Used Biesse for sale (321)

Condition: not inspected (used), Year of construction: 2009, functionality: unexamined, number of axes: 4, table length: 4,300 mm, table width: 2,200 mm, number of spindles: 40, tool diameter: 120 mm, TECHNICAL DETAILS Number of spindles for vertical drilling: 30 Number of spindles for horizontal drilling in X-direction: 6 Number of spindles for horizontal drilling in Y-direction: 4 Total number of vertical + horizontal spindles: 40 Ihsdoyq Ez Tjpfx Ahvjw Number of controlled axes: 4 Maximum tool diameter: 120 mm Table dimensions: 4,300 x 2,200 mm Number of stations in tool magazine 1: 22 Number of stations in tool magazine 2: 8 MACHINE DETAILS Milling motor power: 12 kW Total installed power: 42 kW Control software: BIESSEWORKS EQUIPMENT • Automatic panel loading system • Automatic panel stacking system • Lift table • Conveyor system • Vacuum pump Note: The safety fences at the rear and on the loading table are missing and will only be supplied subject to availability. The machine is sold and delivered as-is, in its actual and legal condition (“as seen and approved”), based on photographic documentation and technical/commercial descriptive materials. The buyer has the right to inspect the machine prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7087

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Ijdpfjyq Avhsx Ahvshw Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: not inspected (used), Year of construction: 2011, functionality: unexamined, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,935 mm, workpiece height (max.): 250 mm, number of axes: 4, number of spindles: 40, TECHNICAL DETAILS Working area X-axis: 6,200 mm Working area Y-axis: 1,935 mm Panel thickness (edge banding unit): 14 - 60 mm Maximum panel thickness: 350 mm Number of vertical drilling spindles: 28 Number of horizontal drilling spindles in X-direction: 4 Number of horizontal drilling spindles in Y-direction: 8 Total number of drilling spindles: 40 Total number of tool changer positions: 22 Number of suction beam traverses: 10 Milling Unit Number of axes: 4 Motor power: 10.5 kW Automatic tool changer Edge banding unit Glue unit Tool magazine Grooving unit Number of places in tool magazine: 22 MACHINE DETAILS Main spindle power: 10.5 kW Total power: 31 kW EQUIPMENT Vacuum pump Safety grid Chip conveyor The machine is sold and delivered in its actual and legal condition ("as seen and approved") on the basis of photographic documentation and technical/commercial documents with descriptive character. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and use of the machine at the destination. Ijdpfx Aheyqzrnevehw External reference: 8011

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 3,200 mm, travel distance Y-axis: 1,300 mm, number of spindles: 21, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 60 m/min, No reserve price – guaranteed sale to the highest bidder! Isdpfxsytr Ryj Ahvehw TECHNICAL DETAILS X-axis travel: 3,200 mm Y-axis travel: 1,300 mm Travel speed X-axis: 80 m/min Travel speed Y-axis: 60 m/min Travel speed Z-axis: 25 m/min Number of suction traverses: 6 Spindles Number of spindles for vertical drilling: 15 Number of spindles for horizontal drilling in X-direction: 4 Number of spindles for horizontal drilling in Y-direction: 2 Total number of spindles: 21 Milling unit Number of axes: 3 Max. spindle speed: 24,000 rpm Motor power: 9 kW Tool changer Number of tool positions: 10 MACHINE DETAILS Total power: 26 kW EQUIPMENT Vacuum pump WINDOWS control system WRT machine programming software Note: Cones and milling cutters are not included in the scope of delivery. Safety fences will be supplied subject to availability (right side missing). The machine is sold and delivered in its actual and legal condition ("as seen and agreed") based on photo documentation and technical/commercial documents for descriptive purposes. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8174

