Condition: ready for operation (used), Year of construction: 2007, operating hours: 72,000 h, functionality: fully functional, clamping force: 4,200 kN, screw diameter: 100 mm, displacement volume: 2,827 cm³, Clamping unit: Clamping force 4200 kN Mould opening force, max. 250 kN Travel force movable platen opening 124 kN Travel force movable platen closing 102 kN Size of mould platens (h x v) 1270 x 1200 mm Distance between tie bars (h x v) 800 x 800 mm Mould opening stroke 1020 mm Mould height min 380 mm Max. daylight 1400 mm Hydraulic ejector - stroke 250 mm Ejector force 95 kN Injection unit: Screw diameter 100 mm Iaedpfezd Smbjx Aqusu Ls/D ratio 18 Injection pressure 1490 bar Stroke volume 2827 ccm Shot weight (PS) 2573 gr. Injection rate 746 ccm/s Screw speed 195 1/min Plasticising rate max. 165 g/s Nozzle pressure 129 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 44 kW Adjustable barrel heating zones 7 Reservoir capacity 1075 ltr. Dimensions and weights: Dimensions of the machine ca. 7,50 x 2,60 x 2,50 m Total machine weight 23500 kg Max. mould weight 6700 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR 150 X: 900 mm, Servo Y: 900/900 mm, Servo Z: 2500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve on movable plate - 1 x core pull on movable plate - 6 x Hotunner controller - Accumulator - Robot inteface according to Euromap 67

Condition: used, Year of construction: 2000, operating hours: 71,316 h, functionality: fully functional, machine/vehicle number: 39027, clamping force: 220 kN, Please refer to the photos and video for the condition and contents of the offer. The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. Ijdpsy D Saqsfx Aqujau The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 7143-1001, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 1,995 bar, injection weight: 94 g, opening stroke: 400 mm, installation height: 210 mm, total length: 4,000 mm, total width: 1,400 mm, total height: 2,100 mm, overall weight: 3,400 kg, pump power: 15 W, Please refer to the photos and video for the condition and contents of the offer. Iaodpfx Aqox Spw Aeusu The equipment is currently dismantled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. A net invoice can be issued for foreign customers, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to view our additional offers. The mentioned company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Deviations from the technical data and errors in the article description may occur and are reserved.

Condition: ready for operation (used), Year of construction: 2007, operating hours: 70,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 105 mm, displacement volume: 4,546 cm³, Clamping unit: Clamping force 8000 kN Iaedpfozd Er Rjx Aquou Mould opening force, max. 560 kN Travel force movable platen opening 153 kN Travel force movable platen closing 117 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 105 mm Ls/D ratio 23 Injection pressure 1778 bar Stroke volume 4546 ccm Shot weight (PS) 4137 gr. Injection rate 805 ccm/s Screw speed 121 1/min Plasticising rate max. 144 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 110 kW Installed heating capacity 57 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 45000 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads - 8-fold water distributer - Krauss Maffei Robot LR300 X: 1200 mm, Servo Y: 1000/1000 mm, Servo Z: 3500 mm, Servo C: 0-90°, pneumatic Additional Options: - 1 x air valve - 2 x core pulls on movable plate - Accumulator - 8 x hot runner controller - Robot interface according to Euromap 67

Year of construction: 2011, condition: ready for operation (used), A virtually new and almost fully equipped Arburg vertical injection molding machine from a laboratory is available, where its plasticizing unit was never used. Clamping force: 500kN, opening force: 30kN, opening stroke: 250mm, ejector force: 30kN, ejector stroke: 70mm, screw diameter: 25mm/30mm/35mm, nozzle contact force: 50kN, nozzle retraction stroke: 210mm, heating capacity: 9kW, heating zones: 5, hopper volume: 25l, technology level: T2, rotary table diameter: 900mm. Machine dimensions X/Y/Z: approx. 3400mm/2050mm/3500mm, weight: approx. 4200kg, operating hours: 9201h, machine cycles: approx. 120k. The machine was used exclusively for composite materials such as carbon fiber and Kevlar. Documentation available. An on-site inspection is possible. Ijdozd Ehxjpfx Aqueau

