Used heating & cooling units for sale (152)

Year of construction: 2022, condition: used, current capacity 22 KW total power requirement 22 kW Kjlhcdwey Dh Hyo Hsdk weight of the machine ca. 141 kg dimensions of the machine ca. 0,8 x 0,6 x 1,2 m Induction device for heating up metal parts such as screws, nuts, sheets etc. Device works with liquide cooling.

Condition: used, HB-Therm HB-100 U1 temperature control unit, Temperature control, Liquid temperature control, Industrial temperature control, Thermolator, used machine Manufacturer: HB-Therm Type: HB-100 U1 Overall dimensions: 200 × 650 × 500 mm Year of manufacture: 2008 Kdelhcdeyzmagow Hok Technical data: Maximum operating temperature: 100 °C Heating capacity: 8 kW Cooling capacity: 30 kW Heat transfer medium: water

Condition: used, Year of construction: 2011, We are offering this very rarely used oil temperature control unit. It was used for research purposes. The unit still contains the thermal oil. The two connection hoses (without guarantee) are also included. Please send your price proposal—and allow us some time to respond, as we handle this alongside our main business activities. Kdelhcdeyk Dw Tew Hok The unit must be dismantled and disconnected by your own qualified personnel, insofar as this has not already been done. All transport-related procedures and requirements must be carried out at your own cost and risk. The buyer is liable for any (consequential) damage that occurs on the premises. Collection must be completed within 14 days after the sale.

Condition: used, Year of construction: 2015, functionality: fully functional, The three temperature control units from BoeTherm are for sale. They have all been tested in my workshop and are fully functional. The price is per unit!!! Kjlhjxpt Rrscdw Hedk 1. BT-90-9-D2 from 2011, €1,255 2. BT-95-09-D2-M3-V5 from 2015, €1,255 3. BT-95-09-D2-M3-V5-VA-MS from 2015, €2,250 Medium: Water Heating capacity: 9 kW Pump capacity: 84 L/min Pump pressure: 2.8 bar Tank volume: 6 liters Dimensions: L: 650 mm, W: 265 mm, H: 650 mm, Weight: 45 kg

Condition: like new (used), Year of construction: 2019, operating hours: 3,825 h, functionality: fully functional, The Wittmann plus D140 temperature control unit is for sale. The device was used in a technical center, which explains the low operating hours. Original price: €5,260 - Max. water temperature: 140°C in the mold supply line - Max. system pressure: 10 bar in the mold return line - Pump: 0.5 kW (1.4A) / 50Hz, max. 40 l/min, max. 4.5 bar, seal-less and magnetically coupled - Heating capacity: 7.5 - 9 kW (11.5 - 12.5A) at 380 - 415V - Cooling capacity: 20 kW at ΔT = 75°C (indirect cooling) - Operating voltage: 3x 380 – 415 V, 50 Hz - Control voltage: 24V AC - Power consumption: 14.5A / 9.5kW (the total connected load increases if options such as reinforced pump or additional heating capacity are added) - Main connection: 4m cable incl. 16A CEKON plug - WITTMANN 4.0 interface including license, with shielded RJ45 socket Kdslhcdwjy Atnyj Hok - USB port: socket for software updates and data logging - Mold supply and return: G3/4'' female thread - Mold circuit with angle-seat strainer, mesh size 0.25mm - Water inlet and outlet: G3/8'' female thread - Strainer in water inlet: G3/8'' female thread, mesh size 0.3mm - Color: RAL7047 (Telegrey 4), front RAL3004 (Purple red) - Weight: Net: 65 kg, Gross: 82 kg (incl. pallet and packaging) - Dimensions (L x W x H): 840 x 265 x 650 mm - Dimensions incl. pallet & packaging (L x W x H): 920 x 630 x 830 mm - Fill volume: 3 liters - Noise level: 70 dB(A) Media: - Process and cooling medium: water

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: 1916180-002656, - Type: PSG ProfiTEMP+ 66 zones - Year of manufacture: 2019 - Serial number: 1916180-002656 - Power supply: 230 VAC (3~ / N / PE) 50/60Hz - Power: max. 43kW, 3x63 A - Connections: XS3 RJ45, XS1 RS485 - Condition: Used only for test moulds Kslhoy Ah Dvscdw Hodk - Brand: PSG Plastic Service GmbH - Extras: 8x cable with 24-pin plug & manuals

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 154701, Type: 90S/6/TP20/2K/RT45 Power: 6.5 kW Maximum operating temperature: 90 °C Kelhcoy Agknsdw Hodk Medium: Water

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 260640, 261157, Type: P140S/6/B501/1K/RT45 Power: 6.9 kW Maximum operating temperature: 140 °C Kolhcdoy Agi Rjw Hsdk Medium: Water Pressurized temperature control unit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 247580, 247422, Type: P140/9/SG51/1K/RT45 Power: 9.8 kW Kdsloy Agh Hshcdw Hjk Maximum operating temperature: 140 °C Medium: water Pressurized temperature control unit Two units available Price: 950 EUR per unit

