Used Walter Woodtronic for sale (65)

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence Rodpfx Aoypbx Eog Uou 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC 5D Year of manufacture: 2000 Carbide saw blade sharpening machine Condition: will be fully refurbished Used 7-axis CNC for face and back grinding - Diameter: 80 to 850 mm - Cross indexing table - SIEMENS MMC103 CNC control - All tooth geometries supported - Numerous options Pictures for reference only. Rodjyuutyopfx Ag Uou

Condition: not inspected (used), Brand: Walter Model: Woodtronic CNC5 with 2-pallet loader Year of manufacture: 2000 Sold as is. Used 8-axis CNC carbide saw blade grinding machine for face and back grinding, with linear loader (2 stations). Diameter range: 80 to 850 mm - Standard measuring probe for recording and managing grinding parameters - SIEMENS MMC103 CNC control - All tooth geometries 2-pallet loader - Blade diameter up to 600 mm - Magnetic pins Options available on request Rsdpfxsxm T Huj Ag Uju Contractual photos

Condition: not inspected (used), Year of construction: 2000, Brand: Walter Model: Woodtronic CNC6F Year of manufacture: 2000 Sold as-is, machine for production or resharpening of the sides of carbide-tipped saw blades. - Diameter range: 80 to 800 mm Rsdpfxeytn Sys Ag Usu - SIEMENS 840DI CNC control - CNC axes Siemens Simodrive 611 - Automatic blade measurement and grinding wheel compensation - Variable spindle speed Images are for reference only.

Condition: not inspected (used), functionality: unexamined, power: 2.5 kW (3.40 HP), overall weight: 1,000 kg, table length: 350 mm, table width: 200 mm, No reserve price – guaranteed sale to the highest bidder! Placement of a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Table dimensions: 350 mm x 200 mm MACHINE DETAILS Connection: 2.5 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,100 x 2,200 mm Machine weight: 1,000 kg EQUIPMENT Suitable workbench with various copper electrodes Two-axis digital display (Manufacturer: HEIDENHAIN) External reference: 30 Redpfoy D T Ehjx Ag Uju

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Redjzavqwopfx Ag Uou Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: good (used), Internal article no.: 24021 Redpfx Agjtr A D Re Uou Boring head / fine boring head Mounting: HSK-A63 Manufacturer: Walter GHM Designation: B4030 G. N6 / 070-090.Z1 Diameter: 70 - 90.5mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, CNC tool grinding machine Walter Helitronic Raptor Redpfsy U Up Nsx Ag Uou - Year of manufacture: 2021 - Fanuc control system with Toolstudio - X-axis travel: 460 mm - Y-axis travel: 320 mm - Z-axis travel: 660 mm - Spindle power: 11.5 kW - Up to 3 grinding wheels per spindle end

Condition: excellent (used), Year of construction: 2018, CATALOGUE NUMBER 8009 TECHNICAL DATA - max. material width 600mm - max. cutting height 170mm - diameter of upper spindle 70mm - diameter of lower spindle 70mm - diameter of circular saw: option 1: 250mm/350mm, option 2: 300mm/300mm - length of upper spindle working part 550mm - length of lower spindle working part 550mm - spindles equipped with a brake - spindle wedges 2 pcs - power of upper drive spindle motor 18.5kW - power of lower drive spindle motor 22kW - power of feed drive motor 2.2kW - stepless feed speed adjustment via a frequency inverter - average diameter of dust extraction nozzle 2x200mm from above: - pawls 2 rows - toothed draw roller - saw arbor - toothed draw roller - sliding roller, metal from below: - draw chains - saw arbor - draw chains - sliding roller, metal - overall dimensions L/W/H 3170/1450/1730mm - weight approximately 2500kg ADVANTAGES – Polish production – multi-blade, two-spindle saw – year of production 2018 – documentation: DTR + CE – used multi-blade saw, very good condition Net price: 78900 PLN Rsdpfx Asy Uvlxsg Usu Net price: 18786 EUR, depending on the exchange rate of 4.20 EUR (Prices may change due to significant exchange rate fluctuations)

Condition: excellent (used), For sale: high-quality milling head from the renowned brand Walter – Xtra-tec® series, designed for precise roughing and semi-finishing of metals. Premium industrial tool, ideal for CNC machining centers and conventional milling machines. • Working diameter: Ø80 mm • Model: F4033.B27.080.Z07.06 • Mount: SK40 / ISO40 • System: Xtra-tec® • Number of insert pockets: 7 • High-quality build – German Walter precision • Applications: face milling, machining of steel, cast iron, alloys • Condition: used, very good technical condition, ready for work. This milling head delivers excellent performance and long service life – ideal for industrial, workshop, and production applications. Rjdpfxsxlgnis Ag Uou

