Condition: reconditioned (used), Year of construction: 2002, travel distance X-axis: 16,000 mm, travel distance Y-axis: 3,200 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Y-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, 100% Retrofit by Dornhöfer The Difference. Cebvpmev S Upfs D Hegt Including installation and commissioning! Year of manufacture: 2002 Control: Heidenhain TNC 640 / TNC 7 Travel: X-axis (mm) 16,000* (see below) Y-axis (mm) 3,200 Z-axis (mm) 1,500 Spindle speed range: 20–4,000 rpm Feed rates: X, Y & Z axes (mm/min): 2–12,000 Max. rapid traverse speed X, Y & Z axes (mm/min): 15,000 Milling head: Automatic milling head, orthogonal H10, 1° pitch Tool holder: ISO 50, DIN 69871 AD Main spindle drive power: 100% duty cycle KW37 - Automatic tool changer with 60 magazine positions - Coolant system with 20 bar & (IKZ) - Chip conveyor, floor ejection - Ergonomic operator platform - Hazardous area protection - 3D thermal expansion compensation - INA linear guides *Adaptive X-axis length: We supply the machine bed in the length you require, up to a maximum of 16,000 mm. 100% RetroFIT – our core business! For us, it means offering a machine that can only be compared to a new product, but also offers you many other advantages: Latest CNC control technology with proven machine stability Significant CO₂ savings compared to a new machine Shorter delivery times Often savings on complex foundation costs Significantly lower investment costs All mechanical components (e.g., ball screws, guides, rolling bearings, etc.) have been renewed. Our designers designed the entire electrical peripherals (such as the most modern drive, control, and regulation technology) using the most efficient technologies. This was implemented using new cabling and a completely new control cabinet, as well as the latest Heidenhain control system with a wide range of innovative options. The completely new and innovative hydraulic concept meets the most modern requirements and achieves maximum efficiency. The machine's visual appearance is in no way inferior to a new machine thanks to its refurbishment: The entire machine was first disassembled down to every screw, sanded, primed, and then painted with a robust 2K EP paint. We equipped the machine with a safety concept that is individually tailored to the needs of the operator. We offer the highest level of safety, flexibility, and ergonomics. You receive a state-of-the-art machine combined with significant CO₂ savings.

Condition: good (used), Year of construction: 1981, Deckel FP3L Active with 3-axis Heidenhain Active digital display, rigid table, vertical milling head, SK 40 S20x2 spindle mount. Good working condition. Ready for live demonstration upon request. Cgobvpmjwg S Nks D Hot

Condition: new, Pull studs DIN 69872 A SK 40 Stock number 28614 Unused, in original packaging Cgobvswf Afaopm D Hjt 25 pieces, unused in opened original packaging

Condition: good (used), Year of construction: 1999, Ref. -No.: 10522 Manufacturer: SORALUCE Type: SP 6000 Year of construction: 1999 Type of control: CNC Control: HEIDENHAIN Storage location: Halberstadt Country of origin: Spain X-Travel: 4500 mm Y-Travel: 1200 mm Z-Travel: 1600 mm Feed: 5000 mm / min Rapid Traverse X/Y/Z: 15 m / min Table surface area (LxW): 6000 x 1000 mm Tool Taper: SK 50 Spindle Speeds: 67 - 4.000 RPM Distance table - spindle nose with vertical milling spindle: 870 mm Further information: incl. accessories, tools, fixtures Cjbswfy Hujvpm D Hsgt Machine is in production and can be inspected under power at any time.

Condition: good (used), DECKEL universal table, Support surface 800 x 380 mm Csbvev N Hyqopm D Hjgt 8 T-slots See photos for condition

Condition: excellent (used), Year of construction: 1978, Functionality: fully functional, Universal Milling Machine Deckel FP 2 Partially Refurbished Cjbvpewfxggom D Hjgt Item Number: 07-07-112 Manufacturer: Deckel Condition: Very good general condition Machine partially refurbished Delivery time: on request – subject to prior sale Year of manufacture: approx. 1978 Dimensions (L x W x H): approx. 2000 x 1500 x 1800 mm Weight: approx. 800 kg Digital Readout: 3-axis digital readout Sino New Travel Paths: X-axis: approx. 400 mm Y-axis: approx. 200 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 350 mm Spindle: Speed range: approx. 40–2000 rpm Tool holder: ISO 40 Drive power: approx. 2.2 kW Tool clamping: manual Feeds & Rapid Traverses: Feeds in all 3 axes Feed range: approx. 8–400 mm/min Rapid traverse: approx. 1.5 m/min Accessories: Vertical & horizontal milling equipment Work light New Coolant system New Complete documentation Various clamping wrenches 3-axis digital readout SINO New Spindle protection cap Horizontal spindle cover cap Chip tray Safety handwheels Machine feet New Further accessories available on request. Price and further technical data available upon request.

