Used Plastic Injection for sale (6,902)

Condition: ready for operation (used), Year of construction: 2007, operating hours: 39,807 h, functionality: fully functional, machine/vehicle number: 5347, clamping force: 6,500 kN, screw diameter: 85 mm, clearance between the columns: 920 mm, column diameter: 920 mm, injection pressure: 2,000 bar, injection weight: 2,600 g, ejector force: 180 N, ejector stroke: 250 mm, opening stroke: 920 mm, total length: 8,870 mm, total width: 2,100 mm, total height: 2,550 mm, overall weight: 32,500 kg, heating capacity: 39 kW (53.03 HP), power: 75 kW (101.97 HP), input voltage: 400 V, Equipment: documentation/manual, For sale is a PLASTIC METAL UNYKA 650 injection molding machine with a clamping force of 6,500 kN (650 tons). The machine is currently in operation and therefore in functional condition. It is available immediately. Technical data: Manufacturer: PLASTIC METAL S.p.A. Dkedpfxozza Egj Aiiow Type: UNYKA 650 Year of manufacture: 2007 Clamping force: 6,500 kN (650 tons) Machine weight: approx. 32,500 kg Drive power: 75 kW Heating power: 39 kW EUROMAP: 6500H/4165 Serial number: 5347 The machine is currently still in production and can be inspected and demonstrated on-site after prior arrangement. Inspection is only possible after prior arrangement. Loading & Collection The machine can be loaded directly on-site after production ends. Loading with an overhead crane is possible. Sale without peripheral equipment. The machine is offered without peripheral equipment. Dismantling, transport, and further processing will be arranged. Availability: immediately If you are interested or would like to arrange an inspection appointment, we look forward to receiving your inquiry.

Condition: used, Injection molding machine ARBURG, Type Allrounder 320 C 600-100 Serial No. 189356, Year of manufacture 09/2002 Clamping force 60 tons Screw diameter 25 mm Dosing volume max. 49 cm3 Injection pressure max. 1570 bar Opening stroke - platen stroke max. 350 mm Platen dimensions 446 x 446 mm Tie bar spacing 320 x 320 mm Mold height min.: 200 mm Platen spacing min.: 200 mm Platen spacing max.: 550 mm Centering of fixed and moving platens 125 mm Heater power 4.9 kW Motor power hydraulic pump 15 kW Mains connection 400 Volt, 50 Hz, 19.9 kW - Machine control SELOGICA - Two controllable hydraulic circuits for core pullers - Injection unit with COLORTRONIC material hopper for automated granule feed - U-version interface Dkedpfxszqglrj Aiiow - HHG interface - Control ARBURG MULTRONICA with foil keypad and integrated display - 88790 operating hours recorded (power-on hours) - 44925 operating hours of the hydraulic pump (hydraulic on) - Control cabinet fixed to the machine - Work area protective doors at the front and rear, manually sliding with safety switches - Mobile control panel with function keys, mounted on the back of the machine Space requirement L x W 3650 x 1700 mm Height with material hopper 2200 mm Weight 3000 kg Good condition

Condition: used, Injection molding machine ARBURG, type Allrounder 221 M 350-75 Serial No. 163646, Year of manufacture 1995 Clamping force 35 tons (350 kN) Screw diameter, presumably Ø 25 mm Platen size 342 x 250 mm Mold size, max. 221 mm Mold mounting height 150 to 300 mm Column spacing 221 mm (center distance) Opening stroke - platen stroke, max. 200 mm Ejector stroke 60 mm Ejector force 27 kN Hydraulic oil tank capacity 120 liters (delivery without oil) Dkodpfxozx Etwe Aiiow Heating capacity 4 kW Motor power, hydraulic pump 7.5 kW Power supply 400 volts, 50 Hz, 12 kW - ARBURG MULTRONICA control system with foil keyboard and screen - Stainless steel granulate hopper, 50 liters, on the injection unit - Adjacent control cabinet Space requirement without transport pallet, L x W x H 2750 x 1350 x 1850 mm Transport dimensions on pallet, L x W x H 2750 x 1700 x 1900 mm Weight approx. 1300 kg Good condition

