Used Horizontal machining centers with shuttle table (wood) for sale (223)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, - 5-axis spindle DRIVE 5C+ 15kW - Working area: 4200x1550mm - Tool magazine: 14 positions Nodpjw Dv Hzefx Ag Ielh - Drills: 9x vertical, 2+2 horizontal - Chip conveyor - WoodWOP 6.1

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge Njdpfx Ageugpwno Ijlh * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, Year of construction: 2008, PC based Numerical Control with XILOG PLUS software Mobile pine cone with command functions Working range on the X axis is 4400 mm Working range in Y axis 1360 mm Working range in Z axis mm. 180 Z axis travel 200 mm N° 2 work camps in X No. 8 manually adjustable panel support bars with positioning LEDs N° 3 suction cups for holding the panel for each bar N° 4 pneumatic Bakelite bars for lifting the panel (helping with loading and unloading) N° 1 Vertical electrospindle with Vector axis with automatic tool change, HSK 63 connection cones Automatic tool changer with 12 positions on the operating head Drilling head composed as follows: No. 8 vertical X-axis spindles N° 5 Y-axis vertical spindles N° 4 horizontal spindles in X axis N° 2 horizontal spindles in Y axis Safety system with bumper system on the operating head Nedpfx Agspvai Do Islh N° 1 vacuum pump 100 m3\h Automatic lubrication

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. Nledpfexr Dcwex Ag Ieh This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: good (used), BACCI DOUBLE JET The BACCI DOUBLE JET machine with a KUKA robot is an advanced, automated CNC machining center dedicated to the production of wood and wood-based components. The KUKA robot works with the machine's integrated feeder to automatically feed material for processing, significantly increasing efficiency and minimizing the need for manual operation. After the milling and grinding process is complete, the robot automatically retrieves finished parts and places them on pallets, streamlining production logistics and enabling continuous operation without interruptions for manual reloading. Nedpfxoxr Ddue Ag Ielh This system ensures seamless integration of the robot with the BACCI DOUBLE JET machine, which features dual machining heads and 12 interpolated axes, enabling simultaneous and precise machining of components. Automated material loading and unloading and the integrated feeder system increase efficiency and production repeatability while reducing labor costs and improving operator safety. This machine is primarily used in the furniture and carpentry industries, where high standards of quality and efficiency are required.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Equipment: CE marking, documentation/manual, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. Njdpfx Agjwnx Agj Islh WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: used, Year of construction: 2007, Second-hand machine Year of manufacture: 2007 Features and technical specifications: Nesting system with grid table Machining dimensions: - X: 5000 mm - Y: 1240 mm - Z: 135 mm Travel ranges: - X: 5665 mm - Y: 1650 mm - Z: 325 mm Nsdpjzk Nvgofx Ag Ijlh with milling unit 7933: - Motor 11 kW (S6) - HSK 63 - water-cooled with C-axis with 18-position disc-type tool changer with 250 m³ vacuum pump with manual control unit with central lubrication with minimum quantity lubrication system Availability: at short notice Location: Röllbach

Condition: good (used), Year of construction: 2014, functionality: fully functional, Equipped with B-Solid software. Maximum workable height: 120 mm Maximum workable length with automatic feed: 3200 mm Tool changer with 22 positions Nledevr D Sispfx Ag Ioh Includes a new Quattro drilling unit.

Condition: excellent (used), 4-axis machining center work area: 3200 x 1350 mm automatic tool changer Nsdpfx Agezzd S De Ijlh

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Nsdpfx Asvctlgjg Ijlh Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24

Condition: used, optional equipment: Machine table in 2 support systems – left table half with TVN supports, right table half with ALU table and its own vacuum circuit. Travel ranges: X = 4400 mm, Y = 1720 mm, Z = 400 mm Tool holder HSK 63 F Motor 7.5 kW, 900 - 20,000 rpm Njdpfxezxzgmj Ag Ielh Inverter 18 kW for spindle unit – increased power output up to 11 kW Tool changer RAPID 24 = 24 tool positions Drilling unit with 18 spindles Equipment for door processing (H = 110 mm) - for processing left and right doors - with 4 pneumatic positioning aids, each with a capacity of 20 kg - 6 reference stops with veneer overhang Laser positioning for TV system Central extraction connection above the CNC unit Vacuum pump 250 m³ Control system/control cabinet: - NUM Series 1000 with Office PC - XILOG-PLUS - Cable remote control - Analog modem with software for teleservice Swinging machining standard for 2 work areas LED display / suction cup positioning Motorized chip conveyor 3-part floor mat / front Large accessory package with vacuum suction cups, stops, etc. Machine from a carpentry business closure due to retirement Machine is still in operation and in very good condition available at location

