Used Walter Td 500 for sale (66)

Condition: excellent (used), CATALOG NUMBER 7847 TECHNICAL DATA - Min. width of center prism after cutting: 70mm - Minimum length of cut log: 1300mm - Maximum diameter of cut log: 350mm - Shaft diameter: 70mm - Circular saw blade diameter: 500mm - 2 feed speeds + forward/reverse + with frequency inverter - Lower spindle drive motor power: 18.5kW - Upper spindle drive motor power: 15kW - Max. number of saw blades per upper and lower spindle: 4 pcs each - Feed drive motor power: approx. 1.1kW - Track length: 4450mm - Extraction port diameter: 2x200mm - 3 rows of anti-kickback fingers in front of saw blades - 1 row of anti-kickback fingers behind saw blades - Dimensions (L/W/H): 6010x1500x2000mm - Weight: approx. 1250kg ADVANTAGES – Made in Poland, brand: WALTER – DTR technical documentation – Used machine, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Gsdpfx Ajx Hhxhjg Deca Net price calculated at exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: good (used), min. width of the middle prism after cutting 55mm minimum length of the cut shaft 1270mm maximum diameter of the cut shaft 350mm Gedpfxjwmg Saj Ag Doca shaft diameter 60mm diameter of the circular saw 500mm smooth regulation of the feed speed on the inverter power of the lower spindle drive motor 45kW power of the upper spindle drive motor 37kW power of the feed drive motor 1.50kW

Condition: excellent (used), CATALOG NUMBER 7846 TECHNICAL DATA - minimum width of central prism after cutting: 85 mm - minimum length of cut log: 1300 mm - maximum diameter of cut log: 350 mm - shaft diameter: 70 mm - circular saw blade diameter: 500 mm - maximum number of circular saw blades on upper and lower spindle: 4 pcs each - 2 feed speeds + forward/reverse + inverter control - drive motor power (lower spindle): 22.5 kW - drive motor power (upper spindle): 18.5 kW - feed drive motor power: 1.1 kW - track length: 4450 mm - extraction outlet diameter: 3 x 200 mm - 3 rows of detents - dimensions (L/W/H): 6040x1500x1850 mm - weight approx. 1250 kg ADVANTAGES – Made in Poland, WALTER brand – Complete operating documentation (DTR) – Used machine, in very good condition Net price: PLN 36,900 Net price: EUR 8,790 Gcodpfx Agox Hhw Rs Doa Net price calculated at 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7848 TECHNICAL DATA - Minimum width of the central prism after cutting: 70 mm - Minimum length of the cut log: 1300 mm - Maximum diameter of the cut log: 350 mm - Shaft diameter: 70 mm - Circular saw blade diameter: 500 mm - 2 feed speed options + forward/reverse + inverter control Gedpfx Agex E Shwj Djca - Maximum number of saw blades on the upper and lower spindle: 4 pcs each - Lower spindle drive motor power: 22 kW - Upper spindle drive motor power: 18.5 kW - Feed drive motor power: 1.5 kW - Track length: 4450 mm - Additional track extension: 3000 mm - Overall dimension of the additional extension: 3700 x 520 x 950 mm - Extraction outlet diameter: 3 x 200 mm - 3 rows of pawls before the blades - 1 row of pawls after the blades - Dimensions (L/W/H): 6010 x 1500 x 2000 mm - Weight: approx. 1400 kg ADVANTAGES - Polish manufacture, WALTER brand - Additional 3000 mm track extension - DTR documentation – used machine, very good condition Net price: 37,900 PLN Net price: 9,020 EUR based on the exchange rate of 4.2 EUR (Prices may vary with significant fluctuations)

Year of construction: 2014, condition: like new (used), WALTER TD500 KBA Sawmill - user manual - CE certificate – after technical review - very good condition – year of manufacture 2014 - feeding table standard 3m + 3m additionally = 6m TECHNICAL PARAMETERS: Gcsdpfjmv Ekyex Ag Doa main engine 22 kW and 30 kW length of the feeding table 6000 mm maximum log diameter 350 mm minimum log diameter 60 mm feed adjustable on the inverter feed speed range 0 – 25 m/min feed motor 1.5 kW two rows of pawls disc diameter 500 mm spindle diameter 70 mm spindle support sawdust collection conveyor three pickup rollers spigot diameter 2 x 200 mm dimensions L/W/H 300 x 245 x 180 cm weight ~ 3000 kg

