Used injection molding machines with a clamping force over 10,000 kN for sale (46)

Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1300-12000 MX + LRX 350 ROBOT Year of manufacture: 2015 | Clamping force: 1300 tons | Control: MC6 Hydraulic injection molding machine KraussMaffei KM 1300-12000 MX from 2015, equipped with a KraussMaffei LRX 350 linear robot. Rjdpj Af Ndqsfx Apdech The machine features a two-platen hydraulic-mechanical clamping system, an abrasion-resistant plastification unit, and an MC6 control system with a 19-inch touchscreen. TECHNICAL DATA 1. CLAMPING UNIT Clamping force: 13,000 kN / 1300 tons Clamping system: hydraulic-mechanical, two-platen Design: 4 tie bars and 4 adjusting units Mounting plate dimensions: 2210 × 1910 mm Tie bar spacing: 1570 × 1270 mm Opening stroke: 2350 mm Maximum platen opening: 3050 mm Minimum mold height: 700 mm Maximum mold height: 1400 mm Ejector stroke: 350 mm Ejector force: 250 / 125 kN 2. INJECTION UNIT Unit type: 12000 Screw diameter: 105 mm Injection volume: 5195 cm³ Injection shot weight (PS): 3689 g Maximum injection pressure: 2296 bar Maximum injection speed with accumulator: 150 mm/s Injection rate with accumulator: 1299 cm³/s Maximum screw speed: 144 rpm Plastification rate (PS): 130 g/s Abrasion-resistant plastification unit PV injection unit adjustment 3. KRAUSSMAFFEI LRX 350 LINEAR ROBOT Manufacturer: Krauss Maffei Model: LRX 350 Type: linear, servo-driven robot Payload: up to 35 kg Part removal on the side opposite the operator Range of motion: X-axis: 1200 mm Y-axis: 1000 / 1000 mm (telescopic) Z-axis: 3500 mm Drives for X, Y, Z axes: servo 4. CONTROL SYSTEM KraussMaffei MC6 19" color touchscreen Industrial computer Real-time Ethernet communication ProcessDesigner process visualization Machine diagnostics Adjustment and monitoring of injection parameters 5. HYDRAULIC AND ELECTRICAL SYSTEM Pump motor power: 132 kW Heater power: 75 kW Number of heating zones: 7 Oil tank capacity: 2440 l 6. DIMENSIONS AND WEIGHT Length: 13,650 mm Width: 3650 mm Height: 2820 mm Machine weight: approx. 70,000 kg / 70 tons

Condition: excellent (used), Year of construction: 2013, KRAUSSMAFFEI KM 1600-17200 MX Blu Power Injection Molding Machine Year of manufacture: 2013 Clamping force: 16,000 kN (1,600 tons) Control system: KraussMaffei MC6 TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: KraussMaffei - Model: KM 1600-17200 MX Blu Power - servo - Year of manufacture: 2013 - Machine type: hydraulic injection molding machine for processing thermoplastic materials - Clamping system: fully hydraulic - Clamping force: 16,000 kN (1,600 tons) - Injection unit: 17200 - Control system: KraussMaffei MC6 2. Clamping unit - Clamping force: 16,000 kN (1,600 tons) - Opening force: 1,120 kN - Dimensions of the mounting plates (H × V): 2,550 × 2,100 mm - Column spacing (H × V): 1,870 × 1,420 mm - Opening stroke: 2,700 mm - Minimum mold height: 700 mm - Maximum mold height: 1,600 mm - Maximum daylight: 3,400 mm - Ejector stroke: 350 mm - Ejector force (forward / backward): 300 / 150 kN 3. Plasticizing unit - Complete plasticizing unit for thermoplastics - Screw diameter: 135 mm - Screw length ratio L/D: 23 - Plasticizing unit in abrasion-resistant version - Screw check valve - Open nozzle 4. Injection unit - Injection unit type: 17200 Rodpfj Af I U Nex Apdjch - Screw diameter: 135 mm - Injection volume: 9,662 cm³ - Injection shot weight (PE): 6,860 g - Maximum injection pressure: 1,784 bar - Nominal screw speed: 81 rpm - Maximum screw speed: 100 rpm 5. Hydraulic and electrical system - Main motor power: 160 kW - Installed heater power: 93 kW - Number of heating zones: 7 - Number of dry cycles according to EUROMAP 6: 648 cycles/h - Hydraulic oil tank capacity: 2,400 l 6. Machine dimensions and weight - Length: 14,170 mm - Width: 4,040 mm - Height: 2,930 mm - Net weight including control cabinet: 92,000 kg (92 tons)