Condition: ready for operation (used), Year of construction: 2007, Brand: Holz Her Model: PRO-MASTER 7123K Serial no: 527/0-705 5010147 Nedpfx Aerz Irrog Ijlh Year of manufacture: 2007 - 2 HSK cones included + various drills for drill box - Comes with a number of suction cups and some spare parts Tech. info: 4-axis (c-axis) 6 beams Motor-controlled adjustment of beams Number of vertical boring bits: 24 Number of vertical boring bits in X axis: 10 Number of vertical boring bits in Y axis: 8 Centres distance: 32 mm Horizontal double spindle in X axis: 2 Horizontal double spindle in Y axis: 1 Centres distance: 64 mm Working area: 3200x1260 mm Maximum travel path: X= 3866 mm Y= 1650 mm Z= 325 mm Workpeice pass height for tool change spindle with HSK 63F tool connection: 345 mm Max. machining thickness/ feed-in height (rear stop): 175 mm Max. workpiece size for vertical bores: X=3730R/ 3460L mm Y=1570 mm Max. workpiece size for horizontal bores X: X=3450R/ 3370L mm Y= 1315 mm Max. workpiece size for horizontal bores Y: X=4760R/ 3300L mm Y= 1385 mm Max. workpiece size for edge milling, less cutter radius (tool 25 mmdiameter x 125 mm, HSK): X=3510R/ 3525L mm Y=1445 mm Z=280 mm Max. workpiece size for grooving in X (dim. centre grooving tool approx. 120 mm): X=3300R/ 3760L mm Y=1585 mm Max. workpiece size for grooving in Y (dim. centre grooving tool approx. 120 mm): X=3200R/3860L mm Y=1485 mm Max. travel speed X axis: 100 m/min Max. travel speed Y axis: 100 m/min Max. travel speed Z axis: 25 m/min Max. travel speed C axis: 60 m/min Motor power of boring unit: 3 kW Motor power of saw: 1,5 kW Motor power of electro spindle unit with clamping system: 6 kW Speed electro spindle 1000-18000rpm Power: 22 kW, 50 Hz, 400 V, 3-phase Compressed air: operating pressure 6,0 bar permissible limit pressure 8,0 bar Air requirement: 300 l/min Extraction capacity: approx. 5300 m3/h Dust nozzle diameter: 250 mm Size: Length with control cabinet: 6420 mm Overall width: 3760 mm Height with extractor hood: 2475 mm Weight: 4200 kg Program Campus NC-HOPS Operating system Microsoft Windows Graphic variants system with HOP and CAD/CAM properties For the creation of parts variants with macro technology Program operation Windows-conform surface configuration and operator guidance Macro / variant programming Indication and simulation modes Export and import facility to the various branch programs Interaction possibilities with a variety of branch programs Stock no: 2002061BXA with reservation for incorrectly presented technical data

