Injection molding machine

BATTENFELD HM 90-210

Condition: good (used), Year of construction: 2010, clamping force: 900 kN, screw diameter: 30 mm, displacement volume: 106 cm³, injection pressure: 2,042 bar, BATTENFELD HM 90-210 Stock No.: 503670 Manufacturer: BATTENFELD Model: HM 90-210 Control unit: UNILOG B6 Year of manufacture: 2010 Technical Data - Clamping Unit Clamping force: 900 kN Gkodsyglw Tepfx Anmja Tie bar spacing (HxV): 420 x 370 mm Platen size (HxV): 630 x 613 mm Minimum mould height: 450 mm Maximum mould height: 925 mm Maximum platen distance: 925 mm Opening stroke: 475 mm Ejector stroke: 150 mm Ejector force: 41 kN Moving platen centering diameter: 125 mm Fixed platen centering diameter: 125 mm Maximum mould weight: 800 kg Technical Data - Injection Unit Screw diameter: 30 mm Shot volume: 106 cc Injection pressure: 2042 bar Screw L/D ratio: 22 l/d Screw stroke: 150 mm Screw speed: 372 rpm Screw torque: 490 Nm Plasticizing rate: 14 g/s PS Maximum shot weight in air: 103 g/s PS Number of heating zones: 4 Nozzle stroke: 250 mm Dimensions & Weight Machine dimensions (LxWxH): 3.7 m x 1.5 m x 2.1 m Total weight: 4100 kg Equipment / Features Display language: German Hydraulic core pullers: 1x Leveling elements Ethernet interface EUROMAP 13 interface EUROMAP 67 handling interface Interface for dosing unit Interface for handling Interface for temperature control unit

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Godpfjw Rqwtjx Anmeka

Condition: good (used), Year of construction: 2008, Ref. no.: 18643 Manufacturer: ARBURG Type: 470 C 1500-400 Golden Editions Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requiring high quality standards. Gkjdpfxexvy Rls Anmea Key advantages of this series include: * Robust and durable construction * High process stability and repeatability * Reliable ARBURG control system * Good availability of spare parts * Suitable for continuous industrial operation The Golden Edition version also stands out with its enhanced performance and excellent price-performance ratio in the used machinery market. Thanks to its versatility, this machine is widely used in industries such as automotive supply, technical plastic parts, and serial production.

Condition: used, Year of construction: 2017, Arburg 470S 1100 290 injection moulding machine, year 2017 Gkedpfx Aew D R N Rsnmoa 2-component machine The machine has been idle for quite some time. It is from 2017 and has only around 21,600 operating hours. The machine has a clamping force of 1100 kN; the lower unit is a 290 with a 35 mm screw, and the upper unit is a 100 with a 30 mm screw. Only ABS and TPE have been processed so far. The machine is equipped with an integrated hot runner system and 3 core pulls, along with additional options. Included is a Kuka handling unit, which is operated via the Selogica control of the machine, as well as the complete safety enclosure. The two material loaders and the large conveyor belt are not included in the sale.

Condition: excellent (used), Year of construction: 2015, operating hours: 68,946 h, functionality: fully functional, In operation Hours: 68946 h. Clamping force: 1500 kN Clamping unit 520 H Opening force / stroke: 450 mm. Fixed / variable mould mounting height: 250-550 mm. Fixed / variable platen spacing: 700-1000 mm. Column spacing: 520 x 520 mm Mold clamping platens (width x height) 695 x 695 mm. Weight of movable mould half: 1000 kg max. Force – Ejector stroke: 40 kN – 175 mm Idle cycle time: Conformt Min 1.5 – s- 364 Screw diameter: 40 mm. Effective screw length: 20 L/D Screw stroke: 160 mm. Calculated injection volume: 201 cm3 Weight per injection: 184 g. Ps. Material flow rate: 29 kg/h. PS Injection pressure: 2000 s-bar Post-pressure time: 45-2000 s-bar Injection flow: 214 cm3/s Injection speed: 170 mm/s Power – heating zones: 9.7 kW – 5 Oil capacity: 160 l. Weight: 6700 kg. Height: 2215 mm. Length: 4672 mm. Complete installation also available: Injection moulding machine + WITTMANN W818-2066 (2013) Robot + Conveyor belt Robot WITTMANN W818-2558 (2013) Gkjdpoyab R Nofx Anmoa