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Dkedpfx Aox Nhy Rjiisw

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Dedpfx Aiezna T Rjiokw

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 42503, clamping force: 4,000 kN, screw diameter: 70 mm, injection pressure: 1,481 bar, injection weight: 1,040 g, overall weight: 5,600 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping unit Clamping force: 4,000 kN Platen length: 1,300 mm Platen width: 1,080 mm Tool height: min. 350 mm Mold opening: max. 1,300 mm Injection unit Screw diameter: 70 mm Injection volume: 1,155 cm³ Injection weight: 1,040 g Injection pressure: 1,481 bar MACHINE DETAILS Rated power of the pump motor: 45 kW Dkodpfx Aj Afw Drsiiow Dimensions & Weight Dimensions (L x W x H): approx. 8,000 x 2,250 x 2,200 mm Machine weight: approx. 5,600 kg

Condition: repair required (used), Year of construction: 1999, operating hours: 33,400 h, functionality: limited functionality, machine/vehicle number: 70185/300/99, screw diameter: 45 mm, injection pressure: 2,038 bar, total length: 7,200 mm, total width: 2,000 mm, total height: 2,500 mm, overall weight: 22,000 kg, For sale is an ENGEL ES650/330/300 TL injection molding machine in a C-frame design. The machine is ideal for repair, modernization, or as a source of spare parts. Technical data Manufacturer: ENGEL Type: ES650/330/300 TL Year of manufacture: 1999 Machine number: 70185-300-99 Clamping force: 3,000 kN Design: C-frame 1 horizontal injection unit Screw diameter: 45 mm Injection volume: 292 ccm Injection pressure: 2,038 bar Max. injection temperature: 450 °C Min. tool mounting height: 400 mm Max. distance between mold mounting plates: 1,300 mm Ejector stroke: 200 mm 3 hydraulic core pulls Dimensions and weight Length: 7.20 m Width: 2.00 m Height: 2.50 m Total weight: approx. 22,000 kg Connection values Pump drive power: 37 kW + 11 kW Heating power: 15.3 kW + 9.2 kW Fuse rating: 250 A Condition The machine is basically functional but requires repair or maintenance. Further information on the condition can be provided upon request. Sale Inspection possible by appointment Sale from our location Dedszrngyopfx Aiiokw Please contact us for further information, images or to arrange an inspection.

Condition: used, Year of construction: 1998, operating hours: 93,000 h, functionality: fully functional, machine/vehicle number: 174380, clamping force: 2,000 kN, screw diameter: 60 mm, clearance between the columns: 560 mm, mold height (min.): 1,050 mm, input frequency: 50 Hz, input voltage: 400 V, input current: 222 A, Equipment: documentation/manual, For sale: 200-ton Krauss Maffei injection molding machine. The machine is currently in production and can be inspected while in operation. Distance between columns (H x V): 560 x 560 mm Platen size: 915 x 915 mm Max. open height: 1050 mm Dksdpszwwyaofx Aiisw Min. mold height: 350 mm Opening stroke: 700 mm

Condition: not inspected (used), Year of construction: 1996, Used ARBURG 221 M 250-55 plastic injection molding machine. Dkjdpfxs Ahzdke Aiijw Clamping force: 250 kN (25 tons). Year of manufacture: 1996. Equipped with two original control cabinets, without a display screen. Condition: Sold as is. Unique price: €1,000. Free loading onto your truck by our team.

Condition: ready for operation (used), Year of construction: 1996, operating hours: 26,811 h, functionality: fully functional, machine/vehicle number: 167988, total length: 5,360 mm, total width: 1,610 mm, total height: 1,950 mm, overall weight: 6,750 kg, Equipment: documentation/manual, Arburg 520 M - 2000 - 675 Details Manufacturer: Arburg Type of machine: 520 M - 2000 - 675 Year: 1998 Delivery time: Now Terms of Delivery: Ex Works Location: Dokkum, Netherlands Control version: Multronica Screen text: German / English Operating hours: 28,000 hrs Price: On request Technical details Clamping unit Clamping force: 2,000 kN Size of mold platens (h x v): 715 mm x 715 mm Distance between tie bars (h x v): 520 mm x 520 mm Mold opening stroke: 650 mm Mold height min.: 250 mm Max daylight: 900 mm Hydraulic ejector - stroke: 225 mm Ejector force forward/backward: 65 kN Injection unit Screw diameter: 60 mm L/D ratio: 16.5 Injection pressure: 1400 bar Stroke volume: 508 ccm Shot weight, PS: 427 g Injection rate: 310 ccm/s Injection stroke: 180 mm Nozzle pressure: 60 kN Electrical and Hydraulic Equipment Nominal capacity of pump motor: 30 kW Installed heating capacity: 18 kW Adjustable barrel heating zones: 6+1 Reservoir capacity: 260 ltr. Dimensions and weights Djdpfx Aio Ahn Exeiokw Dimensions of the machine approx.: 5.36 m x 1.61 m x 1.95 m Total machine weight: 6,600 kg