Condition: used, Year of construction: 2013, Working center with automatic robot for panel loading and unloading management Biesse XP600 Numerical Control with Biesse Works ADVANCE graphic interface software - machine version and version office - WRT technology (Widows real time) the machine control logic is processed directly on the PC and not on a dedicated special device Working field in X axis 6200 mm Working range in Y axis mm 1552 Working field in Z axis 180 mm Z axis travel mm 235 N ° 2 work fields in X axis Bar worktop \ console No. 10 EPS electronically adjustable bars for suction cup support N° 8 pneumatic bakelite bars for lifting the panel - loading / unloading aid N° 4 EPS electronically adjustable suction cups for each bar with vacuum seal for fixing the panel during the processing N° 1 vertical electrospindle, with automatic tool change, motor KW 12 - 12000 RPM - flange for aggregates - preparation for C-Axis Vector Automatic tool change system with 12 positions - positioned on the machine head BH35L boring head with spindles arranged as follows: - N° 14 verticals in X axis - N° 10 vertical in Y axis - N° 6 horizontal in X axis - N° 4 horizontal in Y axis Independent blade for making grooves in the X axis - diam. 120 mm Front protection and safety system with carpets Perimeter protection grids Automatic lubrication system Machine control cooling and cleaning system with conditioner Vacuum pump mc / h 250 Kuka industrial robot with 6 articulated axes with point-to-point positioning. Independent control panel Panel alignment table Barcode reader on the robot arm Panel introduction system via: * 1 motorized roller conveyor for panel stack preloading * 1 translating motorized roller conveyor * 1 motorized panel stack unloading roller conveyor Nodpskvrxujfx Ag Ielh Technical features: * Type : KR210-2 * Number of axles : 6 * Admissible nominal load : Kg 210 * Machine weight : Kg 1267 * Sound level: 75dB * Installed power: 25.8 kW * Panel dimensions - Min\max length: mm 300\3000 * Panel dimensions - Min\max width: 180\1500 mm * Panel dimensions - Min\max thickness: 8\60 mm * Max panel weight: Kg 90

Condition: good (used), Year of construction: 2005, Used machine MAKA PE 70 5-axis CNC machining center for machining wood and plastic. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2005 Technical data: CNC control BWO 920 for 5-axis machining. LCD display 10.4" 2 MB NC memory, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,500 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,900 mm X-axis: 1,250 mm Z-axis: 300 mm / with 180 mm installation height (upper edge of vacuum suction cup) A-axis 540° (rotation axis) B-axis 196° (swivel axis +/- 98°) Rapid traverse speed X/Y axis 45 m/min. Z-axis 24 m/min. A/B-axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power 7.5 kW (S1) 10 kW (S6), speed continuously adjustable up to 22,000 rpm, milling spindle HSK-F63, water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - HSK-F63 tool interface for automatic tool change system. - 1 horizontal drum magazine, with 20 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 x control circuits for "lifting / lowering" stops - 2 x control circuits for "lifting / lowering" slide bar - 2 x control circuits for "clamping / releasing" pneumatics - 2 x vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Vacuum supply: - Machine designed with vacuum system. - 2 x vacuum clamping circuits - 1 vacuum pump, suction capacity per vacuum pump approx. 130 m³/h, with tank. - Vacuum supports with various suction plates. Other: Nlsdpfevr A A Tex Ag Ijh - Automatic central lubrication. - Control cabinet with air conditioning unit. Work safety: - Mobile protective cabin with safety bumpers on the operator side. Repairs / maintenance before delivery: - New maintenance. - New slatted curtain on the portal - New sliding window - New Y-axis energy chain - New Z-axis energy chain - Various cables and air hoses replaced.

Condition: used, Year of construction: 2014, Maximized productivity with two heads and two autoloaders. The exclusive design of hopperfeeders (Pade patent) allow the manual loading of the pieces without any barrier in front of the operator. The piece-holder magazine can be easily “parked” to the side to allow the manual loading of the pieces. Pneumatic clamps with locking from bottom to top that can be easily positioned on the TANDEM pods in order to quickly change the configuration from manual to automatic loading. Main features: - Working heads with the possibility of choosing between 1, 2 and 4 spindles - 2 working tables with pods, vacuum table or combined with customizable dimensions - Possibility to add single or multiple clamping systems and CNC lathe - Automatic workpiece loaders with magazine - E-LAB programming system, automatic trajectories manager Main functions: Njdpfxsxw Ty Ns Ag Iolh - Mortising - Drilling - Milling - Cutting - Tenoning

