Used All Electric Injection Molding Machine for sale (106,767)

Condition: used, Year of construction: 2014, Used machine in good condition. Available for immediate delivery. - Screw diameter: 35 mm - Injection pressure: 2.400 bar - Injection pressure: 2.400 / 1.930 bar - Injection volume: 220 cm³ - Nozzle stroke / force max.: 305 / 28 mm / kN - Ejector stroke / force max.: 170 / 77 mm / kN - Clamping force: 2.800 kN - Platen size (h x v): 970 x 970 mm - Heating zones: 4 - Distance between tie-bars (h x v): 650 x 650 mm - Dimensions (long x wide x high): 7.100 x 2.000 x 2.600 mm Dqngbt - Weight: 9.000 kg

Condition: good (used), Injection molding machine Engel Victory 310-60 Electric CC200 Year of manufacture: 2006 Clamping unit type: Fully hydraulic Clamping type: Columnless Clamping force: 600 kN Plate dimensions (table dimensions): 720 mm Distance between columns: 450 mm Mold height: 600 mm Opening stroke: 900 mm Ejector stroke: 115 mm Ejector force: 125 mm Moving plate centering (D): 125 mm Fixed plate centering (D): 4,70 m Threaded holes on plates: 5700 kg Maximum mold weight: 1,40 m Dimensions (W x H): 2,70 m Machine weight: 5700 KG Heating channels: 9 Nozzle clamping force: 160 mm Nozzle stroke: 360 1/min Pump drive power: 13 kW Heating capacity: 9 kW Standard voltage: 400 V 50 Hz Oil capacity: 185 l Auger diameter: 35 mm Injection volume: 154 cm³ Injection pressure: 2400 bar Screw pitch: 24 mm Screw speed: 155 cm³/sec. Plasticization capacity: 40.6 Air injection speed: 290 Additional equipment: Monitor text in German CEE 16A plug socket CEE 16A plug socket Hydraulic core 2x Air fan 1x Water-cooled machine battery Machine without material tank Leveling elements Standard interface/Euromap 12 Cdle0V82 Schuko 10A plug socket Schuko 10A plug socket

Condition: used, Year of construction: 2010, Used machine in good condition. Available for immediate delivery. - Screw diameter: 25 mm - Clamping force: 1.000 kN - Injection rate: 109 cm³/s - Injection pressure: 2.400 bar - Injection volume: 59 cm³ - Screw speed: 400 rpm Dpbcid - Screw L/D ratio: 24.8 - Nozzle stroke / force max.: 200 / 28 mm / kN - Ejector stroke / force max.: 100 / 24 mm / kN - Mould opening stroke max: 350 mm - Mould height max: 450 mm - Mould height min: 150 mm - Platen size (h x v): 650 x 600 mm - Heating zones: 4 - Distance between tie-bars (h x v): 460 x 410 mm - Dry cycle time: 1,45 / 320 sec/mm - Power: installed max: 16 kW - Weight: 3.900 kg - Dimensions (long x wide x high): 4.000 x 1.300 x 1.900 mm

Condition: used, Motor, 1FK7060-5AF71-1DU5-Z, 4 available. Motor, 1FK7100-5AF71-1AG0, 2 available. Motor, 1FW3204-1GN72-5CK0-Z, 1 available. Motor, 1FW3204-1GY72-5CK4-Z, 1 available. Motor, 1FW3204-7GN01- 4GY7-Z, 2 available. Gxaqht3 Display, 2 available. Siemens line filter for 120 kW Act, 6SL3000-0BE31-2AA0, 1 available. Siemens Simodrivo Drives, 6SN1111-0AA00-1FA0, 1 available. Siemens single motor module, 6SL3126-1TE32-0AA0, 3 available. Siemens single motor module, 6SL3126-1TE31-3AA3, 1 available. Siemens double motor module, 6SL3126-2TE21-0AA0, 2 available. Siemens active line module, 6SL3136-7TE31-2AA1, 2 available. Siemens sinamics sensor module SMC20, 6SL3055-0AA00-5BA1, 6 available. Siemens motor module, 6SL-3126-1TE31-3AA0, 1 available. Siemens motor module, 6SL-3126-1TE32-0AA4, 1 available. Siemens motor module, 6SL-3126-1TE21-8AA0, 2 available. Siemens control unit, 6SL-3040-0MA00-0AA1, 2 available. Siemens simodrive drives, 6SN1111-0AA00-1FA0, 1 available. Motherboard