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 Ihodjyvrrqjpfx Ahvew The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: good (used), Code: 0085 Brand: BIESSE ARTECH - ITALY Model: SINGLE - CE Standard Edgebander for straight and shaped panels with glue pot with automatic feed for edges in wood, pvc, abs, veneer, for furniture, kitchens, panels, joinery, custom-made furniture - CE Standard Technical data Panel height from mm 10 to 60 Edge thickness mm 0,4 - 3 Minimum radius mm 25 Feed speed from 4 to 16 mt/min Glue pot capacity approx 3 litres Motorised feed at variable speed mt/min 4/18 End cutting blade unit for cutting excess edge lengths Ihjdpfx Ahswut Tgevow Tilting table Telescopic support roller conveyor for supporting large panels Compressed air 6 bar Total power consumption Kw 5,2 Overall dimensions mm 1700 x 900 x 1500 h Weight kg 350 Top/bottom trimmer Speedy Panel height mm 10/60 Absorbed power Kw 1,5 Compressed air 6 bar Overall dimensions mm 900 x 750 x 1150 h Weight kg 10

Condition: good (used), Code: 0278 Brand: COMIL BIESSE Ijdpfxoyuvb Ee Ahvshw Model: COSMO Self-adjusting clamp press for furniture, furnishings, kitchens, bathroom furniture and various Working length max mm 2500 Working height mm 1200 Working width mm 700 Positioning speed 3,5 mt/min Total power Kw 3,7 Overall dimensions: mm 3760 x 920 x 2280 h Weight kg 2200

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, X working range: 3280 mm Y working range: 1800 mm Z working range: 180 mm 5-axis electrospindle Vertical drilling heads: 13 Horizontal drilling heads X: 6 Horizontal drilling heads Y: 4 Grooving saw in X direction Tool changer with approx. 16 positions on machine side Tool changer with 12 positions at the rear of the machine Work table with 6 beams Software: bSuite3 Vacuum pump: Becker Picchio 2200, 90 m³/h Safety mats Protective fences Iedpsyvtp Djfx Ahvjhw Available: May 2026

Condition: ready for operation (used), Year of construction: 2021, travel distance X-axis: 4,140 mm, travel distance Y-axis: 1,270 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working range of 4140 mm in the X-axis, 1270 mm in the Y-axis, and 275 mm in the Z-axis. The machine is equipped with brushless motors and a PC-based control system for enhanced performance. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE Rover A 1242 machine we have for sale. Contact us for further details. • Working range • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with H=74 mm vacuum modules): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and drives • X & Y: Rack and pinion drive; accuracy class 6 • Z: Ball screw with preloaded nut; accuracy class ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control system and PC hardware • Control: BH660 (PC-based) with WRT (Windows Real Time) technology • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Monitor: 21.5-inch LCD color screen • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and pneumatic • Power supply: 380 / 400 / 415 V – 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Cabinet cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7–10 minutes runtime for data protection • Workpiece support (ATS system) • Workpiece supports: 8 ATS aluminum supports on linear guides Iodpoyt Rrvofx Ahvehw • Module carriers: 24 carriers (132 × 132 × H41.5 mm) with pneumatic clamping • Set-Up Assistant (SA): Manual positioning with LED indicators; ±1.5 mm precision • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and maintenance • Safety system: Bumper system (front and rear) for immediate stop upon collision • Protection: Polycarbonate transparent front plate and sound-absorbing cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (supported/optional): Up to two units, 90/100 m³/h or 250 m³/h each

Condition: ready for operation (used), Year of construction: 2020, overall weight: 3,800 kg, This 3-axis BIESSE Selco WN 2 was manufactured in 2020. It features a robust machine weight of 3900 kg and operates on a power supply of 400 VAC with a consumption of 12 kW. The machine is designed for efficient panel cutting and includes a CE marking for compliance. If you are looking to get high-quality panel saw capabilities, consider the BIESSE Selco WN 2 machine we have for sale. Contact us for further details. • Electrical cabinet weight: 190 kg • Power supply voltage: 400 VAC • Full load current: 24 A • Number of power supply phases: 3 • Power consumption: 12 kW Ihjdpfxjyt Rkls Ahvew • Frequency: 50 Hz • Short circuit rating: 10 kA RMS • Compressed air supply: 6.5–7 bar • Required suction flow speed: 30 m/sec • CE marking: Yes

