model CASADEI F 25 LL FK article no. 5220728 Technical data Dimensions work table 2500 x 810 mm Milling spindle tilting range +45 to -45 degrees useful length of spindle at Ø 30-35 mm 140 mm useful length of spindle at Ø 40-50 mm 180 mm milling spindle stroke 90 mm max. tool Ø profiling 250 mm max. tenon tool Ø 350 mm max. milling tool Ø 160 mm max. tool-Ø lowerable 320 x 60 mm speeds, 5-stage 3000/4500/6000/ 8000/10000 min¯¹ motor power 400 V / 50 Hz / S6-40% 7 kW weight 480 kg suction nozzle-Ø stop 1 x 120 mm suction nozzle-Ø under table 2 x 80 mm Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Sturdy cast steel construction With rigid milling spindle 3 spindle speeds 3500 to 10000 min¯¹ Milling spindle with right-left rotation Large dimensioned milling unit made of grey cast iron, directly mounted to the table With suction hood under the worktable for better extraction Solid and precise cast iron table Quick and easy speed change Powerful motor with 5,0 kW Standard arc milling protection hood Quality Made in Italy Equipment details Cast iron milling unit Directly mounted on the milling table Milling spindle mounted high up with precision ball bearing, thus lowest possible bearing load and longest possible service life 3 milling speeds from 3500 to 10000 min¯¹ Powerful motors equipped with powerful three-phase motor Milling guard The standard milling guard is equipped with a height-adjustable guide rail and guard plate as standard for maximum safety. Milling fence Precise milling fence with a quick adjustment and a fine adjustment with scale on the fence jaw. The integrated suction connection ensures a clear view Milling table opening A large milling table opening also allows the use of larger flattening cutters and tenoning and slotting tools above and below the table Klsdpfshp Rcrex Ah Njl Curved milling protection hood Included as standard Reversible fence jaws versatile integratable stop for bridging the tool gap enables safe working even with narrow workpieces TECHNICAL DAY

Condition: new, Year of construction: 2025, Table milling machine minimax tw 45c With aluminum sliding carriage and swiveling milling spindle - high performance for a low investment Item number 5502045 Brand Holzkraft / SCM TECHNICAL DATA Dimensions and weights weight (net) ca. 290kg Connection suction suction connection diameter 2 x 120mm Working table Working table length 1000mm Sliding carriage length 1000mm working table width 435mm sliding carriage width 270mm table height 900mm Installation information Space requirement length 1945mm machine body width/depth 710mm Space requirement width/depth 2220mm Working area length 1600mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Working area Width/depth 1600mm Machine body Length 1000mm Explanation Working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Power drive motor 5,0kW Mains frequency 50Hz Milling spindle Spindle inclination 0 to -45° Spindle speed(s) 3500/7000/10000min¯¹ Useful length of spindle 100mm Spindle mandrel diameter 30mm spindle protrusion max. over table 130mm Milling tool diameter max. Tool diameter max. lowerable 180mm Tool diameter max. tenon milling 275mm tool diameter max. profile milling 210mm SUPPLY Arch milling protection hood Anodized aluminum sliding carriage Telescopic miter fence Aluminum stop jaws Kledpfjhp Rcyex Ah Nel

Condition: as good as new (ex-display), Year of construction: 2025, Minimax ti 55es LL - spindle moulder Figure shows 55 i T s standard version elite The professional craftsman machine with Swivel Milling spindle and 4 speeds. M Digital: motorized height adjustable and Tiltable Stable steel-cast iron construction Large dimensioned milling unit of grey cast iron, swivel up to 45 ° to the rear Display of the cutting speeds by LEDs Quick and easy change of speed of eccentric tension Right left rotation Display height and inclination 1/10 mm exactly Shaper fence heavy-duty professional: with fine adjustment via rack and pinion, with numerical display, ALU stop baking, 3-fold positioned for quick repeat of setting Scope of delivery: Aluminium milling stop baking Milling wheel arch guard Extension table left and right Model minimax ti 55es LL Item No. 5502252 Technical data Dimensions of the working table 2500 x 655 mm Formatschiebeschlitten commercial length of spindle dimensions 125 mm Max tool diameter 240 mm Max tool diameter lowerable 230 mm Max tool-Ø pin cutter 320 mm Spindle inclination 0-45 degree Speed 3500/6000/8000/10000 min-1 Engine power 400 V / 50 Hz / S6-40% 5.0 kW Kedpfxjdqzh Rs Ah Nsll Suction nozzle diameter 2 x 120 mm

