Used Machining centers with traverse tables for sale (205)

Condition: good (used), Year of construction: 2000, I sell the 3-axis CNC working centre HOLZ-HER ECO-MASTER 7113 with beam table Year 2000. Configuration: 3-axis main spindle 7,5 KW Tool magazine 4 positions HSK63 1 grooving saw X-direction Drilling head 9+2 spindles Useful working area 2300 x 1000 x 130mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump RIETSCHLE 2,2 KW Bwelqzett Sy Ho Rrxjl Good condition. Available immediately.

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Bslqjvr A A Tjz Rrxowl Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: repair required (used), Year of construction: 2012, Functionality: fully functional, spindle speed (max.): 24,000 rpm, input voltage: 400 V, Machine in good condition, spindle to be repaired Machine price loaded on truck. Spindle repair possible on estimate Bslqz Rrovrtkhexewl Assembly possible on estimate

Condition: used, Year of construction: 2011, CNC machining center Homag type BMG 511/60/12/F/AP including extensive tools, with 5-axis spindle, two machining stations and reinforced vacuum pump. tool magazine: 30 speed, derailleur projection laser: Yes software: WoodWop 6.1 Further data: On demand main spindle: 5-axle / 12 kW / Drive 5C+ X axis: max. 6,000 mm or 2 x 2,375 mm// 60 m/min Y-axis: max. 1,550 mm // 60 m/min Bwolqz Rrjvdupijxol Z-axis: max. 600 mm // 25 m/min

Condition: like new (used), Year of construction: 2011, operating hours: 1,000 h, Functionality: fully functional, machine/vehicle number: AA1/016508, SCM 3-axis machining center, Tech Z1-26a, very little used was purchased as a demonstration machine and only used by us as a replacement machine. Is dismantled but can be demonstrated on request Reason for sale: dissolution of the joinery Bwslqzsnfvqws Rrxjl

Year of construction: 2023, Condition: new, machine/vehicle number: MR005063, Maximum technology with limited space requirements. Four-axis CNC machine with bumper protection, to be used for panel machining and solid wood. Machine with industrial designed frame, heavy duty, maximum precision on operations. Equipped with Easy2Go modern interface.Machine is equipped with the following options: - Machine conforming to CE regulations - Automatic lubrication system - Suction hood main motor 3-position adjustable - Tool length control Belqzoqw U D Re Rrxswl Technical specifications: - Maximum panel thickness : 180 mm - Maximum panel length : 3115 mm - Maximum panel width : 1320 mm - Machine table : Beams with vacuum cups - Safety system : Bumper protection - Number of drilling spindles vertical : 12 piece - Number of horizontal drilling spindles (over Y-axis) : 2 piece - Number of horizontal drilling spindles (over X-axis) : 4 piece - Power milling motor : 13 hp - Milling spindle change : HSK63F - Tool changer positions : 11 piece - Milling spindle speed : 24000 /min - Tool length measuring system : Yes - Serial number : AH00006001

Condition: good (used), Year of construction: 2009, I sell the 3-axis CNC working centre HOLZ-HER PRO-MASTER 7023 with beam table Year 2009. Configuration: 3-axis main spindle 6 KW Tool magazine 8 positions HSK63 1 grooving saw X-direction Drilling head 16+4+2 spindles Bolqz Rrott S D Rjxjwl Useful working area 3200 x 1060 x 378mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Holzher software controller with full instructions. Pump BECKER 250 m3/hr. Good condition. Available immediately.

