Used Homag Table for sale (482)

Condition: used, Year of construction: 2013, HOMAG edge banding line with infeed and outfeed. The machine consists of the following components: Machine configuration: HOMAG edge banding line with infeed and outfeed Infeed table: HOMAG PROFI TBL100/20/25/F FlexLine Edge banding machine: HOMAG PROFI KAL330/7/A3/WZ Panel outfeed: HOMAG ZHR 30/L/125/F TECHNICAL DETAILS Panel length min.: 240 mm Panel length max.: 3,000 mm Panel width min.: 120 mm Panel width max.: 1,200 mm Panel thickness min.: 12 mm Panel thickness max.: 60 mm Edge thickness min.: 0.3 mm Edge thickness max.: 3 mm Gluing system: EVA hot melt Number of processing units: 9 pcs. Number of units in the joining section: 1 pc. Number of units in the edge processing section: 7 pcs. Feed speed max.: 25 m/min Trimming unit Manufacturer / Model: S2 Motor power: 3 kW Speed: 9,000 rpm Automatic cycle adjustment: Yes End trimming unit Manufacturer / Model: HL 84 Number of motors: 2 pcs. Motor power: 0.4 kW Speed: 12,000 rpm Working speed max.: 25 m/min Flush trimming unit, top and bottom Manufacturer / Model: BF10 Number of motors: 2 pcs. Motor power: 0.55 kW Speed: 12,000 rpm Corner rounding unit Manufacturer / Model: FK 11 Number of motors: 2 pcs. Working speed max.: 25 m/min Profiling unit Number of motors: 1 pc. CNC positioning: Yes Automatic cycle adjustment: Yes Edge pulling unit Manufacturer / Model: PN20 Glue application unit Manufacturer / Model: FA 11 Scraping unit Gsdpfx Aksz En Axjyskc Manufacturer / Model: FA 11 Number of motors: 2 pcs. Feed speed, infeed max.: 40 m/min Feed speed, outfeed max.: 25 m/min EQUIPMENT FlexLine infeed table Pressure bar with rubber belt Panel stop Overpressure Edge heating lamps Edge magazine with 24 positions Hot melt glue tank Hot melt pre-melter Edge pressing roller unit with 3 pressure rollers CNC positioning of the pressure rollers Spraying device PowerTouch PC23 machine programming software Panel outfeed via transfer roller conveyor Panel transport via motorized conveyor belt Clamping feed system Panel outfeed system, left CE conformity The machine is sold and delivered in its actual and legal condition (“as is, where is”) based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing and use of the machine at the destination. External Reference: 7694

Condition: used, Year of construction: 2016, machine/vehicle number: 0-261-04-6588 si 0-284-96-1130, functionality: fully functional, power: 21 kW (28.55 HP), input voltage: 380 V, input current: 30 A, input frequency: 50 Hz, type of input current: AC, edge thickness (max.): 3 mm, height adjustment type: electric, actuation type: electric, total height: 1,600 mm, total length: 12,000 mm, total width: 3,000 mm, overall weight: 10,000 kg, year of last overhaul: 2025, Equipment: documentation/manual, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Maxim speed:18m/min General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Loc A U Uov Szt Dslccsai Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Groups existent on the machine 1)Emulsion spray at the inlet and outlet Edge preheating 2)Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment 3)Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Gsdjz E A T Ejpfx Akyjkc Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min 4)Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide 5)Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment 6)Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movem 7)Cleaning and polishing unit 8)Automatic return conveyor- Homag TFU 140