Condition: used, Year of construction: 2006, INCLUDING: - Dehumidifying dryer Czmeoboniq - chiller

Condition: like new (used), Year of construction: 2022, operating hours: 8,000 h, Functionality: fully functional, 1,0 St. gebr. Zweikomponenten Spritzgießmaschine Hersteller: ARBURG Typ: 570A2000-400/170 Cyosg3Kxla Baujahr: 2022 Schließkraft: 200 Tonnen Holmabstand 570 x 570 mm Einbauhöhe min. /max.: 350 mm Öffnungsweg: 1.000 mm Schnecken DN 1: 35 mm Max. Hubvolumen: 154 cm³ Spritzteilgewicht in PS: 141 g Schnecke DN 2: 25 mm Max. Hubvolumen: 44 cm³ Spritzteilgewicht in PS: 40 g Steuerung: Selogica Technische Ausstattung anfordern.

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, Functionality: fully functional, Vertical injection molding machine with 3-station rotary indexing table Condition: very good Operating hours: 400 h Machine is ready for operation and can be demonstrated under power Czqcfkq9Qw The machine has been operated in automatic/robotic mode and therefore does not have a CE mark. Ideal for integration into a production line. CE certification may be required.

Condition: excellent (used), Year of construction: 2000, Clamping force 500 kN Opening stroke 350 mm Do22Jj Mold fixing platens 498 x 498 mm Screw diameter 30 mm Machine weight 2,300 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 4,488 h, clamping force: 4,780 kN, screw diameter: 70 mm, clearance between the columns: 850 mm, injection pressure: 1,890 bar, ejector force: 1,340 N, ejector stroke: 180 mm, opening stroke: 710 mm, plate length: 1,270 mm, plate width: 1,220 mm, TEDERIC electric injection molding machine 478 T Year: March 2021 Reference DE478-E2300C Screw diameter : 70 mm L/D ratio : 20 Injectable volume : 1251 cm3 Injection weight in PS : 1138 gr Injection pressure : 1890 bars Screw rotation speed: 220 rpm Injection speed: 160 mm/s Heating power : 33 KW Distance between tie-bars: 850 x 800 mm Dqp7Ht Mould thickness: 320-800 mm Closing stroke: 710 mm Platen dimensions: 1270 x 1220 mm 4 hydraulic cores 3 blowers EUROMAP 67

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, Functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170720 and 170722 (2 identical machines available) Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Cfywbxwqvk Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: used, Year of construction: 2006, Machine Specification ASB-12N/10 Dqqfbj - Machine size (LxWxH): 4.083 x 1.110 x 2.957 mm - Machine weight: 3.628,74 kgs - Standard screw diameter: 44 mm - Injection clamping force: 137 kN - Blow clamping force: 116 kN - Driving Power: 19,3 kW - Oil reservoir capacity 220 L Product specification ASB-12N/10 (Injection Blow) - Cavity number: (1) to (6) - Max. capacity: (0.80) to (0.07) L - Max. thread diameter: (72) to (21) mm - Max. body diameter: (118) to (35) mm - Max. height: (140) to (100) mm - Max. weight: (77) to (12) kgs

Condition: good (used), Year of construction: 2007, 1,0 St. gebr. Spritzgießmaschine Hersteller: DEMAG Typ: SYSTEC60/240-120 Baujahr: 2007 Schließkraft: 60 Tonnen Dqpdi9 Holmabstand 420 x 420 mm Einbauhöhe min.: 125 mm Öffnungsweg: 450 mm Schnecken DN: 25 mm Max. Hubvolumen: 61 cm³ Spritzteilgewicht: 54 g/PS Steuerung: NC5

Condition: good (used), Year of construction: 1991, operating hours: 27,025 h, Functionality: fully functional, machine/vehicle number: 21769, Machine is functional Czfd9V8Ang