Condition: good (used), Year of construction: 1999, functionality: fully functional, input voltage: 400 V, Used machine MAKA FPM 470R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. The machine was last used in wooden staircase construction. Year of manufacture: 1999 // RETROFIT in 2019 Technical data: CNC control BWO Vector 921 for 5-axis machining. 256 MB NC memory, USB connection, mobile control panel. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (OK vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,600 mm Z-axis: approx. 380 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis), B-axis 196° (swivel axis +/- 98°) Rapid traverse speed: X-/Y-axis 45 m/min., Z-axis 15 m/min., A-/B-axis 10,000 °/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 2 chain tool magazines with 32 spaces each for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 2 step separators, stroke approx. 320 mm. - Various clamping devices for posts and curved parts. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Tools: Tools are not included in delivery! Nlsdpfx Aovmpx Rsg Ioh Vacuum supply: - 1 vacuum pump, including tank with 250 liter capacity for quick vacuum build-up. - approx. 20 vacuum supports with various suction cups. - 4 lifting/lowering stops for positioning components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Traveling protective cabin with safety bumpers. Overhaul / repairs in 2018 / 2019: - Conversion of the rotary and swivel axis to a new generation of drives (digital). - New Y- / X- / Z-axis energy chains. - Complete new cabling, all power and measuring system cables renewed. - All guide carriages new - New Z-axis ball screw and guide rails. - New X-axis guide rail. - Control system converted to BWO Vector 921, with V-CNC card 256 MB NC memory. - New vacuum valves and vacuum hoses. - 2 x tool magazine + tool gripper overhauled. - Swivel suction overhauled. Software: - It is possible to take over a current version of the Compass staircase construction software. Compass is the leading provider when it comes to the planning and production of wooden staircases.

Condition: used, Year of construction: 2007, The SHARP double-table machining center with 6 or more interpolated axes has an extremely rigid gantry frame and is particularly suitable for the production of elements for chairs, furniture, tables, beds, shells, stair components and musical instruments. • 4 motors of 9.6 kW each • Possibility of machining elements up to 145 cm wide and 200 cm long • Technically efficient machine with PITAGORA simulator and anti-collision program, AlpaCAM software and OSAI control • Year 2007, machine no. 445 • Dimensions that are needed in the hall to set it (building dimensions) - width 3.7 m (from the operator's side) x length (depth) x 4.9 m • Equipped with: a) 4 higher tables for attaching elements / beams Nlsdpfxoxxh Has Ag Ijh b) 4 lower tables for attaching elements / beams c) vacuum pump d) bars with a length of 113 cm for vacuum / for mounting pressure / positioning cylinders - 4 items

Condition: used, Year of construction: 2000, Used machine Nlodsv S Dn Dopfx Ag Ish MAKA CNC Door Processing Center HC 55 TBZ Year of manufacture: 2000 CNC machining center for processing interior doors (hardware mortising, vision panel cut-outs, peephole machining, etc.) CNC control BWO 900C, with 1 MB memory, integrated PC. Working ranges: For door width: 250 – 1,280 mm For door height: max. 2,500 mm For door leaf thickness: max. 80 mm Rapid traverse speed: X / Y-axis: 45 m/min Z-axis: 10 m/min 1 universal milling unit SK40 With integrated A-axis swivel 190° (+/- 95°), along X-axis for lock/hinge machining on both sides along the longitudinal door edge directly with the unit. Water-cooled milling spindle, nominal output 8 kW, available from 7,000 rpm, continuously variable speed from 1,000 – 17,100 rpm, SK40 tool holder for automatic tool change. 1 chain-type tool magazine with 24 positions, for tools up to Ø 90 mm, for sorted storage up to max. Ø 160 mm, positioned at unit’s service position. Max. tool length 200 mm from spindle mount. Milling spindle and 2 x magazine positions equipped for angle/feeler heads with torque support. Machine table with width adjustment via program, as well as width measurement for edge processing for consistent milling depth on both sides. 1 set of infeed rollers for manual loading, automatically elevating and lowering. 1 longitudinal stop with pneumatic insertion stroke, mounted on the traversing unit for positioning according to door length and thickness. 4 pneumatic lateral stops, swing-in type, for doors with veneer/cover overhang up to max. 15 mm, with selectable height adjustment for varying stop heights on finished doors (single/double rebate doors). 2 vacuum clamping lines, 5 vacuum suction cups per line, 130/200 x 70 mm, with touch valve and blow-off device. Per line, 3 vacuum cups can be lowered according to the door height being processed. 1 vacuum pump, approx. 128 m³/h suction capacity, with 250-liter intermediate tank, enabling rapid vacuum build-up. Automatic central lubrication, free-standing control cabinet with air conditioner. Safety features: Bumper on both sides of the gantry, protective fencing on the sides. Various tools and tool holders can be taken over by agreement. The machine can be inspected in Hermaringen.