Condition: good (used), Year of construction: 2026, functionality: fully functional, Brand: Dr. Boy GmbH & Co. KG Type: BOY 20E PRO Year of manufacture: 2026 Operating hours: < 50 Screw diameter: 22 mm Injection pressure (max.): 1732 bar Shot volume (max.): 30.4 cm³ Clamping force: 20 t Max. distance between tie bars: 254 mm Min. mould height: 200 mm Distance between platens (max.): 400 mm Dimensions: 2290 x 784 x 1673 mm Dedpfo Ahn U Ssx Aiiekw Weight: 875 kg Options: • TEC package 1: wear protection & high temperature - High wear-resistant plasticizing unit (22 mm) - Ceramic high-performance heating bands - Insulation sleeves - Temperature control of the feed zone • Air ejection (1x) • Mould lighting • 4 freely programmable inputs/outputs • Oil filling (ISO-32 "EconFluid")

Condition: like new (used), Year of construction: 2019, operating hours: 3,123 h, functionality: fully functional, clamping force: 600 kN, screw diameter: 35 mm, Equipment: documentation/manual, The machine is immediately available in our Hannover/Germany warehouse and has been tested. ### Technical Data Manufacturer: Wittmann Type: SmartPower 60/210 Serial Number: Year of Construction: 2019 Operating Hours: 3,123 h Control System: Unilog B8 New Price: 75,000 euros Functionality: fully functional Condition: excellent ### Special Features Injection unit 210 Screw diameter: 35 mm Shot weight: 130 g/shot Injection pressure: 1500 bar (increased) Injection volume: 144 ccm Clamping force: 600 kN / 60 tons Tie bar spacing: 370 x 320 (h x v) Platen dimensions: 540 x 480 mm (h x v) Tool mounting height: 200 mm Maximum platen distance: 600 mm Ejector stroke/force: 150 mm / 26.4 kN Clamping unit: hydraulic Dimensions L/W/H: 3.6 x 1.3 x 1.9 m Weight: 3100 kg ### Extras - Centralized ejector with core pull device - Injection cylinder with hard chrome plating - Highly wear-resistant plasticizing unit (up to 350 °C) - Safety guard widened by approximately 550 mm - 4-way cooling water flow regulator - 21.5-inch multi-touch screen in Full HD ### Warranty - Warranty until first commissioning ### Freight *Various options are available* ##### Freight: Truck Loading - Free loading onto the buyer's truck or free delivery to your location with freight charges from the Hannover/Germany warehouse ##### Freight: Worldwide Delivery Dsdpfx Aij Aiccpjiekw - Organization of worldwide delivery by container or box including customs clearance available ### Financing - Available upon request - lease purchase option ### Price - Available upon request ### Dealer Information You can inspect all of our machines in operation at our facility and, by appointment, receive a functional guarantee for most machines. - Tested and acquired from the original owner from ongoing production (no insolvency stock) - Exclusively from our own stock and property (no brokerage) - Immediate availability - Quality management in processing - Contractual security - Short response times and fast processing - Worldwide delivery including customs clearance possible #### Purchase - We purchase well-maintained injection molding machines (25T to 600T clamping force) from 2010 onwards. - Offer submission within 24 hours on working days. - In case of agreement: immediate transfer. No brokerage or other contractual loopholes. Over 30 years of company history as a supplier to the plastics industry. Rely on quality, trust and fair business practices.

