7
We produce knives for shredders
We make standard knives and from sent diagrams
Knives for Weima, Zerma,Lindner ,Untha ,Tria,Vecoplan,Gross-Gaz,Genox
Stator (fixed) and rotor knives
Bp9mprzq7i
1
engine output:4,0 kW
X2gfo
Feeding opening:250 x 385 mm
ginding chamber dimensions:250 x 385 mm
number of rotor knives:18 Stk.
number of stator knives:2 Stk.
dimensions:1.120 x 725 x 1.655 mm
weight of the machine ca.:ca. 410 kg
suitability:Angüsse
Payment: 100% prior to delivery
7
WEIMA cutting mill
Engine power 37 kW
Voltage 400 V / 50 Hz
Rotor diameter 300 mm
Rotor width 500 mm
Rotor knife 3
Counter knife 2
Q3g9wthv
Rotor revolutions 450 rpm
sieves 8 /10 /12 mm
Output per hour 300 - 500 kg
3
No. 2569
1 used, functionally tested granulator
Manufacturer: DREHER
Type: S 60/100 GFS
Motor: 75 kW
working width: 1000 mm x Rotor Ø 600 mm
Throw shaft : 1000 x 600 mm
5x Rotor – 3x Stator Knifes
Output: 500 to 2.000 kg/h depending Material - / Sieve
Sieves-Ø 6,10,12 or 14 mm
incl.Control board and Hydraulic pack
The Granulator can be inspected in our workshop Wuppertal-Germany. Date by appointment.
More granulators and shredders ex workshop available :
TRIA
Herbold
E...
7
3 Rotor, 2 Stator Knifes, Knifes and Rotor in very good Conditions, Screen is 12 mm, Mill is made in 1976, low Working hours, used for Rubber, Motor 30 Kw., with Blower, Weigth is approx. 2500 kgs.
Bkzi0qhc
stored in 68526 Ladenburg
6
Horizontal plastic mill VEB GS 300 X 400 made in Germany.
Ciji8pyuc
Technical data :
- knife chamber diameter: fi 300 mm
- knife length: L-400 mm
- dust extraction / separator
- main engine revolutions: 1450 rpm.
- engine power: 12 kW
- weight: approx. 600 kg
- additional sieve included in the price of the mill: 1 pc.
3
Single shaft shredder for RDF , FILM WASTE
-WTB48150R: drive 90kw , rotor length 1500mm , diameter 480mm
-WTB48200R: drive 75kw+75kw , rotor length 2000mm , diameter 480mm
-WTB48250R: drive 90kw+90kw , rotor length 2500mm , diameter 480mm
-The dimension of Rotor knives and Stator knives are 60x60mm.
-Microcomputer technology incorporating rotator speed variations with start, stop and reverse features.
-Automatic reverse sensors to protect the machine against over loading and jamming.
-Engineere...
The special! The grinding material falls into the centre of the rotor, which is fitted with a vertical cutter which cuts up the crushed material and transports it into the rotor. 3 rotating and 4 fixed knives.
Very stable cast iron construction, the knives are well sharpened and
The mill was regularly inspected by the supplier, but without inspection book and documentation.
Bgqg2003ib
5
Circular vibrating screening plant, screening machine, vibrating screen, vibrating screen, vibration motor, shaker
-Condition: used, according to pictures
-3 grits can be sieved
-first sieve: 4 x 70 mm
-Second sieve: 1 x 40 mm
Cfntdwgo
- Suction tube holder: O 210 mm
- Feed hopper: 700 x 295 mm
Oscillating conveyor motor: JOST type V 24 140/4
-Power: 3.6 kW
-Dimensions: 3020/1340 / H2120 mm
-Weight: 1540 kg
15
Very robust mill from Alpine
Bindmiohcf
Connected load 7,5 kW
grinding chamber 500 x 350 mm
Three rotor blades + one crowbar
7
Power: 30 KW
Accessories:
Chdipyec
Suction unit MFI 18/180, suction blower 1,5 KW, 3 sieves, 1 air classifier, sorting table on filling level.
6
Horizontal mill for plastics CUMBERLAND 812 SE.
Technical data :
- knife length: L-300 mm
- diameter of the knife chamber: fi 250 mm
- main engine revolutions: 1450 rpm.