Condition: used, Year of construction: 2003, machine/vehicle number: 0-34-07-5949, functionality: fully functional, input voltage: 24 V, input current: 48 A, input frequency: 50 Hz, cutting height (max.): 320 mm, cutting width (max.): 60 mm, We offer this used HOMAG Optimat chf 41 circular table saw, year of construction 2002. Manufacturer: HOMAG Model: Optimat chf 41 Gjdpfx Aezq Hwhokyekc Construction year: 2002 year Condition: used Category ID: 2094 Type ID: 1612 Machine type: circular table saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2008, workpiece height (max.): 40 mm, controller model: PowerControl P85, working width: 1,550 mm, working length: 4,175 mm, TECHNICAL DETAILS Working area, X-axis: 4,175 mm Working area, Y-axis: 1,550 mm Maximum workpiece thickness: 40 mm Number of working areas: 2 Traverse speed, X-axis: 80 m/min Traverse speed, Y-axis: 80 m/min Traverse speed, Z-axis: 30 m/min Table system: Beam table with vacuum cups Number of vacuum cup beams: 8 Positioning: CNC-controlled Drilling unit Position: Top Vertical drilling spindles: 20 Horizontal drilling spindles in X-direction: 10 Milling unit Position: Top Gkodpfxoz Ekfvs Akysc Controlled axes: 4 + Flex5 Motor power: 15 kW Cooling: Liquid cooling Tool changer: Automatic Sawing unit Position: Top Tool magazine: 2 slots Tool magazine 1: 18 slots Position of tool magazine 1: Rear of the machine Tool magazine 2: 10 slots Position of tool magazine 2: On the machining head MACHINE DETAILS Control system: PowerControl P85 Machine programming software: WoodWOP 5.0 EQUIPMENT Beam table with vacuum cups 8 vacuum cup beams Vacuum pump Automatic tool changer Liquid cooling PowerControl P85 control system WoodWOP 5.0 machine programming software Note: Tools not included The machine will be sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 7350

Condition: used, Year of construction: 2010, controller model: PC85, working width: 1,750 mm, milling spindle speed (max.): 24,000 rpm, working length: 6,000 mm, TECHNICAL DETAILS Machining method: Drilling and milling Number of work areas: 2 Work area X-axis: 6,000 mm Work area Y-axis: 1,750 mm Number of controlled axes: 5 Travel speed X-axis: 80 m/min Travel speed Y-axis: 80 m/min Travel speed Z-axis: 30 m/min Table system: Console work table with vacuum cups Number of vacuum consoles: 10 CNC positioning: Yes Vacuum cups for workpiece clamping: Yes Number of vacuum cups: 40 Drilling unit Number of drilling units: 1 Position of drilling unit: Top Vertical drilling spindles: 20 Horizontal drilling spindles, X-direction: 5 Horizontal drilling spindles, Y-direction: 5 Total drilling spindles: 30 Milling unit Number of milling units: 1 Position of milling unit: Top Controlled axes: 5 Motor power: 12 kW Speed: 24,000 rpm Liquid cooling: Yes Automatic tool changer: Yes Number of tool magazines: 1 Tool positions: 72 MACHINE DETAILS Control: PC85 Programming software: WoodWOP 5.0 Vacuum pumps: 2 Individual output per vacuum pump: 250 m³/h Gkjdpfx Aoz Ekb Dekyec Total connected power: 49 kW EQUIPMENT Console work table with vacuum cups 10 vacuum consoles with CNC positioning 40 vacuum cups for workpiece clamping 2 vacuum pumps Top drilling unit with 30 drilling spindles Top 5-axis milling unit with 12 kW electric motor spindle Liquid cooling Automatic tool changer Tool magazine with 72 tool positions PC85 control WoodWOP 5.0 programming software Automatic chip extraction Safety mats on the front of the machine Safety sensors Fixed safety guards CE conformity The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8167