Condition: excellent (used), Year of construction: 2008, DEMAG System 1500/1500-16000 injection molding machine Wittmann W753C robot Year of manufacture: 2008 Clamping force: 15,000 kN (1,500 tons) TECHNICAL SPECIFICATIONS 1. Basic data - Manufacturer: DEMAG - Model: System 1500/1500-16000 - Year of manufacture: 2008 Rcjdpe Af Id Hefx Apdsh - Clamping force: 15,000 kN (1,500 tons) - Injection unit: 16000 - Additional equipment: Wittmann W753C linear robot 2. Clamping unit - Clamping force: 15,000 kN (1,500 tons) - Mounting plate dimensions (H × V): 2,150 × 1,880 mm - Column spacing (H × V): 1,500 × 1,250 mm - Minimum mold height: 700 mm - Maximum mold height: 1,400 mm - Maximum opening: 2,900 mm 3. Plasticizing unit and injection unit - Injection unit: 16000 - Screw diameter: 145 mm - Injection volume: 10,981 cm³ - Injection shot weight (PS): 9,880 g - Maximum injection pressure: 1,454 bar 4. Hydraulic and electrical system - Rated power of the pump motor: 165 kW - Heater power: 97 kW 5. Machine dimensions and weight - Length: 14,400 mm - Width: 3,400 mm - Height: 2,900 mm - Net machine weight: 74,000 kg (74 tons) - Weight of the additional unit identified in the documentation as the control cabinet: 21,000 kg (21 tons) - Total weight according to the provided data: approximately 95,000 kg (95 tons)

Condition: excellent (used), Year of construction: 2023, operating hours: 4,050 h, functionality: fully functional, machine/vehicle number: AEFM6009, clamping force: 10,000 kN, screw diameter: 110 mm, clearance between the columns: 1,100 mm, column diameter: 180 mm, displacement volume: 4,941 cm³, injection pressure: 1,840 bar, injection weight: 4,546 g, mold height (min.): 450 mm, ejector force: 289,000 N, ejector stroke: 350 mm, opening stroke: 1,200 mm, plate length: 2,350 mm, plate width: 1,570 mm, plate height: 1,570 mm, total length: 11,300 mm, total width: 2,550 mm, total height: 3,400 mm, overall weight: 44,000 kg, heating capacity: 51 kW (69.34 HP), pressure: 178 bar, number of injections: 1, pump power: 136,000 W, power: 195 kW (265.13 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 371 A, Equipment: documentation/manual, The machine has relatively few operating hours and is in very good condition. It has been well-maintained. The machine processes only ABS, PP, and PS. It is controlled by a Beckhoff system. The machine is equipped with extensive additional features, including 3 air valves, two hydraulic valves, a servo valve for hydraulic table movement, 24 tool heating zones, a water manifold with 6 zones, a screw heater insulation, hydraulic screw rotation for die replacement, a die with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. In addition, water blocks are fitted to both the moving and stationary tables, each with 8 outlets. Furthermore, a number of spare parts are included with the machine, such as a complete die, a screw die, heaters, temperature sensors, and various seals for the hydraulics, as well as a self-filtration filter, a die wrench, and auxiliary ejector rods. The machine is being sold without the robot shown in the pictures. Rjdpoznll Sjfx Apdoch

Condition: used, Year of construction: 2019, Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 Injection Moulding Machine General Information Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Country of Origin: Germany CE Marked: Yes Availability: Immediately available Location: Belgium ----- Technical Specifications Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Control System: NC5 Plus / C-Dias Machine Weight: 67,600 kg Maximum Operating Pressure: 210 bar Power Supply: 3 × 400 V / 50 Hz Connected Load: 204 kVA Rated Current: 552 A ----- Operating Hours PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Heating Hours: 29,982.7 hours ----- Rcjdpj Afbz Ujfx Apdjh Description Well-maintained Sumitomo (SHI) Demag EL-EXIS SP 1000/1195-6300 all-electric high-performance injection moulding machine built in 2019. The EL-EXIS series is specifically designed for applications requiring exceptional productivity, fast cycle times, high precision and reduced energy consumption. It is particularly suitable for packaging applications, thin-wall products and technical mouldings. The machine is equipped with the advanced NC5 Plus / C-Dias control system and remains in very good operating condition. Inspection under power can be arranged by appointment. Please Note: The information was obtained to the best of our abilities and - where possible - from the manufacturers. It is given in good faith, however, its accuracy cannot be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. Specific tooling must be requested before purchasing because in most cases the offered machines are still in production when the pictures were taken. We advise you to check any vital details! Manufacturer: Sumitomo (SHI) Demag Model: EL-EXIS SP 1000/1195-6300 Year of Manufacture: 2019 Availability: Immediately available Location: Belgium Clamping Force: 10,000 kN (1,000 tonnes) Screw Diameter: 119.5 mm Injection Unit: 6300 International Size: 10000 / 6300 Machine Weight: 67,600 kg PLC / SPS Hours: 37,916.5 hours Drive Hours: 25,326.0 hours Maximum Operating Pressure: 210 bar

