Used Molding Machine for sale (64,517)

Condition: excellent (used), Year of construction: 2019, Clamping force: 500 kN Opening force: 40 kN Csdpfx Aaexrymls Eepw Opening stroke: 250 mm Screw diameter: 15 mm Includes 2 pcs. WITTMANN temperature control units Includes spare screw 15 mm Includes complete documentation The machine is in very good condition and immediately available from stock!

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, overall weight: 8,700 kg, workpiece length (max.): 165 mm, workpiece diameter (max.): 35 mm, production capacity: 7,200 unit/h, TECHNICAL DETAILS Number of cavities: 6 Max. output: 7,200 bottles/h Product dimensions Max. preform length: 165 mm Preform diameter: 18–35 mm Ring diameter: 27–42 mm Max. neck finish diameter: 38 mm Neck height: 9–27 mm Max. bottle height: 350 mm Max. bottle diameter: 105 mm Max. bottle volume: 2 l MACHINE DETAILS Dimensions & Weight Cjdpfoyrfvgjx Aa Eopw Blow module (L × W × H): 3,293 × 2,325 × 3,196 mm Control cabinet (L × W × H): 1,998 × 602 × 2,410 mm Blow module: 6,300 kg Control cabinet: 1,200 kg Preforms feeder: 1,200 kg Total weight: 8,700 kg Noise level: 83 dB(A) Installed power Installed power: max. 160 kW Reference consumption (1,500 ml bottle): 88 kW Reference consumption (1,000 ml bottle): 62 kW Reference consumption (500 ml bottle): 45 kW Infrared heating (9 zones): 132 kW Operation and feed system: 28 kW Power supply Supply voltage: 230/400 V ±10 % Frequency: 50 Hz ±1 % Cooling water Cooling capacity: 20,000 kcal/h Water temperature: 8–12 °C Flow rate: max. 5 m³/h Pressure: 3–5 bar Compressed air Air consumption at 40 bar (0.25–2 l bottle): 180–700 Nm³/h Air consumption at 7 bar (operating air): 35 Nm³/h

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 201 cm³, injection weight: 183 g, Here, as a dealer for injection moulding machines, we are offering the following well-maintained used injection moulding machine for sale. Of course, we also purchase well-kept injection moulding machines manufactured from 2010 onwards. We have been wholesalers for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Cpjdpfxsyrd U Ue Aa Eew Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from a single German owner xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic shut-off nozzle - Pneumatic valve 1 at BWAP - Pneumatic control for hot runner/cold runner - Reject sorting chute - Nozzle protection door – ejector area safety door can be folded up - Euromap interface 18 on FWAP - Electric ejector plate in BWAP - Hydraulic auxiliary unit for hydraulic core pulls - Injection-compression moulding circuit - 2 x hydraulic core pull - 8-circuit water manifold - 8 heating zone controllers for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets: 2 x CEE 16A / 1 x CEE 32A - Signal interface EUROMAP 67 for robot - Start-up circuit, QA package, cycle time analysis, cycle memory, event log - BluePOWER package - Graphic analysis package, trend chart - Interface for temperature control unit Main language: German Injection unit: Screw diameter: 40 mm Shot weight: 183 g/PS Injection pressure: 1,860 bar Shot volume: 201 cm³ Clamping unit: Clamping force: 80 tons / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould height: 250 mm Max. platen distance: 750 mm Ejector stroke / force: 150 mm / 125 kN Clamping unit fully electric Warranty: Guarantee valid up to first commissioning Loading/Shipping: Free loading onto buyer's truck or free delivery within Germany (shipping charges apply) Available from our warehouse in Hannover, Germany.

Condition: defective spare-parts repository (used), Year of construction: 1998, Used ARBURG 320 C 500 injection molding machine for sale. The equipment is not working, incomplete, being sold for parts! Cpodpoyrd D Nofx Aa Eew

Condition: repair required (used), Year of construction: 1999, The machine is currently not operational, the control cabinet is incomplete! Cpsdpsyrdzuofx Aa Eow