Condition: used, Year of construction: 2013, Used machine Year of manufacture: 2013 5-axis CNC machining center as a cantilever table design Gsdpjz Rrbwjfx Akyokc Working area in X = 4375 mm Working area in Y = 1550 mm Working area in Z = 250 mm with 12 kW milling spindle, liquid-cooled 5-axis spindle Homag Drive 5 C+ max. speed 24,000 rpm with torque support Tool holder HSK F-63 18-position disc tool changer 17 drilling spindles, vertical 2 drilling spindles, horizontal in X 2 drilling spindles, horizontal in Y Notch saw, 90° swiveling with LED light strip as positioning aid with 2 vacuum pumps, each 300 m³/h with special workpiece clamping system for small parts with barcode scanner Safety device: bumper with chip conveyor with powerControl PC 85 control system with handheld operating device Software: Homag Woodwop 8.0 WoodScan CollisionControl Space requirement: approx. L x W x H 7650 x 4710 x 2850 mm Availability: approx. July 2027 Location: NRW (North Rhine-Westphalia)

Condition: excellent (used), Year of construction: 2018, used horizontal panel dividing saw Manufacturer: Homag Type: Sawteq B-130 (Optimat HPP130/32/32) Year of manufacture: 2018 Cutting length 3200 mm Cutting width (program slider travel) 3100 mm Roller rail 1 * element, 10-track + 4 single-track Clamps 5 pieces Air cushion table 3 * 1800 x 500 Gkedpfx Aoz R Sgzskyjc Central blower 1 piece Technical data: Saw blade overhang 60 mm Saw carriage feed: forward 1-60 m/min, reverse constant 60 m/min Automatic cutting height; pressure beam height control Angular backstop, min. pressure width 0 mm; max. pressure width entire cutting length Main saw motor 5.5 kW with pneumatic saw lift Scoring saw motor 1.1 kW, motorized saw lift, electric adjustment Operating voltage 400 V (+10%/-5%) / 50 Hz Electrical connection value: 10 kW Labeling program with label printer PICA II 103 Power Control CADmatic 4 control system Optimization program CAD-Plan 4 "Single Saw" on the machine

Condition: excellent (used), Year of construction: 2018, machine/vehicle number: 0-250-04-4777, functionality: fully functional, operating hours: 272 h, input voltage: 400 V, input current: 31 A, input frequency: 50 Hz, type of input current: three-phase, travel distance X-axis: 4,030 mm, travel distance Y-axis: 1,950 mm, workpiece length (max.): 3,100 mm, workpiece width (max.): 1,250 mm, workpiece height (max.): 160 mm, number of axes: 3, number of slots in tool magazine: 14, total height: 2,400 mm, total length: 6,850 mm, total width: 3,616 mm, overall weight: 3,250 kg, table length: 3,100 mm, table width: 1,250 mm, Equipment: documentation/manual, For sale is a 2018 HOMAG CENTATEQ P-110 3-axis CNC machining center, complete with all accessories shown in the pictures, clamping chucks, tools, replacement drive components, and an Extract DUO two-bag dust extraction unit. The machine has seen limited operating hours and has undergone annual brand-name servicing. The machine can be inspected while in operation. The selling price includes professional disassembly and crane loading onto a truck. The organization and costs of transport are the responsibility of the buyer. Primary usage: 272 h Secondary usage: 193 h Total usage: 22891 h Work table: X = 3100 mm, Front stop Y = 1250 mm, Rear stop Y = 1550 mm, Z = 160 mm Main spindle power: 10 kW Travel speed: X/Y = 60 m/min X = 35 m/min Y = 50 m/min Z = 15 m/min Bumper – safety system EN1760-3 14 tool storage spaces on the moving part, and an additional 8 on the fixed part. Gkjdpfjz E Rinsx Akyjc Extract Duo dust extraction unit technical specifications: Fan power kW: 5.5 Filter area m2: 36 Filter bag diameter mm: 800 Number of dust bags: 2 Delivered air volume m3/h: 6000

