Used Machines with a clamping force of 1000 - 4999 kN for sale (459)

Condition: good (used), Year of construction: 2021, operating hours: 2,109 h, Functionality: limited functionality, 160t clamp tonnage, 35mm main barrel with 150ccm shot volume, 15mm secondary barrel with 15ccm shot volume, 16 hot runner zones, 4+4 shut off nozzle valves, servo driven swivel unit on moving half. Comes with Eunil Magazine Loader and Viper 12-RC300 robot Notes - 1. Two machines available for sale 2. Price mentioned is Ex works. Any expenditures incurred for packaging and logistics would be charged extra to the buyer. Acknowledgement and disclaimer Cgelievmuliomcbljt The goods the subject of this transaction were acquired by the seller for its own purposes and are no longer required. The sale of the goods is not part of the seller’s ordinary business and is part of a one-off sale to dispose excess spare parts that are no longer required and equipment that is surplus to our current requirements. The seller does not make any representation as to the purpose for which the goods might be utilised or their fitness for any particular purpose. The seller is not aware of any defect or faults in the goods (other than as may have been disclosed to the buyer). The buyer accepts the goods on the basis of their knowledge of any defects disclosed and the goods are otherwise provided ‘as is’ and without any warranty or representation as to their condition, except as expressly stated otherwise. No refunds will be offered if the goods are not suitable for your particular intended purpose, unless an express representation was made to say that the goods would be suitable for that specific purpose. Nothing in these terms is intended to exclude or limit any remedy that may be available to a consumer under the Australian Consumer Law to the extent that it applies to a particular sale of any goods.

Condition: ready for operation (used), Year of construction: 2001, operating hours: 74,930 h, General Data Measurements width 1600 mm Measurements depth 4350 mm Measurements height 1800 mm Machine weight 4500 kg Injection Unit Screw diameter 40 mm Shot weight 166 g (PS) Injection pressure 2120 bar Clamping Unit Clamping force 1300 kN Coliowhgu Romcblogt Opening stroke 500 mm Distance between bars 420 x 420 mm Mould height min 250 mm Size of mold platens 750 mm This Arburg Allrounder 420 C 1300-350 was manufactured in 2001. A robust injection moulding machine with a clamping force of 1300 kN and a screw diameter of 40 mm. It features a maximum shot weight of 166 g PS and an injection pressure of 2120 bar. Ideal for precise, large-scale production, the machine we have for sale represents a significant opportunity for efficiency. Contact us for further details regarding this injection moulding machine. Application Types Injection Moulding

Condition: good (used), Year of construction: 2014, ZHAFIR VEII 1500/300 (2014) Clamping force: 150 t Screw diameter: 36 mm Shot weight: 134 g Colisvx Ui Semcblegt Injection pressure: 2000 bar Distance between tie bars V: 470 mm Distance between tie bars H: 520 mm Shot volume: 147 cm3 Type: Horizontal Drive: Electric

Condition: excellent (used), Year of construction: 2000, operating hours: 46,000 h, Functionality: fully functional, machine/vehicle number: 180316, clamping force: 1,000 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, Fully functional plastic injection molding machine with associated documentation and diskettes. The machine operated in clean production. The machine was injection molded with LDPE material, so the tip and screw are in first-class condition. Every 2 years, the pressures were checked and confirmed by an Arburg authorized service. Cgelimcbsv N D Rajljt

Condition: excellent (used), Year of construction: 2015, ARBURG A 570 H 2000-1300 e² HIDRIVE (24.000 h) (S&P 3775) Manufacture year: 2015 Operating hours: 24,000 Stunden Screw: 55 HVF mm Injection pressure: 2380 bar Stroke volume: 570 cm³ Clamping Force: 200 t Tie bar distance: 570 x 570 mm Mould installation height min.: 250 mm Plate distance max.: 1000 mm Dimensions: 6200 x 2000 x 2200 mm Eeight: 10250 kg Connected load: 30 kW Accu, Airvalve, Sorter Unit, Corepuller, Conveyor belt, Robot Interface EM67, Cylinder heating up to 450°C, shott off nozzle, extension max. mouldheight to 750mm, price when new approx. 190.000,- Euro price: on request Cgjlimswhcnmecblot contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2007, Functionality: fully functional, 1,0 St. gebr. Spritzgießmaschine Hersteller: NETSTAL Typ: ELION800-270 Baujahr: 2007 Cgoliewf I Hiomcblet Schließkraft: 80 Tonnen Holmabstand 410 x 410 mm Einbauhöhe min. /max.: 500 mm Öffnungsweg: 350 mm Schnecken DN: 35 mm Max. Hubvolumen: 123 cm³ Spritzteilgewicht in PS: 118 g

