Universal Milling Machine

DECKEL FP3

Condition: good (used), Internal Item No.: 25110 Universal Milling Machine Deckel FP3 Machine No.: 2482 + 3-axis digital readout + Safety guard with switch (UVV) + Machine lamp + Various SK40 tool holders and collet set (S20x2) Milling table: 800 x 420 mm Spindle taper: SK40 Max. speed: 2000 rpm Drive power: 3 kW Travel X/Y/Z: 500/300/400 mm Dimensions (LxWxH): 1400 x 1500 x 1800 mm Kedpfx Asyb Su Ued Njwt Weight: approx. 1500 kg The machine is fully functional and can be demonstrated under power by arrangement in a heated storage area of over 500 m².

Condition: used, Year of construction: 2014, power capacity 3 kW feed pressure 7 bar liter capacity / l weight 286 kg Chicago Pneumatic CPVR15 CE screw compressor - Year of manufacture 2014 The CPVR15 CE impresses with its robust design, long service life and low operating costs. Whether in workshops, workshops or industrial applications - this compressor reliably supplies you with the compressed air you need. Drive power: 3 kW Delivery pressure: 7 bar Kjdpfsh A Sfdex Ad Njwt Air output: up to 58 CFM (approx. 1,640 l/min) at 7 bar Weight: 286 kg Dimensions: approx. 965 mm (L) × 620 mm (W) × 1,040 mm (H) Operating noise: approx. 50-58 dB(A) Voltage/frequency: 415 V / 50 Hz Application: Workshops, craft businesses, industrial applications with medium compressed air requirements Included in delivery: 1x compressor - Chicago Pneumatic CPVR15 CE 1x refrigeration dryer - OMI ESD 108 - 0.70kW 1x Beko Öwamat 2 - oil-water separator Technical data was taken from publicly available sources

Condition: good (used), Year of construction: 1985, functionality: fully functional, machine/vehicle number: 2803-2693, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 6,300 rpm, spindle speed (min.): 32 rpm, quill stroke: 80 mm, quill travel distance: 80 mm, type of input current: three-phase, Equipment: documentation/manual, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with a Dialog 4 CNC control system. The machine is German-made, renowned for its quality, and is suitable for tool and mould making as well as precise single-part and small-batch production. Technical Data (extract) Model: FP3NC Control: Deckel Dialog 4 Year: 1985 Serial Number: 12767 Main spindle power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill Stroke (manual): 80 / 80 mm (horizontal/vertical) Travel paths: X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, 63 mm spacing Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Equipment & Control - 4-axis contouring operation with dialog-guided input - 3D linear and circular interpolation, helical interpolation, polar coordinates - Extensive drilling and milling cycles, graphical cycle entry support - “Contour pocket” milling cycle for pocket machining (including irregular shapes and islands) - Subroutine functions, program memory up to 512 kByte - Tool offsets for up to 100 tools - Interfaces for cassette recorder, punch tape reader, floppy disk or Winchester drive (DNC-capable) Condition & Features - Machine is fully functional Kodpoxlghpofx Ad Nswt - High-precision, stable design – ideal for workshops, training or production - Operating manual and technical documentation available - Inspection by appointment possible

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 Kwjdpfx Adexuh Rde Nst - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual

Condition: used, Year of construction: 2015, operating hours: 2,485 h, machine/vehicle number: 0300212166, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.850 kg Ksdpfx Adetr Itbe Newt Mast: articulated arm Lifting capacity: 230 kg Working height: 2.050 cm Max. horizontal reach: 1210 m Transport dimensions (LxWxH): 8.55x2.45x2.85 Please contact PFEIFER GROUP for more information

Condition: good (used), functionality: fully functional, Product type: Milling machine Space requirements: 1800 x 1700 x 1950 mm CNC control: CNC 2102 MPN: FP 3 A Overall length: 1700 mm X-axis travel: 500 mm Serial number: 2206-0546 Manufacturer’s part number: FP 3 A Required power (kW): 22 kW Overall width: 1800 mm Machine weight (kg): 1950 kg Function: Milling Y-axis travel: 300 mm Z-axis travel: 400 mm Overall height: 1950 mm Voltage: 380 V Maximum spindle speed (rpm): 2001 - 2500 rpm Brand: DECKEL Brand: Deckel Maho Country/Region of manufacture: Germany Control type: CNC Model/Type: FP 3 A Kwjdpfoya Iwcjx Ad Not Spindle power: 22 kW Year of manufacture: 1981