Condition: used, Year of construction: 2005, functionality: fully functional, Equipment: CE marking, HOMAG OPTIMAT BAZ211 VENTURE 20 (Router No. 5) Year of manufacture: 2005 Basic structure and drives • Machine bed: Heavy-duty, stable design with compact linear guides. • X and Y axis drives: Digital AC servo motors and rack and pinion gears with pre-tensioning for backlash-free operation. • Z axis drive: Digital AC servo motor with ball screw; travel range is 535 mm. • Lubrication: Manual central lubrication for all drives and linear guides. Main spindle and C axis • Power: 11 kW in S6 mode (7.5 kW in S1). • Cooling: Liquid-cooled, vector-controlled asynchronous motor. • Speed range: Continuously programmable from 0 to 18,000 rpm. • Tool holder: HSK F63 according to DIN 69893. • C axis: Equipped with an aggregate interface, pneumatic interface, and 3-point support. Gkedezr N H Uepfx Akyoc Clamping system (Cantilever table) • Cantilevers: 6 pieces with a tubeless, dual-circuit vacuum system. • Stops: 6 longitudinal stops in the cantilevers (stroke 140 mm) and 2 adjustable lateral stops. • Suction cup equipment: • 10x dual-action vacuum suction cups (160x115x100 mm), 4 with integrated lift. • 2x dual-action vacuum suction cups (125x75 mm). • Pneumatics: 4 connections with a single-circuit system for mechanical clamps. Workpiece dimensions • Length (X): Max. 3050 mm (individual setup) or 900 mm (shuttle mode). • Width (Y): Max. 1220 mm for milling; max. 1150 mm for all aggregates. • Thickness (Z): Max. 60 mm with standard suction cups; up to 300 mm including fixtures for top-side milling. • Minimum thickness: 12 mm for chamfering, 16 mm for radius milling. Tool changer and accessories • Type: Disc-type tool changer (12 positions) for HSK F63 tools and aggregates. • Diameter capacity: 12x max. 135 mm, or a combination of 6x 180 mm and 6x 85 mm. • Vacuum system: Liquid ring pump with a capacity of 66 m³/h (equivalent to 100 m³/h for vane pumps). Control system (Power Control PC85) • Hardware: Industrial PC (2 GHz) with 512 MB RAM, a hard drive for data and a second for backup (cloning). • Software: • woodWOP: Graphical interface for CNC programming. • woodDesign: 3D interface for furniture design. • woodScout (optional): Graphical diagnostic system. • Communication: Ethernet card and modem for remote diagnostics.

Condition: used, Year of construction: 2001, functionality: fully functional, Equipment: CE marking, HOMAG Optimat BOF 31/40/K Manufacturer: HOMAG Group (Germany) Type of machine: CNC machining center with a cantilever table Year of manufacture: 2001 Design: Stable gantry design (movement in the X-axis is provided by the gantry) Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm (working area for one large part or shuttle operation) • Y-axis (width): 1,200 mm (tool reach during milling) • Z-axis (stroke): 400 mm (max. workpiece passage including clamps approx. 100 mm) Working table (Version K – Cantilever) • Number of cantilevers: 8 sliding beams (cantilevers). • Clamping elements: Two-circuit vacuum system. Suction cups can be freely positioned on the cantilevers. • Positioning aids: Pneumatically controlled stops (rear and front row) for easy and precise positioning of parts. Aggregates and equipment Gkjdpfozr N E Dox Akyjc • Main spindle: Power 11 kW, HSK F63 clamping, liquid-cooled. • Tool changer: 12-position disc tool changer, which moves together with the gantry in the X-axis. Control and Software • Control system: HOMAG PC85 (industrial PC based on Windows). • Programming: woodWOP 5.0 / 6.0 (graphical interface for creating macros and drilling patterns). • Vacuum pump: Typically Busch with a capacity of 100 m³/h (standard for cantilever machines).