Year of construction: 2014, condition: used, The lot consists of: (1) Bale Breaker B3, bale opening unit / R%K Solution Systems; Serial No.: 100011/2014 (1) Post-bale-breaker elevating conveyor (1) Conveyor, Promac Technical Details: 14.2 kW; 400/690 V; 50 Hz; 2,200 kg Dsdpfx Ae Afm Dneiiskw

Condition: as good as new (ex-display), Year of construction: 2023, KraussMaffei KM 50-100 PX Injection Molding Machine Year of Manufacture: 2023 Manufacturer: KraussMaffei Model: KM 50-100 PX Type: Electric injection molding machine with a servohydraulic system Clamping force: 500 kN / 50 tons Control system: KraussMaffei MC6 Screw diameter: 22 mm Machine Description We offer a KraussMaffei KM 50-100 PX injection molding machine with a clamping force of 500 kN (50 tons), equipped with a modern, 5-point, knee-joint clamping system with servoelectric drive. The machine features a servoelectric drive for injection and plasticizing, as well as a servohydraulic drive for the injection unit's movement. The KraussMaffei MC6 control system, based on an industrial computer with real-time Ethernet communication technology, ensures precise control of the injection molding process. TECHNICAL DATA Clamping Unit Clamping force: 500 kN (50 tons) Mold opening force: 75 kN Clamping system: 5-point, double knee-joint system, 3-plate Clamping drive: servoelectric Mounting plate dimensions (H × V): 490 × 440 mm Column spacing (H × V): 370 × 320 mm Mold opening stroke: 300 mm Minimum mold height: 150 mm Maximum mold height: 450 mm Maximum clearance between plates: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 17 / 8 kN Injection Unit Screw diameter: 22 mm L/D ratio: 22.7 Maximum injection pressure: 2500 bar Injection volume: 38 cm³ Injection weight: 35 g Injection speed: 125 mm/s Volumetric injection rate: 48 cm³/s Maximum screw speed: 382 rpm Dkjdpfx Aio Ahxtxsisw Plasticizing rate: 6.0 g/s Nozzle radius: 10 mm Nozzle orifice diameter: 4 mm Plasticizing system for thermoplastics Electrical and hydraulic equipment Control system: KraussMaffei MC6 Connected power (according to specifications): 6.1 kW Electrical protection: 63 A Installed heating power: 6.3 kW Number of adjustable heating zones in the cylinder: 4 Dry cycle time / stroke according to EUROMAP 6: 1.1 s / 259 mm Oil tank capacity: 120 l Dimensions and weight Length: 4200 mm Width: 1440 mm Height: 1850 mm Machine weight: 4000 kg (4 tons)

Condition: used, Year of construction: 1999, functionality: fully functional, machine/vehicle number: 64977, total length: 4,000 mm, total width: 1,000 mm, total height: 1,900 mm, overall weight: 3,200 kg, Equipment: documentation/manual, Our KraussMaffei plastic processing machine is for sale. If you are intrested send an e-mail for me with your quetions. Thank you. Dksdpfxe Ah Sm He Aiijw

Condition: excellent (used), Year of construction: 2011, KraussMaffei KM 500-4300 CX Manufacturer: KraussMaffei Model: KM 500-4300 CX ClassiX Year of manufacture: 2011 Operating hours: approx. 45,000 h Clamping force: 5,000 kN / 500 tons Machine type: Hydraulic injection molding machine for processing thermoplastic materials Control system: KraussMaffei MC5 Clamping unit Mold clamping force: 5,000 kN (500 tons) Mold opening force: 279.9 kN Plate movement force – opening: 137.1 kN Plate movement force – closing: 116.8 kN Dimensions of mounting plates: 1,270 × 1,200 mm Distance between columns: 900 × 800 mm Mold opening stroke: 1,170 mm Minimum mold height: 480 mm Maximum daylight between plates: 1,650 mm Ejector stroke: 250 mm Dkjdpfj Ahw Iqjx Aiiew Ejector force: 95.4 / 48.6 kN Injection unit Screw diameter: 100 mm Injection volume: 2,827 cm³ Maximum injection weight (PS): 2,573 g Injection pressure: 1,490 bar Screw speed: 195 / 270 rpm (standard / option) Plasticizing unit in an abrasion-resistant version Screw non-return valve Open nozzle Hydraulic and electrical system Fully hydraulic clamping system Rated power of the pump motor: 90 kW Installed heater power: 44 kW Number of heating zones in the cylinder: 7 Number of dry cycles according to EUROMAP 6: 1,050 cycles/h Capacity of the hydraulic oil tank: 1,175 l Control system KraussMaffei MC5 control system Color monitor Integrated operator panel 3 USB ports Dimensions and weight Length: 8,000 mm Width: 2,600 mm Height: 2,500 mm Machine weight with control cabinet: approx. 26,800 kg