Condition: refurbished (used), Year of construction: 2007, Functionality: fully functional, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,200 mm, rapid traverse X-axis: 25 m/min, rapid traverse Y-axis: 25 m/min, rapid traverse Z-axis: 25 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table load: 5,000 kg, table length: 2,700 mm, overall weight: 15,500 kg, year of last overhaul: 2024, RefurbishmentPLUS by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2007 Capacities / Travel: Longitudinal (X): 2,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,200 mm Table size: Length: 2,700 mm Width: 850 mm Number of T-slots on the table surface: 6 T-slot width: 22H12 mm Reference slot: 22H8 mm Distance between slots: 140 mm Max. table load: 5 t/m² Paint finish: RAL 5011 (steel blue) and RAL 7035 (light gray) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 form A Main drive: Drive power: 100% duty cycle KW24 Spindle speed range: Spindle speed: 20-4,000 rpm Torque: 479 Nm Feed rates: X, Y, and Z axes mm/min 10-10,000 Max. rapid traverse speed: X, Y, and Z axes mm/min 25,000 Weight: approx. 15,500 kg BASIC MACHINE EQUIPMENT: Cgjbvpmsun Nnqj D Hot Heidenhain iTNC 530 HSCI Automatic milling head, diagonal H200 Chip conveyor Coolant system STANDARD EQUIPMENT: - Portable electronic handwheel HR 510 with 3m spiral cable - Hydraulic counterbalance acting directly on the vertical slide - 3D thermal expansion compensation for Heidenhain CNC contouring controls - Complete splash guard enclosure consisting of two front doors and one rear door for operating the machine from the front and rear. All doors are equipped with viewing windows. - Heidenhain AC drive motors in all axes with diagonal drive technology - INA RUE 45 linear guideway system in all axes with central lubrication - Ball screws (IT5) in all axes - Heidenhain direct linear measuring system in all axes - Telescopic covers for the X-axis guideways - Automatic cyclic lubrication for all axes and motion components - Work area lighting Refurbishment+ – what does that mean? The RefurbishmentPLUS line offers you a machine that has been uncompromisingly restored to its original technical and visual condition. All assemblies have been completely disassembled, repainted, and rebuilt with new, original spare parts. Cables, hydraulics, guides, spindles, rolling bearings – everything new!

Condition: good (used), Year of construction: 1975, Deckel FP1 tool milling machine, SK 40 spindle mount vertical, SK 40 horizontal, accessories: various collets and milling cutter arbors, counterholder, good working condition. Can be demonstrated under power by arrangement. Cgjbvpowg S Ndsm D Hot

Condition: used, Year of construction: 1976, Technical details: x-travel: 815 mm y-travel: 400 mm z-travel: 410 mm range of revolution per miute: 67 - 2300 / 8ste U/min feed continuous: 0,04; 0,08; 0,2 mm/U quill stroke vertical: 130 mm spindle taper: SK40 spindle head: drehen: 90° links/rechts spindle head: ausfahrbar: 315 mm spindle head swivable left - right: 40° vor / zurück ° Cgjbvpmsu R Uk Re D Hjt distance spindle nose and table: max. 450 mm distance spindle center to column: min./max.: 170 / 600 mm table surface area: 1120 x 255 mm total power requirement: ca. 1,17 kW weight of the machine ca.: 1100 kg machine dimensions LxWxH: ca. 1,7 x 1,6 x 2,2 m dimensions of hydaulic: L: 550 x B: 330 x H: 800 mm This machine is currently in the technical department. *