Condition: ready for operation (used), Year of construction: 2006, operating hours: 50,000 h, functionality: fully functional, clamping force: 8,000 kN, screw diameter: 95 mm, displacement volume: 3,367 cm³, Clamping force 8000 kN Mould opening force, max. 560 kN Travel force movable platen opening 89 kN Travel force movable platen closing 92 kN Size of mould platens (h x v) 1600 x 1550 mm Distance between tie bars (h x v) 1120 x 1000 mm Mould opening stroke 1600 mm Mould height min/max 500/1100 mm Max. daylight 2100 mm Hydraulic ejector - stroke 300 mm Ejector force 200/100 kN Injection unit: Screw diameter 95 mm Ls/D ratio 23 Injection pressure 1795 bar Stroke volume 3367 ccm Shot weight (PS) 3064 gr. Injection rate 690 ccm/s Screw speed 116 1/min Plasticising rate max. 104 g/s Nozzle pressure 166 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 90 kW Installed heating capacity 53 kW Adjustable barrel heating zones 7 Oil Reservoir capacity 1500 ltr. Dimensions and weights: Dimensions of the machine ca. 11,00 x 3,00 x 2,60 m Total machine weight 44500 kg Max. mould weight 12200 kg Accessories: - Anti vibration pads Iaodoymn Nfepfx Aqusu Additional Options: - 1 x air valve - tiebar pull system - 3 x core pulls on movable plate - 2 x core pulls on fix plate - 20 x hot runner controller - Robot interface according to Euromap 67

Condition: excellent (used), Year of construction: 2017, operating hours: 34,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, Clamping unit: Clamping force 800 kN Mould opening force, max. 55,3 kN Travel force movable platen opening 31,1 kN Travel force movable platen closing 22 kN Size of mould platens (h x v) 720 x 670 mm Distance between tie bars (h x v) 470 x 420 mm Mould opening stroke 500 mm Mould height min 250 mm Max. daylight 750 mm Hydraulic ejector - stroke 150 mm Ejector force 23 kN Injection unit: Screw diameter 40 mm Ls/D ratio 20 Injection pressure 1860 bar Stroke volume 201 ccm Shot weight (PS) 182,9 gr. Injection rate 126 ccm/s Screw speed 295 1/min Plasticising rate max. 26 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 15 kW Installed heating capacity 11 kW Adjustable barrel heating zones 5 Oil Reservoir capacity 400 ltr. Dimensions and weights: Dimensions of the machine ca. 4,50 x 2,00 x 2,20 m Total machine weight 3900 kg Max. mould weight 995 kg Accessories: - Anti vibration pads Iodpfxezd Amxs Aqujau - Anti vibration pads - 8-fold water distributer - BluePower - Krauss Maffei Robot SPX10 Additional Options: - 1 x Air valve - 1 x hydr. core pull - Robot interface according to Euromap 67 - 8 x hot runner controller

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, clamping force: 500 kN, Clamping Force: Max. 500 kN. Distance Between Tie Bars: 320 x 320 mm. Iaedoy Aybyjpfx Aqusu Opening Force | Stroke: Max. 130 kN | 350 mm. Mould Height (fixed | variable): Min. 200 mm. Platen Daylight (fixed | variable): Max. 550 mm. Mould Mounting Platens (w x h): Max. 446 x 446 mm. Weight of Movable Mould Half: Max. 180 kg. Ejector Force | Stroke: Max. 30 kN | 125 mm.

Condition: excellent (used), Year of construction: 2001, operating hours: 99,000 h, machine/vehicle number: 154855, clamping force: 1,500 kN, screw diameter: 45 mm, The machine comes from a cleanroom environment used in medical technology and is in excellent condition, both visually and technically. Thanks to the prescribed regular maintenance, it has always been carefully maintained. Iaedpfx Aezdyk Isqueu

Condition: ready for operation (used), Year of construction: 2010, operating hours: 60,159 h, clamping force: 5,000 kN, screw diameter: 90 mm, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, This 3s Krauss Maffei 500-4300 CX was manufactured in 2010. It features a clamping force of 5000 kN and a maximum shot weight of 2084 g, making it suitable for high-quality injection molding applications. With a screw diameter of 90 mm and an injection pressure of 1839 bar, this machine offers robust performance. Consider the opportunity to buy this Krauss Maffei 500-4300 CX hydraulic injection moulding machine. Contact us for further details. • Clamping unit • Tool weight: DS 3950 kg / AS 5260 kg (total 7900 kg) • Min. tool diameter: 560 mm • Opening stroke: 1170 mm • Tool installation height: min 480 mm; max – • Max plate spacing: 1650 mm • Mounting plates (H × V): 1270 × 1200 mm • Clear column spacing: H 900 mm / V 800 mm • Centering ring diameter: 200 mm • Ejector • Stroke: 250 mm • Ejection force: 95.4 kN • Retraction force: 48.6 kN • Pneumatic ejector: yes • Core pulls / controls • Core pull control: 2 (AS) + 2 (DS) • Closing nozzle: 2 hydraulic / 0 pneumatic • Process control (SPC): yes (Kistler, p=2 / t=0) • Printer interface: no / 12-port USB • Hot runner control: no • Injection unit 1 • L/D ratio: 20 • Screw diameter: 90 mm • Max. stroke volume: 2290 cm³ Isdpfx Ajyg Hz Hequoau • Max. shot weight (PS): 2084 g • Injection pressure: 1839 bar • Plasticizing rate: 185.8 g/s • Screw speed: 270 rpm • Nozzle bore: 6 mm • Pump power / Heating power: 90 kW / 44 kW • Other • Max. crane load: 10 tons • 2K-capable: no • Filter nozzle/mill: no • It is a standard fully hydraulic 2-plate clamping system with fully hydraulic screw drive and constant motor. • Operating hours: 60,159 h Additional equipment • Linear robot: KRC6-2 ARC-C • Axes: X/Y (standard), Z present