Condition: as good as new (ex-display), Year of construction: 2021, KraussMaffei KM 160-750 PXA Injection Molding Machine Manufacturer: KraussMaffei Model: KM 160-750 PXA Year of Manufacture: 2021 Machine Type: Electric Injection Molding Machine Clamping Force: 1600 kN / 160 tons Screw Diameter: 50 mm Control System: KraussMaffei MC Agile Robot: KraussMaffei LRX Machine Description We offer a KraussMaffei KM 160-750 PXA injection molding machine, manufactured in 2021, with a clamping force of 1600 kN (160 tons), equipped with a KraussMaffei LRX linear robot. The machine features a 5-point, double-toggle clamping unit with a three-platen design, with servo-electric driven axes. The injection unit is equipped with electric drives responsible for injection, plasticizing, and the movement of the injection unit. The modern KraussMaffei MC Agile control system utilizes real-time Ethernet technology, enabling precise control of the production process. The machine is equipped with a complete plasticizing unit with a 50 mm diameter screw. TECHNICAL DATA Clamping Unit Clamping Force: 1600 kN / 160 tons Mold Opening Force: 240 kN Clamping System: 5-point, double-toggle, three-platen design Clamping Drive: servo-electric Mounting Plate Dimensions (H × V): 770 × 720 mm Column Spacing (H × V): 570 × 520 mm Mold Opening Stroke: 450 mm Minimum Mold Height: 300 mm Maximum Mold Height: 600 mm Maximum Daylight Between Platens: 1050 mm Ejector Speed: 300 mm/s Injection Unit Screw Diameter: 50 mm L/D Ratio: 20.2 Maximum Injection Pressure: 1892 bar Injection Volume: 393 cm³ Injection Weight: 357 g Injection Speed: 200 mm/s Volumetric Injection Rate: 393 cm³/s Dsdj Ahxyhjpfx Aiijkw Screw Speed: 267 rpm Plasticizing Rate: 36.5 g/s Nozzle Radius: 10 mm Nozzle Orifice Diameter: 4 mm Injection Drive: electric Plasticizing Drive: electric Injection Unit Movement Drive: electric Electrical Equipment Control System: KraussMaffei MC Agile Connected Power: 31.2 kW Installed Heating Power: 15.5 kW Number of Adjustable Cylinder Heating Zones: 5 Dry Cycle Time / Stroke according to EUROMAP 6: 1.86 s / 399 mm Linear Robot Manufacturer: KraussMaffei Series: LRX Type: Linear robot for injection molding machine service Application: Automation of part removal and handling Machine Dimensions and Weight Length: 5650 mm Width: 1820 mm Height: 1950 mm Net Weight: 8500 kg / 8.5 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 300-1400 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 300-1400 CX Year of Manufacture: 2019 Serial Number: 61032709 Machine Type: Hydraulic injection molding machine for plastics Clamping Force: 3000 kN / 300 tons Screw Diameter: 60 mm Control System: KraussMaffei MC6 Robot: KraussMaffei LRX100 Additional Equipment: Safety guard and conveyor Machine Description We offer a KraussMaffei KM 300-1400 CX injection molding machine, manufactured in 2019, with a clamping force of 3000 kN (300 tons), equipped with a KraussMaffei LRX100 linear robot, a safety guard, and a conveyor. The machine features a fully hydraulic clamping system and a modern KraussMaffei MC6 control system, based on an industrial PC with real-time Ethernet technology. The control system is equipped with an integrated 19-inch operator panel with a color touchscreen. Djdpfx Ae Ahx A Isiiskw The injection molding machine has a complete plasticizing unit for thermoplastics with a 60 mm diameter screw, a check valve, and an open nozzle. TECHNICAL DATA Clamping Unit Clamping Force: 3000 kN / 300 tons Mold Opening Force: 169 kN Platen Dimensions (H × V): 995 × 1050 mm Column Spacing (H × V): 630 × 630 mm Mold Opening Stroke: 820 mm Minimum Mold Height: 330 mm Maximum Distance Between Platens: 1150 mm Ejector Stroke: 200 mm Ejector Force (forward / backward): 58 / 28 kN Injection Unit Screw Diameter: 60 mm L/D Ratio: 20.8 Maximum Injection Pressure: 2006 bar Injection Volume: 679 cm³ Injection Weight: 618 g Injection Speed with Accumulator (option 70.25): 300 mm/s Volumetric Injection Capacity with Accumulator (option 70.25): 848 cm³/s Screw Speed: 260 rpm Nozzle Radius: 15 mm Nozzle Orifice Diameter: 6 mm Plasticizing Unit for Thermoplastics with Check Valve Electrical and Hydraulic Equipment Control System: KraussMaffei MC6 Operator Panel: 19-inch, color, touchscreen Rated Power of Pump Motor: 45 kW Installed Heating Power: 22.4 kW Dry Cycle Time / Stroke According to EUROMAP 6: 2.7 s / 441 mm Hydraulic Oil Tank Capacity: 720 l Robot and Additional Equipment Linear Robot: KraussMaffei LRX100 Safety Guard Conveyor for Receiving and Transporting Molded Parts Dimensions and Weight Length: 6150 mm Width: 2170 mm Height: 2250 mm Net Machine Weight with Control Cabinet: 12,200 kg / 12.2 t