Condition: good (used), Year of construction: 2009, Ref. -No.: 10521 Manufacturer: LAGUN Type: CM 6 Year of construction: 2009 Type of control: CNC Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Spain X-Travel: 6000 mm Y-Travel: 1200 mm Z-Travel: 2000 mm C-Axis: 0,001 ° Rapid Traverse X/Y/Z: 30 m / min Table surface area (LxW): 7500 x 1100 mm Tool changer: 60 Cgjbvewfy Hnepm D Het Drive power spindle: 60 kW Table load max.: 5.000 kg Tool Taper: SK 50 Spindle Speeds: 6.000 RPM Further information: Automatic universal swivel head 1° x 1° incl. accessories, tools, holders 4th axis preparation (rotary table) Positioning accuracy: ± 0.030 mm Repeat accuracy: ± 0.010 mm Machine is in production and can be inspected under power at any time.

Year of construction: 2019, Condition: ready for operation (used), General Data Measurements width 1600 Measurements depth 7550 Measurements height 1450 Machine weight 5500 Main Drive Main motor power 4000 W / 5.5 PS Additional Equipment 2 carbide saw blades for aluminum and plastic Diameter: 420 mm, number of teeth: 96 Saw blade cooling equipment Small stop for the stationary head Profile lifting bars for the stationary and moving head Work piece support that can be moved on the machine bed Two cutting and oversize cutting software solution Software connection to production preparation program Pneumatic clamping unit, horizontal Roller track mounted on a moving head 1.5 meters, 300 mm wide General Data Measurements width 1600 Measurements depth 7550 Measurements height 1450 Machine weight 5500 Main Drive Main motor power 4000 W / 5.5 PS Additional Equipment 2 carbide saw blades for aluminum and plastic Diameter: 420 mm, number of teeth: 96 Saw blade cooling equipment Small stop for the stationary head Cgebveubfk Hopm D Hot Profile lifting bars for the stationary and moving head Work piece support that can be moved on the machine bed Two cutting and oversize cutting software solution Software connection to production preparation program Pneumatic clamping unit, horizontal Roller track mounted on a moving head 1.5 meters, 300 mm wide This 3-axis Elumatec SBZ 131 pipe saw was manufactured in 2019. It features a 7.2-meter cutting length, 4-axis control for precise aluminum and steel processing, and a revolver head with storage for 8 tools. The machine ensures operator safety with a light barrier and protective grid. It's ideal for complete profile processing without moving the raw material. Buy this Elumatec SBZ 131 pipe saw for efficient and accurate work. Contact us for further details regarding this pipe saw. Application Types Milling

Condition: excellent (used), Year of construction: 1998, Functionality: fully functional, Tool Milling Machine Deckel FP 4 M Aktiv Item number: 07-07-235 Manufacturer: Deckel Very good overall condition Workshop-tested machine Delivery time: Immediately – subject to prior sale Year of manufacture: approx. 1988 Dimensions (L x W x H): approx. 2300 x 1800 x 1800 mm Cgsbvewfxf Njpm D Hjt Weight: approx. 1750 kg Digital Readout: 3-axis "AKTIV" digital readout (Heidenhain TNC 113) 4th axis with additional digital readout (Heidenhain) Travel distances: X-axis: approx. 500 mm Y-axis: approx. 400 mm Z-axis: approx. 400 mm Table clamping surface: approx. 700 x 400 mm Spindle: Speed range: approx. 50–2500 rpm Tool holder: ISO 40 Drive power: approx. 6.0 kW Automatic tool clamping Feeds and rapid traverse on all 3 axes Feed range: approx. 8–630 mm/min Rapid traverse: approx. 3.0 m/min Accessories: 4th axis rotary table Vertical and horizontal milling attachments Angle milling head Quill (stroke approx. 120 mm) Coolant system Complete machine documentation Various clamping wrenches Horizontal spindle cover Safety handwheels Central lubrication system Emergency stop Swiveling control panel Spindle brake Further accessories available on request. Price and additional technical details available upon request.