Condition: excellent (used), Year of construction: 2009, I sell the multirip saw of polish production Walter TD-500. Year 2009. Suitable for cutting round wooden logs with 2 Spindles. Gsdewini Eepfx Ag Deca Cutting diameter max. 350mm. Motors 30 + 22 KW. Diameter of main saw blade max. 500mm. Feed speed controlled by variator up to 10m/min. Blades and adjusting rings included. The machine is in stock in Kežmarok, Slovakia. Available immediately.

Condition: good (used), Year of construction: 2011, Saws sliding table saw WALTER FWR 500/2 - Polish production - DTR, CE - year of production 2011 TECHNICAL PARAMETERS: - the minimum length of the material after formatting is 800 mm - the maximum length of the material after formatting 1600 mm - maximum material width 480 mm Gsdpfx Ageh Dwmlo Doca - maximum material thickness 145 mm - disc diameter 500 mm - feed smoothly adjustable 0-20 m / min - main engine power 2 x 5.2 kW - 1.5 kW feed motor power Machine dimensions: 340x230x180 weight 2500 kg

Condition: excellent (used), Year of construction: 2012, WALTER WD 250/350 30 and 37 kW shaft multisaw Gjdpfomv Elpjx Ag Djca – Polish production – year of manufacture 2012 – DTR and CE TECHNICAL PARAMETERS: cutting height 170 mm cutting width 350 mm spindle diameter 2 x 70 mm diameter of circular saw blades 300 mm spindle motor 30 kW and 37 kW feed motor 1.5 kW seven lower pulling rollers two upper toothed pulling shafts length of the feeding table 3000 mm spigot diameter belt collecting waste from under the machine 2 x 200 mm dimensions (length / width / height) 320 / 200 / 200 cm weight 2000 kg

Condition: excellent (used), Year of construction: 2015, CNC tool grinding machine Walter Helitronic Power FH, with pallet loader (cylindrical), 8-position disc changer, electrostatic fume extractor, fire extinguishing system, oil supply pump, software Walter-Window-Mode and Toolstudio. Software packages: 001, 002, 003, 016, 017, 026, 090, 091, 098, 099, 032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard. Equipped with hydraulic interface (preparation for steady rest - Lynette). Gcjdpox E Dfbofx Ag Dja The grinding spindle (single spindle) is direct-drive and features an oil cooler. The hollow-shaft motor for the A-axis has a speed range of 0–750 rpm. Axes C, X, Z, and A were overhauled in 2022.

Condition: ready for operation (used), Panning machine, Coating pan machine,Pralines and Drages, Used Machine Gcodpfx Agew I Sbbe Dsa Manufacturer: Walter Brucks Type: I Overall dimensions: 1200 x 1380 x 1800 mm Weight: 280 kg Electrical data: 400 V, 3 A Pan size: 1200 mm Ø x 650 mm Pan opening: 740 mm Ø Capacity / mixing: approx. 150 kg

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 2065-6183 FH, total height: 2,828 mm, total length: 2,930 mm, total width: 3,615 mm, workpiece weight (max.): 50 kg, spindle speed (max.): 10,500 rpm, feed length X-axis: 470 mm, feed length Y-axis: 330 mm, feed length Z-axis: 750 mm, type of input current: AC, grinding wheel diameter: 150 mm, overall weight: 6,550 kg, grinding length: 400 mm, rotational speed (max.): 9,500 rpm, grinding spindle speed: 10,000 rpm, pivoting range: 200 °, travel distance X-axis: 460 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 660 mm, grinding spindle motor power: 11,500 W, power: 11.5 kW (15.64 HP), workpiece diameter (max.): 320 mm, input current: 25 A, grinding diameter: 240 mm, input frequency: 50 Hz, disc diameter: 200 mm, input voltage: 400 V, space requirement width: 3,615 mm, space requirement length: 3,850 mm, space requirement height: 2,828 mm, year of last overhaul: 2022, Equipment: rotational speed infinitely variable, CNC tool grinding machine Walter Helitronic Power FH, with cylindrical pallet loader, with 8-position wheel changer, with electrostatic mist collector, with fire extinguishing system, with oil supply pump, Walter Window Mode and Toolstudio software, Software Packages: 001,002,003,016,017,026,090,091,098,099,032, Helicone, Helidrill, Heliflute, NC-Mode, Power-IMS, Toolstudio_Standard, prepared for hydraulic unit (steadies). Gcodpex D Tm Aefx Ag Dsa The grinding spindle (single spindle) is directly driven and equipped with an oil cooler. The hollow-shaft motor on the A-axis operates at 0-750 rpm. The C, X, Z, and A axes were overhauled in 2022. Test grinding is possible.