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 161-750 PX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 161-750 PX Year of manufacture: 2019 Machine type: Electric injection molding machine for plastics Clamping force: 1600 kN / 160 tons Screw diameter: 60 mm Injection unit: SP 750 Machine description We offer a KraussMaffei KM 161-750 PX injection molding machine, manufactured in 2019, with a clamping force of 1600 kN (160 tons), equipped with an SP 750 injection unit and a 60 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 1600 kN / 160 tons Mold opening force: 240 kN Column spacing (H × V): 585 × 535 mm Mold opening stroke: 450 mm Minimum mold height: 200 mm Maximum mold height: 500 mm Maximum distance between platens: 950 mm Ejector stroke: 175 mm Ejector force (forward / backward): 33 / 16 kN Maximum mold weight: 2000 kg Injection unit SP 750 Screw diameter: 60 mm L/D ratio: 21.3 Maximum injection pressure: 1564 bar Injection volume: 475 cm³ Injection weight: 432 g Injection speed: 125 mm/s Dsdpfx Aio Ahxzfeijkw Volumetric injection rate: 297 cm³/s Screw speed: 458 rpm Installed heating power: 18.0 kW Nozzle pressure force: 42 kN General data Drive power: 20.0 kW Dry cycle time / stroke according to EUROMAP 6: 1.9 s / 410 mm Oil tank capacity: 200 l Dimensions and weight Length: 6400 mm Width: 1990 mm Height: 2010 mm Machine weight: 10,200 kg / 10.2 t

Condition: ready for operation (used), Year of construction: 2014, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 7230-0232, clamping force: 500 kN, screw diameter: 25 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2014 • Machine no.: 7230-0232 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 25 mm Dkodpfxo Aggume Aiiow • Control system: NC5 / CDIAS • including removal device Geiger MiniServo 1.5 • Approximately 12 million cycles In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2013. Both machines have extensive features, including electric ejectors and screw drives, active tool protection functions, process data recording, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we would be happy to provide you with further information and images. Our asking price for the complete package, including both machines and both Geiger removal devices, is €55,000 net, ex works.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 520 mm, mold height (min.): 250 mm, overall weight: 8,000 kg, Equipment: documentation/manual, We offer a ready-to-use Arburg ALLROUNDER 520 C 2000-675 injection molding machine, manufactured in 1996. Manufacturer: Arburg Model: ALLROUNDER 520 C 2000-675 Year of manufacture: 1996 Condition: Ready for operation Machine type: Injection molding machine If you have any questions or require further information, please send us a message or contact us by phone. The machine is sold without warranty. Dodpfx Aij Ah Rrwoijkw

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 161394, clamping force: 6,500 kN, screw diameter: 90 mm, injection weight: 2,254 g, overall weight: 33,000 kg, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Horizontal column spacing: 1,025 mm Vertical column spacing: 930 mm Tool height: min. 450 mm Tool height: max. 950 mm Opening stroke: max. 1,800 mm Injection Unit Screw diameter: 90 mm Injection volume: 2,480 cm³ Injection weight: 2,254 g Dkjdps Afw Hyjfx Aiiow MACHINE DETAILS Rated power of the pump motor: 55 kW Heating capacity: 62 kW Dimensions & Weight Dimensions (L x W x H): approx. 8,300 x 2,500 x 2,330 mm Machine weight: approx. 33,000 kg