Condition: good (used), Year of construction: 2001, Functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: Bjlovmywqoqz Rrxewl - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, Year of construction: 2013, Functionality: fully functional, Manufacturer: MAXICAM CNC Technology., LTD Machine type: CNC cutting edge Year of manufacture: 2013 Made in: China Specification: 4 axis; Table size 6100x2400 mm; Working dimensions 5500x2200x180 mm; OSAI controller; Welded steel table and gantry for maximum straightness and rigidity; 9.5Kw Air Cooled HSD Spindle with dust extraction foot; 8 Position rotary style tool rack for Automatic Tool Change System to suit HSK 63F tool holders; Vacuum table with independent working zones; Becker Vacuum Pumps; Automatic tool length setting sensor Electronic Parts：German Schneider Electronic Spare Parts Belqz Rrevlnx Hsxswl Switch gear: Japanese OMRON Switch German Igus highly flexible cables throughout the wiring loom high flow double layer phenolic vacuum matrix table (single layer standard) Machining speeds up to 25m/min Voltage: 3 PH, 380 V, 50 HZ Power: 21 KW Spindle power: 9 KW Dimension/m: 6.1 x 2.4 x 2.5 m Weight: 3100 KG Suitable materials: MDF, MDP, LMDP board, solid wood board, Plastic, Aluminium

Condition: used, CNC machining center Eima for machining wood. Special price for self-assembly. Technical data: On request Bwolor D T Nbsqz Rrxol

Year of construction: 1998, Condition: good (used), Full composition Bwjlef Sqyveqz Rrxol

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, Functionality: fully functional, workpiece diameter (max.): 40 mm, overall weight: 2,100 kg, spindle speed (min.): 2 rpm, spindle speed (max.): 60 rpm, spindle diameter: 54 mm, positioning accuracy: 0.01 mm, roll diameter: 200 mm, thread length: 160 mm, working stroke: 25 mm, Equipment: documentation/manual, Incl. various tool sets Bwolqz Rsu U Hb Torxjl

Year of construction: 2000, Condition: excellent (used), I sell the 4-axis milling head CNC working centre HOMAG Joker BAZ41 with beam table, year 2000. Bwslqz Rjg Im Dkorxsl Configuration: 1x 4-axis main spindle 12kW S6 750-18.000 rpm water cooling ! Tool change chain system 12 Posizions HSK63 Drilling head 12 spindles in Z-direction Useful working area 3225x1660mm x Z 450mm. 2 working zones Automatic system for central lubrication WoodWop 4.5 software. CE and full documentation included. Fully working with all working heads and equipment. Without Pump ! Available immediately.

Condition: good (used), Year of construction: 1999, Functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Bolqz Rrjvmpx Rsxowl Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: ready for operation (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 18151, travel distance X-axis: 4,500 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 180 mm, No reserve price - guaranteed knockdown to the highest bidder at the end of the auction! Under power until the end of August TECHNICAL DETAILS Travel X: 4,500 mm Y travel: 1,300 mm Z travel: 180 mm Number of vertical drilling spindles: 20 pieces Number of horizontal drilling spindles: 8 pieces Motor power: 1.7 kW Milling unit: 7.5 kW Horizontal milling unit: 3.7 kW Horizontal speed: 18,000 rpm Sawing unit 0°/90°: 3.7 kW Diameter: 180 mm Sawing unit 0°/90°: 3 kW Diameter: 160 mm Tool magazine: 10 slots Tool diameter: 160 mm MACHINE DETAILS Weight: 430 kg Bwjlqzovhcc Es Rrxjl Installation dimensions: approx. 4 x 7 m (excluding control unit) Transport dimensions: 6,540 x 2,38 x 2,440 mm Operating voltage: 380 V AC, 50 Hz Power: 20 kW Vacuum pump output: 120 m³/h EQUIPMENT - 10 chucks

Condition: used, SCM TECH 99 L CNC machining center with lock case milling unit Machine is FUNCTIONAL and ready for demonstration Bwslqzsu Nf Ece Rrxol from PENSION/trade workshop Ex location joinery, as inspected NET € 14.000,00

Year of construction: 1999, Condition: excellent (used), CNC machining centre with features as in the manual photograph. Bakelite plans excluded and optional separately. Bslqz Rjfd Tz Serxewl The machine is still in operation at our customer's premises. Arriving in our warehouses between the end of February and mid-March. Excellent condition, held by amateur.