Condition: good (used), Year of construction: 1990, Netstal 1000/445HP Closing 100 TO Scrow 40mm Cgelimcbjgi D Tholst Stroke volume 44x44 Year 1990

Condition: ready for operation (used), Year of construction: 2003, Control Unit Colimswhgqfscblsgt Brand NETSTAL Injection Unit Injection pressure 279 kN Clamping Unit Clamping force 1500 kN Opening stroke 0-450 mm Mould height min 400 mm Mould height max 700 mm Additional Equipment Equipment: PLastification D 45-22D LP A / Mould heaters: 4 x 3.3 KW/ 32 x 0.75 KW / Robot interface 12+ / Paint conveyor interface Europe interface 15 1-1 / 4 air valves 890L / 1 core puller Hydr Cooling water in the outlet opening and 2 distributors on each of 8 cooling circuits The machine was partially overhauled in 2018 This Netstal SynErgy 1500-460 Injection moulding machine was manufactured in the year 2003 in Switzerland. It is controlled by a Netstal control unit. The machine has a clamping force of 1500 kN. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2005, Engel VICTORY 500/110 Tech Tiebarless machine Platen size: 740x530mm Clamping force: 110 t Opening Stroke: 507mm Screw diameter: 40 mm Shot volume: 251 cm3 Cgslieu Euyzemcblot Type: Horizontal Drive: Hydraulic Machine is including Engel ERC robot 1 core puller 16 hotrunner zones

Condition: excellent (used), Year of construction: 2010, Arburg 470H 1000-400 e² / Hybrid machine Year of construction: 2010 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Injection pressure: 1580 bar Metering volume: 254 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 470x470 mm Size of the clamping platens: 637x637 mm Ejector: hydraulic Clamping unit: toggle lever Control system: SELOGICA touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: high-speed, energy-saving and very quiet Operating hours: h in automatic mode Air valve x 1 Control unit with hot runners x 12 Hardened injection unit - bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by a servomotor controlled by an inverter Centralized lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Dimensions Cslimcbewcnaqsljgt Weight: 5090 kg Length/width/height: 4.40x1.56x2.03 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, ARBURG A 520 H 1500-800 HIDRIVE (S&P 3763) Manufacture year: 2012 Operating hours: 37,500 Stunden Screw: 50 mm Injection pressure: 2000 bar Stroke volume: 392 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Cgolimcswhckneblet Dimensions: 5200 x 1700 x 2200 mm Eeight: 6660 kg price: 49.500,00 € contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8200 Celimcbovzc Axslegt Injection Unit Screw diameter 50 mm Clamping Unit Clamping force 2000 This DEMAG Extra 200-840 hydraulic injection moulding machine was manufactured in 2008. Ideal for precision plastic processing, it offers robust functionality and reliability. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2007, Clamping force: 150 tons Opening stroke: 500 mm Mould height: 250 mm Clamping platen daylight: 750 mm Distance between tie bars: 470 x 470 mm Mould clamping plattens (b x h) : 650 x 650 mm Ejector stroke: 175 mm Screw diameter: 40mm Cslsvl Skmjimcblogt Injection volume: 201 cm3 Shot weight: 184 g Working hours: 38.929 h Core pullers: 1x Air blast: 1x L 4900 x W 1750 x H 2100 mm, Weight 4590,-kg possible to buy with Robot APEX