Condition: used, Year of construction: 2000, functionality: fully functional, HOMAG Optimat BOF 31/40/G Manufacturer: HOMAG Group (Germany) Machine type: CNC machining center (stationary machine) Year of manufacture: 2000 Design: Gantry design for maximum stability Working ranges (X, Y, Z axes) • X-axis (length): 4,000 mm • Y-axis (width): 1,200 mm • Z-axis (travel): approx. 400 mm (workpiece passage approx. 60–100 mm depending on clamping) Equipment and units • Main spindle: Liquid-cooled electrospindle (power 11 kW) • Tool clamping: HSK F63 • Tool changer: Disc tool changer with 12 positions, located on the gantry for quick tool changes. Clamping system • Table type: Full table • Vacuum pump: 2 pcs - Siemens Elmo water-type 2BL1 with a capacity of up to 60 m³/h Control and Software Gkedpfx Ajzr Nurskysc • Control system: HOMAG PC85 (based on Windows) • Software: woodWOP (one of the most widespread and intuitive systems for CNC machining)

Condition: good (used), Year of construction: 2017, functionality: fully functional, input voltage: 400 V, input current: 41 A, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 25 m/min, total length: 12,000 mm, total width: 3,000 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, We offer this used HOMAG KAL370 AMBITION 2474 edgebander with material handling system, year of construction 2017. Type: KAL370 AMBITION 2474 Machine number: 0-200-04-6745 Year of manufacture: 2017 year Technical data and configuration: - edgebanded meters: 1 143 000 m - sizes: the edgebander is 8,4x1,2 m, together 12x3 m - touch screen monitor with Power Touch control, Dell PC Godpfx Aoz E S E Rjkyjkc - USV unit - infeed speed: 16-25 m/min, with corner rounding unit maximum 20 m/min - automatic thickness adjustment between 8-60 mm - top pressure system with rubber belt (the belt changed in the beginning of 2025.) - separating/lubricating spray units: at front side, at the pressure rollers, before sawing unit, before glue scraper unit - additional infeed table for narrow workpiece infeed - premilling unit, manually adjustable - workpiece preheating unit (completely renovated in 2026.) - QA65 glue pot with manually adjustable glue gates - the machine is used now with EVA hotmelt glue - Robatech glue premelting unit for PUR glue - automatically adjustable edge pressure zone, edge thickness: 0-3 mm - edge magazine with one edge capacity, edge infeed with servo drive motor - edge material height adjustment manually - PK25 snipping saws with 3 functions - rough trimming unit - FK11 trimming/ corner rounding unit with R2 diamond tool and automatic adjustment - MN 21multi profile scraping unit with automatic adjustment (fase-R1-R1,5-R2- R2,5-R3) - glue scraping unit FA20 with automatic adjustment - buffing unit - remote control for setup mode - the machine is for sell together with Homag TFU material handling system - liftable air cushion table for TFU at the infeed area - front side Interroll band motor has changed for TFU in the beginning of 2026. - Including: full documentation and CE certificate, HDD for PC1:1 data save, suction pipes above the machine, tools for tool change The machine is in good condition, regularly maintained and it is still in production. Available immediately. If you have any questions or need more information, feel free to send us a message or give us a call: +36202546770