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, clamping force: 550 kN, total length: 4,220 mm, total width: 1,105 mm, total height: 2,040 mm, Awaiting refurbishment at our headquarters in Northamptonshire is this BOY 55A injection moulding machine, fitted with the Procan CT Controller. Any machines awaiting refurbishment (or undergoing refurbishment) with us can be reserved with a 10% deposit and we then prioritise the refurbishment and aim to have the machine available for inspection within 8 weeks from order. Refurbished machines from STV Machinery undergo a comprehensive test procedure during which every function of the machine is tested and if necessary repaired. A production run of at least 5000 fault free cycles prior to sign off ensures trouble free operation once delivered. Machines are ultra clean and cosmetically as good as we can get them. We guarantee our refurbs are delivered fault free and leak free. Prices shown are ex-works, but we can quickly provide DAP (Delivered at Place) Incoterm pricing on request. We can take out the hassle and additional costs of purchasing machinery within the UK and EU. Contact us with a potential delivery address and we’ll do the rest. Cjdpfx Ajypcltsa Eepw *The video shown in this listing is of a previously refurbished BOY 55A which is very similar to the BOY 55A machine we are currently refurbishing. Please contact the team if you would like to see the machine in person.

Year of construction: 2021, condition: used, machine/vehicle number: 202112108066695, Max. clamping force: 10,800 kN, tie bar spacing: 1,260x1,100 mm, min./max. mold installation height: 500/1,200 mm, ejector force: 230 kN, max. opening stroke: 2,400 mm, mold opening travel: 1,900/1,200 mm, screw diameter: 110 mm, max. motor output: 112 kW, machine weight: approx. 48,000 kg, recorded operating hours: 19,413, recorded load hours: 7,526, equipped with KEBA i2985 control, Sepro Strong 50TE handling system, transport conveyor from MB type PALL year 2022 approx. 700x120 cm, partial mesh enclosure (WITHOUT: PIOVAN dosing unit, WITHOUT temperature control units) Cpedpjyn Nh Eofx Aa Eew

Condition: used, Year of construction: 2016, machine/vehicle number: 61024744, clamping force: 800 kN, This KraussMaffei injection moulding machine 80-180 XC from the year 2014, including a Yaskawa MH 24 robot and a loading unit, is being auctioned in our industrial auction "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo" in Babenhausen until 10.03. The auction takes place on our RESTLOS online platform. Further machine details: Automated injection moulding and post-processing system, consisting of a KraussMaffei injection moulding machine, multiple Yaskawa Motoman industrial robots, laser marking and UV curing systems as well as comprehensive conveyor, cleaning, and automation technology in 2 automation cells. These must be completely dismantled. Technical data Injection moulding machine Manufacturer: KraussMaffei Model: 80-180 CX Year of manufacture: 2016 Machine no.: 61024744 Clamping force: 80 t Screw diameter: 30 mm Max. injection pressure: 2,025 bar Max. cylinder temperature: 375 °C Voltage: 3 × 400 V / 50 Hz Rated current: 248 A Main fuse: 250 A Design: 4-column clamping unit Insulated plasticising cylinder Integrated control cabinet KraussMaffei hand-held control device (teach pendant) Industrial robots Yaskawa Motoman MH24 Year: 2015 Payload: 24 kg Control: DX200 Yaskawa Motoman HP20D Year: 2015 Payload: 20 kg Control: DX100 2 × Yaskawa Motoman MH6 Year: 2014 Payload: 6 kg Control: DX100 All robots: 3 × 400 V / 50/60 Hz Automation cells KraussMaffei Automation robot cell IR 1200 F/M, year 2016 Robot Technology automation cell, year 2016, with rotary indexing table and camera inspection Further system components SSR Engineering EVO 307 DR laser marking system SSR MOD 1-307dr UV curing system Beltron UV dryer BE 35 / 160W Corona treatment device TRISTAT TR 30 SIMCO ionisation unit Dr. Escherich cleaning systems (IOCLEAN / RollerClean) Material handling FarragTech CARD 20S granulate dryer Material distributor / vacuum conveyor lines Conveying technology Schuma PRO-ZR-1500 conveyor system Several belt conveyors and modular chain conveyors Stainless steel chutes and scrap containers Csdpfx Aasyn Aqto Eopw Temperature control & media Temperature control units with cooling water distribution Stainless-steel cooling water distributors with pressure gauges Compressed air and water filtration systems Notes This lot comprises 2 systems, which are positioned directly next to each other. All associated peripherals are included with this lot. Please use the inspection appointment Without tools, materials, and decorations, unless expressly mentioned Dismantling and loading to be arranged by the buyer Delivered as depicted, function not tested Other positions shown in photos are not included Completeness not guaranteed.