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 310368, Type: P160/9/SG51/1K/RT45 Kslhoy Aghyjcdw Hedk Power: 9.6 kW Maximum operating temperature: 160 °C Medium: Water Pressurized temperature control unit

Year of construction: 2024, condition: like new (used), WSIA-10 Chiller CE, 2024, Excellent Condition Price EUR 4,200 Kdelhcdwoyz Sm So Hek Description WSIA-10 Chiller CE for sale. Bought new in 2024 together with the injection moulding machines. In good working condition and ready for operation. Sold as a separate unit. Quantity available: 1. Technical Specifications Model: WSIA-10 Type: Chiller Version: CE Year: 2024 Condition: Good working condition Quantity available: 1 ⸻ WSGP-400 Crusher CE, 2024, Excellent Condition Price EUR 1,500

Condition: used, Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT168 E, used machine Manufacturer: Tool-Temp Type: TT 168 E Overall dimensions: 710 × 325 × 785 mm (incl. castors and handles) Colour: Silvergrey RAL 7001 Weight: Approx. 67 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) Digital display of set and actual values Automatic temperature monitoring Electronic flow control with digital display Automatic minimum flow control Suitable for both water and oil media Temperature range max.: Water: 90 °C Oil: 150 °C Heating capacity: Water: 12 kW / 18 kW (stages: 3/9, 9/9) Oil: 6 kW (stages: 3/3) Cooling capacity: 45 kW at 90 °C Pump capacity: Motor: 0.75 kW Pressure mode: max. 4.0 bar | max. 60 l/min Kolsx Emfkehcdw Hodk Vacuum mode: max. 8 m H₂O Tank capacity: Min. 16 litres, max. 20 litres Connections: Medium: ½" BSP female thread Cooling water inlet: ¾" BSP female thread (with water filter) Cooling water outlet: ⅜" BSP male thread

Condition: ready for operation (used), Tempering unit, liquid tempering unit, industrial tempering unit, Thermolator, Tool-Temp TT138 B SPEZ, used machine Manufacturer: Tool-Temp Type: TT138 B SPEZ Overall dimensions: 1240 × 480 × 1400 mm (incl. castors) Weight: Approx. 180 kg (empty) Properties: Self-optimizing electronic microprocessor controller (MP-888) with digital display (set and actual temperature) Automatic temperature monitoring Electronic flow control with digital display and automatic minimum-flow control Pressure-increasing pump Temperature measurement at the mould Pressure relief system Leak stopper and mould drainage using compressed air Automatic filling (automatic medium fill) Max. temperature range: Water: up to 160 °C Heating capacity: 24 kW — switchable in stages (6/18), automatic switching of required heating power Cooling capacity: Indirect: approx. 85 kW at 160 °C Direct: approx. 60 kW at 60 °C Pump capacity: Motor: 1.8 kW Pressure mode: max. 6.5 bar | max. 75 l/min Vacuum mode: max. 8 m H₂O Seal-less magnetic coupling drive (no mechanical seal) Connections: Medium (water): ¾" BSP female thread Cooling water inlet: 1" BSP female thread (with water filter) Kdolhcdsx Hgmwew Hjk Cooling water outlet: 1" BSP male thread Compressed air (for mould drainage/venting): ¼" BSP female thread

Condition: used, Year of construction: 2019, functionality: fully functional, 1,0 St. gebr. Temperiergerät mit 48 Regelstellen Hersteller: GAMMAFLUX Typ: GS1G030F024S4EJ Kjlhcdwoyxxz Do Hedk Baujahr: 2019

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: Keloq Nfuzjhcdw Hsdk - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details We have different options for different requirements, please contact our team for more info.

Year of construction: 2017, operating hours: 1,052 h, condition: reconditioned (used), functionality: fully functional, machine/vehicle number: SN. S10008727, The dynamic temperature control system "vario" is designed for cyclic mold temperature regulation. It is equipped with a mold-proximate valve switching unit (piston accumulator) to supply the piston inserts with water at up to 200 degrees Celsius. The system will be inspected by Technotrans (GWK) prior to sale. Kdslhcoyxgnfsdw Hok Further technical details for the "vario" temperature control unit are available upon request. The complete system consists of: - Medium: Water up to max. 200°C - Heating capacity (heating circuit): 90 kW - Heating capacity (cooling circuit): 9 kW - Cooling: indirect - Cooling capacity: 280 kW - 1 piece of 2-circuit vario system wh200 (cyclic temperature regulation of mold inserts) - 1 mold-proximate valve switching unit - 1 piston accumulator - 1 electronic control unit ESR (energy storage) - 1 water treatment unit - 1 hose and connection kit (optional, at extra cost) ...and much more – see pictures.