Condition: good (used), Year of construction: 2003, Engel ES 1350/250 HL injection molding machine Dqqiid Year of manufacture - 2003 Control - EC 100 Clamping force: 250 tons Injection weight (max): 662 g Plate size (H): 1050 mm Plate size (V): 650 mm Auger diameter : 60 mm Injection volume : 753 ccm Mold height (min): 350 mm Daylight between plates (max) : 1200 mm Opening stroke (max) : 850 mm Ejector stroke: 200 mm Number of cores: 2 Injection pressure: 1480 bar Heating zones: 8 Oil tank capacity: 790 l

Condition: good (used), Year of construction: 2022, clamping force: 3,880 kN, screw diameter: 65 mm, displacement volume: 929 cm³, injection pressure: 1,890 bar, injection weight: 846 g, total length: 6,000 mm, total width: 700 mm, TEDERIC electric injection molding machine 388 T Year: December 2020 Reference DE388-E1700C Screw diameter : 65 mm L/D ratio: 20 Injectable volume : 929 cm3 Injectable weight in PS : 846 gr Injection pressure : 1890 bars Screw rotation speed: 250 rpm Injection speed: 160 mm/s Total power: 89 KW Dqorsn Distance between tie-bars: 750 x 750 mm Mould thickness: 280-750 mm Closing stroke: 650 mm Platen dimensions: 1100 x 1060 mm Machine weight: 18 T 4 hydraulic cores 3 blowers EUROMAP 67

Condition: used, Year of construction: 2007, Machine Specification ASB-15N/10E - All-Electric Model - Machine size (LxWxH): 4.783 × 1.232 × 3.000 mm - Machine weight: 5.850 kgs - Standard screw diameter: 40 mm - Injection clamping force: 150 kN - Blow clamping force: 120 kN - Driving Power: 32,8 kW - Oil reservoir capacity 220 L Product specification ASB-12N/10 (Injection Blow) - Cavity number: (1) to (10) - Max. capacity: (2) to (0.05) L - Max. thread diameter: (72) to (15) mm - Max. body diameter: (118) to (26) mm Cyg8Gvvfze - Max. height: 250 mm - Max. weight: (133) to (13) g

Condition: excellent (used), Year of construction: 2005, Injection molding machine Arburg 570C 2200-1300 Year of manufacture : 2005 Control : Selogica Injection system : Screw diameter : 60 mm Injection weight: 558 g Injection pressure: 2000 bar Injection volume : 664 ccm Closing system : Closing force : 220 tons Dqqh99 Distance between columns: 570x570 mm Size of clamping plates: 795x795 mm Ejector : hydraulic Clamping unit: hydraulic Additional equipment: Hybrid machine: fast, energy efficient Euromap 67 Hydraulic core pulling x 2 Injection system - bimetal Dimensions: Weight: 9300 kg Length/Width/Height: 6.16x1.91x2.39 m

Condition: used, Year of construction: 2011, operating hours: 59,718 h, Used machine in good condition. Available for immediate delivery. - Screw diameter: 65 mm - Injection rate: 3.100 cm³/s - Injection pressure: 1.988 bar - Mould height max: 550 mm - Mould height min: 1050 mm - Platen size (h x v): 730 x 730 mm - Distance between tie-bars (h x v): 730 x 730 mm - Air Valves: 6 Cvi8Bfs2Hy - Core pulls: 2 - Operating hours: 59.718

Condition: excellent (used), Year of construction: 2007, Engel VC 200/40 TECH injection molding machine Year of manufacture - 2007 Control - CC 200 Closing system Closing force [kN] 400 Dimensions of clamping plates (hxv) [mm] 550 x 430 Dqqhzn Min./ max. mold height [mm] min 180 Maximum opening width [mm] 530 Injection system Screw diameter [mm] -30 Injection volume [cm3]-99 Injection pressure [bar]-1451 Electric-hydraulic equipment Pump motor rated power [kW] 15 Dimensions and weight Net weight with control cabinet [t] 2.7 Dimensions (L x W x H) [m] 3.26m x 1.2m x 1.8m

Condition: used, Year of construction: 2011, Used machine in good condition. Available for immediate delivery. Ctegic0Tfu - Operating hours: 57.000