Condition: good (used), Year of construction: 2013, clamping force: 13,000 kN, _KRAUSSMAFFEI KM 1300-8100 MX_ Year: 2012 Working hours: 52,000 h Clamping force: 1,300 tons (13,000 kN) Controller: MC5 _CLAMPING UNIT_ • Tie bar distance (H × V): 1,570 × 1,270 mm Rcodpfe Agcuqsx Apdsh • Platen dimensions: 2,210 × 1,910 mm • Opening stroke: 2,350 mm • Mould height min./max.: 700–1,400 mm • Max. daylight: 3,050 mm • Max. mould weight: 29,000 kg _INJECTION UNIT_ • Screw diameter: 95 mm • Shot volume: 3,721 cm³ • Shot weight (PS): 2,642 g • Injection pressure: 2,173 bar • Injection rate: 659 cm³/s • Plasticising capacity: 105 g/s _ADDITIONAL EQUIPMENT_ ✅ Sepro Robot 4050 S3 Trans ✅ 6× Hydraulic core pullers (3+3) ✅ 6× Hydraulic shut-off nozzles ✅ 16× Hot runner control zones ✅ 2× Air valves ✅ Euromap 67 robot interface ✅ Anti-vibration pads _DIMENSIONS & WEIGHT_ • Dimensions: approx. 13 × 4 × 3 m • Machine weight: 64,000 kg • Pump motor: 110 kW • Heating capacity: 59 kW

Condition: excellent (used), Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, machine/vehicle number: ADKL2001, clamping force: 14,000 kN, screw diameter: 120 mm, clearance between the columns: 1,450 mm, column diameter: 240 mm, displacement volume: 7,351 cm³, injection pressure: 1,200 bar, injection weight: 6,983 g, mold height (min.): 650 mm, ejector force: 350,000 N, ejector stroke: 380 mm, opening stroke: 1,450 mm, plate length: 2,950 mm, plate width: 2,000 mm, plate height: 2,000 mm, total length: 14,100 mm, total width: 3,400 mm, total height: 3,600 mm, overall weight: 75,000 kg, heating capacity: 60 kW (81.58 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 266 kW (361.66 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 520 A, Equipment: documentation/manual, The machine has seen limited use and is in very good condition. It has been well maintained. The machine only processes ABS and PP. It features a Beckhoff control system. The machine is equipped with extensive additional equipment, including 3 pneumatic valves, two hydraulic valves, a servo valve for table movement hydraulics, 32 tool heating zones, a water manifold with 8 zones, a screw heating element insulation, a hydraulic screw rotation system for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a Euro-map for the robot, a door with automatic opening via an electric motor, and an electrical cabinet with sockets. Additionally, water blocks are installed on both the moving and stationary tables, each with 8 connections. Furthermore, a set of spare parts is included, such as a complete torpedo, a screw nozzle, heaters, temperature probes, and specific hydraulic seals, as well as a self-filtration filter and a torpedo wrench, and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not the subject of this advertisement, it can be purchased separately and added to the machine. It was used with the machine and is adapted for it. Rcsdpfx Apozna T Rsdjh

Condition: good (used), Year of construction: 2016, clamping force: 13,000 kN, Equipment: documentation/manual, _KRAUSSMAFFEI KM 1300 MX – SP 8100_ _Screw Ø105 mm_ _CLAMPING UNIT_ • Clamping force: 13,000 kN / 1,300 t • Mold opening force: 910 kN • Moving platen force (open/close): 159 / 153 kN • Platen dimensions: 2,150 × 1,910 mm • Tie bar distance (H × V): 1,550 × 1,250 mm • Opening stroke: 2,350 mm • Mold height (min./max.): 700 / 1,400 mm • Maximum daylight: 3,050 mm • Ejector stroke: 350 mm • Ejector force (forward/backward): 250 / 125 kN • Optional mold height (min./max.): 950 / 1,650 mm • Daylight with increased mold height: 3,300 mm _INJECTION UNIT – SP 8100_ • Screw diameter: 105 mm • L/D ratio: 23 • Max. injection pressure: 1,778 bar • Stroke volume: 4,546 cm³ • Shot weight (PS): 4,137 g • Injection flow rate: 805 cm³/s • Screw speed (nominal/max.): 126 / 159 rpm • Plasticizing rate PS (nominal/max.): 147 / 187 g/s • Plasticizing rate PE (nominal/max.): 116 / 147 g/s Rcodpfeztpkpex Apdeh • Nozzle contact force: 166 kN _ELECTRO-HYDRAULIC EQUIPMENT_ • Pump motor power: 110 kW • Installed heating capacity: 59 kW • Barrel heating zones: 7 • Dry cycle rate (Euromap 6): 761 cycles/h • Dry cycle time (Euromap 6): 4.7 s • Oil tank capacity: 1,500 l _DIMENSIONS & WEIGHT_ • Net weight incl. cabinet: 77 t • Dimensions (L × W × H): 12.09 × 3.66 × 2.67 m • Maximum mold weight: 29,000 kg _ELECTRIC SCREW DRIVE_ • Screw drive power: 117 kW • Screw speed (nominal/max.): 123 / 193 rpm • Plasticizing rate PS (nominal/max.): 144 / 226 g/s • Plasticizing rate PE (nominal/max.): 114 / 178 g/s _ACCUMULATOR (ZE)_ • Injection flow rate: 1,732 cm³/s _EQUIPMENT_ • Removable tie bar (retractable tie bar) • Euromap 67 – robot interface • 48 hot runner controllers • 8 pneumatic cascades • 6 hydraulic cascades • 2+2 cores • MC6 control panel _PROCESSED MATERIALS_ • PP, PC