Condition: ready for operation (used), Year of construction: 2017, operating hours: 44,678 h, clamping force: 2,500 kN, This Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine was manufactured in 2017. It features a clamping force of 2500 kN and a maximum mold weight of 3430 kg. The machine includes a linear robot LRX 150 for enhanced automation. Consider the opportunity to buy this Krauss Maffei 250 - 1000 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 630 x 630 mm • Platen dimensions: 995 x 1050 mm • Mold installation height (min): 330 mm • Platen distance: 1150 mm • Max mold weight: 3430 kg total (fixed: 1715 kg / moving: 2286 kg) • Core pull control: 4 units (2 x fixed platen/FAP; 2 x moving platen/BAP) • Shut-off nozzle: 4-fold hydraulic cascade • Injection unit 1 (code 1000): • Screw diameter: 55 mm • Injection pressure: 1904 bar • Stroke volume: 523 ccm • Shot weight (PS): 476 g • Injection flow (PS): 404 g/s • Armored unit: Yes (ZE 33.00) • Printer interface: Yes Isdsyhbq Ejpfx Aqusau • Condition: Well-maintained and serviced Additional equipment • Automation: Linear robot LRX 150 with B/C axis combination (KM Linear Robot LRX 150 included) • Hot runner control: 12-fold • Cooling: 4 x HB 100

Condition: ready for operation (used), Year of construction: 2012, operating hours: 70,936 h, clamping force: 4,200 kN, screw diameter: 80 mm, This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details. • Tie bar spacing (H x V): 800 x 800 mm • Platen dimensions (H x V): 1200 x 1200 mm • Mold installation height (min): 380 mm • Opening stroke: 1020 mm • Daylight (platen distance): 1400 mm • Max. mold weight: • Fixed side (DS): 3350 kg • Moving side (AS): 4460 kg • Total listed: 6700 kg • Ejector: • Stroke: 250 mm • Force: 95 kN • Retraction force: 48 kN • Pneumatic ejector: No • Core pulls: 2 on moving side (AS) + 2 on fixed side (DS) • Shut-off nozzle: 2-fold hydraulic cascade • Injection unit 1: • Type: SP 4300 • Screw diameter: 80 mm • Injection pressure: 2205 bar • Stroke volume: 1810 ccm • Shot weight (PS): 1647 g • Injection flow (PS): 498 g/s • Plasticizing flow: 106 g/s • Screw L/D: 22.5 • Nozzle radius: 12 mm • Armored injection unit: Yes Additional equipment Ijdsyhby Hjpfx Aqueau • KM Linear robot, built in 2021 • Hot runner control, 12-zone • Mold sensors: Priamus (p=2 / t=0)

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter Ijdpey N Sqmofx Aquoau • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: ready for operation (used), Year of construction: 1997, operating hours: 111,569 h, clamping force: 10,000 kN, This Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. The system offers an optional REMAK RE-CNC 6-axis robot with a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details. • Injection unit • Screw speed: 92 rpm • Injection speed stages: • 25% → 23 mm/s • 50% → 46 mm/s • 75% → 69 mm/s • 100% → 92 mm/s • Injection measurement stroke: 200 mm forward movement actually used to inject the shot Iajdpfeywlvrjx Aqueu • Injection pressure limit: 185 bar • Hydraulic system • Pump differential pressure: 10 bar • Pressure circuits: • Main pressure: 250 bar • Injection pressure: 185 bar • Hydraulic circuit: 150 bar • Secondary pressure: 120 bar • Auxiliary pressure: 50 bar • Closing pressure drop: approx. 4–6 bar/min • Proportional valve pressure ranges: • Minimum: 50 bar • Maximum: 150 bar • Spindle speed: 92 rpm • Heating system • Number of heating zones: 9 • Cylinder heater power examples: 9100 W, 8200 W, 6200 W, 5200 W, 2400 W, 650 W, 300 W • Operating voltages recorded: 230 V, 220 V, 380 V • Temperature accuracy deviation: approx. −1 K to +2 K • Condition / maintenance relevant data • Machine alignment tolerance:

Condition: excellent (used), Year of construction: 2017, operating hours: 32,000 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 25 mm, displacement volume: 59 cm³, Clamping force 500 kN Mould opening force, max. 39 kN Iedpezdrcisfx Aqusau Travel force movable platen opening 22 kN Travel force movable platen closing 17 kN Size of mould platens (h x v) 600 x 600 mm Distance between tie bars (h x v) 370 x 370 mm Mould opening stroke 400 mm Mould height min 200 mm Max. daylight 600 mm Hydraulic ejector - stroke 100 mm Ejector force 22 kN Injection unit: Screw diameter 25 mm Ls/D ratio 26 Injection pressure 2500 bar Stroke volume 59 ccm Shot weight (PS) 54 gr. Injection rate 59 ccm/s Screw speed 365 1/min Plasticising rate max. 8,5 g/s Nozzle pressure 50 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 11 kW Installed heating capacity 8 kW Adjustable barrel heating zones 5 Reservoir capacity 180 ltr. Dimensions and weights: Dimensions of the machine ca. 3,50 x 1,40 x 2,00 m Total machine weight 3000 kg Accessories: - Anti vibration pads - 6-zones water distributer - Krauss Maffei Robot SPX10 Additional Options: - 1 x hydr. core pull on movable plate - 1 x airvalve - 6 x hotrunner controller - Robot interface according to Euromap 67

Year of construction: 2008, condition: used, overall weight: 30 kg, terms of delivery: FCA Pegnitz delivery time: on request terms of payment: 100% prior to delivery Iaodpfx Aewyfm Aequeu

Condition: excellent (used), Year of construction: 2012, clamping force: 1,000 kN, Equipment: documentation/manual, Fanuc S2000 i 100B (2012) nr. 23 Clamping force: 100 t Screw diameter: 40 mm Distance between tie bars V: 410 mm Distance between tie bars H: 460 mm Iaedpfx Ajx Uqryjqusu Type: Horizontal Drive: Electric Hours: 32426

Condition: good (used), Year of construction: 2004, functionality: fully functional, Clamping force: 1250 kN Iedpfx Aswthfuoqusau Screw diameter: 35 mm Tie bar spacing: 470 mm Shot weight: 142 g Minimum mould height: 300 mm Total weight: approx. 6,000 kg

Condition: ready for operation (used), Year of construction: 2024, operating hours: 8 h, clamping force: 100 kN, screw diameter: 18 mm, total width: 526 mm, total height: 1,692 mm, overall weight: 450 kg, product length (max.): 1,485 mm, Hydraulic injection moulding machine manufactured in 2024. This BOY XS 161 features a clamping force of 100 kN and a maximum injection pressure of 2298 bar. It includes a 18 mm screw diameter and a theoretical shot volume of 6.1 cm³. If you are looking to get high-quality injection moulding capabilities, consider the BOY XS 161 machine we have for sale. Contact us for further details. Iajdoyw I Azjpfx Aquju • Control system: Procan ALPHA 4, 15" multi-touch HMI • Injection pressure: max. 2298 bar • Theoretical shot volume: 6.1 cm3 • Distance between tie bars: 160 mm (205 mm diagonal) • Max. daylight between platen: 250 mm • Adjustable opening stroke: 150 mm • Min. mold height: 100 mm (optional 50 mm) • Hydraulic system pressure: 300 bar • Oil tank capacity: 28 liters • Installed total power: 6.1 kW • Electrical supply: 400 V 3~ N, 50/60 Hz, 12.4 A • min. machine height: 1380mm • max. machine height: 1692 mm • Footprint: 0.78 m2 • Safety guarding: Fully enclosed clamping zone with clear polycarbonate sliding safety gate and electrical interlock • Peripheral interfaces: Pneumatic and cooling water connectors on the non-operator side • Status indicators: 3-tier LED signal tower (Red/Yellow/Green) Additional equipment (accessories) • 3-liter gravity material hopper • Red 16A CEE power plug • Heavy-duty wooden transport/leveling base