Condition: used, Year of construction: 2014, clamping force: 6,500 kN, Demag System 200/500 This Sumitomo Demag injection moulding machine Systec 650/1020-2300 from 2014 is being auctioned—including the conveying system and a hot stamping unit—in our industrial auction, "Injection Moulding Machines – DEMAG System, KraussMaffei, Sumitomo," taking place in Babenhausen until 10.03. The auction is held on our RESTLOS online platform. Machine inspections can be scheduled by appointment for Monday, 09.03.2026 from 10:00 to 11:00 am. Further details about the machine: Complete large-scale injection moulding system, consisting of a Sumitomo (SHI) Demag injection moulding machine, Sepro top-entry linear robot, Stäubli clamping and coupling systems, hot stamping/foil transfer station, as well as comprehensive temperature control and conveying equipment. Technical data Injection moulding machine Manufacturer: Sumitomo (SHI) Demag Model: Systec 650/1020-2300 Year of manufacture: 2014 Machine number: 80930051 Control unit: NC5 Plus Clamping force: 6,500 kN (650 t) Tie-bar distance: 1,020 mm Injection unit: 2300 Screw diameter: 60 mm L/D ratio: 20 : 1 Voltage: 400 V / 50 Hz Operating hours: PLC: approx. 103,846 h Drives: approx. 50,889 h Heater: approx. 71,072 h Machine cycles: approx. 4,942,086 Linear Robot / Part Handling Manufacturer: Sepro Robotique / Sumitomo Demag Model: S5X-35 Year of manufacture: 2014 Weight: approx. 711 kg Max. pressure: 7 bar Type: top-entry linear robot (X, Y, Z axes with rotary axes) Operation: Sepro teach pendant / Integration into NC5 control Further automation components - Stäubli QMC122 magnetic quick-clamping plates (2 units) - Stäubli multi-coupling systems for media connections - Stäubli industrial robots (TX/RX series, handling) - Hot stamping/foil transfer station with rotary table and Siemens SIMATIC HMI - Priamus FillControl process monitoring system - Gammaflux hot runner controller - Dr. Escherich ESUC 81 ionization/cleaning unit Temperature control & material handling - Multiple Wittmann Tempro plus D140 temperature control units (approx. 10–12 units) - Chilled water manifold plates with flow indicators - Koch Technik H565 material loader Cedjyn Acpspfx Aa Eopw - Koch Technik SGM01 metal separator Conveying equipment - M.A.i conveyor belt for part discharge - VTW conveyor belt for sprue discharge Key components overview: - Sumitomo (SHI) Demag Systec 650/1020-2300 injection moulding machine - Sepro S5X-35 linear robot with control system - Stäubli quick-clamping and coupling systems - Hot stamping/foil transfer automation cell - Process monitoring system (Priamus) - Hot runner control (Gammaflux) - Wittmann temperature control units - Koch material handling equipment - Part and sprue conveyor belts Notes - Please make use of the inspection appointment - Without moulds, materials, and decorations unless explicitly mentioned - Dismantling and loading to be handled by the buyer - Sold as pictured; functionality untested - Does not include any other items that may be shown in images - Completeness not verified.

Condition: excellent (used), Year of construction: 1999, operating hours: 48,400 h, 1.0 used blow molding machine Manufacturer: Fischer - W. Müller Model: FMB 3-120 Year: 1999 Clamping force: 120 tons Extruder type: 120/24 WT Accumulator head: BFKS25 (approx. 17.75 kg) This machine is capable of producing barrels up to 200 liters in size. Cpjdpfx Aaoynutmj Ejw Video available!

Condition: used, Year of construction: 2000, functionality: fully functional, Everything in perfect condition! Immediately operational! Transport available! Cpodpfx Aasyruccj Eow Clamping force: 500 kN Maximum mold opening force: 35 kN Mold platen size: 446 mm x 446 mm Distance between tie bars: 270 mm x 270 mm Mold opening stroke: 350 mm Minimum mold height: 225 mm Maximum daylight: 575 mm Hydraulic ejector stroke: 125 mm Ejector force forward/backward: 30 kN Injection unit – screw diameter: 25 mm L/D ratio: 24 Injection pressure: 2500 bar Shot volume: 54 cm³ Shot weight: 49 g Injection rate: 56 cm³/s Injection stroke: 300 mm Screw speed: 37 m/min Operating voltage: 400 V, 3-phase Control voltage: 24 V Motor heating rated current: 51 / 44 A Total rated current: 95 A Total connected load: 56 kW Installed heating capacity: 9.4 kW Thermal storage capacity: 120 l Machine dimensions approx. 3350 x 1000 x 1500 mm Weight: 2700 kg