Condition: used, Double-column hydraulic press RASTER ZEULENRODA (WALTER) Type WUP-S 60 Mach. No. 707, built in 1994 Pressure capacity 60 tons Column width 1090 mm Side clearance 275 mm Ram surface 890 x 540 mm Table surface 990 x 540 mm Max. ram stroke 300 mm Installation height 390 mm Table height above floor 900 mm Hydraulic operating pressure 250 bar Rapid downward speed 47 mm/s Rapid upward speed 75 mm/s Working speed 15 mm/s Return speed 37 mm/s Motor power 15 kW (2 x 7.5 kW) Power supply 400 volts, 50 Hz, 15.85 kW - SICK light barrier, type LVS 600 - Manually adjustable limit switch cams for stroke limitation - Press force adjustment via handwheel - Continuous press force holding time adjustment - Two-hand operation on the machine - Additional ram plate Guided by two lateral guide rods, Ø 50 mm - Table top with 18 mm T-slots, slot spacing 185 mm - Table top through hole Ø 100 with insert reduction to Ø 30 mm - Ram plate with 40 mm bore and clamping screw Gcodpfxev Srfdj Ag Doa - Electrical cabinet on the side of the machine stand - 3 monitored safety valves for the hydraulic system - Accident prevention regulations for manual insertion work - Electrical circuit diagram Space requirement L x W x H 1900 x 1350 x 2570 mm Weight 3.1 tons Good condition

Condition: used, Year of construction: 1996, functionality: fully functional, spindle speed (min.): 10,000 rpm, power: 12 kW (16.32 HP), warranty duration: 3 months, Our machine is well maintained and fully functional. Installation and Training will be provided by our company. The machine has a 3-year warranty after installation. Please contact us for price and details. Gjdpfxowiztqe Ag Dsca

Condition: used, Year of construction: 2020, functionality: fully functional, cutting height (max.): 150 mm, saw blade diameter: 425 mm, cutting width (max.): 600 mm, chain width: 600 mm, type of input current: three-phase, input voltage: 400 V, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm Gcedpfx Agsx Dkyyj Dsa - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: used, Year of construction: 1975, functionality: fully functional, load capacity: 40,000 kg, Equipment: foot remote control, Container Rotator 40 t – Used for Sale Year of manufacture: 1975 Load capacity: 40,000 kg (40 t) Condition: Good mechanical condition, regularly maintained Modernization: Completely retrofitted with modern drive technology Technical Description The offered container rotator is suitable for the safe rotation and positioning of pressure vessels, apparatus, tanks, and large welded assemblies up to a total weight of 40 tonnes. The unit has been fully modernized and equipped with the following technology: Gcsdpfx Agox Dbifj Dsa * New electric motor (industrial grade) * Frequency inverter control (VFD) for regulation: - Infinitely variable rotation speed - Smooth start/stop operation - Fast and safe change of rotational direction - Optimized energy efficiency and enhanced operational safety * Mechanicals: robust steel frame construction, large support and running surfaces Suitable for round components, containers, boilers, cylinders, and welded structures Advantages - Very robust mechanically, designed for continuous operation - With new motor/VFD technology, technically up to date - Easy operation and precise speed control - Ideal for welding shops, apparatus construction, and pressure vessel manufacturing Availability Immediately available Inspection possible by arrangement

Condition: good (used), Year of construction: 1994, functionality: fully functional, Walther trowal CD600 - 380V - Year of manufacture: 1994 - Weight: approx. 1,140 kg - Dimensions (LxWxH): 165x248x155 cm - Very well-maintained deburring machine Gcodjuykchjpfx Ag Dea - No control panel included and no pneumatic cylinder for lid opening

Condition: good (used), Execution : . - Clamping surface D = 400 mm Gcodpfx Agjx Au Tzj Doa - Overall height 196 mm - . - 3-jaw chuck TOS , D = 250 mm , very good condition .