Condition: excellent (used), Year of construction: 2004, ENGEL DUO 11050/2300 injection molding machine Manufacturer: ENGEL Model: DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 hours Clamping force: 23,000 kN / 2300 tons Screw diameter: 135 mm Injection volume: 8870 cm³ Control system: ENGEL Type: hydraulic, two-platen, large-size injection molding machine CLAMPING UNIT Clamping force: 23,000 kN (2300 tons) Dimensions of mounting plates: 2900 × 2500 mm Column spacing (H × V): 2000 × 1600 mm Minimum mold height: 700 mm Maximum mold height: 1890 mm Maximum distance between plates: 3800 mm Clamping system: hydraulic, two-platen INJECTION UNIT Injection unit: 11050 Screw diameter: 135 mm Injection volume: 8870 cm³ Injection shot weight (PS): 8071 g Maximum injection pressure: 1600 bar Screw replaced in 2011 Reinforced plasticizing unit, adapted for processing special materials ADDITIONAL EQUIPMENT Magnetic mold clamping system – functional 2 hydraulic cores 36 mold heating zones / hot runner channels 10 hydraulic cascades Mold tilting function ENGEL control system Robot: none MAGNETIC MOLD CLAMPING SYSTEM Rodpfx Apj Af Nkhedsch The injection molding machine is equipped with functional magnetic plates for quick clamping of injection molds. The system reduces machine changeover time and facilitates the exchange of large and heavy molds, making it an important piece of additional equipment for an injection molding machine of this class. TRANSPORT DIMENSIONS AND WEIGHT Weight of main unit: approx. 113,000 kg Weight of control cabinet and additional components: approx. 18,000 kg Total approximate weight: approx. 131,000 kg (131 tons)

Condition: excellent (used), Year of construction: 2011, clamping force: 23,000 kN, ENGEL DUO 23050/2300 – 2,300 T CC200 controll Clamping unit ▪ Clamping force: 23,000 kN (2,300 t) ▪ Tie-bar spacing: 2,000 × 1,600 mm ▪ Platen dimensions: 2,700 × 2,430 mm ▪ Opening stroke: 3,000 mm ▪ Max. daylight: 3,800 mm ▪ Mould height: 800–2,000 mm ▪ Max. mould weight: 62,000 kg ▪ Ejector stroke / force: 400 mm / 385 kN Injection unit ▪ Screw diameter: 135 mm ▪ Shot volume: 10,310 cm³ ▪ Injection pressure: 1,740 bar ▪ High-pressure configuration: 2,250 bar* ▪ Injection rate: 1,370 cm³/s (1,060 cm³/s at increased pressure) ▪ Max. screw speed: 85 rpm ▪ Nozzle stroke: 1,100 mm Rods Af Aafspfx Apdech Power & weight ▪ Pump drive power: 187 kW ▪ Standard heating power: 110 kW ▪ Oil capacity: 3,000 litres ▪ Clamping / injection unit weight: 102 / 28 t *High-pressure configuration subject to confirmation. Equipment ▪ CC200 A02 control with 15” colour touchscreen ▪ ENGEL ecodrive servo-controlled hydraulic drive ▪ S4V barrier screw, L/D 22 ▪ Wear- and corrosion-resistant bimetallic barrel, rated up to 350°C ▪ R10 ball-type non-return valve ▪ 5 hydraulic core pulls: 3 moving + 2 fixed platen ▪ 72 mould heating control zones ▪ Hydraulic valve-gate control: 10 circuits ▪ Pneumatic valve-gate control: 8 circuits ▪ Maximum mould height increased by 200 mm ▪ Platen ejector, type A ▪ Interchangeable centring rings: Ø250 mm on both platens ▪ Injection-compression moulding package PROFI ▪ ecograph energy monitoring ▪ Integrated ENGEL robot interface ▪ Digital interface for an external injection unit ▪ Interface for temperature controllers / hot-runner controllers ▪ Euromap 70.1 extension with RS485 ▪ USB and Ethernet connections ▪ Power supply: 400 V / 50 Hz Possible to buy with Engel VIPER robot