Condition: excellent (used), Year of construction: 1994, Holz Her Tilting Spindle Moulder with Holz Her Power Feeder Table extension on both sides with pull-out stop Swiveling spindle: Yes, -5 to +45° Height adjustment: manual Tilting adjustment: electric Fence adjustment: manual Height display: digital Tilting angle display: digital Fence position display: scale Spindle diameter: 30 mm Speeds: 1500, 3000, 4500, 6000, 9000, 12000 rpm Motor power: 5 / 6 kW Motor brake: Yes, automatic Extraction connection: 2 x 120 mm Machine length: 1950 mm Machine depth: 1400 mm Weight: approx. 1100 kg Kljdpfxoxpm Evs Ah Nol Holz Her Power Feeder, type 1112 – 4 rollers Location: Ex stock 54634 Bitburg - Immediately available -

Condition: good (used), Year of construction: 1986, Hoffmann Dübelfix chain mortiser with pneumatic lift - very good condition - Pneumatic tensioner Revolver stop Material support Pneumatic foot pedal Location: from stock 54634 Bitburg - immediately available - Klsdpovk Dqvofx Ah Nel

Condition: new, Year of construction: 2025, Martin T 27 Flex Swivel Spindle Moulder – double-sided tilting – Flexibility for today and tomorrow. Setting up a tilting spindle moulder is usually a major challenge. Not with the T27 Flex and its modern touchscreen control: thanks to integrated tool offset management, you can set up even complex moulding profiles with a tilted spindle in no time. This allows you to make full use of the wide swivel range of 2 x 46°, letting you follow your requirements with complete flexibility. Additionally, the machine can be configured precisely to suit the specific needs of your operation. Equipment includes: - T 27 Flex - T 2711-a Digital indication of fence jaw position via the control system - T 2731-a Table extension on both sides + extendable workpiece support - T 2740-a Centrex guard - T 2742-a Integral fence - T 2743-a Auto Lock spindle moulder fence jaw clamping system - T 2790-La Console for feed unit stand, left side attachment The photo shows a sample machine only / feed unit and support not included Included scope of delivery is described in the text above Ksder Hr D Njpfx Ah Noll Location: Arriving in stock at 54634 Bitburg - Available in two weeks -

Condition: excellent (used), Year of construction: 2001, Kity 629 rotary tiller Klsdpsr Id S Eefx Ah Nel Motor 2,2 KW/400 Volt Table size approx. 580x715 mm Finely adjustable milling fence spindle swivel + 30° to - 5° Right/left rotation of the milling spindle Speeds 4800/6400/8700 rpm Spindle stroke 130 mm Tool up to Ø 180 mm Suction connection 2 x 100 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), SCM T130N Spindle Milling Machine Klsdpfx Ahovl Ik As Nel Spindle diameter 35mm Total spindle length 140mm Variable spindle speed on belt 3000-4500-6000-7000-10000 r.p.m 5.5kw motor Side carriage for tenoning with eccentric clamp Left and right spindle rotation Manual spindle lifting with reading CE certificate DTR documentation Year of production 2007

Condition: used, Year of construction: 2005, functionality: fully functional, We are offering this used Griggio G240 P spindle moulder, year of manufacture 2005. If you have any questions or need further information, please feel free to send us a message or contact us by phone. Kledpox Ry R Refx Ah Njl