Year of construction: 1987, condition: ready for operation (used), A CNC universal milling machine Deckel is available. Travel X/Y/Z: 400mm/400mm/400mm, table dimensions X/Y: 700mm/460mm, max. table load: 350kg, tool holder: SK40, quill stroke: 80mm, speed: 4000rpm, feed rate: 3600mm/min, rapid traverse: 4m/min. Machine dimensions X/Y/Z: approx. 1800mm/1800mm/2200mm, weight: approx. 2500kg, control: Contour 3. The tool change magazine is no longer in operation. Documentation available. An on-site inspection is possible. Kwedoya Hw Uspfx Ad Not

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Ksdpfx Ajvvkt Ijd Nswt

Condition: like new (used), functionality: fully functional, Universal milling machine Deckel FP3 with new 3-axis FPS active digital display Heidenhain General overhaul by FPS 2015 Mint condition Technical data: >> Year of construction 1980 Machine no. 2201-5045 >> Rigid angle table >> Speed: 25 - 2500 rpm >> Infinitely variable feed in 3 axes >> rapid traverse in 3 axes >> Drive power .:2,0 / 4,0 KW >> Spindle brake >> Travel X/Y/Z: 500/300/400 mm >> Vertical milling head can be moved 200 mm on headstock >> Vertical quill and horizontal quill - SK40 extendable >> Tightening system M16 >> Weight approx. 1500 kg Accessories and equipment: >> 3 axes active digital display Heidenhain (latest version) >> Coolant device >> Central lubrication Ksdou Dm E Hjpfx Ad Nowt To the machine : On offer is a Deckel FP3 universal milling machine in mint condition. The FP3 was overhauled by FPS in 2015 and has only been used a little since then. The machine has little crank play and all spindles can be moved easily. On this newer FP3 model, the feed is infinitely variable in three axes, and the machine also has a rapid traverse for each axis. A major advantage is the active 3-axis digital display. With this Heidenhain line control you can enter dimensions which the machine automatically approaches. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes work easier and even more precise. Take the opportunity to inspect and try out this machine on site under power. The machine is available immediately.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP3L with 3-axis digital display K&C NEW, very good condition Technical data: >> Year of manufacture approx. 1975 Machine no. 0924 >> Rigid angle table (clamping surface 1000 mm x 440 mm) >> Speed: 40 - 2000 rpm >> Feed and rapid traverse in 3 axes >> Feed from 10 to 500 mm/min >> Rapid traverse 1500 mm/min in all feed directions >> Drive power: 2.2 KW >> Travel X/Y/Z: 800/300/400 mm (travel Y can still be moved by 200) >> Equipment: Vertical & horizontal spindle >> Vertical quill and horizontal quill extendable SK40 >> Tightening system S20x2 >> Weight approx. 1900 kg Accessories and equipment: >> 3-axis digital display K&C Newly installed with manufacturer's guarantee and operating instructions. Display device: reference points, setting zero points, entering coordinates, mm/inch switching, absolute or incremental coordinates, circular functions, rows of holes, radius milling functions, etc. >> Mechanical central lubrication >> Operating instructions >> Hydraulic vice 160mm >> Walter rotary table 500mm About the machine: A Deckel FP3L universal milling machine in very good condition is offered. The vertical head can be moved by 200 mm to allow an even larger working area. A central pump ensures the lubrication of the various axes. The special feature of this type of machine is the basic structure; it is a machine with an inclined table bed. The movements are assigned to the work spindle and thus to the tool. The accuracy is therefore very high, since different workpiece weights have no influence on the axis movements. Mechanically and electrically tested. Take the opportunity to view and try out the machine on site with power on. Kwedpfjvn N Hdox Ad Not

Condition: new, - Semi-automatic - Hydraulic - Infinitely adjustable band saw speed - Double miter - Hydraulic clamping of the miter setting - Hydraulically adjustable sawing pressure - Fully hydraulic material clamping - Hydraulically adjustable clamping pressure - Cooling system - Automatic switch-off - Automatic switch-off of the machine at Kjdpfjvkkl Tox Ad Nswt open cover, torn belt, reduced belt tension - Emergency stop - Documentation - 400V

Condition: used, Flat belt pulley, toothed pulley, multi-belt pulley -Spare part comes: from a machining center cover type FP3A -Diameter: 80 mm -Recording: 28 mm -Dimensions: 80/80/H61 mm Ksdpfx Aeffh Nzod Nowt -Weight: 1.2 kg

Condition: used, Rotary encoder, tachometer, encoder -Spare part comes: from a machining center cover type FP3A -Number: 1x speedometer available -Price: per piece Kwedpfoffh N Aox Ad Net -Dimensions: 83/122/H95 mm -Weight: 1.1 kg

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm -Projection: 930 mm Kwodpfx Asirax Ujd Njt -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Year of construction: 1975, condition: good (used), Cover FP3L with.adjustable angle table , vertical milling head,SK 40 S20x2 spindle mount . Good working condition. After consultation under power ready for demonstration. Kjdpjildwxofx Ad Newt