Condition: used, Year of construction: 2008, - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - Main spindle 7.5 Kw / 11kw Nodpfx Aozux Tijg Ijlh - Vertical drilling unit - Horizontal drilling unit - Dado cutter - Tool changer for 18 positions CNC machining center Manufacturer: IMA Type: Bima 300 Year of manufacture: 2008 Technical data - Machining area 4300 x 1250 mm - 8 pcs. workpiece supports - 1x Main spindle 7.5 Kw / 11kw (S1 / S6) HSK F63 1500 - 18000 rpm - Horizontal drilling unit - Vertical drilling unit - Dado cutter - 2x Vacuum pump, each 90 m³/h - Safety mats - IMA Wop software + office license

Condition: used, Machining area: - in the X direction without gluing 6000 mm - in the X direction with gluing 5000 mm - in the Y direction 1200 mm - in the Y direction with main spindle + center distance 20 mm 1300 mm max. workpiece height above - top edge of suction plate Z1 100 mm - max. workpiece thickness Z2, dependent on equipment/application Work table height: approx. 950 mm 1 main spindle with pneumatic feed stroke - drive power: 12 kW in S-1 operation - tool holder: HSK F63, taper diameter = 38 mm - tool change: automatic - change force: 11000 N - tool weight: max. 6 kg - direction of rotation: clockwise/counterclockwise, programmable - speed range: continuously variable 1500 - 24000 rpm, programmable - drive: frequency-controlled three-phase motor - spindle lubrication: single grease lubrication - spindle cooling: water cooling 1 CNC axis rotating 360 degrees 1 vertical drilling unit S21 Machine table consists of: - 6 support arms adjustable in the X direction, each with a rear and center stop, all stops controlled by the program - 6 sets of suction plates consisting of a total of - 6 suction plates 114 x 159 x 100 mm - 6 suction plates 125 x 75 x 100 mm Nsdpfx Agozupibj Ielh - The support arms and suction plates can be individually positioned according to the corresponding workpiece size. Changeover area: - without pendulum machining, without gluing: X = 2 x 2900 mm - free space in the middle: X = 200 mm - without pendulum machining, with gluing: X = 2 x 2150 mm - free space in the middle: X = 700 mm - with pendulum machining, without gluing: X = 2 x 2400 mm - free space in the middle: X = 1200 mm - with pendulum machining, with gluing: X = 2 x 1700 mm - free space in the middle: X = 1600 mm Feed drive system Rapid traverse rates: - X-axis 100 m/min - Z-axis 25 m/min Air pressure: 6 bar Tool changer magazine with 18 positions Tool coding: position-coded Tool weight: max. 6 kg Tool length: max. 150 mm Tool diameter: max. 100 mm when fully loaded max. 150 mm with free adjacent positions or nesting Central connection for extraction Mains voltage: 3/N/PE, 400/230 V, 50 Hz 1 vacuum pump 100 m3/h

Condition: used, Year of construction: 2007, - Working area: X = 4600 mm / Y = 1935 mm / Z = 275 mm - CE safety devices - 8 ATS plate holders - L = 1525 mm - 24 sliding rails - Automatic positioning of 8 plate holders and sliding rails (EPS X-Y) - Conveyor belt for removing chips and scrap - Pneumatic locking system, divided into 2 working areas in X - 8 rear reference stops with a stroke of 115 mm - 8 stops with a stroke of 140 mm, positioned at 1175 mm (L = 1280 - 1525 - 1800 mm) - 8 stops with a stroke of 140 mm, positioned at 770 mm (L = 1280, 1525, 1800 mm) - 4 lateral stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - 4 removable center stops with a stroke of 140 mm (2 left + 2 right), including pneumatic system. - Sensor for detecting lowered stops. - Pneumatic system for lifting rod holders. - 6 lifting rod holders for easy loading - H = 74 mm modules. - Vacuum system for a 250 m3/h pump - 250 m3/h rotary vane vacuum pump for standard vacuum system Composition C3-A1 - Device for mounting a chip deflector with a pneumatic or inductive sensor on a 5-axis machining unit. Nljdpfxezux Nwj Ag Ish - Flange for mounting aggregates on a work unit with 5 interpolating axes. *Aggregates can only be used if the spindle is in the vertical position. Composition C3-P2 - Additional Z-slide for rear work units, controlled by an independent Z-axis - 16 vertical and 4 horizontal drilling spindles in the Y direction - Chain-type tool changer with 22 positions at 180 mm center distance - Iron gripper for chip deflectors with pneumatic or inductive sensor, positioned in the chain-type tool changer - RH chip deflector with inductive sensor for standard spindle or 15 kW 5-axis spindle * requires the device for the chip deflector * requires the flange for mounting aggregates when using a 5-axis spindle * requires the C-axis when using a standard spindle - Liquid cooling unit for liquid-cooled systems, can cool two spindles or one spindle and a liquid-cooled drilling head. - Automatic lubrication system - Control unit with 5 interpolating axes. This unit enables numerically controlled interpolation of the spindle on 5 axes. The spindle has high power while simultaneously having reduced dimensions. Note: - Additional overhauled 5-axis main spindle - 8 horizontal drilling spindles, 12 vertical drilling spindles, and nut saw are out of order.