Bpxpkmpn9z
- engine power: 4 kW
15
Machines offer (knives mill , granulator)
-rotor diameter from 260mm to 800mm
-rotor length from 600mm to 2400mm
-main motor from 15kw to 250kw
-different types of rotors
- option : hydraulic vertical pusher
Bp9mjjq0yt
PC2660: drive 15/18.5kw , rotor length 600mm , diameter 260mm
Bp9mfxcxih
PC3260: drive 22/30kw , rotor length 600mm , diameter 320mm
PC3280: drive 30kw , rotor length 800mm , diameter 320mm
PC4280: drive 37kw , rotor length 800mm , diameter 420mm
PC42100: drive 45kw , rotor lengt...
8
The specialist for brittle materials
The toothed roller mills of the Xtra series are designed as beside-the-machine mills for applications with brittle and glass fibre reinforced materials.
3 grinding chambers with primary crusher
rotor speed approx. 30m/min
Busggwnm
Harting connector equipped for the impulse of the machine
5
Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine
-Perforation: 65 x 65 mm
-Recording holes: Ø 75/30 mm
-with supporting ribs
-Drawing with the pictures
-Dimensions: 1600/1844/H620 mm
-Weight: 696 kg
Fqzcpij
6
rotor width: mm
rotor diameter: mm
Tube dia. of the Feeder:
Number of working hours: ca. 700 h
number: Rotormesserhalter: 5
number: Stattormesserhalter: 4
Rotor-Ø: 440 mm
material: PET
control voltage: 24 VDC kW
Cutting mill (shredder)
The plastic granulator is intended for industrial use.
Application: Size reduction of all kinds of plastics, such as ABS, POM, PA6, PE, PP, PG and PET
Plant consists of a granulator with belts and a bottle bunker.
Material is fed into the bunker via feeding belt...
4
Cylindrical mill Goliath Plus 3 IMD PRODUCER:
Mo.Di.Tec
General information:
- Slow-speed
- ensures consistent, high quality grinding with low dust content
- very quiet operation
- no thermal damage to the ground milling
- easy handling and cleaning
- very low energy consumption
- Cardan's drive: flexible star clutch; perfectly dampens vibrations in the grinding chamber and protects the mill engine
- milling tank with rotating pipe stub for automatic emptying (diameter 38 mm)
- electrical box ...
1
engine output:4,0 kW
Bnrtnsa3zl
Feeding opening:170 x 300 mm
ginding chamber dimensions:170 x 300 mm
number of rotor knives:12 Stk.
number of stator knives:2 Stk.
dimensions:1.210 x 520 x 1475 mm
weight of the machine ca.:ca. 165 kg
suitability:Angüsse
Payment: 100% prior to delivery
15
Einwellen-Zerkleinerer Shredder
Machines offer (single shaft shredders)
-rotor diameter from 220mm to 660mm
-rotor length from 600mm to 3000mm
-main motor from 18.5kw to 160kw +160kw
-hydraulic pusher
sample machines:
WT2260: drive 18.5kw , rotor length 600mm , diameter 220mm
WT3080:drive 30kw , rotor length 800mm , diameter 300mm
Cqfsm3qku
WT4080:drive 37kw , rotor length 800mm , diameter 400mm
WT40100:drive 45kw , rotor length 1000mm , diameter 400mm
WT40120:drive 55kw , rotor length 1200mm ,...
2
BJ. 1974, functionality unclear, price against bidding
Oqpwz
10
The side mill has 2,2 KW, the sieve 8mm and the knives are in good condition.
The mill has 2 feed chutes
Bo23wxhygh
1
Connected load: 5.5kW.
Mzuwuywr
3
Feed opening: approx. 780 x 980 mm
Rotor width: approx. 980 mm
Rotor diameter: approx. 600 mm
Rotor knives: 4 x 2
Stator knives: 2
Bpbhxkpgac
As new, run for approx. 20 hours only
8
I am selling a pulverizing mill Pallmann PP6:
- solid condition
- the drive of the mill is 2 x electric motor 15 kW
- water cooling
- segments knives
suction electric motor 4 kW
Gwjrq0
set including cyclone, control panel and 3 x set of knives
1
beside the press granulator (art.10064)
Zahnwalzenmühle J2/ CJ5
year: 2011
power: 2,2 kW
application: J2/ CJ5
feed opening: 250x330 mm mm
Bo3dtr9bbm
rotor- Ø: 120mm
rotorb width: 320mm
price: 2.950 Euro
contact: Mr. Rainer Eckerle
4
Disc wheel mill, last inspection 2016, incl. sieves and set of knives, year 1995
F8kikm8t
4
Motors are suitable for Wanner mills type 17.31
Sb09vt37
15
Enclosed we offer various granulators, available per piece or as a lot.