Condition: excellent (used), Year of construction: 2004, 4-axis machine with console table, 6 supports manually movable in X, 3 vacuum cups per console, vacuum pump 100m³/h Vacuum connection for templates LED display for suction cup position display Working range X: 200 - 3250 mm Working range Y: 70 - 1220 mm Working range Z: 12 - 100 mm (passage 150 mm) 12 vertical drilling spindles 6 horizontal drilling spindles, 4 of which in X direction and 2 in Y direction. Grooving saw in X-direction Milling spindle 12 kW up to 24000 rpm with C-axis 360° interpolation, liquid circulation cooling - WZW 8-fold front and 8-fold rear Tool changing aid at the front right POWERCONTROL PC 85T control unit with TFT 17″ WoodWop 5.0 incl. MDE and production list software Operating terminal Adapter units (included in the scope of delivery): Bwslqzstv D Elj Rrxol -Lock box 2 spindles with blow-off nozzle Barcode scanner

Year of construction: 2001, Condition: good (used), I sell the 3-axis CNC working centre HOLZ-HER UNI-MASTER 7226 with beam table Year 2004. Configuration: 3-axis main spindle recently full reconditioned / Water cooled Tool magazine 6 positions HSK63 on working head 1 grooving saw X-direction Drilling head 16+4 spindles Useful working area 3100x1360mm. 2 working fields, 4 clamping areas Bslqoi U Dxuez Rrxswl Automatic central system of lubrication. Holzher software controller with full instructions. 2x Pump SIEMENS ELMO-L S22 2,35KW. Good condition. Available immediately.

Condition: like new (used), operating hours: 30 h, ONLY 30 OPERATING HOURS Technical details: Operating range Standard: X-axis (longitudinal): 3080mm Y-axis (lateral): 1540mm Z-axis (height): 200mm Optional: X-axis (longitudinal): 5080mm Y-axis (lateral): 2050mm Z-axis (height): 400mm speed: X-axis (longitudinal): 60m/min Y-axis (lateral): 30m/min Z-axis (height): 15m/min Spindle motor with tool change: Power: 11kW Cone: HSK63 Bslqzotvdryo Rrxowl max. speed: 24000rpm Dimensions and weight: Frame: 1570x4150mm Length: 4460mm width:3000mm Height:2400mm

Condition: excellent (used), Year of construction: 1997, Rover 20 machining center Working area 2,893 x 950 mm, milling spindle with ISO30 tool holder 3.6 kW, drilling unit with 10 vertical and 6 horizontal drills as well as grooving saw, 6-fold tool changer. The NC410 control had a floppy disk drive and a colour screen as well as the simplest, graphically supported programming options. Furthermore, the Rover 20 already enabled pendulum machining. Dimensions: approx. 3800 x 2000, height 1600 Control cabinet: 950 x 700 x 1300 Bolqz Rrelc Dwnsxswl From location