Condition: excellent (used), Year of construction: 2016, operating hours: 8,100 h, functionality: fully functional, machine/vehicle number: 2066-5172, Equipment: documentation/manual, CNC Tool Grinder WALTER HELITRONIC ESSENTIAL – year of manufacture 2016 For sale: 5-axis CNC tool grinder from the renowned manufacturer Walter Maschinenbau GmbH. The machine is designed for precision machining of cutting tools such as end mills, drills, as well as special and multi-flute tools. The unit is fully operational, regularly serviced, and maintained in excellent technical condition. BASIC DATA Model: WALTER HELITRONIC ESSENTIAL Year of manufacture: 2016 Control system: FANUC Number of axes: 5 Operating hours: 8,100 h Redjyz Dwcjpfx Ag Uju Power supply: 3 x 400 V AC, 50/60 Hz Connected load: 25 kVA TECHNICAL SPECIFICATIONS Travel distances: X = 330 mm Y = 213 mm Z = 475 mm Rapid traverse speeds X, Y, Z: 15 m/min A axis: 360° C axis: ±200° Spindle speed: 10,500 rpm Spindle motor power: 9 kW Spindle diameter: 70 mm Maximum grinding wheel diameter: 150 mm Maximum workpiece length (peripheral wheel grinding): 255 mm Maximum workpiece length (face wheel grinding): 185 mm Maximum grinding diameter (complete machining): 100 mm Minimum working pressure: 6 bar Air consumption: 8,000 l/h Coolant pump capacity: 80 l/min at 7 bar Coolant tank capacity: 350 l Machine weight: 3,300 kg Software: Tool Studio version 2.1 EQUIPMENT AND FEATURES Automatic loading arm The machine is equipped with an automatic tool loading system. The arm picks up tools from the input tray, transfers them for machining, and then places finished tools onto the output tray. This enables fully automated, uninterrupted production without constant operator supervision. Capability for mounting two grinding wheels Simultaneous mounting of two grinding wheels increases operational flexibility, reduces changeover times, and makes it possible to perform more complex operations without frequent wheel exchanges. Cooling for electrical cabinet HAOSCH cooling unit included. Additional equipment Professional measuring device for end mills and drills, providing fast, precise, and repeatable measurements to facilitate tool setup before machining. TECHNICAL CONDITION The machine is in very good technical condition Operated in clean production environment Fully enclosed work area for safety and noise reduction Regularly serviced.

Condition: used, Year of construction: 2001, longitudinal feed X: 490 mm Vertical feed Y: 320 mm cross travel Z: 660 mm Swivel range C: +/- 200 ° Control HMC 500 WWM Walter lenght tool piece capture A: 175 mm ISO 50 Max. rpm A: 60 min/-1 centre height 145 (190) mm max. workpiecediameter 320 mm max. workpiece length 320 (350) mm resolution 0,0001 ° Resolution 0,0001 mm spindle diameter 80 mm grinding wheel diameter max. 200 mm Max. rpm 0 - 7.000 min/-1 Rodjw E Npxopfx Ag Usu driving power - grinding spindle 24 kW max. Torque 6 Nm total power requirement 35 kVA weight of the machine ca. 4,65 t dimensions of the machine ca. 3,6 x 2,5 x 2,95 m CNC - Tool-Grinding-Machine WALTER - Helitronic Power Production - Optional for an additional charge: WALTER Heli ToolCheck (stock number 1039-9375) ?m=1039-9375&s=WALTER%20Heli%20Toolcheck

Condition: used, Year of construction: 2003, measuring range X-axis 300 mm measuring range Y-axis 290 mm measuring range Z-axis 650 mm tool diameter SK 50 mm Number of revolutions 30 U/min max. workpiecediameter 300 mm max. workpiece length 500 mm max. workpiece weight 40 kg Rodpfx Agow E Np Se Ueu accuracy +/- 0,002 mm Working speed X/Y/Z: 80 mm/s dimensions of the machine ca. 2,5 x 2,0 x 2,5 m weight of the machine ca. 1,2 t total power requirement 1 kVA Tool-Presetter WALTER - Heli Toolcheck