Condition: excellent (used), Year of construction: 2019, operating hours: 18,800 h, functionality: fully functional, machine/vehicle number: AAKJ4001, clamping force: 12,000 kN, screw diameter: 110 mm, clearance between the columns: 1,250 mm, column diameter: 220 mm, displacement volume: 5,701 cm³, injection pressure: 1,700 bar, injection weight: 5,244 g, mold height (min.): 500 mm, ejector force: 350,000 N, ejector stroke: 350 mm, opening stroke: 1,300 mm, plate length: 2,610 mm, plate width: 1,800 mm, plate height: 1,800 mm, total length: 13,200 mm, total width: 3,400 mm, total height: 3,500 mm, overall weight: 63,000 kg, heating capacity: 55 kW (74.78 HP), pressure: 178 bar, number of injections: 1, pump power: 204,000 W, power: 260 kW (353.50 HP), type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, input current: 512 A, Equipment: documentation/manual, The machine has been used sparingly and is in very good condition. It has been well-maintained. The machine only processes ABS and PP. The machine’s control system is B&R. The machine is equipped with numerous accessories, including 3 air valves, two hydraulic valves, a servo valve for table movement hydraulics, 22 tool heating zones, a water manifold with 8 zones, screw heater insulation, hydraulic screw rotation for torpedo replacement, a torpedo with a locking system, an interchangeable centering ring, a euro-map for the robot, a door with automatic opening, and an electrical cabinet with sockets. The machine also has water blocks on both the moving and stationary tables, each with 8 connections. In addition, several spare parts are included, such as a complete torpedo, a screw nozzle, heaters, temperature sensors, and specific seals for the hydraulics, as well as a self-filtration filter and a torpedo wrench and auxiliary ejector rods. A Wemo robot can also be sold with the machine; while it is not part of this listing, it can be purchased separately and added to the machine later. It was used with the machine and is adapted for it. Rcsdpoznbqqsfx Apdeh

Condition: excellent (used), Year of construction: 2024, ENGEL DUO 36060/2700 TECH INJECTION MOLDING MACHINE Year of manufacture: 2024 Clamping force: 27,000 kN (2700 tons) Robot: ENGEL VIPER 90 CLAMPING UNIT Clamping force: 27,000 kN Mold opening stroke: 3300 mm Maximum mold opening distance: 4100 mm Minimum mold height: 800 mm Maximum mold height: 2200 mm Column spacing (H × V): 2180 × 1750 mm Platen dimensions (H × V): 2970 × 2640 mm Opening force: 770 kN Opening force with hydraulic cushion: 1600 kN Dry cycle time (EUROMAP 6): 5.6 s INJECTION UNIT Redpfsz N Et Dsx Apdjch Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Injection volume: 24,100 cm³ Theoretical injection weight (PS): approx. 21.9 kg Injection rate: 2620 cm³/s Injection pressure (regenerative mode): 1300 bar Maximum injection pressure: 1600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Torque at maximum speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s INJECTION NOZZLE Nozzle stroke: 1300 mm Nozzle closing force: 210 kN EJECTION SYSTEM Ejector stroke: 400 mm Ejector forward force: 420 kN Ejector return force: 420 kN HEATING SYSTEM Number of heating zones (including nozzle): 12 Installed heating power: 160.9 kW DRIVE AND HYDRAULIC SYSTEM Installed motor power: 355 kW Motor power for charging pump: 3 kW Hydraulic oil tank capacity: 3500 l COOLING SYSTEM Required cooling capacity: 66.9 kW Water consumption (supply temperature 32°C): 5.88 m³/h ADDITIONAL EQUIPMENT Linear robot: ENGEL VIPER 90 Movable / pull-out guide column Hot runner control: 160 zones Hydraulic core control: 3 + 3 Cascade control: 72 channels

Condition: like new (used), Year of construction: 2023, HAITIAN JUPITER JU III 18500/22300 B Servo-Hydraulic 2-Platen Injection Moulding Machine CLAMPING UNIT Clamping Force: 18,500 kN (1,850 tons) Tie Bar Distance (H × V): 1,870 × 1,425 mm Platen Dimensions: 2,590 × 2,150 mm Minimum Mould Height: 650 mm Maximum Mould Height: 1,600 mm Maximum Daylight: 3,350 mm Opening Stroke: 2,700 / 1,750 mm Ejector Stroke: 450 mm Ejector Force: 450 kN Number of Ejector Positions: 33 Minimum Mould Dimensions: 1,310 × 1,000 mm INJECTION UNIT Screw Diameter: 150 mm Shot Volume (Theoretical): 12,017 cm³ Shot Weight (PS): 10,935 g Injection Rate: 1,583 g/s Maximum Injection Pressure: 1,840 bar (184 MPa) Injection Pressure: 1,610 bar (161 MPa) Injection Stroke: 680 mm Screw Speed: 0–85 rpm Plasticizing Capacity (GPPS): 176 g/s Plasticizing Capacity (HDPE): 294 g/s HYDRAULIC & ELECTRICAL SYSTEM Drive System: Servo-Hydraulic Pump Motor Power: 75 kW Total Pump Motor Power: 185 kW Heating Power: 118 kW Oil Tank Capacity: 1,750 litres MACHINE DIMENSIONS & WEIGHT Machine Length: 12,880 mm Machine Width: 5,410 mm Machine Height: 4,450 mm Total Machine Weight: Approx. 100,000 kg ADDITIONAL INFORMATION Machine Type: Two-Platen Injection Moulding Machine Manufacturer: HAITIAN Series: JUPITER III Rcedpjz Rqpmofx Apdoh Model: JU III 18500/22300 B