Condition: excellent (used), Year of construction: 2021, operating hours: 140 h, functionality: fully functional, feed length X-axis: 3,050 mm, feed length Y-axis: 1,250 mm, feed length Z-axis: 80 mm, input frequency: 50 Hz, input current: 29 A, working width: 3,050 mm, We offer this very good HOMAG DRILLTEQ V-500 throughfeed drilling machine, year of construction 2021. Working dimension X 3.050 mm Working dimension Y 1.250 mm Working dimension Z 80 mm Number of milling spindles 1 Main motor power 10 kW Rotation speed max 24.000 rpm Tool clamping system HSK-F63 Tool changer positions 4 Vertical drilling spindles 15 Horizontal drilling spindles in X 6 Horizontal drilling spindles in Y 4 Groove saw 90° turnable Vertical working surface Machine table Feed-through technology Special workpiece clamping system clamp gripper Barcode reader Safety device enclosed cabin Control Homag powerTouch, HOMAG POWER CONTROL Software HOMAG WOODWOP 7.2 Conformity marking CE mark Category: Machining centre Type designation: DRILLTEQ V-500 Subtype: OPTIMAT BHX200 Gsdpsylp Slefx Akyekc Machine number: 0-250-73-7195 Wiring diagram: 0-250-73-7195 Supply voltage: 400Y/230 V Neutral conductor: yes Phases: 3 Frequency: 50 Hz Maximum operating full load current: 29 A Fuse rating: 35 A Control voltage: 24 V If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2007, edge thickness (max.): 3 mm, feed rate X-axis: 25 m/min, controller model: PC22, TECHNICAL DETAILS The machine has the following configuration: Minimum edge thickness: 0.3 mm Maximum edge thickness: 3 mm Maximum feed rate: 25 m/min Pressure bar: with rubber belt Panel stop: with CNC positioning Panel infeed alignment system: available Edge application unit Processing interval: automatically time-controlled Motor power: 3 kW Gedpfez Ekbkjx Akyskc Speed: 9,000 rpm Edge processing Edge heating lamps: available Roller magazine: available Hot melt adhesive reservoir: available Hot melt adhesive pre-melter: available Number of pressure rollers: 7 Positioning: CNC-controlled Trimming unit Number of motors: 2 Motor power: 0.8 kW Speed: 12,000 rpm Flush trimming unit, top and bottom Number of motors: 2 Motor power: 1.5 kW Speed: 12,000 rpm Edge rounding unit Manufacturer/Model: FF12 Number of motors: 4 Motor power: 0.4 kW Speed: 12,000 rpm Profile trimming unit Number of motors: 1 Processing interval: automatically time-controlled Motor power: 5 kW Speed: 11,600 rpm Scraping blade unit Manufacturer/Model: PN10 Glue scraping blade unit Brushing unit Number of motors: 2 Spray device: available MACHINE DETAILS Number of processing units in edge processing: 7 Control system: PC22 EQUIPMENT Pressure bar with rubber belt Panel stop with CNC positioning Panel infeed alignment system Edge heating lamps Roller magazine Hot melt adhesive reservoir Hot melt adhesive pre-melter 7 pressure rollers Trimming unit Flush trimming unit, top and bottom Edge rounding unit FF12 Profile trimming unit Scraping blade unit PN10 Glue scraping blade unit Brushing unit with spray device PC22 control The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External Reference: 6042

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: Gkjdpfjzqggvjx Akyoc All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 2015, - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm CNC nesting machine Godpfx Aszux Tcokyjkc Manufacturer: Homag Type: BMG511/60/12/R Year of manufacture: 2015 Technical data - X-axis 80 m/min - 18-position tool changer - Drilling head with 30 spindles - 6,000 x 1,550 mm Workpiece parameters: Length with single workpiece loading: 6,000 mm / with pendulum machining 1,550 - 3,200 mm Widths: Max. 1,550 mm with stop at the rear and milling diameter 25 mm Workpiece thickness 275 mm including clamping device Up to max. 60 mm with standard clamping device Speed Pack: Increase in the max. travel speed of the X-axis to 80 m/min. With tool transfer station, on the left side of the machine bed Rotary tool changer, 18 positions Option for 18 x 130 mm tool diameter or 9 x 180 + 9 x 70 mm. Aggregate length max. 320 mm Machining spindle 12 kW (12 kW in S6 operation, 9.5 kW in S1 operation) Frequency-controlled rotation 0 - 24,000 rpm. C-axis with aggregate interface Drive for all aggregates with pivoting axis, pivoting range without limitation. Interface for FLEX-5 aggregate Drilling head, 30 spindles: V20 / H10 / S360 MPU Multi-Processing Unit with C-axis +/- 185 for drilling and sawing operations at any angle. 20 vertical spindles in HIGH SPEED. Each drilling spindle with a quick-change system. Arrangement of spindles in a U-shape: 3 drilling rows with 11, 3 and 6 spindles, spindle spacing 32 mm 10 horizontal drilling spindles. 4 drilling spindle pairs with a spacing of 32 mm 1 drilling spindle pair spacing 320 mm Grooving and cut-off saw for max. saw blade diameter 200 mm. Basic design, slatted table: Slatted table with grooved aluminum profile Dynamic workpiece positioning on R-table The machine automatically checks the maximum possible part dimension based on the program layout. The vacuum areas are permanently assigned to the machining areas. Machine control POWERCONTROL PC 86 POWERTOUCH with 21.5 Full-HD multi-touch display WoodWop for graphical, dialog-oriented creation of CNC programs. The machine is supplied via an on-site vacuum system. Without its own vacuum pump.

