Used Machining centers with traverse tables for sale (175)

Condition: used, machine/vehicle number: 006351, X axis working area: 4250 mm Ndjdpfjwcyflox Af Ejc Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 31 Total number of tool changer positions: 38

Condition: good (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0-201-22-4204, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 30 m/min, controller manufacturer: Siemens, workpiece length (max.): 3,000 mm, workpiece width (max.): 1,150 mm, workpiece height (max.): 80 mm, rotational speed (max.): 18,000 rpm, operating hours of spindle: 1,000 h, spindle motor power: 7,500 W, number of spindles: 1, number of slots in tool magazine: 12, input voltage: 380 V, type of input current: three-phase, Equipment: documentation/manual, rotational speed infinitely variable, Main spindle with C axis Ndjdpfx Aexdxg Iof Esc

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots Ndedpfxjt Txfps Af Esc BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 4000mm Max working height: 180mm Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 0-250-15-0310, travel distance X-axis: 6,250 mm, travel distance Y-axis: 1,300 mm, rapid traverse X-axis: 80 m/min, workpiece diameter (max.): 60 mm, number of slots in tool magazine: 9, TECHNICAL DETAILS Travel Paths Travel distance X-axis: 6,250 mm Nodpfsxdw Tgsx Af Eedc Travel distance Y-axis: 1,300 mm Rapid Traverse Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 60 m/min Rapid traverse Z-axis: 20 m/min Stroke X-axis: 8,360 mm Stroke Y-axis: 2,015 mm Main Spindle Motor Power: 9 kW Number of controlled axes: 3 Number of drilling spindles: 50 Maximum workpiece diameter: 60 mm Tool positions: 9 (8 in tool magazine 1, 1 in tool magazine 2) MACHINE DETAILS Installed total power: 18 kW Control system: HOMATIC-200 Control model: WOODWOP 7.0 Safety standard: CE marking EQUIPMENT Documentation/manual Infinitely variable speed control Automatic tool changer Vacuum pump Worktable with vacuum console supports Suction elements for workpiece holding 1 milling unit 2 drilling units (each with 25 drilling spindles) 2 cutting units Note: Tools are not included in the sale and delivery scope.

Condition: used, Year of construction: 2019, Technical details in the attached .pdf document - X axis longitudinal travel 2700 mm - X-axis useful stroke (spindle only – unit A) 1900 mm - Useful stroke X-axis (sander only – unit B) 2050mm - Useful travel X-axis (milling cutter only – C unit) 2050 mm Ndodsxdw D Eopfx Af Ejc - Useful travel of X-axis (gouge only – D unit) 1500 mm - X-axis useful stroke (blade only – E unit) 1750 mm - Useful stroke X-axis (sander only – F unit) 1500 mm - Useful stroke of X-axis with all groups 1500 mm - Y-axis transverse travel 380 mm - V-axis transverse travel 720 mm - Z-axis vertical travel 630 mm - B-axis stroke (electrospindle) +/- 90° - A-axis rotation (divider) infinite - Dimensions: 4000 x 3100 x 2500 mm - Installed power 65 Kw - Compressed air 6 bar - Power supply 380 Volts, 3 / 50 Hz.

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 1000028154, Equipment: rotational speed infinitely variable, The machine was commissioned in 2019, single owner. It has seen very little use. Description Useful working area, 5-axis configuration: X=3280mm, Y=1600mm Axis travel: X=3706mm, Y=2294mm, Z1=515mm, Z2=371mm Axis traverse speed: X=80m/min, Y=60m/min, Z=30m/min Electrospindle: HSD, 5 axes 11 kW, with continuous 360° rotation on B and C axes, enabling high-precision machining of complex shapes liquid-cooled Ndsdpfxoxdl H Uo Af Ejc Drilling head: HSD 20 vertical spindles 4 horizontal spindles grooving discs on X-axis grooving discs on Y-axis Work table: 6 cross beams Isbjwhypnjni Itxtobb 4 suction cups per beam preparation for uniclamp Tool magazines: 16-position revolver-type tool changer Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring firm clamping of the parts during processing