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data Table size 1100 x 760mm Table height 905mm Milling spindle 30mm with quick-release nut Clamping height 140mm Height adjustment 125mm Suction nozzle 2 x Ø 120mm Infinitely variable speed control 150010000 rpm Motor power 7.5 kW (10 HP) Net weight approx. 880kg Technical description 7" touch control, can be used optionally, top and bottom 7" capacitive touchscreen, can also be operated with gloves can also be operated with gloves (e.g. with Maxi Flex) Language switching German, English, French (other languages on request) Milling cutter zero point selectable in the program, 3 reference points Simple menu structure thanks to innovative touch control (max. 2 levels) Display (work screen) for tool and program number program number, height, angle, speed and milling fence Operating hours counter Warning messages in the event of incorrect operation Remote maintenance via Internet (VPN tunnel) USB interface for data backup and importing Tool, program and user Tool database for 5 tools (20 programs possible per tool) 20 programs are possible per tool) Heavy-duty bench router with double-sided swivel-mounted, fixed built-in milling spindle for swivel range of +/- 45.5° 2-axis positioning control for height and tilt adjustment swivel adjustment Electronic position and speed displays Infinitely variable speed control 1500 10000 rpm 7.5 kW motor with 11 KW frequency converter Push button with electronic soft start Left and right rotation Milling cutter quick clamping device Finely planed gray cast iron table with rigid frame support Milling fence 301 Overall adjustment via 1 handwheel on the right-hand side, Adjustment range approx. 140 mm, dimension display, Total stop via touchscreen +/-0.1 mm, Partial stop adjustment, (chip removal) +5mm to -25mm is carried out via a star knob screw on the left side side, dimension display via one mm vernier, clamping on the machine table the machine table manually via clamping clamping screws, milling fence made of die-cast aluminum with 2 milled cast iron stop slats 500mm long with aluminum splitter tongues, maximum possible tool diameter is tool diameter is 250 mm Machine socket Lockable main switch Electronic, wear-free motor brake Milling protection and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30mm with quick-release nut CE-compliant incl. - Milling fence type 301 - Cast stop plates and aluminum splitter tongues - Milling protection and pressure device GAMMA V 1629 Table pusher for table top 1100 x 760 mm Coated surfaces, for quick, convenient and tool-free tool-free adjustment to different tool diameters tool diameters up to max. 240 mm, the table insert Table insert with quick lock up to tool diameter 155 mm instead of standard table insert rings (not in conjunction connection with rotary table) - Zeromaster reference measurement setting device for exact 0-point height adjustment from the milling tool to the table top for 24 V DC Ksdex N Dhdopfx Ah Nell - HSK-80 quick-change arbor system with spindle lock and spindle lock and milling arbor 30mm instead of milling spindle 30mm (higher concentricity and no sticking in the spindle as with the spindle as with the MK 5 system or steep taper) - Console to the

Condition: excellent (used), Milling machine, copy router in very good working condition. Klodox Rrtdspfx Ah Nsl

Condition: ready for operation (used), functionality: fully functional, Type: OPTIMAT F 13 Year of manufacture: 2001 Condition: function-tested, very good, used - Workpiece thickness: 16 to 55 mm - Minimum workpiece width: 30 mm - Minimum inner radius: 35 mm - Maximum edge thickness: 3 mm - 2 milling motors 0.4 kW - Extraction connection 80 mm Kledpfx Aex Rrbzsh Nel

Condition: excellent (used), Catalogue number 7781 TECHNICAL SPECIFICATIONS - Maximum milling height: 216mm - Maximum milling depth: 65mm - Maximum cutter diameter: 250mm - Spindle working length: 500mm - Spindle speed: 4600 rpm - Spindle diameter: 40mm - Max tool diameter: 250mm Kjdoxnymkopfx Ah Nsll - Worktable dimensions (L/W): 890x400mm - Motor: 11kW - 2 pneumatic material clamps - Air requirement: 6-8 bar - Dust extraction port diameter: 160mm - Dimensions (L/W/H): 1330x1200x1470mm - Weight: 970kg ADVANTAGES – Polish manufacture – Not repainted – Used milling machine, very good condition Net price: 38,900 PLN Net price: 9,260 EUR (calculated at 4.2 EUR exchange rate) (Prices may vary depending on significant fluctuations)

Condition: refurbished (used), Cross Rail Milling Machine Rsc Tccgsx Rdw Ioxasck Manufacturer: Stegherr Type: KSF Designed for milling cross rail joints, e.g. in windows, doors, and furniture. Equipped with 3 milling units: One upper and one lower milling unit perform parallel milling operations similar to angled cuts, while the third unit simultaneously performs flush milling. Klodpfxjx Rhwls Ah Nel The machine table moves pneumatically-hydraulically. Proc Tccjw Imhcogxaef Feed and return speeds are adjustable. Foot-operated control. 2 motors, each with a power of approx. 2.2 kW Total power consumption approx. 4.5 kW Compressed air pressure: 6 bar Voltage: 380 V 50 Hz Suction connection diameter: 180 mm

