Swivel spindle milling machine

Panhans Typ 240

Condition: as good as new (ex-display), Demonstration unit with 7 operating hours immediately available (ex works Neckartailfingen) Shredder MRZ 830 Commodity code: 84659600 Year of manufacture: 2023 Infeed opening 800x1000 mm Motor: 22 kW; 400 V - 50 Hz - 3 phase Blades: multiple-rotation hydraulically actuated slide Screen size selectable (10 - 40 mm) Weight approx. 1,600 kg Nlodpfx Amov Sqrpjysd Dimensions (l x w x h) approx. 2290 x 1420 x 1750 mm Turbo coupling Standard equipment includes: - automatic star/delta start - fast hydraulics - auto. OFF when rotor is idling - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-dampening machine feet - CE compliant The shredder is designed for shredding natural wood, chipboard, and MDF, as well as other materials after testing and approval by the manufacturer. Included: - Shredder raised by 30 cm (preparation for conveyor belt) Additional shredder options: - Articulating conveyor belt + €8,770 net Horizontal section: 1200 mm Inclined section: 2500 mm Angle: adjustable from 0-60 degrees Discharge height: approx. 2000 mm + - 100 mm - Overband magnet + €6,780 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) Requirements for the raw material: - The moisture content (as received) must be below 30%, - Metals and mineral contaminants such as sand, stones, etc. lead to increased wear.

Condition: used, 7 pieces Bending tools for a swivel bending machine Length 3000 mm Nsdpfx Ajb D Ry Rjmyjld

Condition: used, machine/vehicle number: 008186, Max. panel width: 3200 mm Max. panel length: 3200 mm Nlodpfoxaudzsx Amyod Main saw blade projection: 110 mm No of Grippers: 11

Condition: used, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 400 mm, saw band length: 5,550 mm, saw band width: 80 mm, table length: 800 mm, table width: 1,060 mm, working height: 400 mm, - Italian manufacture - Lamella band saw - Unpainted - Very good condition - Used saw Band Saw: - Wheel diameter: 800 mm - Max. blade width: 80 mm - Max. cutting height: 400 mm - Main drive motor: 11 kW - Feed speed range: 2–40 m/min - Feed system with pneumatic pressure to the guide - Metal slip-in feed roller - Blade length: 5550 mm - Throat (blade-to-frame distance): 780 mm - Screw-type blade tensioning - Table size: 1060x800 mm - Tilting worktable: up to 15° - Extraction port diameter: 120 mm - Blade lubrication system - Foot brake - Cast wheels - Star/Delta starting - Power supply: 380V - Dimensions (LxWxH): 1600x1100x2400 mm - Weight: 860 kg Feed Unit: Nlsdpew H Rq Hsfx Amysd - Metal, toothed, drive roller - Five feed speeds, selectable by belt adjustment - Roller height: 30 mm - Feed motor: 0.75 kW - Pressure system

Condition: used, Year of construction: 2002, Machining dimensions (tool diameter 25mm): X=3015 mm Y=1483 mm Z=325 mm Max. travels: X=3268 mm Y=1483 mm Z=325 mm Max. programming speed: X/Y = 75 m/min / Z = 30m/min Tool holder HSK 63F Drilling unit 7964, 14 vertical drilling spindles with 32 mm grid (10 in x / 4 in y) Sawing unit 7946 3.6 kW, 90° pneumatically pivotable Milling unit 7933 9 kW Wood Her Vector axis (C-axis) Tool magazine (6 disk places) Hand control unit Laser device (positioning of the suction cups) PC control panel with 17" monitor Operating system Windows 2000 Software: TwinCAM32 - office version Vacuum pump 100 m³/h Dry running Selective safety mats (3-field division) Nedovvi Nbjpfx Amysld Storage location: Nattheim

Condition: used, Year of construction: 2008, machine/vehicle number: 0-411-49-1873, Technical data: Nedjyh Hwujpfx Amysld - Manufacturer: Bütfering - Type: Optimat SGO 211/RC - Number of grinding units: 2 - Year of manufacture: 2008 - Working width: 1.100 mm - Grinding belt width: 1.120 mm - Grinding belt length: 1.900 mm - Workpiece thickness: 3-160 mm - Feed speed: 2,5-13 m/min. - Table height adjustment Standard equipment: - Automatic workpiece thickness adjustment - Stepless feed speed via requency converter. - 125 grinding programs can be stored - Wear-free braking system 1. Grinding unit (R) - Calibration roller - Profiled steel contact roller - Diameter 160 mm - Drive motor: 15 kW 2nd grinding unit (C) - Combination unit with roller and grinding shoe - Rubberized contact roller 65 Shore - Contact roller diameter 160 mm - Electronic link pressure bar with segment width 35 mm. - Belt speed: 12 and 21 m/s - Tolerance compensation up to 1 mm - Suitable for veneered surfaces and solid wood. - Drive motor: 11 kW - Total connected load: approx. 28 kW - Operating voltage: 400 V / 50 Hz. - Compressed air consumption at 6 bar, 20 L/min. - Belt blow-off device per pressure surge 440 L/min. - Extraction volume: approx. 2,880 m3/h/ at 20 m/s - Extraction connection: Dedusting: 1 x Ø 160 mm (grinding unit, roller) 1 x Ø 160 mm (grinding unit, shoe) Dimensions: - Length: 1,700 mm - Width: 1,850 mm - Height: 2,100 mm - Location: not in stock - Available from April 2026