Condition: refurbished (used), End mill, flute cutters, Corner milling cutter Make Walter type prototype P 31 23017-20 shank diameter 20 mm cutting diameter approx.19 mm cutting length 38 mm Gcodpeiuh E Iofx Ag Dsa freshly ground and coated Material HSS Co

Condition: excellent (used), Feeding table 6 m stepless saw spacing adjustment, variable feed speed, Gcjdpfx Asxz Umxjg Dsa 2x long-body motors, each 3.5 kW. Maximum workpiece width: 700 mm Maximum cutting width: 460 mm Maximum cutting height: 140 mm Minimum workpiece width: 70 mm

Condition: good (used), Internal article no.: 24021 Boring head / fine boring head Gcjdpfstr A D Rjx Ag Dea Mounting: HSK-A63 Manufacturer: Walter GHM Designation: B4030 G. N6 / 070-090.Z1 Diameter: 70 - 90.5mm

Condition: used, Year of construction: 2017, functionality: unexamined, machine/vehicle number: 164543A01, Walter Maschinenbau GmbH bucket washing system – a robust industrial unit designed for the automated cleaning of mixing and transport buckets. The system operates with high-performance high-pressure nozzles and rotating spray heads, effectively removing even stubborn concrete and material residues. It is built for continuous operation, features a stable steel construction, and can – depending on configuration – use both fresh and recycled water. Ideal for batching plants and facilities with high cleaning demands. Gjdpfx Agsxxpp Ae Dsca Machine is used, untested, and sold without warranty. No returns.

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, total height: 245 mm, total length: 211 mm, total width: 212 mm, spindle speed (max.): 5,000 rpm, feed length X-axis: 650 mm, feed length Y-axis: 350 mm, feed length Z-axis: 720 mm, grinding wheel diameter: 250 mm, overall weight: 5,000 kg, Machine has only run with oil cooling, machine is equipped with dressing roller, measuring probe, pneumatic workpiece clamping, -- New linear guides and control conversion in 2014 Gcodpfjug H R Sex Ag Dja

Condition: used, Year of construction: 2009, Technical details: basket dimensions: 1160 x 600 x 500 mm heating capacity: 4 kW rated capacity: 16 kW rated current: 400V / 50/60 Hz A heating capacity: 4 kW temperature range: 0 - 60 °C weight of the machine ca.: 0,308 to dimensions L x W x H: 1,5 x 1,0 x 0,95 m Industrial Washing Plant The ultrasonic washing system (bath) is composed of external generator for two inserts. Type MW 2000 GT with 25 kHz sound power 2x2000 Watt with 9 levels adjustable continuous/pulse operation ultrasonic time adjustable Gcedpfx Aeu Nu Iyjg Dsa The housing, the insert basket and the cover are made of stainless steel. The washing unit stands on a lower tub. Inner dimensions: L:1160 x W:600 x D:500mm (to drain 410mm) Protection class IP23 *

Condition: like new (used), Year of construction: 2020, For sale: Walter line, year 2021, has cut only 100m3 – like new. The diagram mistakenly shows sawmill 630; it is actually KBA 500. The rest is correct. Maximum log diameter 350mm, maximum length 4000mm. Price new: 930,000. POSSIBLE exchange of KBA 500 sawmill for larger KBA 630 with rotation, 30/37 kW. Output: 60-70m3 per shift, easily handles two log truck loads – very fast return on investment, buy and start earning immediately, don’t wait! Gsdpfx Aowyl Dbsg Doca

Condition: excellent (used), Carbide saw grinder with automatic loading system Walter model Woodtronic NC4 loader Gcodpfx Asvlgmiog Dsa