Condition: as good as new (ex-display), Year of construction: 2025, SHIBAURA EC280SXIII-i10A Electric Injection Moulding Machine Manufacturer: Shibaura Machine (formerly Toshiba Machine) Model: EC280SXIII-i10A Year of manufacture: 2025 Type: Fully electric injection moulding machine Shibaura (Toshiba) injection moulding machines are among the most precise on the market. The SXIII series is characterised by high accuracy, process stability and extremely low energy consumption. This machine is ideally suited for the production of precision technical components as well as for use in the automotive, electronics, and medical industries. Technical Specifications Clamping Unit: - Clamping force: 2800 kN - Platen dimensions: 1030 × 960 mm - Distance between tie bars: 730 × 660 mm - Minimum mould height: 250 mm - Maximum mould height: 750 mm - Maximum opening stroke: 1350 mm - Maximum ejector stroke: 150 mm Injection Unit: - Screw diameter: 50 mm - Injection volume: 490 cm³ Cpjdpoyrr Iiofx Aa Eow - Shot weight for PS: 450 g - Injection pressure: 2040 bar Electrical Equipment: - Rated motor power: 41.2 kW - Heater power: 15.9 kW This fully electric machine offers: - High process repeatability - Low energy consumption - Very quiet operation - No hydraulic system Dimensions and Weight: - Net weight: 12.5 t - Machine dimensions: 6.7 × 2.0 × 2.2 m

Condition: excellent (used), Year of construction: 2012, Krauss Maffei Injection Moulding Machine KM 1300-12000 MX Manufacturer: KraussMaffei Model: KM 1300-12000 MX Year of manufacture: 2012 The machine is designed for thermoplastics processing and is equipped with a complete plasticizing unit in a version with abrasion protection. Technical specifications Clamping unit - Clamping force: 13,000 kN - Mold opening force: 910 kN - Dimensions of mounting platens: 2210 × 1910 mm - Tie bar spacing: 1570 × 1270 mm - Ejector stroke: 350 mm - Ejector force: 250 / 125 kN Injection unit - Screw diameter: 105 mm - Injection pressure: 2296 bar - Injection volume: 5195 cm³ - Shot weight for PS: 4728 g - Injection rate: 856 cm³/s Plasticizing parameters - Screw speed: 103 / 145 rpm - Plasticizing throughput (PS): Cjdpfx Aasyrrwko Eopw • standard speed: 122 g/s • increased speed (option): 171 g/s Electro-hydraulic equipment - Rated pump motor power: 132 kW - Installed heater power: 71 kW - Number of barrel heating zones: 7 - Dry cycle time according to Euromap 6: 765 cycles/h - Oil tank capacity: 2440 l Dimensions and weight - Net weight with control cabinet: 70 tons - Installation dimensions: 13.03 × 3.65 × 2.82 m

Condition: excellent (used), Year of construction: 2010, operating hours: 6,000 h, functionality: fully functional, machine/vehicle number: 38321-38322-38323-38324, clamping force: 220 kN, screw diameter: 22 mm, opening stroke: 200 mm, total length: 1,916 mm, total width: 815 mm, total height: 2,927 mm, overall weight: 1,090 kg, input voltage: 400 V, Equipment: documentation/manual, Used in the biomedical field for a single product type. 4 units available. Codpfxsx H S Ums Aa Eepw