Condition: excellent (used), Year of construction: 2008, KRAUSSMAFFEI injection molding machine KM 1000-4300 MX SIDE INJECTION UNIT KM 380 BOLT-ON LRX ROBOT General Information Parameter Data Manufacturer KraussMaffei Model KM 1000-4300 MX Year of manufacture 2008 Serial number 61012454 Clamping force 11,000 kN (1100 t) Machine weight 54,000 kg Design Two-platen, hydraulic Rcsdpfx Aj Adpc Djpdeh Number of injection units 2 Additional unit KM 380 BO L (Bolt-On) Robot KraussMaffei LRX Note: The KM 1000 designation indicates a 1000 t class, while the stated clamping force of 11,000 kN corresponds to 1100 t. 2. Clamping Unit Parameter Value Clamping force 11,000 kN Dimensions of mounting plates (H x V) 2210 × 1910 mm Column spacing (H x V) 1550 × 1250 mm Minimum mold height 600 mm Maximum mold height 1200 mm Opening stroke 2000 mm Ejector stroke 300 mm FP / MP centering rings 250 / 250 mm Maximum mold weight – fixed platen 25,000 kg Maximum mold weight – movable platen 25,000 kg Maximum total mold weight 50,000 kg Main injection unit – unit no. 1 Parameter Value Screw diameter 80 mm L/D ratio 23 Injection volume 1810 cm³ Volumetric injection rate 503 cm³/s Maximum hydraulic pressure 190 bar Maximum specific injection pressure 2328 bar Screw stroke 354 mm Specified maximum screw speed 955.8 – to be confirmed by the unit Additional side injection unit – unit no. 2 KRAUSSMAFFEI KM 380 BOLT-ON Parameter Value Manufacturer KraussMaffei Type KM 380 BO L Year of manufacture 2008 Serial number 61011975 Unit weight 2500 kg Type Additional side injection unit Screw diameter 40 mm L/D ratio 20 Injection volume 204 cm³ Volumetric injection rate 161 cm³/s Maximum specific injection pressure 1860 bar Screw stroke 160 mm Specified maximum screw speed 391 – to be confirmed by the unit The additional side injection unit enables the implementation of multi-component processes, including 2K technology, provided that a suitable mold and control configuration are used. Robot and automation The machine is equipped with a KraussMaffei LRX linear robot, designed to automate the process of removing parts from the injection mold. The robot model, its year of manufacture, serial number, payload, and ranges of motion for the X, Y, and Z axes need to be confirmed based on the nameplate or documentation. Hydraulic equipment and control Equipment Quantity / parameters Hydraulic mold cores – fixed platen (FP) 2 Hydraulic mold cores – movable platen (MP) 2 Total number of hydraulic core circuits 4 Sequential injection control 16 zones Hot runner control 48 zones Main injection unit Ø 80 mm Side injection unit Ø 40 mm Robot KraussMaffei LRX Technological configuration The machine has two independent injection units, which allows it to be used in multi-component production. The configuration includes: • Main injection unit with an 80 mm screw. • Additional Bolt-On side unit with a 40 mm screw. • Four hydraulic core control circuits. • Sequential control of 16 zones. • Control of the mold hot runners – 48 zones. • KraussMaffei LRX linear robot • Transport data Element Weight KM 1000-4300 MX injection molding machine 54,000 kg KM 380 BO L side unit 2500 kg Total weight 56,500 kg

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel Rcodpfx Asy Tuhiepdsh - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: excellent (used), Year of construction: 2007, operating hours: 81,000 h, Technical Data Year of manufacture: 2007 Clamping side Clamping force: 1300 t Opening stroke/installation height max.: 2300 mm Rcodpfx Apj Afpalodsh Distance between clamping plates max.: 4000 mm Tool installation height min./max.: 1000 - 1700 mm Clamping plate max. height: 1910 mm Tool size min.: 1000 - 1700 mm Distance between tie bars: 1500 mm Nozzle radius: R40 mm Tool weight: 29000 kg Ejector stroke: 350 mm Injection side Screw diameter: 135 mm Injection volume: 8588 cm³ Injection pressure: 1390 bar Injection weight: 7729 g/shot Core pulls AWS/DS: 1/1 Needle gate pneumatic: 1 The machine is supplied with a Kuka robot and can be inspected during production.

