7
Injection Unit
Screw diameter 45 mm
Stroke volume 286 cm3
Injection pressure 2333 bar
Additional Equipment
Handling, manufacturer Hahn (optional)
Cooling unit, manufacturer Rehsler (optional)
This Netstal SynErgy 1750-600 Injection Moulding Machine was manufactured in the year 2012 in Germany. It has 13000 production hours. This machine works with a clamping force 1750 kN and a screw diameter of 45mm. Very good condition.
Application Types
Bkqmemye
Injection Moulding
8
Clamp force: 500kN, connected load: 11kW, weight: 2.75t.
Bzmv3rwruo
6
Nearly-new. It only worked 3 months manufacturing toilet seat covers.
For highly plastic materials such as rubber, melamine, urea, bakelite, powder, foam, etc.
Technical specifications:
With 2 compression molding presses
Clamping force: 700t
Plate size: 1200 x 1200 mm.
Piston diameter: 660 mm.
Closing stroke: 760 mm.
Prt9h
Space between tie bar: 1360 x 800 mm.
Pump pressure: 210 kg / cm2
Heating: 85.8 kW
Oil hydraulic system: 25 x 2 hp
Oil tank capacity: 920 l.
Voltage & Frequency: 380 v ...
10
Brand:MIR
Model:RMP 380 1290
Serial Number: 6589
Hueuxpmc3
ARBURG ALLROUNDER A 470 S 1000-400 injection moulding machine + MULTILIFT V SELECT
- Machine number: 212902
- Tumbler: 1100 kN
- Pump motor: 30 kW
- Voltage: 400 V / 50 Hz
- Back-up fuse motor / heating: 125 A
- Oil filling: 290 l
- Electromechanical dosing drive
- Position controlled screw
- Accumulator for high pressure / speed
- Technology level 2 with two control pumps for controlled machine movements
- Plasticizing cylinder 35 mm highly wear and corrosion resistant, max. processing temperat...
13
ES 4550/600 HLST
Year : 2000
Screw diameter: 105 mm
Bolt volume: 3380 cm3
B7p9jmzdoa
4
General Data
Measurements width 6900 mm
Measurements depth 2000 mm
Measurements height 2600 mm
Machine weight 13000 kg
Injection Unit
Screw diameter 60 mm
Injection pressure 2268 bar
Clamping Unit
Opening stroke 134 kN
Distance between bars 1045 mm
Mould height min 295 mm
Bh0lxjv
This Ferromatik K-TEC 200-1000/2F Injection Moulding Machine was manufactured in the year 2013 in Germany. This machine has been working for 50000 hours. It incorporates a screw diameter 60 mm, an injection pressure ...
8
Clamping force: 1200kN, opening stroke: 0-400mm, tool installation height: 250-550mm, nominal load: 91kW, machine needs overhauling.
Cabokya7nz
2
Functional disassembled! Three months warranty! With invoice!
Vtf98mph
11
Injection blow molding machine
Producer: SABMANN
Model: SB65IB
Condition: used - for technical inspection
B03ld0jh0i
Year of production: 2005
6
For sale is a Novopax spraying / blowing machine.
The machine is functional and ready for use.
4 tons own weight
Machines purchase / sale
Gr3smcc7c
PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC.
Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours?
For more information or to contact us, please visit our website
11
Type: ES 3350/400 HLST
Year : -98
Zbrslyjr
Screw diameter: mm
Bolt volume: 3380 cm3
Opening distance: 1200 mm
Min. Tool installation height: 500 mm
Max. plate distance: 1700 mm
Clamping plate size hor. x vert.: 1480x1300 mm
3
Injection Unit
Iuy8cte08
Screw diameter 42 mm
This BOY 90A Injection Moulding Machine was manufactured in 2008 in Germany. It has a production history of 43500 hours. This machine can operate with a screw diameter 42 mm.
Application Types
Injection Moulding
8
Max. injection pressure: 2500bar, clamping force: 50kN, pneumatic operational pressure: 6bar, controls: BATTENFELD UNILOG B4, length: 1800mm, width: 850mm, height: 2000mm, weight: 1.15t, including picker, documentation and accessories.
Mfxjiurw
4
Removed from a used machine.
Three months warranty! With invoice!
Cdgesxw8
5
Kistler instruments TYPE 2859, for pressure transducers, cavity pressure.