Condition: used, Year of construction: 2012, No. 3274 CNC machining center HOMAG PROFI BAZ 222/40/F/K Used, year of construction 2012 Working range X max. 4000 mm Working range Y max. 1550 mm Workpiece thickness max. 300 mm (incl. clamping devices) 5-axis main spindle HOMAG DRIVE5+ Spindle power 15 kW (S6) / 12 kW (S1) Spindle speed 1000 - 24000 rpm Tool clamping system HSK-F63 18-position rotary tool changer Pickup station for saw blade Ø 350 mm Drilling head with 21 spindles 17 vertical drilling spindles 2 horizontal drilling spindles in X-direction 2 horizontal drilling spindles in Y-direction Gsdpey S Edxefx Akyekc Grooving saw swivelling 0° / 90° Edge banding unit HOMAG POWER EDGE 360° edge banding Pre-cutting station 2-position edge roll magazine 2 independent Y-axes for main spindle and edge banding unit Console table with 8 consoles Vacuum clamping devices 2 vacuum pumps, total capacity 2x 100/140 m3/h Control HOMAG powerControl PC85 Programming system woodWOP 6.0 (according to original order configuration) woodWOP Premium package incl. 4 single-user licenses / woodWOP Wizard / woodWOP technology database / woodWOP CAD/CAM Standard interface / DXF interface / woodMotion machining simulation / woodScout diagnostic system / collisionControl collision monitoring / Schuler MDE Basic machine data acquisition Sale on behalf of customer, ex location near 71063 Sindelfingen, without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Gkedoz A Tx Tjpfx Akyjc Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: good (used), Year of construction: 2004, machine/vehicle number: 0-201-24-7426, functionality: fully functional, power: 12 kW (16.32 HP), travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 410 mm, number of axes: 5, number of slots in tool magazine: 18, controller manufacturer: Homag PC85, actuation type: electric, total length: 6,500 mm, total width: 2,500 mm, overall weight: 6,000 kg, Equipment: CE marking, documentation/manual, CNC Homag machine primarily for stair construction. Working area: 6000 x 1200 x 410 mm. Gsdsz H Rp Dspfx Akyekc 5-axis machine. Tool changer with 18 tools. Number of clamping consoles: 10 pieces. Two vacuum pumps.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, - 5-axis spindle DRIVE 5C Profi, 12 kW - Work area: 4000 x 1300 mm (X, Y) - Tool changer: 30-position - Drilling units: 12x vertical, 2+4 horizontal - Projection laser SL LASER Pro Director 6 Gkodpfx Aszz N Uqokyoc - Slotted table/magnetic table