Condition: used, Year of construction: 2021, Technical Data Automatic Central Lubrication Working Area Axis Travel X = 4000 mm Y = 1670 mm Z = 500 mm Working Range X = 3300 mm Y = 1280 mm Z = 250 mm, clearance height depending on the clamping system Operator Terminal on the Left Side of the Machine Handheld Terminal for Controlling Axis Speed, Including an Emergency Stop Switch Machine Software: Woodflash Consisting of: - CNC Board - Tool Database - Program Editor Position Indicator for Workpiece Support and Vacuum Suction Cup Vacuum Connection for Template Milling on the Left Side of the Machine: Connection: 12 mm 1 Vacuum Pump with a Total Suction Capacity of 90 m3/h at 50 Hz or 108 m3/h at 60 Hz Milling Spindle 12 kW (S6) HSK F63 12 kW (S6) Full Rated Power at Approximately 12,000 RPM Nlodozux Iaepfx Ag Ieh Speed: 1000 - 24,000 RPM Air-Cooled C-Axis 0-360 for Milling Spindle 12-Position Linear Tool Changer on the Left Side of the Machine Frame, Including a Pickup Station for Aggregates Max. Tool Diameter: 250 mm Max. Tool Length: 240 mm Drilling Head DH 16 4H 2S 12 Vertical Spindles 7 Spindles in the X-Direction and 5 Spindles in the Y-Direction 4 Horizontal Spindles 2 Spindles in the X-Direction and 2 Spindles in the Y-Direction Pre-Travel = 70 mm Drilling Length = 70 mm Shaft Diameter D = 10 mm 2 Nut Saws, One Each in the X and Y Directions Max. Saw Blade Diameter: 120 mm Max. Blade Thickness: 5 mm Max. Speed, Continuously Adjustable: 7500 RPM Safety System with Light Curtain on the Front

Condition: excellent (used), Year of construction: 1995, CNC machine in good condition due to limited use. Previously used for door production but can be used for any purpose. Double table, can be loaded from the left and right. 4-axis x 5000 mm y 1350 mm z 450 mm a 190° Nedpeig T Epjfx Ag Iolh Main spindle SK 40, 8 kW, water-cooled Up to 17,000 rpm Chain magazine with 24 positions.

Condition: good (used), Year of construction: 1997, 3-AXIS MACHINE FOR DRILLING AND MILLING OF CABINET FURNITURE PARTS, WITH AUTOMATIC TOOL CHANGER FOR MILLING TOOLS Working area: 2,893 x 950 mm Maximum workpiece height: 65 mm Number of workpiece supports: 6 Number of vacuum cups per support: 2 1 milling motor, 6.8 kW Clearance height between tool holder surface (motor) and top edge of vacuum cup: approx. 250 mm 2 tool changers: 3-position traveling and 4-position lateral Grooving saw fixed in X axis Nledpfey Iaihox Ag Ish Number of vertical drilling spindles: 10 Number of horizontal drilling spindles: X 2 + 2, Y 1+1 Vacuum pump 100 cbm/h Controller: NC 410 Safety tread mat in front of the machine

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Nodpfxsxc Ir Rj Ag Iolh