Condition: used, machine/vehicle number: 005521, X axis working area: 4000 mm Y axis working area: 1400 mm Working Table: Pod and Rail Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 30 Total number of tool changer positions: 24 Ndjdpfsvctlgex Af Eec

Condition: good (used), Year of construction: 2003, functionality: limited functionality, machine/vehicle number: 0-201-22-4227, rapid traverse X-axis: 80 m/min, rapid traverse Y-axis: 80 m/min, rapid traverse Z-axis: 30 m/min, workpiece length (max.): 4,800 mm, workpiece height (max.): 80 mm, spindle speed (min.): 18,000 rpm, spindle speed (max.): 18,000 rpm, spindle motor power: 7,500 W, number of spindles: 2, number of slots in tool magazine: 18, Equipment: rotational speed infinitely variable, Main spindle equipped with C axis and extension for Flex 5 aggregate. Working area X: 4800 mm. Working area Y: 1300 mm. Working area Z: 80 mm. 8 consoles. 1 vacuum pump. 18-position travelling tool changer. Tool holder HSK 63. Adapter - horizontal boring head with 4 fixed spindles. Boring head with 17 spindles. Additional spindle with collet chuck. Measuring probe. Central automatic oil lubrication. Lifting rails for console table. Ndsdpjxdxa Ijfx Af Ejc

Condition: good (used), Production line consisting of: - BACCI FC 8 - BACCI DOUBLE JET - KUKA robots BACCI FC 8 The automatic copying-shaping-sanding machine executes milling and sanding operations on components of chairs, tables, armchairs, sofas, beds, furniture, frames, with the best finish and highest output. Max working length: 2700mm Max working height: 180mm Nedpfjt Tw S Uex Af Eodc Max working width: 500mm Max working width with round end: 350mm Max speed working table: 15m/min Max table return speed: 50-100m/min BACCI DOUBLE JET DOUBLE-JET is double machining centre with 6+6 interpolated CN axis, equiped with hopperfeeder system for automatic loading/unloading of the pieces.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 3,747 mm, travel distance Y-axis: 1,554 mm, travel distance Z-axis: 325 mm, workpiece length (max.): 3,620 mm, workpiece width (max.): 1,500 mm, workpiece height (max.): 180 mm, Equipment: rotational speed infinitely variable, Holz-Her / Machining Center PRO-MASTER 7017 - 2 software licenses (Office & Machine) Campus V8 CAD / CAM software - Machining area for milling = 3425 x 1287 mm (minus cutter radius) - Maximum workpiece height: 180 mm, measured from the top edge of the vacuum cup: 125 mm. Ndodpfx Afjxdlrds Eec - Maximum pass-through width at hood: 1450 mm (Y-direction) - The milling spindle delivers 10.3 kW (S6) and accepts tools with a maximum diameter of 160 mm via HSK interface. - Vector axis / C-axis can be retrofitted - Drilling unit with 14 spindles: 10 vertical and 4 horizontal. Maximum drill diameter: 35 mm. Integrated saw unit for a saw blade with a maximum diameter of 125 mm and 4 mm thickness. - 12-position linear pick-up tool changer for HSK 63F holders for tools up to a maximum diameter of 95 or 100 mm. Please also visit our "Classic Shop" on our homepage.