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 161729, clamping force: 1,000 kN, screw diameter: 40 mm, injection weight: 158 g, ejector force: 40,000 N, total length: 4,225 mm, total width: 1,370 mm, total height: 1,200 mm, overall weight: 3,080 kg, heating capacity: 5.5 kW (7.48 HP), pump power: 18,500 W, power: 24.3 kW (33.04 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 380 V, input current: 96 A, Equipment: documentation/manual, We are offering this used Arburg 370M 1000-250 injection moulding machine, year of manufacture 1994. Serial number: 161729 Year: 1994 Operating voltage: 380 V 3~ 50 Hz Control voltage (230 V): 220 V ~ 50 Hz Cpodpfx Aeyrczgsa Ejw Control circuit voltage: 24 V = Total rated current: 96.00 A Total connected load: 55.0 kW Drive upgraded to xD card! If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2005, Injection Moulding Machine Manufacturer: Krauss Maffei Model: KM350 /1900 C2 Year of manufacture: 2005 Clamping force: 3,500 kN Mould opening force: 220 kN Moving platen drive force: - Opening: 105 kN - Closing: 95 kN Mounting platen (W x H): 1,060 x 1,095 mm Clear distance (W x H): 710 x 710 mm Mould opening stroke: 920 mm Minimum mould installation height: 380 mm Maximum daylight: 1,300 mm Codpfx Aasxu Uvaj Eepw Ejector stroke: 250 mm Ejector force forward/backward: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Temperature control zones for barrel heating: 6 Dry cycle time: 1,550 1/h Oil capacity: 720 litres Dimensions and weights: Net weight with control cabinet: approx. 16.0 t L/W/H: 6,510 x 2,040 x 2,380 mm Maximum mould weight: 4,780 kg Injection unit: Rated shot volume: 1,900 Screw diameter: 70 mm Injection pressure: 1,778 bar Stroke volume: 1,047 cm³ Shot weight for PS: 953 g Injection rate: 527 cm³/s Screw speed standard/option: 285/349 rpm Screw drive output (standard/Stage 1): 95 PS Screw drive output (option/Stage 2): 117 PS Nozzle contact force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color display and 3.5-inch floppy disk drive for data backup Plasticising: 1 complete thermoplastic plasticising unit in wear-resistant version, screw diameter 70 mm with o non-return valve and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm

Condition: excellent (used), Year of construction: 2016, operating hours: 7,278 h, functionality: fully functional, clamping force: 550 kN, screw diameter: 32 mm, displacement volume: 96 cm³, injection pressure: 2,127 bar, Dr. Boy 55 A DUROPLAST (nur 7.278 h) Manufacture year: 2016 Operating hours: 7,278 Stunden Screw: 32 Duroplast mm Injection pressure: 2127 bar Stroke volume: 96 cm³ Clamping Force: 55 t Tie bar distance: 360 x 335 mm Mould installation height min.: 250 mm Plate distance max.: 650 mm Dimensions: 3200 x 1200 x 2000 mm Eeight: 2430 kg Connected load: 11 kW THERMOSET Granule injection unit, Corepuller, Airvalve, Hotrunner 4x price: on request Codsyq Igfjpfx Aa Eepw contact: Mr. Ralf Schulz

Condition: ready for operation (used), Year of construction: 1997, Stock-No. 13602 Manufacturer Krauss Maffei Type of machine KM 650 – 8000 CM Year 1997 Working hours 80000 h Controlversion MC 3-F Screentext German Location Eschweiler - Germany Clamping unit: Clamping force 6500 kN Mould opening force, max. 346 kN Travel force movable platen opening 169 kN Travel force movable platen closing 144 kN Size of mould platens (h x v) 1704 x 1700 mm Distance between tie bars (h x v) 930 x 930 mm Mould opening stroke 1150 mm Cpsdpfxsub S R Hs Aa Ejw Mould height min 600 mm Max. daylight 1750 mm Hydraulic ejector - stroke 250 mm Ejector force 226 kN Injection unit: Screw diameter 130 mm Ls/D ratio 20 Injection pressure 1296 bar Stroke volume 6172 ccm Shot weight (PS) 5617 gr. Injection rate 1540 ccm/s Screw speed 138 1/min Plasticising rate max. 238 g/s Nozzle pressure 246 kN Electric and Hydraulic Equipment: Nominal capacity of pump motor 132 kW Installed heating capacity 70 kW Adjustable barrel heating zones 7 Dimensions and weights: Dimensions of the machine ca. 12,00 x 2,80 x 2,70 m Total machine weight 43000 kg Accessories: - Anti vibration pads Additional Options: - 1 x air valve - 2 x core pulls on movable plate - 2 x core pulls on fix plate - 8 x hotrunner controller - Robot interface according to Euromap 67

