/ min. size: 465 x 728 mm / max. size: 940 x 1270 mm / max. pressure: 600 ton / equipped with: Mabeg nonstop feeder
Ytep0g
Sale of Wupa PS4.3 due to company takeover.
Machine is in good condition and ready for use.
Sheets per hour up to 7000
G0j7fybs0
Maximum size 800x1120
Minimum format 360x500
Mabeg Non-Stop feeder.
further equipment see photos
Available immediately.
Dismantling and transport must be taken over by the buyer.
Access with forklift and truck problem-free possible.
2007 - Brausse 1050SE (Ref.No. 1003157
Operating hours: 46000
720 x 1020 mm / 28 x 40 inches
Delivery: Immediately
Equipment:
- Non-stop delivery
- Stripping Unit
- Non-stop feeder
O2bgz
7500 sheets/h
Format: 750x1050 mm
300 tons pressure/druck
MIIB Feeder
Raised 410mm
Palletfeeder
Non Stop Manuell (Feeder)
Bnsvbafo
Stripping Station
Stripping Station Equipment: 1 x Upper stripping frame - 1x Lower stripping frame
Blanking Station
Blanking Station Equipment: 1 x Upper blanking frame
Automatic Pallet Changing Device
Double Sheet Control - electronic
Center Line System: for Quick Job Changeover
Productions Speed : 8.000 Sheets / Hour
Cutting Pressure (Maximum) : 250 ton
Suitable material Paper und Carton (min.) : 90 g/m2
Suitable materi...
2004 - Bobst Sprintera 106-PER (Ref.No. 1006143)
Operating hours: 39835
Delivery: 01.2021
Rdympai9
Equipment:
- Non-stop delivery
- Blanking Station
- Stripping Unit
- Machine elevated C Format
- Non-stop feeder
Non-Stop Feeder (Varimatrix)
Stripping Unit
Non Stop Delivery
Chases 2x
Cuttingplates 2x
Technical Details:
Number of Cuttings : 27.000.000 Mio.
Largest Sheet Size X : 750 mm
Bx7oqmqe
Largest Sheet Size Y : 1050 mm
Min. Sheet Size X : 370 mm
Min. Sheet Size Y : 400 mm
Cutting Pressure (Maximum) : 300 ton
Die-Cutting Output Maximum : 7.500 Sheets / Hour
Die Cutting Area : 727 x 1050 mm
Technical data can vary according to job, consumables and possible other factors
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and board
shi...
Die-cutter Midas 1600 × 1100
The machine is fully operational, like new.
Production Spain.
Format in a frame 1600 × 1100 mm
Weight 10000 kg
380V power supply
Number of cycles 18 ± 2 / min
Rfxijce
Installed power of 8.5 kW
Equipment:
– pneumatic clutch
– console
– mounting frame
– 3 operating modes: continuous, time delayed, manual
– central lubrication
– additional safety covers
– maintenance tools
– hard sheet for pressure
The machine is available „on the spot”
used for processing of SCHÜCO profiles
Gq9zlwymq
/ year: 1961 / max. size: 630 x 900 mm / min. size: 295 x 350 mm
Crlczzi8
Heidelberg GTS
Bi0gsjjqix
Year 1960 - Serial-No. GTS 59 666N
Size min.: 85 x 120mm / max.: 340 x 460mm
Speed min.-max.: 1.500 sph - max. 4.000 sph
Punching pressure: 60T / Weight approx. 2300kg
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Stripping Station + Blanking Station
Non-stop Feeder
Technical Details:
Productions Speed : 8.500 Sheets / Hour
Cutting Pressure (Maximum) : 300 ton
Min. Sheet Size X : 350 mm
Min. Sheet Size Y : 400 mm
Max. Sheet Size X : 750 mm
Pavrd
Max. Sheet Size Y : 1050 mm
Max. Thickness Corrugated : 3 mm
Suitable material Paper und Carton (min.) : 90-100 g/m2
Suitable material Carton board (max.) : 1,5 mm
Technical data can vary according to job, consumables and possible other factors
Automatic die-cutting and embosing machine TL-780RD
The machine is built on a die-cutting basis with an automatic feeder, mounted on a common frame,
The machine was built on the basis of the legendary Sargolia machine.
Very quick machine preparation, incomparable with flat diecutting machines.
Technical data:
Max sheet format 780x560mm
Min format sheet 200x300mm
Max. Stack height 700mm
Material weight 100-2000g / m2
Max efficiency 2800 sheets / h
Power consumption 15kW + compressed air
Weight 6...