Condition: excellent (used), C.N.C. WORKING CENTER (POINT TO POINT) 4 axis (5 axis with FLEX 5) Gantry-drive (axe X) machine Numerical Control Control Powertouch (PC85) Software woodWOP Safety cabin (enclosure) of the working head Working table with pods and rails Mod. K-Table Support rails (No.) 8 Table dimensions (mm) 1340 Automatic deplacement by CNC (X axis) of the Supports rails LED system (on the rails) for the vacuum pods positioning Clamps for workpieces fixing - POWERCLAMP Automatic Tools Changing System Tools storage plate (No. of folds-positions) 18 Max. useful working area (X - Y - Z) mm 4000 x mm 1550 x mm 60 Max. useful working area (X - Y - Z) in edge banding (mm) 4000 x mm 1500 x mm 60 No. 2 Working areas - Vacuum pump (capacity m3/h) 100/140 Separate electric and command cabinet Motorized carpet to evacuate chips and wastes Total installed power (52 A) WORKING GROUPS (TOP): No. 17 Independent vertical boring spindles (High Speed 7500) No. 4 Independent horizontal boring spindles (No.2 in X-axe + No. 2 in Y-axe) Ndodpfx Afew Dc Nij Eoc Drilling head motor-power (Kw) 2,2 No. 1 Vertical electro-spindles HSK63. Vertical electro-spindles motor power (KW 15) No. 1 Edge Banding head on board (axe Y) Power Edge, Glueing Unit (Hot Melt + Quick Melt Unit) Edges (tape) thickness in rolls (min/max) mm 0,4 - 3 Edge coils supporting unit (N. 1 reels/Coils) Pre-End cutting unit Crosshead aggregate (4 horizontal drilling spindles) N° 1 Circular saw aggregate (diam. mm 125) Combined aggregate (Flush-Trimming/Scraping)

Condition: good (used), Machining center HOMAG BAZ 723 58/18/FC 4-axis CNC portal machine with 2 moving tables and edge banding unit Nsdpfxsxc Ir Rs Af Eedc

Condition: used, machine/vehicle number: 008171, X axis working area: 4200 mm Y axis working area: 1400 mm Working Table: Pod and Rail Nedsxaud Ujpfx Af Ejdc Main Electrospindle power: 15 KW Number of controlled axes: 4 axes Total number of drilling spindles: 35 Total number of tool changer positions: 18

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 0-201-06-9022, rotational speed (max.): 24,000 rpm, distance between spindles: 32 mm, working height: 950 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Workpiece length Single setup: max. 4,000 mm Pendulum setup: max. 1,375 mm Ndjdpfjw Upu Sjx Af Esc Workpiece length for milling operations with 25 mm tool diameter Single setup: max. 4,175 mm Double setup: max. 1,950 mm Pendulum setup: max. 1,550 mm Workpiece width – front fence, operator side Milling with 25 mm tool diameter: max. 1,220 mm All units (except drilling head): max. 1,150 mm Workpiece width – rear fence Milling with 25 mm tool diameter: max. 1,730 mm All units: max. 1,600 mm Extension of consoles available as option, order no. VK 7375 Workpiece thickness Including clamping devices: max. 300 mm With standard clamps, unlimited: up to max. 60 mm Dimensions are not equivalent to the maximum possible processing sizes per unit – see separate tables Minimum workpiece size: Dependent on clamping devices, workpiece surface and contour Working height Bottom edge of workpiece: 950 mm Main spindle Power S6: 18.5 kW Power S1: 14.5 kW Tool holder: HSK F63 – DIN 69893 Tool weight: max. 6 kg including holder Tool length: max. 200 mm from lower edge of motor spindle Milling tool diameter: max. 180 mm Grinding tool diameter: max. 200 mm Speed range: 0 – 18,000 rpm Full torque: 0 – 12,000 rpm Full rated output: from 12,000 rpm Maximum speed: 24,000 rpm Disc tool changer Capacity: 18 positions Tool holder: HSK F63 Configuration option 1: 18 x max. diameter 130 mm Configuration option 2: 9 x max. diameter 180 mm and 9 x max. diameter 70 mm Drilling head Spindles: 17 Motor power: 4 kW, frequency controlled Speed range: 4,500 – 6,000 rpm Function: vertical drilling Stroke: 50 mm Drill spindles: up to max. 35 mm drilling diameter Spindles X-direction: 11 Spindles Y-direction: 7 Spindle spacing: 32 mm Total drill length: 70 mm Shaft diameter: 10 x 20 mm Rotation direction: Alternating left/right MACHINE DETAILS Footprint: 5,000 x 7,750 x 3,000 mm EQUIPMENT 2x vacuum cups per console Note: Unless expressly stated otherwise, tools, tool holders, units, and mechanical clamping devices that may be visible in photos and videos are not included in the scope of delivery.