Condition: reconditioned (used), Year of construction: 2012, Functionality: fully functional, travel distance X-axis: 10,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, spindle speed (min.): 20 rpm, table length: 12,000 mm, table width: 1,350 mm, year of last overhaul: 2025, RepaitFIT by Dornhöfer The difference. Including installation and commissioning! Technical details of the machine: Year of manufacture: 2012 Control: Heidenhain iTNC 530 Travel range: X-axis (mm) 10,500 Y-axis (mm) 2,000 Z-axis (mm) 1,500 Table size: Length: 12,000 Width: 1,350 Spindle speed range: 20–4,000 rpm Cjbev R Tpuevpm D Hsgt Feed rates: Max. rapid traverse speed X, Y & Z axes (mm/min): 25,000 Milling head: Orthogonal milling head, 1° pitch H41 Tool holder: ISO 50, DIN 69871 Form AD Main spindle drive power: 100% duty cycle 43 kW - Chip conveyor - Internal coolant system (Lubrix) - Automatic tool changer with 40 magazine positions - Portable HEIDENHAIN HR 410 electronic handwheel - 3D thermal expansion compensation - Heidenhain interpolation turning RepairFIT is our proven offering for a profitable entry into our product lines. The machines available in this line are procured by us following a rigorous selection process and subjected to a thorough inspection (deep dive check). After intensive cleaning, any obvious defects and faults identified are professionally repaired by our expert service team.

Condition: good (used), Year of construction: 1980, Deckel FP1 Active milling machine with 3 axes, Heidenhain digital display, and angle table. SK 40 spindle mount. Good working condition, ready for demonstration under power upon request. Csbvpm Dewg S I Ts Hjgt

Condition: used, Technical details: Cjbsu U E T Ievpm D Hjgt x-travel: 600 mm y-travel: 300 mm z-travel: 360 mm range of revolution per miute: max horiz. 40- 2000 U/min spindle taper: vert. / horiz. SK 40/ SK40 range of revolution per miute: max zul. 40 - 2000 U/min feed:: 2-3600 mm/min quill travel: 80 mm Table dimensions: 810 x 420 mm total power requirement: 3 KVA machine weight approx.: 1300 kg dimension machine xH: 1,8 x 1,35 x 1,95 m

Condition: new, Year of construction: 2025, Ref. -No.: 10464 Manufacturer: IGREK Type: 3500 XXL Year of construction: 2025 Type of control: CNC Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 10500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° B-Axis: 360 ° Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Spindle Speeds: 12500 RPM Machine length: 16000 mm Machine width: 7400 mm Machine Height: 8500 mm Weight: 195 t Cgebvpm Dewfy Dge Het Further information: GREK 3500 XXL – Customized precision for large-scale projects The IGREK 3500 XXL is a CNC 5-axis portal milling machine of the latest generation, developed for the high-precision machining of large components. Built in 2024, it is ready for immediate use and equipped with the latest technology to meet the most demanding requirements in heavy industry and mechanical engineering. Key features: Gigantic machining areas: With travel distances of 10,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine offers extraordinary flexibility for machining large parts. 5-axis simultaneous machining: The A-axis with +/- 115° and the B-axis with 360° guarantee maximum precision and versatility when machining complex workpieces. Powerful spindle: Equipped with a speed of up to 12,500 rpm, a maximum torque of 235 Nm and a drive power of 54 kW – ideal for high-performance machining. Robust and durable: Weighing 195 tons and with a table load of up to 4,000 kg, the machine is designed for heavy-duty machining. Innovative tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and increases efficiency. Speed and efficiency: Rapid feed rates of 30 m/min on all axes ensure maximum productivity. Technical data at a glance: Traverse paths: X 10,500 mm / Y 3,500 mm / Z 1,400 mm Spindle power: 54 kW Spindle speed: 12,500 rpm Table load: up to 4,000 kg Machine dimensions (LxWxH): 16,000 x 7,400 x 8,500 mm Weight: 195 tons Additional benefits: The machine is supplied with the advanced Siemens 840D or Heidenhain iTNC 640 control system and offers worldwide warranty and service support from the manufacturer. Choose the IGREK 3500 XXL for precision and efficiency in the machining of large parts. Contact us now for a non-binding offer!