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Standard Equipment and Accessories - Swiveling operator panel easily accessible for the operator, "eye-S 15" electronic control system. Includes: * 15" touchscreen monitor * Direct control of 6-8 axes with manual, semi-automatic, and automatic operating modes * Operator assistance with the option to manage 3 different points on the tool for accurate determination of the reference point (zero point) * Capability to store up to 1000 programs with associated images * Capability to store up to 1000 different tools with associated images * USB port * Ready for network connection Kjdpfx Ajx Nbzush Nsll - Operator aid on the electronic control, including: * Tool database management * Display of coordinates at 3 points on the tool for new reference (zero) point determination * Management of tool edge speed * Operator support for common machining tasks - "Flex" milling fence with automatic adjustment via the electronic control system. Complete fence adjusted to tool diameter, infeed jaw for required chip removal. Movable "FLEX" fence from the worktable. - Aluminium fence jaw for the milling fence with inserts for continuous support - "Fast" table insert, manually adjustable, replaces table rings for optimal workpiece support surface - Electrical pre-wiring for a power feed unit - Spindle rotation direction: right/left - Automatic motor start - Version M-E includes: * Electrospindle with max. performance from 3,400 rpm * Electrospindle power 7.5 kW (10 HP) [S6 -40%] * Interchangeable MK5 spindle * Inverter for speeds from 900 to 12,000 rpm - Interchangeable MK5 milling spindle Safety/Protection - Milling guard, max. tool diameter 160 mm - Electronic motor brake effective even without mains power - Safety sensors during tool change for: spindle stop, spindle lock, opening/closing of tool holder - Electropneumatic spindle lock - Microsafety switch on machine door - Emergency stop button - Lockable main switch - Motor protection switch - Control circuit 24V - CE Declaration of Conformity - Frequency 50 Hz - Base - MACHINE LANGUAGE: German - Standard safety regulations - Manual device for feed support height adjustment according to workpiece thickness with mechanical digital display and horizontal adjustment according to tool diameter. Thanks to the operator panel column, this device allows the feed support to be swung away from the work table. - Voltage 400 V, EU - Quick tool clamping system "T-SET" Allows clamping/unclamping of tools via easy application with a compressed air gun. - L'invincibile TI 5 CE version - "LL" version worktable with two cast iron table extensions; total length 2500 mm, complete with extendable support rail for wide workpieces - Emergency stop switch - Milling spindle diameter 30 mm Availability: short-term

Condition: used, functionality: fully functional, SECOND-HAND ROUND END TENONER WITH 2 BENCHES BALESTRINI MOD. PICO Klodpfx Asx Rdnaeh Njl - Maximum tenon size: 100 x 30 mm - Maximum table tilt: 20° - Workpiece support guide tilt: 45° - Hourly production: 600/700 tenons - Cutter rotation: 9,000 rpm - Cutter motor power: 4 hp

Condition: used, Year of construction: 2011, Available after demonstration: swiveling table Table size: 1080x750 mm Table height: 920 mm Spindle speeds: 1500/3000/4300/6000/9000 rpm Spindle diameter: 30 mm Swivel range: +45°/-45° degrees Spindle right/left rotation: yes Speed display: optical Automatic motor brake: yes Fence jaws version: Aigner fence system Fence adjustment: manual Power feed: with 3 rollers Control panel position: at the bottom Weight approx.: 580 kg Motor power: 4 kW Extraction diameter: 120/120 mm Storage location: Kedpfx Aox Rdl Soh Nell

Condition: used, Year of construction: 1998, functionality: fully functional, SECOND-HAND HIGH SPEED VERTICAL MILLING MACHINE CAMAM MOD. FV/1T-1P - Volt. 380/50 - CE rules Kedpfxjx Rdhto Ah Njll - Year 1998

Condition: used, Year of construction: 2006, functionality: fully functional, MILLING PRINTING MACHINE TECNOMAX MOD. ROUTER F Kledpex Rc Ncsfx Ah Nel - Year 2006

Condition: good (used), End mill, shank cutter, cutter, slot cutter, wood cutter -Two-knife cutter -Roughing-finishing end mill Kedpfx Ahjb D I Axo Noll -4x: Milling cutter Ø 4 x 12 mm -7x: Milling cutter Ø 5 x 12 mm -10x: Milling cutter Ø 6 x 14 mm -1x: Milling cutter Ø 8 x 20 mm -5x: Milling cutter Ø 10 x 20 mm -4x: Milling cutter Ø 11 x 22 mm -3x: Milling cutter Ø 12 x 22 -Hole: Ø 10 mm -Type: M623 -Quantity: 34 pieces -Sale: only complete set -Weight: 3.6 kg

Condition: excellent (used), Main engine power 3.4 / 4.5 kw Feed power (3 rollers) 0.7 kw spindle diameter 30mm The reach of the trolley is 170 cm Very good condition. Kedpfx Ajg Etw Ijh Njll