Year of construction: 2021, condition: excellent (used), functionality: fully functional, The hot runner controller from Hasco is for sale, including a few technical details. An operating manual is available in both German and English. Number of zones: 6 Kdjloyxa Npohcdw Hek Dimensions: 434 mm x 226 mm x 365 mm Operating temperature: 0–50°C Display per zone: 2x three-digit, 7-segment display Control panel: 12 keys Electrical connection with CEE plug: 3x32A

Condition: ready for operation (used), Wittmann MTC Basic-C90 F27 Temperature Control Unit Single-Circuit Temperature Controller Price is for one unit. Several units available! Year of manufacture: 2017 Year of manufacture: 2017 Year of manufacture: 2018 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Power: 10 kW You are welcome to schedule a viewing appointment. We can also organize affordable shipping for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check our further offers. Company names and trademarks mentioned are the property of their respective owners and are used for identification and product description purposes only. Kjleyw Rh Hohcdw Hedk Deviations in technical data and errors in the item description may occur and are subject to change.

Year of construction: 2017, condition: ready for operation (used), Wittmann MTC Primus-C90 F27 Temperature Control Unit Single-Circuit Temperature Control Unit Price is for one unit. Year of manufacture: 2017 Max. temperature: 90°C Pump capacity: 40 l/min Dimensions: approx. 235mm x 590mm x 660mm (W x D x H) Weight: approx. 31 kg Kdeleyw Rfxohcdw Hek Power: 10 kW You are welcome to arrange an inspection. We are happy to organize an affordable shipping service for you! You will receive a proper invoice. For international customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our shop and check out our other offers. The company names and trademarks mentioned are property of their respective owners and are used for identification and description purposes only. Technical data may differ and errors in the article description are possible and reserved.

Condition: used, For sale or free of charge are three climate smoke chambers manufactured by AUTOTHERM, including accessories. These units are ideally suited for meat and food processing, particularly for cold smoking. Technical Data / Features: Chamber 1: approx. 8 racks (W approx. 2.10 m x D 5 m) Chamber 2: approx. 10 racks (W approx. 2.10 m x D 6 m) Chamber 3: approx. 12 racks (W approx. 2.10 m x D 7 m) Cold smoke system with 2 smoke generators (Goliat, sawdust) Temperature range up to approx. +22 °C (hot water heat exchanger) Humidity control available Cooling coil (R232, R404) Kelhcdjyw Hl Ijw Hodk Some refrigerant compressors present Construction: Air ducts, wall cladding, and control cabinet made of V2A (stainless steel) Condition: Electronics/control currently non-functional Control cabinet available Condition as shown in the pictures Additional equipment / accessories: Smoking sticks (wood) 2 kettles Cooking chamber (for 2 racks) Cleaning machine (defective) Freezer Important notes: Available free of charge Dismantling and transport to be organized by the buyer Inspection possible by appointment

Year of construction: 2005, condition: good (used), Hot Runner Temperature Control Unit PMS Systems K10-8 Hot Runner Controller Manufacturer: PMS Systems Limited Model: K10-8 Serial number: 00404-001 Date: 19.10.2005 Supply voltage: 415 V Phases: 3 / star Max current: 63 A per phase Kdeloytqvuehcdw Hsk Frequency: 50/60 Hz Type: Hot runner temperature controller for injection moulding tools Connections: Multiple connections for heaters and thermocouples Mobility: Mobile industrial housing CE marking: Present Location: Freiburg

Condition: excellent (used), Year of construction: 2017, Cooling units Brand: Autotherm Model: AKW 150 28 bar Year: 2017 The units are like new Kdolhcded Tix Rsw Hok

Year of construction: 2025, condition: new, Chiller with low GWP refrigerant R32. Cooling capacity according to Eurovent: 37 kW. Integrated pump, internal tank, coaxial evaporator, winter package for operation at ambient temperatures down to -25°C, internal bypass. Also available with other cooling capacities. Kdelhomhgg Rscdw Hek

Year of construction: 2012, condition: ready for operation (used), An air-cooled monoblock water chiller Green Box for the plastics industry is available. Cooling capacity: approx. 20 injection molding machines, power: 25kW, refrigerant circuits: 2, refrigerant: R407C, cooling capacity: approx. 80kW, air flow rate: approx. 16500m³/h. Machine dimensions X/Y/Z: approx. 3300mm/1100mm/2100mm, weight: approx. 1300kg. Documentation available. An on-site inspection is possible. Kdslhcsyvuunjdw Hsk

Condition: used, Tempering, Circulating fluid tempering, Thermolator, Used machine Manufacturer: Industrial Frigo Típus: TW 9/95/x Year of manufacture: 2008 Kelhcdjyrtk Sew Hjdk Weight: 190 Kg Overall dimensions: 1300 x 450 x 1200 mm Max. temperature: 95 °C Pressure: 4,35 bar Electrical data: 400 V ; 50 Hz ; 26 A ; 10 kW