Condition: ready for operation (used), Year of construction: 2008, operating hours: 38,118 h, Control Unit Brand SIEMENS Model 840 D Cgsbvowfupqspm D Het Main Drive Spindle speed range 6000 rpm Spindle motor power 36 kW Movement X-Axis Movement 10000 Y-Axis Movement 2500 Z-Axis Movement 1000 Additional Equipment Number of Tools: 170 This 3-axis Unisign UNIPORT 6000 was manufactured in 2008. A Gantry milling machine designed for precision and versatility in complex machining tasks. Consider the opportunity to buy this Unisign UNIPORT 6000 Gantry milling machine. Contact us for more information about this machine. Application Types Milling

Condition: like new (used), Year of construction: 1996, Retrofitted: 2025 Numerical control: NUEVO/NEW HEIDENHAIN TNC-320 Technical features Dimensions Dimensiones mesa: 6.000 x 2.000 mm Número de ranuras T: 13 Medidas ranuras T: 22 mm Traverses of axis Recorrido longitudinal X: 6.000 mm Recorrido transversal Y: 3.800 mm Recorrido vertical Z: 1.000 mm Capacidad vertical (VC): 500 / 1.500 mm (salida directa) Distancia entre columnas: 3.100 mm Milling head Cabezal universal (UM40 – Cuerpo B: manual / Cuerpo C: 3º auto-indexado) y Salida directa Amarre herramienta: Hidráulico Cono: ISO50 (DIN-69871)  /  Tirante: DIN-96872 Gama de velocidades: 3.000 rpm Potencia mandrino: 30 kW Feedrates Avances rápidos (X / Y,Z): 7.200 / 12.000 mm/min Weight and dimensions Peso aproximado máquina: 50.000 Kg Peso máximo sobre mesa: 15.000 kg Dimensiones aproximadas máquina: 14.740 x 5.330 x 5.050 mm Accesories Carenado: 2 puertas correderas con nuevo vallado perimetral de seguridad Cambio de cabezales: automático con bisagra/soporte lateral en columna Evacuador de virutas: 2 longitudinales por paletas Volante electrónico: Nuevo HR-510 Taladrina: Externa e interna alta presión a través del mandrino (interna sólo con la salida directa) Cgebvpm Dswfunyj Hjt Sales conditions Garantía: Repuestos mecánicos 6 meses Precio y condiciones de venta: Consultar View all technical features

Condition: reconditioned (used), Year of construction: 2015, Functionality: fully functional, travel distance X-axis: 10,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,500 mm, rapid traverse X-axis: 25,000 m/min, rapid traverse Y-axis: 25,000 m/min, rapid traverse Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, RepaitFIT+ by Dornhöfer The difference. Including installation and commissioning! MAIN TECHNICAL DATA Year of manufacture: 2015 Capacities / Travel: Longitudinal (X): 10,000 mm Vertical (Y): 3,000 mm Transverse (Z): 1,500 mm Paint finish: Graphite gray RAL 7024 / Agate gray RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Taper: DIN 69871 Cjbvpm Dsv R Hwrs Hjgt Main drive: Motor / Make: Siemens Main spindle drive Tap: 1PH7 Maximum drive power: From 198 rpm 100% duty cycle KW41 Maximum torque: Constant up to 198 rpm 100% duty cycle 1920 Nm Speed control / Gearbox: 3-stage (oil-cooled) With automatic Switching Spindle speeds 4000 rpm: low range rpm 0 - 516 medium range rpm 460 - 1,288 high range rpm 1,200 - 4,000 Axis drives/axis feeds: Axis drive motors: Maximum rapid traverse: (X/Y/Z axis) 25,000 mm/min Maximum working feed: (X/Y/Z axis) 15,000 mm/min Maximum feed force: (X-axis) 35,000 N (Y/Z axis) 32,000 N Axis drive systems: X-axis (longitudinal) pinion/rack (Atlanta brand) Y-axis (vertical) ball screw (preloaded) Ø 63 x 20 Z-axis (transverse) Ball screw (preloaded) Ø 50 x 20 Weight: (without clamping table/plate area) approx. 49,500 kg Connection cable: approx. 60 kVA Innotrol HBG wireless handwheel Automatic tool changer with 60 magazine positions BIG Plus tool spindle Operator platform with height adjustment of 1800 mm and transverse adjustment of 800 mm Interface for adapter milling heads RepairFIT+ – what does it mean? With RepairFIT+, we offer you a profitable and safe entry into our product lines. Our machines undergo a rigorous selection process, undergo a comprehensive deep-dive inspection, and are thoroughly cleaned by our experts. All identified defects, both technical and cosmetic, are professionally repaired so that the machine is presented in perfect condition.