Condition: excellent (used), Year of construction: 2015, ENGEL DUO 7050/1000 + Viper 120 RC300 Year: 2015 TECHNICAL DATA: • Clamping force: 1,000 tons Tie bar spacing 1420 × 1170 mm • Injection unit: 7050 • Screw diameter: 105 mm • L/D ratio: 22 • Bimetallic barrel • Control: ENGEL CC300 • ENGEL ecodrive SHV2 servo hydraulics • Power supply: 3×400V + N + PE / 50Hz OPTIONS: • 2× hydraulic core pulls on fixed platen • 4× hydraulic core pulls on moving platen • Total: 6× hydraulic core pulls • Core pulls with locking valves & pressure relief • Euromap 13 • 24-zone hot runner control • Max. hot runner heating capacity: 50 kW • Euromap 14 • 6× hydraulic valve gate control • Centering diameter: 250 mm • Through-hole in moving platen: 250 mm • Hydraulic shut-off nozzle • Electric screw drive • Ceramic barrel heaters • Barrel insulation • Interface for dosing/coloring unit • Separate cooling water connection for machine & mold Rsdpfjzxy Szox Apdsch • 20× flow regulators, 0–30 l/min • Mold temperature control circuits up to 95°C / 6 bar • PD-Graphic process monitoring • Ecograph energy consumption monitoring • Ethernet + USB • Process data logging ROBOT: ENGEL Viper 120 RC300 • Max. handling weight: 21 kg • X stroke: 1,200 mm • Y stroke: 1,900 mm • Z stroke: 4,280 mm • A/B/C servo axes, 70 Nm • Automatic central lubrication • Additional vacuum & compressed-air circuits • C70 handheld controller with 7” touchscreen CONVEYOR: ENGEL FB100 • 3,000 × 1,100 mm • Belt speed: 6 m/min • Adjustable height: 1,000–1,200 mm • Safety tunnel • Photoelectric sensor Including safety fencing and integrated robot interface.

Condition: good (used), Year of construction: 2004, clamping force: 23,000 kN, Clamping force: 2300 t Screw diameter: 135 mm Type: Horizontal Drive: Hydraulic Injection Moulding Machine – ENGEL DUO 11050/2300 Year of manufacture: 2004 Operating hours: 70,029 h 🔧 Clamping Unit Clamping force: 2300 kN Platen dimensions (H × W): 2900 × 2500 mm Distance between tie bars (H × V): 2000 × 1600 mm Min. / Max. mould height: 700 – 1890 mm Maximum opening stroke: 3800 mm 💉 Injection Unit Screw diameter: 135 mm Injection volume: 8870 cm³ Shot weight (PS): 8071 g Injection pressure: 1600 bar ⚙️ Additional Equipment and Features Screw replaced in 2011, reinforced type – suitable for special materials. Option for two-component injection (2-shot). Mould tilting function. Magnetic platens. 2 hydraulic core pulls. 36 heating zones for the mould. 10 hydraulic cascade zones installed (expandable). Machine interface languages: English, German. Dimensions and Weight Net weight (including control cabinet): approx. 131 t (machine 113 t + control cabinet 18 t) Engel 2300 tonnes - 2004. Screw replaced in 2011. Reinforced screw for special materials. Rjdpfx Apjz Rplyedoch Can be injected twice. Option with mould tilting. Magnetic plates. 2 hydraulic cores. 36 heating zones for the mould 10 hydraulic cascades installed in the machine, there are more Screw diameter 135 mm Languages in the machine: English, German Machine without robot , machine in excellent condition

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: X82600, clamping force: 12,000 kN, screw diameter: 150 mm, clearance between the columns: 1,200 mm, displacement volume: 12,193 cm³, injection pressure: 1,500 bar, injection weight: 11,584 g, opening stroke: 1,400 mm, Used Stork IMM 12000-19000 injection molding machine. Rcedpfxjwhkfyj Apdjh

Condition: excellent (used), Year of construction: 2008, KRAUSS MAFFEI KM 1000-4300 MX *General* Year of manufacture: 2008 Rcsdpfxsz Eu Uuo Apdsh Control: MC5 Clamping force: 11,000 kN Quick mould change: bolt holes *Clamping unit* Mould height min/max: 600 / 1,200 mm Platen size (H x V): 2,210 x 1,910 mm Tie bar distance (H x V): 1,550 x 1,250 mm Opening stroke: 2,000 mm Ejector stroke: 300 mm Locating ring FP/MP: Ø250 / Ø250 mm Max. mould weight FP/MP/total: 25 t / 25 t / 50 t *Injection unit 1 (main)* Screw diameter: 80 mm L/D ratio: 23 Shot volume: 1,810 cm³ Injection rate: 503 cm³/s Max. hydraulic pressure: 190 bar Max. injection pressure: 2,328 bar Screw stroke: 354 mm *Injection unit 2 (2K)* Screw diameter: 40 mm L/D ratio: 20 Shot volume: 204 cm³ Injection rate: 161 cm³/s Max. injection pressure: 1,860 bar Screw stroke: 160 mm *Peripherals* Core pulls FP/MP: 2 / 2 Sequential valve gate control: 16 zones Hot runner zones: 48

Condition: good (used), Year of construction: 2013, clamping force: 16,000 kN, Equipment: documentation/manual, Clamping force: 1600 t Screw diameter: 135 mm Rcsdpfxoyh I Eme Apdoh Distance between tie bars V: 1420 mm Distance between tie bars H: 1870 mm Shot volume: 9662 cm3 Type: Horizontal Drive: Hydraulic