-machine in workshop refurbishment prozess- CUBE control system, 2 universal frame, Centre Line, Blanking station, Direct pallet loading, Automatic Universal feeder with non stop facility, Adjustable feed table with complement of infeed table furniture, Left and right hand side register lays, Bottom mounted gripper system, Double action stripping, Binder sheet insertion, hin plate with micro metric adjustment, tools for loading and transporting, Elevated 410 mm,
Bfw7jix7lr
Swing arm die cutter USM type DVSM-RF
flatbed die cutter - platen die cutter for the use of band knife die cutting tools
year of construction approx. 1975
pressure force 15 ton.
ram stroke approx. 110 mm
stroke speed 58 mm/sec
installation height max. 150 mm (without aluminium plate at the ram)
table size 900 x 450 mm
Bq3yvadxh8
ram surface 540 x 330 mm
- Stroke release via 2-hand
- swivelling of the ram press plate
- Aluminium press plate 15 mm at the ram (installation height with aluminium pla...
TOSI FUSELLING MACHINE 640/880 mm,
working format 640/880 mm,
automatic centralized lubrication,
single stroke/continuous/timed,
picard plate,
self-centring frame,
anti-intrusion side walls,
electronic inverter,
updated safety configuration with sensitive devices and interlocked protections, in full compliance with the current legislation on safety and hygiene at work,
Machine equipped with "DECLARATION OF CONFORMITY".
Machine RECONSTRUCTED TO NEW, immediately available, except for the sold.
Rff...
max. size 34 x 46 cm
age 1956
2 closing frames
ink unit not complete
without dry sprayer
Pabnb
Delivery time: immediately from stock
Black Model
Hwjmujln
Die-Cutting Output Maximum : 4.600 Sheets / Hour
Length : 3.500 mm
Height : 1.850 mm
Width : 2.000 mm
Max. Sheet Size X : 570 mm
Max. Sheet Size Y : 770 mm
Min. Sheet Size X : 210 mm
Min. Sheet Size Y : 280 mm
Largest Print Format (X) : 540 mm
Largest Print Format (Y) : 760 mm
Technical data can vary according to job, consumables and possible other factors
Fray DIE Cutter ABA Adam Baumüller G100
Year ca. 1972 - Serial-No. 5515329002
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
En9qru3vq
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can
----recently fully refurbished by BOBST ---- ,
Fqnovg8ha
Computer touch screen for forwarding band control; temperature control,
Pull lay operator side
Non-stop on feeder ,
Automatic Non-stop with carpet in delivery ,
• No. 3 shafts for pushing forward the bands
• Evaquation device for metal band with brush system
• Elevated 410 mm
Pivoting joggers for sample band removal
Standard equipment for controlling no. 6 bands
Band brake detection with 16 sensors
Pivoting joggers forsheet control
...
/ will be custom made / configuration of machine shown on pictures: / - max. book length: 120 mm / - max. book height: 245 mm / - max. book thickness: 7 mm / - cutting knives: 3 / (other number is possible after consultation)
Bisuurjoi8
Black Model
Cleaned & Checked
Die-Cutting Output Maximum : 4.600 Sheets / Hour
Length : 3.500 mm
Height : 1.850 mm
Width : 2.000 mm
Max. Sheet Size X : 560 mm
Max. Sheet Size Y : 770 mm
Blcyvkkf3m
Min. Sheet Size X : 210 mm
Min. Sheet Size Y : 280 mm
Largest Print Format (X) : 540 mm
Largest Print Format (Y) : 760 mm
Technical data can vary according to job, consumables and possible other factors
pneumatic punching of window profiles
Obzffbyh
Stroke 20 mm
Size max.: 760 X 1060 mm
Size min.: 350 X 400 mm
Cutting Die: 770 X 1070 mm
Die Cutting Size:
with gripper margin max:: 746 X 1060 mm
Adjustable Platen
pressure max.: 260 tons
Production Speed: 8000 s/h
Equipment: 22" Color Touch Screen
System managed by BOBST microprocessor
HelpLine plus Centerline system for quick
job changeover
electronic sheet travel control
Adjustable centering at stripping Station
4 induvidually adjustable front lay...
THE FUTURE IS HERE! AI DIE CUTTING AT IT´S FINEST!
VD3350 - AI Digital Label Die-Cutter
Minimum - Maximum Web Width: 100 mm - 350 mm
Cutting Media Width: 10 mm - 330 mm
Cutting Speed (One Station): 9 Meters per Minute
Cutting Precision: 0,1 mm by duplication
Cutter comes with:
4 Cutting Head
4 Slitter Unit
BST Web Guide
Lamination
Bvs908x0
Waste Removal
Lower Rewinder
THIS A NEW SYSTEM.
INSTALLATION AND 1 YEAR WARRANTY ARE INCLUDED IN THE PRICE.
THE LABEL DIE CUTTER HAS B...
126 x 92 cm 3 x Foil Pulls, 16 heating zones, Temperature 50º to 160º, Autoplaten concept, Quick-lock system in cutting chase, 2 Frame and Chase, 1 Stripping make ready, Non-stop feeder, Non-stop delivery, Hot-Foil System, Stripping, Elevated.
...in complete refurbishment process....
Nfqsd
Web width 225 mm
Roll diameter 500 mm
Materia thickness 18-110 mkm
Cutting speed: up to 210 cycles per min
Included:
Bplnhhvz3i
Embossing station ( «Orange peel» )
Double punching tool diam. 95,5 mm
Automatic die cutting machine Heidelberg Cylinder SB 54 × 77
The most wanted machine on the market, end of production years.