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, X working area: 4600 mm Y working area: 1535 mm Z working area: 275 mm Ihsdjyvkymspfx Ahvsw 5-axis electrospindle Additional Z-axis support for rear processing units with independent Z-axis Vertical drilling spindles: 29 Horizontal drilling spindles on X-axis: 8 Horizontal drilling spindles on Y-axis: 4 1 grooving saw blade in X direction, diameter 120 mm Chain-type tool changer with 33 positions Pick-up tool changer NC-controlled tool identification system Automatic lubrication system Safety mats XP600 control system, fully PC-based NC-Hops programming system, 1x machine license NC-Hops 7.x Electrical installation, control cabinet, air conditioning Chip conveyor Vacuum system for 1 vacuum pump 250 m³/h

Condition: used, functionality: unexamined, Ferwood Code: AGG0062 – Manufacturer Code: 6314A0111 – Condition: Used – Functionality: Not tested – Compatible Machine: CNC BIESSE ROVER 23/24/27/30/346 – If interested, we offer an overhaul service, please contact us. Weight and dimensions for transport: 2.5 kg, 20x20x20 cm Ihsdovu Auuepfx Ahvjw

Condition: like new (used), Year of construction: 2018, functionality: fully functional, operating hours: 500 h, 1. General Description The Biesse Selco WNT 6 Twin Pusher 2.1 is a high-performance industrial panel sizing machine engineered for precision cutting of wood-based panels, MDF, chipboard, laminated panels, and composite materials. It features a dual pusher system, enabling simultaneous processing of two stacks, which considerably boosts productivity and optimizes cutting cycles. 2. Main Technical Characteristics Cutting System - Maximum cutting length: approx. 6,500 mm - Maximum cutting width: approx. 2,200 mm - Maximum panel thickness: 120 mm - Saw blade projection: 120 mm - Main saw motor power: 18.5–22 kW - Scoring saw motor power: 2.2–3 kW - Automatic blade positioning (electronically controlled) Twin Pusher System - Dual independent pushers (Twin Pusher 2.1) - Simultaneous processing of two panel stacks - High-speed positioning via brushless motors - Precision rack and pinion drive - Up to 30–40% higher productivity compared to single-pusher systems 3. Worktable and Handling - Air flotation tables for effortless panel movement - Heavy-duty steel frame construction - Automatic panel loading and alignment system - Programmable side aligner - Front squaring device for exact positioning 4. Control System Isdeyvh U Ijpfx Ahvshw - Industrial CNC control with user-friendly interface - Integrated optimization software for cutting - Real-time production monitoring - Barcode label printing capability - Network connectivity (Industry 4.0 ready) 5. Cutting Accuracy - Positioning accuracy: ±0.1 mm - Repeatability: ±0.05 mm - Automatic blade wear compensation 6. Safety and Standards - Fully enclosed cutting area - CE-compliant safety systems - Emergency stop system - Safety photocells and protective barriers 7. Production Capacity - Designed for high-volume industrial output - Capable of continuous (3-shift) operation - Ideal for furniture production, panel processing, and custom manufacturing lines 8. Additional Equipment (Typical) - Automatic label printer - Off-cut management system - Waste extraction connection - Optimization software (Biesse proprietary) - Warehouse integration capabilities 9. Advantages - High productivity due to Twin Pusher system - Outstanding cutting precision - Reduced material waste - Quick setup and automatic adjustments - Reliable performance in industrial conditions 10. Applications - Furniture manufacturing - Interior production - Kitchen and wardrobe production - Panel processing industries