Condition: as good as new (ex-display), Year of construction: 2019, KraussMaffei KM 80-380 CX Injection Molding Machine Manufacturer: KraussMaffei Model: KM 80-380 CX Year of manufacture: 2019 Machine type: Hydraulic injection molding machine for plastics Clamping force: 800 kN / 80 tons Screw diameter: 40 mm Injection unit: SP 380 Machine description We offer a KraussMaffei KM 80-380 CX injection molding machine, manufactured in 2019, with a clamping force of 800 kN (80 tons), equipped with an SP 380 injection unit and a 40 mm diameter screw. TECHNICAL DATA Clamping unit Clamping force: 800 kN / 80 tons Mold opening force: 55 kN Column spacing (H × V): 420 × 420 mm Mold opening stroke: 500 mm Minimum mold height: 250 mm Maximum distance between platens: 750 mm Ejector stroke: 150 mm Ejector force (forward / backward): 23 / 10 kN Maximum mold weight: 1000 kg Injection unit SP 380 Screw diameter: 40 mm L/D ratio: 20 Maximum injection pressure: 2101 bar Injection volume: 201 cm³ Injection weight: 183 g Injection speed: 100 mm/s Volumetric injection rate: 126 cm³/s Screw speed: 295 rpm Installed heating power: 10.9 kW Dsdpfx Ae Ahxv Eeiiokw Nozzle pressing force: 50 kN General data Pump drive power: 15 kW Dry cycle time / stroke according to EUROMAP 6: 1.7 s / 294 mm Oil tank capacity: 280 l Dimensions and weight Length: 4090 mm Width: 1480 mm Height: 2020 mm Machine weight: approximately 3500 kg

Condition: good (used), Year of construction: 2007, Ref. no.: 18597 Manufacturer: ENGEL Type: insert 200 H/70 CC 200 Year of construction: 2007 Clamping unit Clamping force: 70 ton Opening stroke: 305 mm Injection unit Screw diameter: 25 mm Dkodpfoy Au I Usx Aiiew Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2381 bar Measurements and weight Dimensions: 4,0 x 1,8 x 2,5 m Machine weight: 5600 kg Further information: The ENGEL INSERT 200H/70 is a professional vertical injection moulding machine specially designed for insert molding and precision technical plastic applications. Built with ENGEL’s compact and robust machine concept, this model has been widely used for many years in the automotive, electronics, cable technology and technical plastics industries. One of the major advantages of this machine is its rotary table system. This design allows the operator to load inserts on one side while production continues on the other side. As a result, cycle times are reduced and production becomes safer and more efficient. This system is especially advantageous for manufacturing metal insert parts, connectors, cable components and precision technical products. Compared to conventional horizontal injection moulding machines, the ENGEL INSERT series offers a much more ergonomic and controlled process for insert placement. Thanks to the vertical clamping system, inserts remain stable inside the mould, enabling highly precise production results. The ENGEL control system used on this machine is known for stable process management and reliable operation. Its user-friendly interface allows easy handling in daily production. The machine has approximately 51,944 operating hours and was reportedly in running condition until removed from production. The overall condition of the machine is clean and well maintained. The electrical cabinet is tidy and the mechanical components appear to be in good condition. The ENGEL INSERT series is particularly suitable for: * insert molding applications * metal/plastic combination parts * electronic component production * connector and cable technology * technical plastic parts * precision industrial products With its robust mechanical construction, compact design and professional production capabilities, the ENGEL INSERT 200H/70 represents a reliable and long-lasting production solution for technical plastic manufacturers.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 61,679 h, functionality: fully functional, machine/vehicle number: 7230-0182, clamping force: 500 kN, screw diameter: 22 mm, • Sumitomo SHI Demag IntElect 50/370-110 • Year of manufacture: 2013 • Machine no.: 7230-0182 • Clamping force: 500 kN / 50 t • Tie bar spacing: 370 mm • Injection unit: 110 • Screw diameter: 22 mm • Control system: NC5 / CDIAS Dkjdpe Aggpajfx Aiiow • PLC operating hours: approx. 61,679 h • Drive operating hours: approx. 56,166 h • Heater operating hours: approx. 57,914 h • Total cycles: approx. 11.9 million • incl. Geiger MiniServo 1.5 parts removal device In addition, we are selling a Sumitomo SHI Demag IntElect 50/370-110, year of manufacture 2014. Both machines feature extensive equipment, including electric ejectors and screw drives, active tool protection functions, process data acquisition, and interfaces for handling and peripheral devices. The machines were in operation until they were dismantled. If you are interested, we will gladly provide you with further information and images. Our asking price for the complete package consisting of both machines, including both Geiger parts removal devices, is €55,000 net, ex warehouse.