Condition: excellent (used), Year of construction: 2006, USED HOMAG HPP250R/44/44 PANEL SAW TECHNICAL CHARACTERISTICS. Gksdpfoixz A Eox Akyjc Specifications: Cutting width of (4,400 mm) maximum cutting height (72 mm) of the main saw; 10 HP (7.5 kW) and 3 HP (2.2 kW) scoring motor, 4400 RPM main blade and 5100 RPM scoring blade. saw cart working speed of (80 M/min), return speed of (80 M/min), driven by AC electronically controlled inverter drive; Quick blade release "Power-Lock" system. automatic cut length controlled by optical sensor that detects the blade through the cut Pliers pusher: (7) material grippers, (0-60M/min) forward speed and (0-60M/min) return speed, AC inverter driven, center mounted rack and pinion servo motor; Friction-free contact measurement system, magnetic measurement system. Control and machine operator: Controller software PC with: Homag "CAD MATIC " Operating system + "Windows"; full "REAL TIME" user friendly operating menu; 15" full-color graphics monitor, standard optical mouse and keyboard for data entry; basic on-board "Easy Cut Optimizer" organizes up to (15) pieces of (3) different materials, data loading from a PC from the office is possible, the possibility to link third party optimization software. With complete : (4) air float tables (600 x 1,800 mm), tables are individually selectable with a common 5 HP (4 kW) blower motor HOMAG MODEL HPP250 R 44/44 USEFUL CUT 4,400 X 4,400 MM USEFUL CUTTING HEIGHT 72 MM Nº4 FRONT AIR TABLES Nº 7 PNEUMATIC PLIERS TO FIX BOARDS LOWER PNEUMATIC SIDE LAYER SILENT DRIVE CARRIAGE SYSTEM ACTUATED BY RACK AND PINION ELECTRICAL PANEL WITH AIR CONDITIONING OPTIMIZATION SYSTEM WITH LABELING MACHINE

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Gsdpezznh Nofx Akyskc Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: used, Year of construction: 2011, CNC machining center Manufacturer: Homag Type: BMG311 Venture 316L Year of manufacture: 2011 Technical data - Design: 5-axis CNC machining center Gjdpfx Asz E Hpdskyekc - X-axis travel: 4,200 mm / 4,375 mm (with hole diameter 25 mm) - Y-axis travel: 1,400 / 1,550 mm (limitation in drilling operations) - Z-axis travel: 250 mm - Workpiece thickness: up to approx. 250 mm - Cantilever table: 8 cantilevers, LED positioning aid - Vacuum: 2 vacuum pumps, 100/140 m3/h and 90/108 m3/h - Main spindle: 5-axis, 10 kW Drive5C - Speed: 1,500 - 24,000 rpm - Tool holder: HSK 63 - Tool changer: 18 positions - Drilling head: 21 spindles, V17/H4/S0/90, 2.2 kW - Control system: powerControl PC85 - Software: WoodWOP 6.1 - Monitor: 17" TFT - Operating system: Windows XP Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, - Year of manufacture: 2003, commissioning: 2004 - Working dimensions: 4000x1600x200mm Gsdjza Uryepfx Akyekc - Main spindle: 7.5kW - C-axis - Gluing unit - Drills: 12x vertical - LED display of the vacuum pump position - Tool magazine: 12 slots

Condition: excellent (used), HOMAG BOF 211 – CNC Machining Center with 4-Axis Technology Reliable CNC machining center with extensive features and in notably excellent condition. — Technical Specifications • Machine type: CNC machining center • Axes: 4-axis technology (including C-axis) • Traversing paths X/Y/Z: approx. 6,000 × 1,400 × 150 mm • Control: HOMAG powerControl • Vertical main spindle: HKS • Tool changer: for multiple tools • Drilling heads: for vertical and horizontal operations • Aggregate interface: milling, drilling, grooving, sawing, etc. • Vacuum clamping system: matrix nesting or console table • Optional: edge banding and labeling — Features • Dimensional accuracy and repeat precision • Robust construction, well-maintained condition • Software support via HOMAG powerTouch / woodWOP • Suitable for furniture and interior fittings — The machine is available immediately. Dismantling and transport can be arranged by our service team upon request. — Contact Maschinenhandel Nord Gerstenstraße 2 17034 Neubrandenburg 📞 All prices net plus VAT. Subject to change and errors excepted. Gjdpfx Aksxk Tumeyokc