Condition: excellent (used), JET is a numerically controlled machining center with 5 interpolated axes, designed for machining operations as: Tenoning / Finger Jointing / Drilling Mortising / Milling / 4/5 axes profiling. Technical data: Nedpfx Aoirmyqef Esdc Full digital NC axes N. 5 Interpolated linear axes N. 3 Interpolated rotating axes N. 2 Longitudinal X axis 1,800 / 2,200 mm Transversal Y axis 1,300 mm Vertical Z axis 650 mm Length of clamp support table 1,400 / 1,800 mm A axis - Unlimited C axis +/- 180°

Condition: reconditioned (used), 3-AXIS DRILLING & MILLING CENTER WITH FIXED RIGHT-ANGLE HEAD, DUAL HORIZONTAL SPINDLES Ndjdpfew E Hb Sox Af Eoc Brand: SCM Model: TECH Z 2 27 C Year: 2007 (Machine offered in working condition, reconditioned, without warranty) TECHNICAL SPECIFICATIONS: - Working area: Between lateral stops along X: 2650 mm Electro-spindle axis X travel: 2903 mm Electro-spindle axis Y travel: 1240 mm Vertical drilling bits Y travel: 1018 mm - Max. panel size for double-station machining: 1180 mm - Max. panel thickness: 180 mm - X-Y axes vector speed: 54 m/min - Z axis speed: 11.5 m/min - Z axis stroke: 200 mm - Main motor power: 2.2 kW (3 HP) - Spindle rotation speed: 4,000 RPM - Spindle taper type: M 10 - Machine weight: approx. 2,800 kg COMPONENTS: WORK TABLE: 4 beams for support suction cups L=1000 mm for automatic round suction cups with aluminum bodies (2 per beam) 2 additional universal supports H=25 mm 4 suction cup supports for contouring VACUUM PUMP with a capacity of 100 m³/h Centralized extraction conveyor Automatic centralized lubrication for X & Y axes Pneumatic workpiece support device for tables L=1000 mm MILLING: HSK 63 electrospindle with increased power of 7.5 kW - Rotation speed 1,500/24,000 RPM controlled by inverter - Right and left rotation selectable via CNC - (1) HSK 63 cone with (straight) tool holder included - Collet not included (tools not included) Rear tool changer magazine with 8 positions: R8L - Can hold 8 tools, each up to Ø 120 mm - Each toolholder seat supports up to 4.5 kg - Maximum total weight of tools and holders for magazine "R8L": 22 kg HORIZONTAL UNIT WITH 2 OUTPUTS for MILLING and GROOVING: - Rotation speed: 9,000/18,000 RPM - Motor power: 3 kW (4 HP) - Milling tool (front output) max. Ø 20 mm - Usable length of front milling tool: 110 mm - Milling tool (rear output) max. Ø 12 mm - Usable length of rear milling tool: 80 mm - Blade Ø 100 mm DRILLING: 12 independent spindles for vertical drilling (7 along X and 5 along Y) 3 independent heads, each with 2 spindles for horizontal drilling: * 2 heads along "X" (64 mm pitch) * 1 along "Y" INTEGRATED OPERATOR GROUP for FIXED disc cutter, for grooving along "X" - Disc cutter rotation speed: 4,000 RPM - Motor power: 2.2 kW - Disc cutter max. Ø 120 mm - Compressed air consumption: 150 nl/min - Extraction port: Ø 160 mm PC-OFFICE (Hardware configuration): - Operating system: Windows XP - 15" CRT color monitor - QWERTY keyboard - INTEL CELERON microprocessor, 2 GHz - 40 Gb hard drive - 128 Mb RAM - 3.5" floppy disk drive, 1.44 Mb - 52x CD-ROM drive (Machine offered in working condition, reconditioned, without warranty)

Condition: good (used), Year of construction: 2002, Working range X 6,170 mm Working range Y 1,380 mm Working range Z 155 mm Main motor Kw7.5 kW Max rotation speed 24,000 rpm Aggregate heads 4. axis C-axis tool change positions 10 vertex boring heads 20 Horizontal boring heads X 6 Horizontal boring heads Y 2 Njdpor E A U Ijfx Af Eodc Arm structure Work surface Console table Number of bars 10 Positioning aid Vacuum pump capacity 2 x 125m³/h Chip conveyor belt