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 1000058013, functionality: fully functional, operating hours: 1,225 h, Equipment: CE marking, documentation/manual, ENGLISH SPOKEN NOUS PARLONS FRANCAIS Manufacturer: BIESSE Model: BREMA EKO 2.2 Iedpjyu Nulefx Ahvshw Year of construction: 2022 Condition: very good Category ID: 2502 Type ID: 4257 Type: vertical wood machining center We offer this very good BIESSE BREMA EKO 2.2 vertical wood machining center, year of construction 2022. The machine was sold new in october 2022 together with a Biesse B-solid software for a total price of €120.000 excl. VAT. The machine only has 1225 working hours, it is sold with all the tools seen on the pictures, which make it a bargain ! Please keep in mind we sell the machine in "used" condition. We sell it as a user, therefore no warranty can be offered on the machine. We'll be happy to load it on a truck and even organize the shipment when required. If you have any questions or need more information, feel free to send us a message or give us a call. Notre entreprise de menuiserie vend cette très belle machine Biesse EKO 2.2 qui a peu servi 1225 heures de travail seulement La machine est très bien équipée et sera vendue avec le logiciel B-suite de Biesse, et tout l'outillage qui est présenté sur les photos. C'est une affaire à ne pas rater ! Prix neuf en octobre 2022 : 120.000€ HT La machine est vendue sans garantie car nous ne sommes pas revendeurs de machines-outils, nous sommes une entreprise de menuiserie. Nous pouvons organiser le transport et charger la machine sur un camion.

Condition: excellent (used), Year of construction: 2008, Biesse Artech Levia 310 - 1350. YoM: 2008. Iedpfx Asyuy R Dehvshw UK Price £13,650 + VAT Single belt Finishing sanding machine which has been used for pre-sanding and de-nibbing in the paint shop. Now surplus to requirements due to closure of the paint shop. Can also Calibrate and sand solid woods. Single head / belt construction. Working width 1350mm. Thickness between 3mm & 200mm. Combi Working Unit Grooved steel Calibration Roller. AND Electronic Sectioned Pad. Cleaning brush on outfeed. Vacuum table to increase panel holding. Compressed air belt cleaning. Automatic panel thickness setting. Extended infeed rollers.

Condition: used, Year of construction: 2014, total height: 2,800 mm, total length: 6,900 mm, total width: 2,800 mm, Empty weight: 6.100 kg Price: On request - Details: - └ Description: Needs repair to B-axis and leaks to seals - Year: 2014 - Documentation available: No - CE certificate present: No - Serial number: 10333 - Number of milling spindles [pcs.]: 2 - └ Milling spindle 1: - - Number of controlled axes [pcs.]: 5 - └ Milling spindle 2: - - Number of controlled axes [pcs.]: 3 Ihjdpfx Aeyr Rnujhvew - Type milling table: Beam table - Tool clamping system: HSK-F63 - Material clamp system: Pneumatic - Drilling unit present: Yes - Tool changer positions [pcs.]: 45 - System/software: BiesseWorks - Safety feature: Safety mat, Enclosed fence, Door interlock switches - Vacuum pump present: Yes - └ Number [pcs.]: 2 - └ Brand: Becker - └ Type: Vtlf 2.250 - └ Year of manufacture: 2011 - └ Main motor power [kW]: 5.5 - └ Capacity [m³/h]: 244 - └ Connection diameter [mm]: 60 - └ Vacuum pressure [bar]: 200 - └ Oil free: Yes - Tools included: Yes - CNC documentation available: User keys/licenses, USB stick - Table length [mm]: 4800 - Table width [mm]: 1500 - Voltage [V]: 400 - Current consumption [A]: 39 - Fuse [A]: 63 - Power [kW]: 22.8 - Transport dimensions: 6900mm x 2800mm x 2800mm (l x w x h) - Transport weight [kg]: 6100kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Glenn Smeets

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, CNC machining center X working area: 3855 mm Y working area: 1650 mm Z working area: 245 mm 5-axis electrospindle, 13 kW power, HSK63F interface, liquid-cooled 12-position turret tool changer mounted on carriage Iedpfx Aheyuuw Eevehw 16-position tool changer mounted on X carriage Vertical drilling heads: 20 Horizontal drilling heads X: 4 Horizontal drilling heads Y: 4 Saw blade unit for grooving 8-rail worktable Software: bSolid Heat exchanger for coolant 250 m3/h vacuum pump Safety photocells Chip conveyor Only 3377 hours of program execution with EPS for automatic positioning of rails and suction cups Suction cups and Uniclamps included Available in July