Condition: excellent (used), Year of construction: 2008, operating hours: 8,948 h, functionality: fully functional, spindle speed (max.): 9,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 660 mm, type of input current: three-phase, grinding wheel diameter: 200 mm, overall weight: 4,500 kg, grinding length: 350 mm, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, grinding spindle motor power: 11,500 W, input voltage: 400 V, year of last overhaul: 2026, CNC Tool grinding machine WALTER Helitronic Power TECHNICAL CHARACTERISTICS: Year of manufacturing: 2008 CNC control: FANUC Series 31i-model A5 Software installed: Tool Studio 3 Number of axes: 5 Height of centers: 145 / 190 [mm] Stroke X axis: 470 [mm] Rapid traverse rate X axis: 15000 [mm/min] Stroke Y axis: 330 [mm] Rapid traverse rate Y axis: 15000 [mm/min] Stroke Z axis: 660 [mm] Rapid traverse rate Z axis: 15000 [mm/min] Stroke A axis: 360 [°] Stroke C axis: +/- 200 [°] Max. workpiece lenght : end face grinding: 280 [mm] Max. grinding lenght: 350 [mm] Max. grinding diameter: 320 [mm] Max. grinding wheel speed: 9500 [rpm] Grinding spindle motor power: 11.5 [kW] Max. diameter grinding wheel: 200 [mm] Number of hours under power: 8948 [h] Coolant pump pressure: 7 [bar] Collant pump flow rate: 120 [l/min] Lubrication tank capacity: 400 [l] Supply voltage: 400 [V] Total power required: 25 [kVA] Weight: 4500 [Kg] INCLUDED EQUIPMENT: x1 TOOLSTUDIO 3 software x1 direct-drive A axis (Hollow Shaft) x1 automatic tool clamping system x1 RENISHAW LP2 part probe x1 DSL Air Technology type AES-GAMMA 30 mist extractor x1 lubrication tank + paper filtration system x1 GRUNDFOS coolant pump x35 grinding wheel holders (equipped with CBN wheels) x22 ISO50 attachments x1 SCHUNK collet holder x22 collets x1 NIKKEN collet holder x13 NIKKEN collets x1 metal rack for grinding wheel holders and ISO50 attachments 1x ISO50 calibration mandrel intended for axis calibration 1x calibration disc intended for axis calibration x1 set of service wrenches Various technical manuals Machine visible under power in our premises by appointment. Rsdpfey Sxrpjx Ag Ueu Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps, and drills. Machine similar to brands such as Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter. Also see cylindrical or surface grinding machines, lathes, machining centers, and milling machines.

Condition: used, centre height / mm Rsdpfxjy Suqze Ag Uou weight 110 kg diameter 400 mm

Year of construction: 1995, condition: ready for operation (used), Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible. Redpfjy Tx Sxox Ag Usu

Condition: used, Panning machine, Coating pan machine,Pralines and Drages, Used Machine Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Rjdoypvhzjpfx Ag Ueu Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Condition: used, Year of construction: 1986, grinding length . mm grinding width . mm workpiece height . mm Table 870x130 mm total power requirement 2,5 kW Rodpfx Ajytx Ifsg Uju weight of the machine ca. 0,8 t dimensions of the machine ca. 2x1x2 m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: new, Year of construction: 2023, Walter TD500 KBA prism machine for sale. It was only unpacked for the photo and has never been operated. Purchased for a new production line that was never realized. Lower motor 22kW, upper motor 18.5kW. Can be tested on site. Rjdpfey Sw T Sox Ag Uju

Condition: good (used), centre height 220 mm table diameter 220 mm 250mm - chuck - 3 jaws Rjdpfsu Sbl Rjx Ag Usu 80mm passage Can be used vertically and horizontally Standing tip height 220mm

Condition: ready for operation (used), Centre height: 80 mm Spindle bore: 18 mm Spindle mount: MT 3 Rodpfeyv Dy Tox Ag Usu Swiveling range: +110 / -20° Weight: 33 kg

Condition: new, Walter Technic Compressor Redpfx Asy Nlwtog Usu Model: SKTG 5.5 PP Kombo Dryer, Automatic condensate drain, Tank: 500 litres, Pressure: 10 bar, Capacity: 700 litres per minute, Weight: 505 kg.

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min Redpjh Dwmlsfx Ag Uju - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: good (used), Execution : . - Clamping surface D = 400 mm Redpfx Ajy Hdnfsg Uou - Overall height 196 mm - . - 3-jaw chuck TOS , D = 250 mm , very good condition .

Year of construction: 1963, condition: ready for operation (used), Max. forming force: 80t, connected load: 3.5kW, current type: 3 phases, frequency: 50Hz, operating voltage: 380V, control voltage: 24V, rated current of the machine: 10A, rated current of the supply fuse fast-blow: 25A, slow-blow: 15A, weight: 1.79t. With documentation, without accessories or spare parts. Regularly maintained, machine has a defect, the speed adjustment no longer functions fully. An on-site inspection is possible. Rodpfxsy A Smbj Ag Ueu