Condition: excellent (used), Year of construction: 2010, Arburg 420C 1000-290 Year of manufacture: September 2010 Celimcbswcm Tvolegt Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Dosing volume: 144 cc Clamping unit: Clamping force: 100 t Type distance: 420 x 420 mm Clamping platen size: 570 x 570 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA - touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Injection unit hardened - bimetal Dimensions: Weight: 3600 kg Length/Width/Height: 4.30 x 1.63 x 2.07 m Drive: Pump/Motor: 15 kW Heating power: 6.4 kW Total power: 21.4 kW All machines offered are started by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2011, BATTENFELD TM 300/2250 UNILOG B6E ServoPower (S&P 3774) Manufacture year: 2011 Operating hours: 42,500 Stunden Screw: 65 mm Injection pressure: 2070 bar Stroke volume: 1078 cm³ Cgolowhckbeimcblst Clamping Force: 300 t Tie bar distance: 630 x 630 mm Mould installation height min.: 250 mm Plate distance max.: 1250 mm Dimensions: 7000 x 1800 x 2400 mm Eeight: 11800 kg Connected load: 37 kW Price: €32,900.00 contact: Mr. Ralf Schulz Robot Interface, 3 x corepuller, 2 x shot off nozzle, hotrunner 1-24, Airvalve

Condition: ready for operation (used), Year of construction: 2004, Clamping Unit Clamping force 1100 KN Opening stroke 600 mm Mould height max 1500 kg Size of mold platens 670x670 mm Cgjlimcswf Sndsbljt This DEMAG ERGOtech multi 110-470 hydraulic injection moulding machine was manufactured in 2004. It is a robust and reliable choice for your production needs. Consider the opportunity to buy this DEMAG ERGOtech multi 110-470 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: good (used), Year of construction: 2013, Clamping force: 150 t Screw diameter: 45 mm Shot weight: 290 g Distance between tie bars V: 470 mm Distance between tie bars H: 520 mm Cgslimcsvx Um Dsblot Min mould dimension: 335×305 mm Shot volume: 319 cm3 Type: Horizontal Drive: Electric

Condition: excellent (used), Year of construction: 2016, Arburg 570S 2200-290/100/100 / Production line with the Wittmann W823 robot / Operating hours: 20,499 h in automatic mode Year of construction: 2016 Injection unit: Screw diameter: 35 mm Injection weight: 132 g Injection pressure: 2000 bar Metering volume: 144 ccm Clamping unit: Clamping force: 220 t Distance between tie bars: 570x570 mm Size of the clamping platens: 795x795 mm Ejector: hydraulic Clamping unit: hydraulic Control system: SELOGICA touchscreen Additional equipment: 3-component injection molding machine, high speed Very good technical condition Operating hours: 20,499 h in automatic mode Euromap 67 Robot interface Air valve x 6 Hydraulic, needle core pull, controlled by a proportional valve x 4 Control unit with hot runners Hardened injection unit - bimetal Proportional valve on the injection unit - precise injection Machine with two cylinders / battery with compressed nitrogen (additional charge for fast work) Parallel movements Screw diameter in the vertical injection unit: ⌀25 mm - 45 g/hp Screw diameter in the lateral injection unit: ⌀25 mm - 45 g/hp Wittmann W823 robot Year of construction: 2015 5-axis robot: 3 axes are driven by servomotors (electric); axis C and movement A Travel in axes: X-550, Y-1400 (telescopic), Z-3500 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Cgjlijwcnkpjmcblot Purchase of the robot and conveyor belt for an additional charge Dimensions Weight: 10830 kg Length/width/height: 5.53x1.77x3.29 m All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2001, operating hours: 71,000 h, General Data Machine weight 5900 kg Cgeliswf Sm Tsmcblot Injection Unit Screw diameter 35 Clamping Unit Clamping force 1250 KN Opening stroke 600 mm This Krauss Maffei KM 125-390 C2 was manufactured in 2001. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this Krauss Maffei KM 125-390 C2 hydraulic injection moulding machine. Contact us for more information. Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2013, ZHAFIR VE360II (2013) 360 tons Clamping force: 360 tons Distance between tie bars: 820 x 820 mm Mould height : 250-860 mm Ejector stroke: 160 mm Priemer šneku: 60 mm Injection volume: 792 cm3 Shot weight: 720 g Cgelsu Dm Hqoimcblst Injection pressure: 210 bar