Condition: good (used), Year of construction: 2001, Injection molding machine STORK SX-N 12000-8600 Year of manufacture - 2001 Closing force 12000 kN Spacing between columns 1200 mm X 1200 mm Minimum mold height 500 mm Maximum mold height 1695 mm Clearance between tables 2000 mm Auger diameter 100 mm ( barrier auger ) Bmceganz Injection volume 4800 ccm Injection weight 4363 g Cyo8Kkdh9C Pump motor power 75 kW Heater power 70 kW The machine can be retrofitted with servo drive on special order

Condition: used, Year of construction: 2015, Including: SEPRO Robot - Clamping force: 2.500 kN - Screw diameter: 50 mm - Shot weight max: 359 PS g - Injection rate: 242 (2 pumps) cm³/s - Injection pressure: 2.000 bar - Injection volume: 392 cm³ - Screw L/D ratio: 20 - Nozzle stroke / force max.: 70 / 400 mm / kN - Ejector stroke / force max.: 225 / 90 mm / kN Ctcta8Xzeo - Mould opening stroke max: 600 mm - Mould height min: 550 | 330 mm - Daylight between platens max: 1.150 | 900-1.300 mm - Platen size (h x v): 900 x 900 mm - Distance between tie-bars (h x v): 630 x 630 mm - Mold opening force: 725 kN - Control: SELOGICA direct - Core pulls: 4 - Operating hours: 20.600 - Power: installed max: 68 kW - Dry cycle time: 2,3 - 441 (2 pumps) sec/mm - Weight: 12.200 kg - Dimensions (long x wide x high): 5.988 x 2.082 x 2.207 mm

Condition: used, Year of construction: 2015, Used machine in good condition. Available for immediate delivery. - Screw diameter: 105 / 135 mm - Injection pressure: 1.650 - 2.090 / 1.170 - 1.600 bar - Injection volume: 4.160 / 8.160 cm³ - Screw L/D ratio: 22 / 22 - Clamping force: 17.000 kN - Mould opening stroke max: 2.850 mm - Mould height max: 2.500 mm - Mould height min: 1.600 mm - Daylight between platens max: 4.450 mm - Platen size (h x v): 2.420 x 2.170 mm Ctcrflmud0 - Distance between tie-bars (h x v): 1.850 x 1.415 mm - Mold opening force: 1.230 kN - Dry cycle time: 5,2 / 1.300 sec/mm - Power: installed max: kW

Condition: used, Year of construction: 2019, Used machine in good condition. Available for immediate delivery. - Clamping force: 1.600 kN - Screw diameter: 35 mm - Shot weight max: 104 g - Injection rate: 151 cm³/s - Injection pressure: 1.600 / 2.175 bar - Injection volume: 154 cm³ - Screw speed: 400 rpm - Screw L/D ratio: 23,6 - Nozzle stroke / force max.: 250 / 47 mm / kN - Nozzle stroke max: 160 mm - Mould opening stroke max: 600 mm - Mould height max: 300 mm - Mould height min: 300 mm - Daylight between platens max: 900 mm Dqon2B - Platen size (h x v): 750 x 750 mm - Ejector force: 61 kN - Control: CC200 - Oil tank capacity: 460 l - Power: installed max: 30 kW - Dimensions (long x wide x high): 5.500 x 1.700 x 2.400 mm - Weight: 9.500 kg

Condition: used, Year of construction: 2015, Used machine in good condition. Available for immediate delivery. - Screw diameter: 60 mm - Shot weight max: 956 g Dqomb2 - Injection rate: 283 cm³/s - Injection pressure: 2.360 (max) / 1.960 bar - Injection volume: 763 cm³ - Screw speed: 226 rpm - Screw L/D ratio: 20 - Nozzle stroke / force max.: 110 mm / kN - Nozzle stroke max: 500 mm - Clamping force: 3.500 kN - Mould opening stroke max: 950 mm - Mould height min: 350 mm - Daylight between platens max: 1.300 mm - Platen size (h x v): 1.200 x 1.100 mm - Heating zones: 5 - Ejector force: 83 kN - Oil tank capacity: 980 l - Dimensions (long x wide x high): 7.500 x 2.200 x 2.500 mm - Weight: 24 kg