In gray color.
The machine has been completely renovated in the „gold” standard, which means the highest standard of service.
Super condition!
Format 540x770mm
The machine is professionally prepared for die-cutting.
Full automatic, smooth speed control, central lubrication, safety guards.
The set includes two frames, spare elements, sheet metal per cylinder, carriages, a l...
I sell roller die cutter, it works perfectly, demonstration video can be shown. In good condition and electrical part in very good condition.
O7ynx
Working width 1400 mm. Approximate weight of the whole set 400kg. Includes two 1400x1800 tables with idler rollers to facilitate the movement of dies. Minimum separation of rollers 0 and maximum 60mm, suitable for cutting cardboard boxes, textile material, plastic containers. . . Operation in both directions, activation button for each direction.
Up...
PK0604 Digital Cutter
Nzqkj
Cutting Area:
600 mm x 400 mm
Basic Features:
High precision Frame
Vacuum Pump
Electric Motors
Auto Feeder
Control Software GUI
Tools:
Kiss Cut Tool - Label Cutting, Vinyl Cutting
Universal Cutting Tool - Drag Cutting Knife used for Cardboard. Vinyl
Creasing Tool for Box Production
CCD Camera for increased Cutting precision
ONE YEAR WARRANTY AND INSTALLATION ARE INCLUDED IN THE PRICE.
IN WARRANTY ARE NOT INCLUDED CONSUMABLES AND WEAR PARTS.
There are two LIG ZSM 90 available, working width: 900mm, opening width: 900mm, opening height: 150mm, table dimensions: 1140x1150mm, working height: 800mm, length: 2700mm, width: 1140mm, height: 1525mm, weight: 800kg, year of construction machine 1/ 2: 1969/ 1984.
Pvlzea
The bar automat is fully functional.
It can be used as a spare machine or as a spare parts dispenser.
Bqzptjusho
Technical data are in the data sheet.
Immediately available.
in working condition die cutting machine.
Ymm8o
size 61x86
Cutting area approximately 2500x1550mm, but with auto feed its possible to cut longer material. Total size machine: 3650x2620mm.
Cuts and mills in most materials like vinyl, papper, dibond, wood, forex, reboard, plastic.
Camerareading of cutmarks from digitalprinter. Compatible with most rip-programs. We use Caldera.
Milling tool, cuting tool, scoring tool, V-cut tool.
Adjustable vacuum zones.
O0v8z
Practical material collector included.
The machine is in use in Stockholm, Sweden daily.
IT IS A SELDOM TECHNICAL SOLUTION TO PROCESS LARGE FORMAT LABLES ON A FULL AUTOMATIC DIE CUTTING SYSTEM. THE SYSTE ALLOWS TO PROCESS LABLES WITH A WIDTH UP TO 850 MM.
A machine control including the servo drive system, an HMI (Human Machine Interface) with LCO monitor and touchscreen, local I/Os for the individual sections as well all the necessary control modules for controlling and operating the units.
Ys3iew
Web width: 400mm - 850mm
Theoretical web speed: up to 150min
Production speed depend...
Iberica JR-105 F die cutter with stripping, equipped with Varioplan System, automatic feeder, feeding table, 2 side lays pushing and pulling system, 4 front lays, stripping unit with chases and tools, non stop delivery, 2 die holder chases, 2 cutting plates
Brjvbpevpw
Heidelberg Cylinder 56x82 for sale
Machine type: Die Cutting
Manufacturer: HEIDELBERG
Model: SB
Max size: 56 x 82
Xvg2s
Available immediately!
Serlem CFB rotary die-cutting press
The press is an offline machine, totally independent, designed for the die-cutting of labels of various shapes and thickness. From printed reel, it can cut materials such as OPP, PVC or paper.
Based on the electric shaft, all the units are driven independently and synchronised.
Brczxa0jxy
The cutting system is based on the rotative principle using a magnetic cylinder, equipped with a flexible die, and a very hard cylindrical counterpart. The machine is very ...
max. size 26 x 38 cm
age 1960
Bdzhohgl3n
1 closing frame
ink unit
dry sprayer
Delivery time: immediately ex stock
ML-1400 NXL die cutter
The machine is brand new.
It is the heaviest die cutter in this format.
Format: 1400 × 1000 mm
Bjp982yuuz
Weight: 6500 kg
380 V power supply
Engine: 5.5 kW
Working speed 15 +/- 2 cycles / min
Equipment:
– electromagnetic clutch and brake
– quick assembly frame
– 3 modes of operation: continuous, with time delay, manual
– central lubrication
– additional safety covers
– service tools and instructions with CE documentation.
The machine is available „immediately”
We provide 1...
Rotary Die Cutter
Piemonte Meccanica 1327
size 1300x2700
Nj0qp
Vacuum feeder
N. 2 bottom flexo printing units
beater stacker