Condition: good (used), Year of construction: 2001, clamping force: 250 kN, screw diameter: 18 mm, clearance between the columns: 220 mm, displacement volume: 20 cm³, injection pressure: 2,500 bar, injection weight: 18 g, General information Year of manufacture: 2001 Control system: Selogica Weight: 2,000 kg Dimensions (L × W × H): 2.9 × 0.9 × 1.9 m Clamping unit Clamping force: 25 t Tool clamping system: 250 / … Plate dimensions: 400 × 400 mm Clearance between tie bars: 220 × 220 mm Maximum distance between plates: 425 mm Injection unit Injection unit: … / 60 Screw diameter: 18 mm Screw L/D ratio: 24.5 Specific injection pressure: 2,500 bar Injection volume: 20 ccm Shot weight: 18 g Cedpfx Aeyqx Hvoa Ejpw Ejector Ejector force: 18 kN Ejector stroke: 95 mm

Condition: excellent (used), Year of construction: 2011, functionality: not functional, clamping force: 500 kN, screw diameter: 30 mm, displacement volume: 85 cm³, injection pressure: 2,000 bar, injection weight: 77 g, mold height (min.): 200 mm, General data Year of manufacture: 2011 Csdjyqwf Dspfx Aa Ejpw Clamping unit Clamping force: 50 t Mould clamping system: 50/ … Platen size: 446 × 446 mm Mould height: 200 mm Opening stroke: 350 mm Maximum platen distance: 550 mm Ejector force: 30 kN Ejector stroke: 125 mm Injection unit: … / 1350 Screw diameter: 30 mm Injection volume: 85 ccm Shot weight: 77 g Specific injection pressure: 2,000 bar

Condition: used, Year of construction: 2016, Injection moulding machine Type: Arburg 820S 4000-4600 Year of manufacture: 2016 Injection volume for PP = 2850 ccm Cpjdpfsyqwfdjx Aa Eew Injection weight for PP approx. 2450 g The machine is offered without peripherals, handling equipment or safety fencing – purely the machine itself.

Condition: good (used), Year of construction: 2007, clamping force: 5,000 kN, screw diameter: 85 mm, displacement volume: 2,128 cm³, injection pressure: 1,574 bar, injection weight: 1,937 g, mold height (min.): 450 mm, Battenfeld HM 500/3400 Injection Moulding Machine Clamping force: 500 t Year of manufacture: 2007 Injection weight: 1,937 g Injection unit .../3400 Screw diameter: 85 mm Specific injection pressure: 1,574 bar Injection volume: 2,128 ccm Injection weight: 1,937 g Screw L / D ratio: 22 Clamping system 500/... Clamping force: 500 t Cpsdpfsyqv Hmex Aa Eow Platen dimensions: 1,590 x 1,470 mm Tie bar spacing: 1,000 x 800 mm Mould height: 450 mm Opening stroke: 1,150 mm Max. platen distance: 1,600 mm Ejector stroke: 250 mm General data: Weight: 25,000 kg Dimensions [L x W x H] [m]: 7.3 x 2.5 x 2.6 Equipment: - 1 x pneumatic valve - 2 x hydraulic core pulls - Euromap 67 interface - bimetallic injection unit

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 2007057201, Ser. No.: 2.000.102 Absolute cycle counter: C120 = 048433176 Operating pressure (bar): 210 Injection force (kN): 693 Closing force (kN): 2400 Opening stroke (mm): 0-510 Cpodeyabfgspfx Aa Eew Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75

Condition: used, Year of construction: 2005, Technical details: screw size: 70 mm injection shot weight in Polysterol: 687 g/PS closing pressure: 3000 kN weight of the machine ca.: 19,4 t PreHeating unit and airsoaking unit is not in package !! * Cedpfx Aaswftr Dj Espw

Condition: like new (used), Year of construction: 2007, operating hours: 27,000 h, clamping force: 6,500 kN, KraussMaffei KM650-3500 C2 injection molding machine for sale. The machine is in very good condition. It has only been operated in single-shift production and used exclusively for small batch and sample production. A new hydraulic pump was recently installed (approx. 300 operating hours ago). - 27,000 operating hours - Year of manufacture: 2007 - MC4 control system - Core pulls on both sides - Tie bars and guideways are undamaged and in like-new condition - Robot with longitudinal take-out LR300 and conveyor belt - Proportional valves, HPS screw, bimetallic cylinder - Total weight approx. 30,000 kg - Opening stroke: 1,150 mm Adapter plates are also available from us. Cpjdjyn Sc Eepfx Aa Ejw Inspection under power is possible. Other accessories such as Motan dryer, chiller unit, and much more available upon request. The machine can be dismantled and loaded by us upon agreement. We look forward to your inquiry.