Condition: used, Panel Saw ALTENDORF F45 -used- Double roller carriage, Scoring unit, Rip fence with fine adjustment, Support table, Hydraulic height adjustment, Hydraulic tilting adjustment, Digital tilt angle display, Speed display, Table extension, aluminium anodized, Table width extension, aluminium anodized, Angle/miter fence, Overhead guard, narrow and wide, Automatic brake, Dust tested ----- Technical Data ----- Tilting range: 45°, Carriage length: 3,200 mm, Cutting width: 1,300 mm, Cutting height: 125 mm, Max. saw blade Ø: 400 mm, Speeds: 3,000/4,000/5,000/6,000 rpm, Nljdpfx Aew Nx A Iomysd Motor power: 5.5 kW, Weight: 1,040 kg

Condition: new, Year of construction: 2024, TECHNICAL DATA Table size 1100 x 760 mm Table height 870 mm Milling spindle non-replaceable 30 mm Clamping height 140 mm Height adjustment 125 mm Dust extraction port 2 x Ø 120 mm Speed 3000 / 4500 / 6000 / 9000 rpm Color RAL 7035 Light Gray and RAL 5000 Violet Blue Net weight approx. 800 kg TECHNICAL DESCRIPTION Robust German engineering Table milling machine with a permanently installed, single-sided swiveling milling spindle for a swiveling range of -5° to +45.5° Positioning control for height and swivel adjustment with zeroing of the height and offset dimension Electronic position and speed indicators 4 speeds 3000 / 4500 / 6000 / 9000 rpm Belt quick-clamping device Push buttons for spindle start and stop Left and right rotation Nlodpofpb Nmefx Amyod Milling cutter quick-clamping device Finely planed gray cast iron table with rigid frame support Control panel located below on rigid frame support Milling fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminum splinter guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Arc milling fence 1639 Tapoa Milling spindle 30 mm, non-replaceable CE compliant GS tested

Condition: as good as new (ex-display), Year of construction: 2025, CASADEI F 25 LL FK - Table milling machine with swiveling milling spindle and table extensions Table milling machine with a swiveling milling spindle from -45° to +45° Stable steel cast iron construction Dynamically balanced milling head anchored to the work table Particularly robust design Smooth operation thanks to precision components and high weight Standard with right/left rotation and electronic locking during direction change 5 speeds from 3000 - 10000 min-1 Speed change is simple and convenient from the machine side Standard with MK 4 quick-change spindle system Large work table made of cast iron for lasting precision Easy operation thanks to control elements and speed display on the front of the machine Milling fence with fine adjustment and aluminum fence cheeks included as standard Powerful industrial motors Nljdpfjdqzcxjx Amyjd Equipment details: Milling fence Milling fence with crank/handwheel adjustment from the front With numerical display Quick-change spindle Quick-change spindle MK 4 standard on all CASADEI F 23 and F 25 models Optional sliding table Optional sliding table for small tenon cutting operations and for slotting Scope of delivery: Manually swiveling milling spindle from +45° to -45° Speed display via LED on the front Aluminum fence cheeks Arc milling guard Right/left rotation of the milling spindle MK 4 quick-change milling spindle Milling fence with crank/handwheel adjustment from the front with numerical display Table extension left and right (2500 mm length) Extendable workpiece support (2500 mm length) Model: CASADEI F 25 LL FK Article no.: 5220728 Technical data Dimensions of work table: 2500 x 810 mm Swiveling range of milling spindle: +45 to -45 degrees Usable length of spindle with Ø 30-35 mm: 140 mm Usable length of spindle with Ø 40-50 mm: 180 mm Milling spindle stroke: 90 mm Max. tool Ø for profiling: 250 mm Max. tenon tool Ø: 350 mm Max. form cutter tool Ø: 160 mm Max. tool Ø, plunge-cutting: 320 x 60 mm Speeds, 5-stage: 3000/4500/6000/8000/10000 min-1 Motor power 400 V / 50 Hz / S6-40%: 7 kW Weight: 480 kg Extraction nozzle Ø on the fence: 1 x 120 mm Extraction nozzle Ø under the table: 2 x 80 mm Location: In stock at 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Partnership Edition Technical Specifications: Cutting height: vertical: 0–2,150 mm, horizontal: 80–2,000 mm Cutting length: 5,300 mm Cutting depth: 80 mm (55 mm with clamps) Saw blade: Diameter 303 mm, bore 30 mm, Z=60 hollow flat-top tooth Blade speed: 5,000 rpm Required air pressure: 6 bar Measurement readout for horizontal cuts: - via scale from 0–2,070 mm - via strip cutting fence from 75–500 mm Measurement readout for vertical cuts: - via scale from 0–1,300 mm Extraction connection: 1 x 100 mm, 1 x 120 mm Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping grippers, motorized on vertical axes via a ball screw, moving from top to bottom. The grippers handle panels weighing up to 150 kg. - Torsion-free, free-standing machine frame - Round bar guides, vertical and horizontal - Pneumatically retractable slat bed - Fine-adjustable flip stop with extension - Fine adjustment for horizontal cuts via handwheel Nledpjw I U D Esfx Amysd - Strip cutting fence - Manual programming rail with 5 T-slot nuts - Pneumatic immersion of the saw unit - 25 material support rollers - 1 infeed and 1 outfeed roller - Pneumatic workpiece clamping device between the support rollers - 3 intermediate support elements, pneumatically extendable - Pneumatic saw head locking - Control panel with documentation holder - Switch unit on the saw unit: start button, stop button - Tool cabinet - Scale illumination for vertical cuts Partnership Edition Features: - Digital display for the flip stop - Digital display for the saw unit with incremental mode - Pneumatically tiltable saw unit - Scoring system with controlled counter-air nozzle, numerical display for scoring or grooving depth setting, and activation indicator - 5.5 kW motor including star-delta starter - Cutting line laser Availability: Short-term Location: Flörsheim