Condition: like new (used), Year of construction: 2024, clamping force: 27,000 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Rcjdszvc N Ropfx Apdjh Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: used, Year of construction: 2021, operating hours: 5,048 h, functionality: fully functional, machine/vehicle number: 245467, ENGEL DUO 17060/2000 injection moulding machine with ENGEL Viper 60 robot (robot working area, conveyor belt) – year 2021 For sale: ENGEL DUO 17060/2000 injection moulding machine, year of manufacture 2021, in excellent technical condition. The machine has been regularly serviced and operated in stable production conditions. Technical data and information: - Manufacturer: ENGEL - Model: DUO 17060/2000 - Clamping force: 2000T - Year of manufacture: 2021 - Operating hours: 5048 h - Type: two-platen injection moulding machine - Condition: very good, fully functional Additional equipment: - ENGEL Viper 60 robot – perfectly matched to the machine, ready for direct integration into a production line, robot working area, conveyor belt. Offer advantages: - Low number of operating hours - Modern, energy-efficient design - High process repeatability and precision - Complete package: injection moulding machine + robot, robot working area, conveyor belt Rjdsycc N Sspfx Apdjch Ready for immediate commissioning

Condition: excellent (used), Year of construction: 2008, Krauss Maffei KM 1100–12000 MX injection molding machine Year of manufacture: 2008 Robot: Wittmann Control: MC5 Equipment Fully hydraulic clamping unit MC5 control with color monitor Integrated operator panel 3 USB ports Plasticizing unit for thermoplastic materials Screw Ø 120 mm with abrasion protection Check valve Open nozzle Clamping unit Clamping force: 11,000 kN Opening force: 770 kN Platen dimensions: 2210 × 1910 mm Distance between columns: 1550 × 1250 mm Opening stroke: 2000 mm Minimum mold height: 600 mm Maximum mold height: 1200 mm Maximum opening: 2600 mm Rjdpfx Apozkanyodsch Ejector stroke: 300 mm Ejector force: 220 / 110 kN Injection unit Screw diameter: 120 mm Injection pressure: 1758 bar Injection volume: 6786 cm³ Injection weight (PS): 6175 g Screw speed: 103 / 145 rpm Injection rate: 1118 cm³/s Injection rate with accumulator: 1696 cm³/s Plasticizing unit Designed for processing thermoplastic materials Version with abrasion protection Check valve Open nozzle Electro-hydraulic system Pump motor power: 132 kW Heater power: 82 kW Number of heating zones: 7 Number of dry cycles (Euromap): 802 cycles/h Oil tank capacity: 2440 l Dimensions and weight Dimensions (L × W × H): 12.47 × 3.65 × 2.82 m Weight: 73 t

Condition: good (used), Year of construction: 2005, clamping force: 27,000 kN, Equipment: documentation/manual, KraussMaffei KM 2700 MX – SP 12000 / Screw Ø120 mm MC5 controll Clamping Unit * Clamping force: 27,000 kN / 2,700 t * Mold opening force: 1,890 kN * Moving platen force, opening/closing: 342 / 294 kN * Platen dimensions: 3,020 × 2,600 mm * Distance between tie bars (H × V): 2,100 × 1,700 mm * Opening stroke: 3,000 mm * Mold height min./max.: 900 / 2,000 mm Rcjdpsznwt Isfx Apdeh * Maximum daylight: 3,900 mm * Ejector stroke: 400 mm * Ejector force forward/backward: 400 / 200 kN Injection Unit – SP 12000 Screw diameter: 120 mm * L/D ratio: 23 * Maximum injection pressure: 1,758 bar * Stroke volume: 6,786 cm³ * Shot weight PS: 6,175 g * Injection flow rate: 1,118 cm³/s * Screw speed nominal/max.: 100 / 141 rpm * Plasticizing rate PS at nominal speed: 169 g/s * Plasticizing rate PE at nominal speed: 131 g/s * Plasticizing rate PS at maximum speed: 239 g/s * Plasticizing rate PE at maximum speed: 184 g/s * Nozzle contact force: 166 kN Electro-Hydraulic Equipment * Pump motor rated power: 132 kW * Installed heating capacity: 84 kW * Barrel heating/control zones: 7 * Dry cycle rate according to Euromap 6: 356 cycles/h * Dry cycle time according to Euromap 6: 10.1 s * Oil tank capacity: 2,440 l Dimensions & Weight * Net weight incl. control cabinet: 168 t * Dimensions (L × W × H): 14.73 × 5.03 × 3.74 m * Maximum mold weight: 72,000 kg With Electric Screw Drive * Screw drive power: 147 kW * Screw speed nominal/max.: 100 / 158 rpm * Plasticizing rate PS nominal: 178 g/s * Plasticizing rate PE nominal: 137 g/s * Plasticizing rate PS maximum: 267 g/s * Plasticizing rate PE maximum: 206 g/s With Accumulator (ZE) Injection flow rate: 1,696 cm³/s Equipment: 4 cores hydraulic - moving platen 16 hydraulic cascades 6 pneumatic cascades Hotrunnrer controllers: 48 removable tie bar Software for Extrusion