Condition: ready for operation (used), Year of construction: 2010, This Biesse Techno Kernell was manufactured in 2010. A used multi-spindle drilling line with stacking system, it features infeed and automatic stacking units by Wamhoff. Ideal for efficient, high-volume drilling operations, this machine includes multiple drilling supports both from above and below. If you are looking to get high quality drilling capabilities consider the Biesse Techno Kernell machine we have for tact us for more information. Machine Benefits Technical Machine Benefits • Used drilling line with stacking system • Consisting of: infeed unit / throughfeed drilling machine / automatic stacking unit Ihodpfx Ajyap Uvjhvjw • Throughfeed drilling machine / 6 drilling supports from below / 4 drilling supports from above / throughfeed drilling machine / 5 drilling supports from below / 4 drilling supports from above • Note: the technical data and descriptions are taken from the order confirmation at the time. Data is for information purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2022, This BIESSE Selco WNT 630 panel saw was manufactured in 2022. It features a maximum cutting length of 3800 mm, saw blade projection of 108 mm, and a lift table capacity of 5 tons. Ideal for handling large panels up to 3660 x 2200 mm. If you are looking to get high-quality cutting capabilities, consider the BIESSE Selco WNT 630 machine we have for sale. Contact us for more information. • Working size: 3800 x 2200 mm • Max cutting length: 3800 mm • Saw blade projection: 108 mm • Max gripper opening: 100 mm • Min panel size: 1830 x 915 mm Iedpfxeyf I U Se Ahvjhw • Max panel size: 3660 x 2200 mm • Max packet height: 630 mm • Condition: Almost new, used only a few months Additional equipment • Back lift table: • Minimum panel thickness on lift table: 10 mm • Maximum lift: 985 mm • Lift table capacity: 5 t

Condition: ready for operation (used), Year of construction: 2018, This 4-axis BIESSE Rover S FT 1536 was manufactured in 2018. It features a robust gantry design, a working area of 3765 × 1560 mm, and a main spindle power of 13.2 kW. Equipped with a HSK-F63 tool holder system, 12-position disc-type tool changer, and a BIESSE BH 10 drilling unit with comprehensive vertical and horizontal drilling capabilities. It also includes a grid vacuum table, dual 500 m³/h vacuum pumps, and is DXF file compatible. Contact us for more information about this machine. • Weight (kg): 3000 • Main Spindle: 1 spindle, 13.2 kW • Axes: 4 • Working Area (X × Y): 3765 × 1560 mm • Torque Support: 4th axis (C-axis rotation) • Tool Holder System: HSK-F63 • Tool Change Positions: 12 (disc-type changer) • Tool Length Measurement: Yes • Drilling Unit: Vertical Drills: 10, Horizontal Drills: 4 (X direction), 2 (Y direction) • Grooving Saw: In X direction • Vacuum Table: Grid table • Vacuum Pumps: 2 × 500 m³/h Iedpfex D Iqvex Ahvjhw • Extraction System: Sweeping arm discharge device • Lubrication: Automatic • Air Blowing Device: Yes • Control System: Interface with DXF file compatibility • CE Marked: Yes • Tools, tool holders, aggregates, and mechanical clamps shown in photos or videos are not included in the scope of delivery.