1x Foil granulator (inlet included)
Bogqdkxajc
1x Rapid Typ 20
2x Colortronic M1021 (extra knives and sieves included)
1x Rapid Typ 75E
1x Rapid Typ GK 2218
1x Powtek Table granulator
1x Blackfriars engineering
3
Feed opening: approx. 370 x 490
Rotor width: approx. 490 mm
Rotor diameter: approx. 300 mm
Stator knives: 3
Rotor knives: 5
Bpbhoml7he
Including second-hand control cabinet
7
LINDNER ANTARES 1300
SINGLE SHAFT SHREDDER
ROTOR LENGTH: 1300MM
Tpgvrgve
MAIN MOTOR :55KW
MACHINE IN A VERY GOOD TECHNICAL CONDITION
1
beside the press granulator (art.10067)
Wittmann Zahnwalzenmühle J1
year: 2004
power: 1,5 kW
application:
feed opening: 250x200 mm
Biizzmau
rotor- Ø: 120mm
rotorb width: 200mm
price: 2.450 Euro
contact: Mr. Rainer Eckerle
8
Plastics Mill
Bov77d830a
Brand :Dipre
year of construction ca 2010
WEEK 2,2
7
Who has machines;
newly ground knives
5mm sieve
Bof83s0dpk
Suction box
Mobile
5
good working condition, motor was replaced some years ago,
4kW, 400 / 480 or 690 Volts possible. 50 or 60 Hz, two sets of
knives and other parts available, also manual.
Endyu3z
2
Profile granulator (with self-feeding behavior)
Drive: 45 kW
With long parts funnel and short parts funnel
Rotor diameter: approx. 450 mm
Working width: approx. 600 mm
Blade rows rotor: 9
Row of knives stator: 2
X8uko
4
Pallmann Finemill PP6S
for Finegrinding of PVC,PP, PET and more.
Motors: 15/30 kw., incl. Dosing, Frame mounted
Mill is Watercoolable
Bosjprecpl
1
beside the press granulator (art.10066)
Digicolor / Moditech Goliath Mini 2
year: 2008
power: 0,37 kW
application:
feed opening: 134x176 mm
rotor- Ø: 118mm
rotorb width: 176mm
price: 1.350 Euro
contact: Mr. Rainer Eckerle
Oopcv
5
Plastics Mill
Brand:Dipre
year of construction ca 2010
Bov73hll77
Kw 2,2
7
The machines are in good condition;
The mill stands on a high frame
Bof82wgsth
The knives are sharpened
The sieve has a 5mm hole
6
Manufacturer: Colortronic
Mqzub
Type: M-103-T-2, 2kW
Technical details:
Total weight: approx. 530 x 710 x 850 mm (WxDxH)
Trichtermasse: approx. 205 x 315 mm (Wxd)
Bath outlet pipe diameter: 40 mm
Roles: 4 swivel castors, 2 with brake
Mains voltage: 400 V
Power consumption: 5.2 A
Frequency: 50 Hz
Power: 2.2 kW
Engine speed: 1.435 U/min
2
Cutting mill / Granulator
brand: NEUE HERBOLD
manufacturing year: brand new machine
drive: 37 kW
Rotor-width: 300 mm
Working-width: 800 mm
Rotor with 3 blade-rows
2 stator-blade rows
Roller feed hopper
S7wlnh
Size reduction of film, hollow containers, barrels, boxes, pipes, profiles,...
2
Motor power: 17.8kW, compressed air supply: 10bar.
Sqo30389
1
beside the press granulator (art.10065)
Digicolor / Moditech Goliath Mini 1
year: 2008
power: 0,25 kW
application:
feed opening: 134x114 mm
Bhn9prv0
rotor- Ø: 118mm
rotorb width: 114mm
price: 1.250 Euro
contact: Mr. Rainer Eckerle
4
Bei der Herstellung von tiefgezogenen Verpackungsmaterialien fallen kontinuierlich Stanzgitter an, die mit dem Ultra-Granulator PS-T zerkleinert werden können.
Infeed opening height: 405 mm
Infeed opening width: 850 mm
Rotor diameter: 300 mm
Motor: 30 kW, 50 Hz
Eza9bsj
8
The tooth roller mill is in good condition, but the rollers need to be replaced.
The shaft has the opening dimensions : 240mm x 360mm
Bmnv32hueg
The machine can also accept organ donors
7
Grinder of blades, with cutting chamber: 1430 x 600 mm. Open rotor with 5 rows in the inclined cutting rotor. Engine: 160kw. Electric panel.
Otvu8uji