Btmifrhkos
4
Injection Unit
Screw diameter 48 mm
B9hakkgfxb
This BOY 90M Injection Moulding Machine was built in 2004 in Germany. It has 53100 production hours . This machine can operate with a screw diameter 48 mm.
Application Types
Injection Moulding
4
Controls: ENGEL EC100, with documentation, the screw drive is defective and should be overhauled.
Qcgap
6
Screw diameter: 110mm, screw stroke: 40mm, clamping force: 13,000kN, injection pressure: 1815bar, weight: 80t, including peripherie.
Hr3ae3bpe
3
Screw diameter: 100mm, clamping force: 13.000kN, tool installation height: 600-1550mm, weight: 69t, operational hours counter: 15,460h.
Hp0daiu
6
Weight: 12.4t, operational hours counter: 21,484h.
Hllsmrmdy
4
Closing force: 2750kN, min. tool installation height: 350mm, screw diameter: 60mm, max. shot weight: 505g, weight: 20t, operational hours counter: ca. 75,000h, with two core pulls.
Puk3gi
2
Clamping force: 830t, mould installation height: 350-1100mm, screw diameter: 80mm, controls: SIEMENS S5, operational hours count: 32,979h.
St837c
1
Technical details on demand.
Oj9tx
2
Installation height: 210mm, opening stroke: 610mm, screw diameter: 30mm, clamping force: 600kN.
3kthd9qb
1
Closing force: 50t, distance between tie bars: 320x320mm, screw diameter: 35mm, heating output: 9.4kW, controls: ARBURG Dialogika, including Handling WALLDORF.
Hvmrssh
4
Ejection stroke: 35mm, weight: 700kg.
Dalatlee3
2
Clamping force: 550t, connected load: 5,5kW.
Bzvz8io0un
6
Screw diameter: 35/ 25mm, connected load: 78kW, including Handling MOTAN ERC 23, operational hours counter: 74,118h, was regularly maintained.
Cxd37qsk
3
Max. clamping force: 350kN, max. opening force: 31.1kN, distance between tie-bars: 270x270mm, weight: 1.8t.
Pgt3l
1
Clamping force: 270kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
Ene2jjr
4
Clamping force: 350kN, opening stroke: 200mm, connected load: 14.6kW, weight: 1.06t.
Zmydo
1
Shot volume: 2x 6l, max. injection pressure: 2000bar, clamping force: 4400kN, heating plate dimensions: 550x1050mm, max. opening stroke: 900mm, controls: micro computer CC200 AD2, operational hours counter: ca. 20.000h, with 2x hydraulic core pull FAP and 2x hydraulic core pull BAP, machine is installed in a production island.
Nxmgzwc
4
Max. clamping force: 850kN, min. tool installation height: 250mm, max. opening stroke: 375mm, screw diameter: 40mm, weight: 3.06t.
Fttronwv
4
Clamping force: 500kN, distance between tie bars: 270mm, cylinder diameter: 30mm, heating output: 5.1kW, motor power: 15kW, weight: 2.05t.
Gx0saweis
1
Max. closing force: 500kN, closing force: 273kN, opening force: 31kN, distance between tie bars: 270x270mm, length: 3900mm, width: 1750mm, height: 1920mm, weight: 1.9t.
Cenee7tr
6
Length: 5100mm, width: 1500mm, height: 2300mm, weight: 6.5t.
Be2josggr3
6
Length: 4000mm, width: 1300mm, height: 2000mm, weight: 3.2t.
Be2jo2xmf7
3
Clamp force: 750kN, heating output: 11kW, weight: 3t.
Bh0r8qv
6
Clamping force: 5500kN, mould height: 450-975mm, screw diameter: 55mm, max. injection volume: 772cm³, connected load: 4.2kVA, weight: 33t, operational hours counter: 78,595h.
B73ill8e
3
Screw diameter: 50mm, injection force: 371kN, closing force: 1500kN, opening stroke: 0-450mm, weight: 11.2t, including documentation.
Ks2yxkpb
2
There are four identical injection moulding machines available, weight: 6.3t, operational hours counter: 25,000-42,000h, the machines possibly need to be reconstructed.
P8bs9
2
There are two N 580/140 and three N 580/150 available, year of construction machines 1/ 2: 1988/ 1990.
Pvwj2a
5
Clamping force: 90t, weight: 9.4t.
Tocuuqel
6
Weight: 5.3t, documentation available.
Pnl3r
2
Clamping force: 500kN, opening stroke: 325mm, distance between tie-bars: 270x270mm.
By87dwvxno