Condition: ready for operation (used), Year of construction: 2007, travel distance X-axis: 4,600 mm, travel distance Y-axis: 1,935 mm, travel distance Z-axis: 275 mm, number of axes: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine includes a vacuum system, a conveyor belt for chip removal, and a liquid cooling unit. If you are looking to get high-quality CNC machining capabilities, consider the Biesse Rover C9.50 machine we have for sale. Contact us for more information. Worktable and clamping • 8 ATS plate holders (L = 1525 mm) and 24 slide rails • Automatic positioning of plate holders and slide rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right), with pneumatic system • 4 removable center stops, stroke 140 mm (2 left + 2 right), with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules)Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for standard vacuum systemMachining units and configuration • Composition C3-A1: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a work unit with 5 interpolating axes (units usable only when the electric spindle is vertical) • Composition C3-P2: • Additional Z slide for rear work units, controlled by an independent Z axis • BH 42 L drilling head • Chain tool changer with 22 positions (180 mm center distance) Iedpfx Aex D H Hcohvohw • Iron gripper for chip deflector with pneumatic or inductive sensor, positioned in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle)Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional equipment • Conveyor belt for removing chips and scrap pieces (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles, or one electric spindle plus one liquid-cooled drilling head)Note: The technical data and descriptions are taken from the original order confirmation and are for information only; they are not binding.

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 2,400 mm, travel distance Y-axis: 1,200 mm, number of axes: 3, overall weight: 1,700 kg, spindle speed (max.): 24,000 rpm, This 3-axis BIESSE ROVER J FT 1224 was manufactured in 2017, featuring a working area of 2400 mm by 1200 mm. It includes a CNC electrospindle with a maximum speed of 24,000 rpm, and a flat vacuum table ideal for routing, drilling, and panel machining. Consider the opportunity to buy this BIESSE ROVER J FT 1224 CNC Wood Machining Centre. Contact us for more information about this machine. Ijdpoyfnp Ajfx Ahvshw • Axes: 3 CNC-controlled (X, Y, Z) • Capabilities: routing, drilling, pocketing, panel machining • Air supply: 7.5 bar • Suction air speed: 30 m/s Additional equipment • Flat vacuum table with suction cups

Condition: ready for operation (used), Year of construction: 2010, number of axes: 5, This 5-axis BIESSE ROVER C9.5 was manufactured in 2010. It features a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), 25 vertical and 6 horizontal spindles, and a 5-axis electric spindle (11 kW HSK F63). It boasts high travel speeds (X/Y: 100 m/min, Z: 30 m/min) and a total installed power of 35.7 kW. If you are looking to get high-quality woodworking capabilities, consider the BIESSE ROVER C9.5 machine we have for sale. Contact us for more information. • Working Area: X=4600 mm, Y=1935 mm, Z=275 mm • Travel Speed: X-axis: 100 m/min, Y-axis: 100 m/min, Z-axis: 30 m/min • Vertical Spindles: 25 • Horizontal Spindles: 6 • Tool Changer: Revolver type with 8 positions, Chain changer • 5-axis Electric Spindle: 11 kW HSK F63 Ihodox Tka Uepfx Ahvsw • Installed Power: 35.7 kW

Year of construction: 2020, condition: ready for operation (used), Main Drive Spindle motor power 13.2 kW Spindle Speed 24000 RPM Number of axis 3 Movement Iedpfx Aox Nr Npjhvshw X-Axis Movement 3765 mm Z-Axis Movement 378 mm Y-Axis Movement 1560 mm This 5-axis BIESSE Rover PLAST A FT 1536 was manufactured in 2020, featuring a robust electro-welded base and high-precision movement systems. It boasts a main electrospindle power of 13.2 kW, a programmable rotation speed up to 24,000 RPM, and an 8-position revolver tool magazine. Ideal for intricate woodworking, it includes a 21.5" LCD monitor and Industry 4.0 integration. Consider the opportunity to buy this BIESSE Rover PLAST A FT 1536 CNC Wood Machining Centre. Contact us for more information. Application Types CNC Wood Machining

Condition: used, functionality: unexamined, Ferwood Code: RU0009466 - Manufacturer Code: 03314K00 - Condition: Used - Functionality: Not tested - Compatible machine: - Weight: 15 kg - Dimensions: 70x46x34 cm - If interested, we offer a refurbishment service—please contact us. Ijdpoyrqxtsfx Ahvjhw