Condition: good (used), Year of construction: 2006, 3 XYZ axes beam table with suction cups fencing included in the set Njdsw Iluhjpfx Af Ejdc sold without tools

Condition: used, machine/vehicle number: 008169, X axis working area: 4500 mm Y axis working area: 1500 mm Working Table: Pod and Rail Ndodpfx Asxaud Iof Ejc Number of controlled axes: 4 axes

Condition: good (used), Year of construction: 1985, functionality: fully functional, Used machine in good technical condition, 100% operational. Year of manufacture: 1985. - 3-axis machine with a beam worktable. Nodpfx Afeu U H D Ue Ejdc - Working range: x=2500; y=1200; z=250. - Table without extraction. - Speed: 18,000 rpm. - Motors power: 15 kW. - Magazine for 16 tools. Model NUM 760.

Condition: repair required (used), Year of construction: 1998, machine/vehicle number: 0 250 12 0215, Weeke Optimat BP 150 | High-quality Point-to-Point CNC Router. This machine features the large drilling block, a C-axis spindle, and an auxiliary spindle. Due to the hard drive replacement, the automation drivers need to be reprogrammed. Router spindle: 7.5 kW (10 hp) (Constant power from 9,000 rpm to 18,000 rpm) ATC tool magazine: 8 tools Auxiliary router: 5 kW (7 hp) Ndodpsxb Di Ajfx Af Esc Drilling block: - Number of vertical drilling spindles: 31 - Vertical drilling spindle power: 1.5 kW (2 hp) - Number of horizontal drilling spindles: 6 - Horizontal drilling spindle power: 1.5 kW (2 hp) Table: - Number of panel supports (rails): 8 - Becker vacuum pump capacity: 100 m³/hr - Working length: 3250 mm - Working width (support bench): 1200 mm - Max. panel thickness: 100 mm (4”) - Max. drilling depth for through holes: 38 mm (1.5”) Axis travel/positioning speeds: - X-axis: 4730 mm / 80 m/min - Y-axis: 1685 mm / 80 m/min - Z-axis: 280 mm / 25 m/min Machine weight: 5,500 kg

Condition: good (used), Year of construction: 2009, Used MORBIDELLI Universal TV 3012 CNC. - Year of manufacture: 2009 Ndsdpow Epqiefx Af Esc - Available September/October 2025 - Good condition

Condition: used, Year of construction: 2017, Direct Numerical Control NC HOPS with Campus software Working range in X axis mm 3400 Working field in Y axis mm 1600 Working field in Z mm 300 Worktop with 6 adjustable bars No. 3 suction cups each work bar for holding the piece being processed N° 1 5-axis electrospindle, 10 KW, with automatic tool change, Hsk F63 type cones Boring head with 24 spindles as follows: N. 12 Y-axis vertical spindles N. 6 X-axis vertical spindles N. 4 horizontal spindles Y axis N. 2 X-axis horizontal spindles Automatic tool change system with 18 positions - positioned on the back of the machine Frontal protection and safety system with carpets and perimeter nets Automatic lubrication system Air conditioning system for the switchboard No. 1 vacuum pump Nodpfswwiybjx Af Esdc

Condition: used, machine/vehicle number: 007716, X axis working area: 3250 mm Y axis working area: 1220 mm Working Table: Pod and Rail Main Electrospindle power: 12 KW Number of controlled axes: 4 axes Ndsdpfxjwuz N Ne Af Ejc Total number of drilling spindles: 18 Total number of tool changer positions: 16

Condition: used, machine/vehicle number: 006579, X axis working area: 3130 mm Y axis working area: 1250 mm Working Table: Pod and Rail Main Electrospindle power: 6 KW Ndedpfx Afopz T Sas Ejc Number of controlled axes: 3 axes Total number of drilling spindles: 14