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12056, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Cobvpswg D Rasm D Hogt

Condition: new, Year of construction: 2025, Ref. -No.: 10463 Manufacturer: IGREK Type: FR 3500 XL Year of construction: 2025 Type of control: CNC Cgobvpmewfy Dae D Hst Control: Siemens 840 D / Heidenhain iTNC 640 Storage location: Istanbul Country of origin: Türkiye X-Travel: 6500 mm Y-Travel: 3500 mm Z-Travel: 1400 mm A-Axis: +/- 115 ° C-Axis: 360 ° Turning Speeds: 12500 RPM Max. Torque: 235 Nm Rapid Traverse X/Y/Z: 30 m / min Table-Size (Lxw): 2290 - 6490 x 3580mm mm Drive power spindle: 54 kW Table load max.: 4000 kg Tool Taper: HSK-A100 Machine length: 11500 mm Machine width: 7400 mm Machine Height: 6600 mm Weight: 120 t Further information: IGREK FR 3500 XL – Precision and performance at the highest level The IGREK FR 3500 XL is a CNC-controlled 5-axis portal milling machine of the latest generation (year of manufacture 2024). It was specially developed for the demanding machining of large workpieces and impresses with its versatility and precision. With a modern control system from Siemens 840D or Heidenhain iTNC 640 and a robust construction, the machine offers optimal conditions for manufacturing in a wide range of industries. Key features: Large machining areas: With travel distances of 6,500 mm (X), 3,500 mm (Y) and 1,400 mm (Z), the machine is ideal for machining large components. 5-axis simultaneous machining: The A-axis with a swivel range of +/- 115° and the C-axis with a rotation of 360° enable highly precise machining of complex geometries. Powerful spindle: The spindle reaches speeds of up to 12,500 rpm and a maximum torque of 235 Nm – perfect for demanding milling work. High stability: The machine weight of 120 tons and the table load of up to 4,000 kg ensure low-vibration machining even with heavy workpieces. Flexible tool holding fixture: The HSK-A100 tool holding fixture enables quick tool changes and optimal process times. Rapid feed rate: High productivity is achieved with 30 m/min in the X, Y and Z directions. Technical data at a glance: Table size: 2,290 – 6,490 x 3,580 mm Spindle power: 54 kW Max. torque: 235 Nm Tool holder: HSK-A100 Machine dimensions (LxWxH): 11,500 x 7,400 x 6,600 mm Max. table load: 4,000 kg The IGREK FR 3500 XL sets new standards in the machining of large parts. It is available immediately and offers comprehensive warranties and services directly from the manufacturer, internationally and across the board. Use the latest technology for your production – contact us for further details!

Year of construction: 1998, Condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Cebvpm Dswfuqhs Hogt Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 1200, manufactured by Lagun, type FBF 1200, year of manufacture 1991, serial no. A12054, control system by Lagun CNC, T-slot clamping table approx. 600 x 1,250 mm, travel distances approx. X: 1,100 mm, Y: 600 mm, Z: 600 mm, swiveling milling head Cgsbvpowg D N Aom D Hjt

Condition: good (used), Year of construction: 2012, Ref. -No.: 10290 Manufacturer: KOLB KLUEPPELBERG Type: Cubimat YC 2000 Year of construction: 2012 Type of control: CNC Control: Siemens Sinumerik 840 D Storage location: Halberstadt Country of origin: Deutschland Machine number: 016453-20.1 X-Travel: 7000 mm Y-Travel: 4000 mm Z-Travel: 4000 mm W-Travel: 2.000 mm Speed work spindle: 4.000 RPM Max. Torque: 2.100 Nm Max. Workpiece Weight: 20 t Table-Size (Lxw): 2.800 x 2.000 mm Cgobewfyxwjvpm D Hot Tool Taper: SK 50 Distance Between Columns: 3.200 x 4.000 mm Further information: 4 Milling Heads available.

Condition: used, 1 x 3-axis CNC universal bed milling machine Lagun FBF 3250, Lagun type FBF 3250, control system Lagun CNC, T-slot clamping table approx. 700 x 3,250 mm, travel paths approx. X: 3,000 mm, Y: 940 mm, Z: 1,000 mm, swiveling milling head Cjbvpewg D I Ejm D Hogt