Condition: used, Year of construction: 1996, I am selling an ARBURG 420C injection molding machine from 1996. The machine is fully functional, well-maintained, and has been used for light production. It features a robust hydraulic design, making it ideal for medium-sized molds. Isdpozdlwasfx Aqusau Parameters: - Clamping force: approx. 100 tons - Distance between tie bars: 420 x 420 mm - Screw diameter: approx. 35-40 mm - Injection volume: 140-180 cm3 Control system: Dialogica / Selogica - Weight: approx. 3.5 tons

Condition: good (used), Year of construction: 2014, Clamping force: 50 t Screw diameter: 30 mm Distance between tie bars V: 320 mm Distance between tie bars H: 320 mm Shot volume: 85 cm3 Shot weight: 77 g Injection pressure: 2000 bar Type: Horizontal Iedpfxszcaipj Aqusau Drive: Hydraulic

Condition: ready for operation (used), Year of construction: 2010, operating hours: 23,905 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, displacement volume: 135 cm³, injection pressure: 2,221 bar, opening stroke: 335 mm, total length: 2,420 mm, total width: 1,700 mm, total height: 3,100 mm, overall weight: 6,700 kg, Equipment: documentation/manual, For sale: Well-maintained injection moulding machine ENGEL INSERT 200V/60 with only 23,905 operating hours. The machine was used exclusively for sampling purposes. Inspection under power possible at any time! Ijdpfx Aqey Iwlaeueau Technical specifications as per the pictures! Machine is immediately available!

Condition: ready for operation (used), Year of construction: 2011, clamping force: 4,200 kN, screw diameter: 80 mm, injection weight: 1,464 g, total height: 2,500 mm, overall weight: 25,500 kg, controller manufacturer: KRAUSS MAFFEI, controller model: MC5, product length (max.): 7,300 mm, This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine. • Electrical data: • Power supply: 400 V / 3N~ / 50 Hz • Installed heating power: 36 kW • Rated pump motor power: 75 kW • Number of barrel heating zones: 7 • Performance and control: • Dry cycles (Euromap 6): 1,200 cycles/h • Control system/version: MC5 3.3 • Machine color: grey / white / blue • Clamping unit: • Mold opening force: 249.6 kN • Distance between tie bars: 800 × 800 mm • Moving platen force (open/close): 124.7 / 102.4 kN • Platen dimensions: 1270 × 1200 mm Iajdjydnp Hepfx Aqusu • Mold opening stroke: 1020 mm • Minimum mold height: 380 mm • Ejector stroke: 250 mm • Platen opening stroke: 1400 mm • Injection unit: • Nozzle tip radius: 15 mm • Nozzle orifice diameter: 6 mm • Injection pressure: 1856 bar • Injection volume: 1608 cm³ • Injection rate: 478 cm³/s

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 80400008, clamping force: 2,800 kN, screw diameter: 45 mm, injection weight: 320 g, ejector stroke: 200 mm, opening stroke: 675 mm, Loading the machine is possible for an additional charge of €500! TECHNICAL DETAILS Clamping force: 2,800 kN Number of components: 1 Width of clamping plate: 950 mm Height of clamping plate: 950 mm Free distance between bars, horizontal: 630 mm Free distance between bars, vertical: 630 mm Diameter of centering ring: 160 mm Minimum installation height: 330 mm Maximum installation height: 710 mm Maximum opening stroke: 675 mm Maximum ejector stroke: 200 mm Maximum tool weight: 3,700 kg Maximum tool weight, moving side: 2,500 kg Iajdjzdiyxopfx Aquou MACHINE DETAILS Thread: M20 Screw diameter: EE1: 45 mm Maximum shot weight PS: EE1: 320 g Unit arrangement: EE1: horizontal EQUIPMENT Core pull, 2-fold Cascade, 6-fold Robot Note: The operating hours can be found in the last image.

Condition: excellent (used), Year of construction: 2011, 2x ARBURG A 170 S 180-30 Trennebene (S&P 3798) Manufacture year: 2011 Operating hours: 38,396 Stunden Screw: 15 mm Injection pressure: 2200 bar Stroke volume: 10,6 cm³ Clamping Force: 18 t Tie bar distance: 170 x 170 mm Mould installation height min.: 150 mm Plate distance max.: 350 mm Dimensions: 2600 x 1400 x 2000 mm Eeight: 1720 kg Connected load: 11 + 4 = 15 kW price: on request Option parting line, hotrunner 6x, Robot Interface EM67, Interface Colorizing, corepuller, crane 350 kg Price: on request contact: Mr. Ralf Schulz Iodpfezdf S Ssx Aquoau