Condition: excellent (used), Year of construction: 2017, Ferromatik Milacron Magna T(MTs) 150-450 / production line with robot Wemo 6-5 xDesign, conveyor Wemo WCS-R and contactor housing / machine in very good technical condition. Year of manufacture: 2017 Injection unit: Screw diameter: 45 mm injection weight: 215 g Injection pressure: 1984 bar Cjlimcewcmw Usblsgt Metering volume: 226 ccm Clamping unit : clamping force: 150 t tie bar distance: 510x510 mm size of clamping platens: 740x740 mm ejector: hydraulic clamping unit: toggle lever control: B&R - touch screen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: 11,000 in automatic mode Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Hot runner control unit x 36 (for additional payment) Injection unit is wear resistant and resistant to corrosion Main machine motor - servo motor driven by inverter Central lubrication Machine with cylinder / battery with compressed nitrogen (additional charge for fast work) Robot Wemo 6-5 xDesign Year of manufacture: 2017 4-axis robot: 3 axes are driven by servo motors (electric) The safety package for robots Robot with adapter, conveyor belt Wemo WCS-R and contactor housing Purchase of the robot and conveyor belt for an additional charge Dimensions: Weight: 7500 kg Length/width/height: 6.10x1.97x2.60 m Drive: Pumps/motor: 11,5 kW Heating power: 11,3 kW Total power: 22,8 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: ready for operation (used), Year of construction: 2019, operating hours: 28,422 h, Clamping Unit Clamping force 3200 KN This Arburg SGM Allrounder 720A was manufactured in 2019. It is a hydraulic injection moulding machine, ideal for precision and efficiency in plastic processing tasks. Contact us for more information. Coliswf Smaemcblsgt Application Types Injection Moulding

Condition: excellent (used), Year of construction: 2015, Engel Victory 330/180 tech (2015), duroplast, Engel VIPER 40 linear robot Clamping force: 180 t Screw diameter: 35 mm Shot volume: 154 cm3 Type: Horizontal Drive: Hydraulic Controll CC300 Engel Viper 40 Linear Robot Engel Rotofeeder BMC50 The machine 202463 has proportional valves for the cap, injection, ejector, 3 x cores and controlled 2 hydraulic servo pumps Machine was using DUROPLAST MATERIAL Colimcbevply Njljgt Approx 30.000 hours

Condition: excellent (used), Year of construction: 2014, Boy 100E / Hybrid machine Year of construction: 2014 Injection unit: Screw diameter: 32 mm Injection weight: 92.3 g Injection pressure: 2127 bar Dosing volume: 96.5 ccm Clamping unit: Clamping force: 100 t Distance between tie bars: 430x360 mm Size of the clamping platens: 750x650 mm Ejector: hydraulic Clamping unit: hydraulic Control system: Procan Alpha 2 - touchscreen Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Coliswcmzajmcbljgt Euromap 67 Robot interface Control system with air valve Hardened spraying unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Dimensions: Weight: 3530 kg Length/width/height: 4.37x1.21x2.20 m Drive: Pump/motor: 15 kW Heating output: 7.7 kW Total output: 22.7 kW All offered machines are started by our service technicians before sale. It is possible to obtain a video of the technical tests of the selected machine or participate in live technical tests at our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2013, Control: UNILOG B6 Closing force: 4500 KN Distance between columns: 950mm x 700mm Minimum height of mold assembly: 330mm Maximum height of mold assembly: 780mm Screw diameter: 65mm Proper injection pressure: 2070 bar Maximum injection weight: 980.9 g ServoElectric injection unit Servo Packaet S0 ServoPower package S1 (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo electric (Knodler) with jet actuator, injection speed 400 mm/s (servo injection control significantly reduces electricity costs and supports precise regulation injection process) Electric ejector with a force of 60 KN and a path of 180mm Colou Hiwwoimcblogt Additional equipment: 1\. Air valve 2\. Cooling water flow regulator 3\. Digital interface for the temperature regulator (possibility of controlling six thermoregulators simultaneously) 4\. Interface for controlling the needle cutting off the nozzle in the tool 5\. Interface for controlling the external hot runner regulator 6\. Full integration for the Wittmann W8xx series robot 7\. Button for quality control Language : Polish