Condition: ready for operation (used), Year of construction: 2015, clamping force: 1,600 kN, This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details. Gjdpsyxdwdjfx Anmjka • Injection units and plasticizing • 1st injection unit: • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • 2nd injection unit: • 2nd injection unit 290, vertical • Complete thermoplastic cylinder, 30 mm, highly wear-resistant • Open nozzle 30 mm with nozzle tip; extended nozzle tip +20 mm; radius 15 • Heating band for open nozzle • Nozzle contact force controlled, programmable • aXw Control ScrewPilot • Standard worm gear coupling; coupling geometry: double-sided • Multi-component processing; parting line setup on short runners for 2nd injection unit • Injection closing with mold (“flying injection”) • Drive, hydraulics, and cooling • 65 l/min charging flow rate • Pressure accumulator module, 64 l storage volume (max. 230 bar); accumulator drive • Continuous oil cooling and filtration; increased cooling capacity • Machine cooling circuits controlled • Clamping system, ejector, and core pulls • Clamping plate set; central Ø 125 mm • Minimum installation height 450 mm (extended) • Ejector pressure P/Q controlled (requires T2); ejector cross • Core pulls: • Core pull 1 simultaneous movement (P/Q controlled, programmable) • Core pull 2 simultaneous movement (P/Q controlled, programmable) • Core pull 3 simultaneous movement (P/Q controlled, programmable) • Pneumatic core pull control 4 incl. pressure reducer • Electric core pull control 1 (requires VE 436/00) • Tool pneumatics/hydraulics connections • Electrical connection pneumatic NVD 1 (in tool) • Electrical connection pneumatic NVD 2 (in tool) • Electrical and hydraulic connection NVD 3 (in tool) • Electrical and hydraulic connection NVD 4 (in tool) • Blow-out device 1 with pressure reducer; connection for blow-out device 2 • Cooling water and mold circuits • Shut-off valve for cooling water (inlet); shut-off valve for cooling water (inlet 2) • Cooling water filter 100 µm (inlet) • 3 cooling water circuits to fixed mold plate; 3 cooling water circuits to moving mold plate • Basic equipment for 2nd cooling water distributor (manual) with 7 free cooling circuits • Control and electrics • Selogica direct control; technology level • Fuse protection for heating circuits (1–6 with 16 A) • 15 electrical heating circuits for mold heating • Boost function for heating circuits (hot runner) • Upper guard open, raised to safety clearance • Fault indicator with flashing light • Operator authorization with chip card (EUROMAP 65) • Interfaces and connectivity • Interface for conveyor belt (machine base) • Prepared for six-axis robot with SELOGICA interface • Robot interface (EUROMAP 67), 50-pin • Emergency stop interface (24-pin, 2-channel) • Basic equipment for electric axis control • Host computer interface OPC-UA • Temperature control unit interface (20 mA); temperature control cable HB-THERM • Serial printer interface USB; external USB keyboard interface

Condition: excellent (used), Year of construction: 2009, operating hours: 78,099 h, functionality: fully functional, clamping force: 1,600 kN, screw diameter: 25 mm, clearance between the columns: 520 mm, displacement volume: 71 cm³, injection pressure: 1,550 bar, injection weight: 65 g, opening stroke: 925 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, Arburg 520 S 1600 290/70 2K incl. Multilift H – a well-maintained, fully functional 2-component injection molding machine. The machine comes from a top-notch production facility. According to the operator, machine availability was always a top priority: the system was regularly and carefully maintained and operated continuously with additional oil filtration. It is in very good, operational condition and can be put into operation shortly after connection. Equipment and technical highlights: • Year of construction 2009 • 12.3 million cycles / 78,099 operating hours in automatic mode • 2-component version with horizontal injection unit 290 and vertical injection unit 70 • Injection unit 1: screw diameter 25 mm, max. 71 cm³ • Injection unit 2: screw diameter 18 mm, max. 21 cm³ • Opening stroke 925 mm • Electric rotary table • 12-zone hot runner system integrated • 3 x core pull • 2 x blow-out, including control for needle valve • Interfaces for temperature controllers and dryers • Various customer-specific inputs and outputs Including Arburg Multilift H, load capacity 6 kg: • 2 x vacuum • 5 x double-acting grippers • Z-axis servo, 800 mm • C, G, X, and B axes pneumatic • Various inputs and outputs, including gripper monitoring The machine is fully functional. Documentation/manual available. Gkedpfx Ansxzix Asmja An excellent opportunity for a user looking for a well-maintained and immediately usable 2K injection molding machine with automation.

Condition: used, Year of construction: 2010, Injection molding machine Arburg Allrounder 470 H 1000-170, year 2010 Clamping force: 1000 kN Screw diameter: 30 mm Screw length: 930 mm Gjdsw E Ev Uopfx Anmeka Shot weight: 77 g With Arburg robot The machine can be inspected under power at any time!

Condition: excellent (used), Year of construction: 2014, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Opening stroke: 500 mm Distance between platten:(b x h) 570x570 mm Clear column spacing: 420x420 mm Ejector stroke: 175 mm Ejector force: 40 kN Hydraulic pump: 23,9 kW Screw: 35 mm, screw: L/D 20, 30 % glass Max wept volume 144 cm3 Mth: 35047 pump L x W x H: 3700 x 1650 x 2600mm Weight 3650 kg Language: CZ, English, German Condition: machine is excellent condition Gkjdpfszilqkex Anmoa working untill 30 CW 2024, now not under power

Condition: good (used), Year of construction: 2010, 420 C 1000 - 290 Thermoplastic cylinder, complete, 40 mm, highly wear-resistant Selogica direct control system Hydraulic system with 2 control pumps Anniversary model GOLDEN EDITION Thermoplastic processing Open nozzle, 40 mm Nozzle tip for open nozzle Heating band for open nozzle Clamping plate set 420, central, Ø 125 mm Connection for blow-out device 1 Selection unit, lateral installation, including connection Core pull, 1 for serial movement, holding pressure via check valve Interface for robot system (according to EUROMAP 67), 50-pin Socket distribution: 1 CEE, 1 Schuko, additional Interface for printer, serial USB CompactFlash interface for data set storage User authorization with chip card according to EUROMAP 65 Fault indicator, acoustic 3 electrical heating circuits for tool heating Interface for coloring device 4 freely adjustable cooling circuits Machine-specific cooling circuits, freely adjustable Equipment package: Extended monitoring Equipment package: Extended movement sequences Equipment package: Production control Gsdpfozi A N Djx Anmoka Equipment package: Optimization / operating aids Equipment package: Quality assurance Equipment package: Documentation CD with operating manual and parts list Without granulate hopper 50 L