Year of construction: 2002, Condition: not inspected (used), C.N.C. MACHINING CENTER WITH 4 INTERPOLATING AXES - ELECTRONIC PANTOGRAPH BIESSE SPA ARROW ATS - NC 1000 YEAR 2002 EXCELLENT STATE OF USE AVAILABILITY AT OUR WAREHOUSES - ALWAYS AND ONLY EXCEPT SOLD DESCRIPTION : MACHINERY 4 INTERPOLATING AXES WORKING FIELD 3,012 x 1,549 x 270 MM PIECE PASSAGE AXIS TRAVEL X = 4,300 MM; Y/W = 1,600 MM; Z=300 MM MONOLITHIC STRUCTURE MADE OF HEAT-SEALED STEEL WITH THERMAL STABILIZATION X, Y and W AXES SPEED MAX 80 M/MIN; Z MAX 25 M/MIN AUTOMATIC LUBRICATION OF RECIRCULATING BALL BEARINGS AND NUTS CNC CONTROL NC 1000 WITH PC OFFICE WINDOWS AND COLOR MONITOR WORKTABLE NO. 08 BAR TYPE ATS TABLE WITH ELECTRONIC DISPLAYS AND 32 ATS TROLLEYS VARIOUS ATS VACUUM MODULES REAR, INTERMEDIATE AND SIDE REFERENCE STOPS LOW STOP CONTROL SENSORS NO. 01 250 M3/H VACUUM PUMP Bolqz Rrjpciryoxswl OPERATING HEAD WITH: - NR. 02 ELECTROSPINDLES P = 13.5 KW (18.4 HP); HSK 63F; V MAX 20,000 R.P.M. CERAMIC BEARINGS AXIS SETTING AND FLOTATION ELECTROSPINDLE (COPYING) EM2 4TH "C" AXIS WITH 0° - 360° ROTATION BY GEARS EM2 NR. 02 AUTOMATIC TOOL CHANGER WITH NR. 10 STATIONS EACH BH24L BORING HEAD WITH 18 VERTICAL, 06 HORIZONTAL SPINDLES AND FIXED BLADE UNIT IN Y SAFETIES CE STANDARDS WITH FRONT SENSITIVE MATS AND ANTI-INTRUSION NETS POWER SUPPLY 400 VOLTS THREE-PHASE, 50 HZ, I=90 A, P=49 KW MAX ELECTRICAL/ELECTRONIC CABINET EQUIPPED WITH AIR CONDITIONER DIMENSIONS 6,900 x 5,300 MM ABOUT WEIGHT 9,000 KG

Condition: excellent (used), Year of construction: 2006, Homag BOF 311/60/PM CNC machining center for solid wood and furniture parts, construction elements such as windows/doors and stairs Processing 6000 x 1730/1600 x 300 mm (80 mm with standard vacuum suction cups); processing depth in y 1450/1525 mm at the front stops Console table with 11 consoles, 3 lifting rails and vacuum suction cups Quick-Move system: automatic console positioning in x-direction 11 pneumatic clamping elements, 3-stage for scantlings, clamping range 15-120 mm 11 clamping aids for rungs and narrow parts, can be lowered pneumatically 2 pcs. Vacuum pumps 66/100m³/h Control: power control PC85 with WoodWop 6.0 incl. WoodWop window/front door software (industry program) 17 inch TFT screen, Windows XP for processing: Main spindle 15 kW 1500 - 24,000 1/min with C-axis and extension for Flex 5 unit HSK 63 tool holder Tool changer: 30-position disk changer on the x-support, Drilling head 12 spindles: V12/H4 ; of which 6 drilling spindles in X-direction and 7 drilling spindles in Y-direction Adapter units included in the scope of delivery: Sawing unit 200 mm drm 4-spindle cross head (drilling, milling) 2-spindle lock case unit Chip conveyor belt Bslqoun Nwfjz Rrxjwl DOCUMENTATION AND CONTROL TEXTS: GERMAN

Condition: good (used), Year of construction: 2012, I sell the 5-axis CNC working centre Biesse Rover C6.40 with beam table, year 2012. Configuration: 5-axis main spindle HSD 15KW/S6 (12KW/S1) / Water cooled Bolqeq Dkc Sjz Rrxewl Tool magazine 22 positions HSK63 on moving head Drilling head 5+2+2 spindles Useful working area 3400x1570mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Automatic system for outfeed of waste material with band conveyor Additional vacuum outputs for raster works or connection of additional clamping devices. Pump Becker 250/300 m3/h. 5,5KW. Biesse Works software controller with full instructions. Total power 40kW Total weight 5100kg Good condition. Available immediately.

Year of construction: 2004, Condition: good (used), I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head Bwolqz Rjh Txlcjrxsl